Repository file acts differently in another enviroment

Hi,
We are using OBIEE 10.1.3.4. We have combined multiple facts in single Subject area. It works fine in our "development enviroment" (Does joins only when needed). However when i transfer this Repository file to our "testing enviroment" it creates unnessary joins. Has anyone seen this kind of behaviour and know where the problem is? How can i trouble shoot this ?

Hi,
When you notice that the BI Server is unnecessary joins, the first point of suspicion is the "LTS".
Most of the times, we might be combining many tables to one logical table. In this case, we should almost have one LTS for each table and also LTS for combining table.
Suppose, two tables "A" and "B" are merged into one but with only one LTS as "A inner join B". So, when a report requests for columns from "A" alone, the BI Server still does the inner join with "B" because it has got no other way to go.
I suspect the same thing in your case too. Hope this helps.
Thank you,
Dhar
Edited by: Dhar on 07-May-2012 03:05

Similar Messages

File looks different on another PC

Hello there, I am using Fireworks CS5 both at work and home for web layouts. The problem is when I get a file I worked on at work to finish up at home, the file looks different. Lots of the layers are decolored, and that becomes a big problem when we are talking about a complex and precise gradient. Both PCs have the same version of Fireworks. Any help?

The problem is likely be the difference in the monitors themselves. Have you calibrated them?
http://www.pcworld.com/article/241957/how_to_calibrate_your_monitor.html

How can I move the ODI Work Repository from one server to another server?

How can I move the ODI Work Repository from one server to another server?

Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you.

How ATTACH multiple files from different folders in one ATTACH 'session'?

Hi,
In Mac Mail, I often have to attach 2 or 3 separate files, all from different folder locations on my hard drive.
This requires clicking attach, selecting file 1 and clicking OK, which closes the Attach dialog.
Then I have to do it again 2 times for each other file. oy.
Is there a way to Highlight multiple files in different directories (ala Command-Select...which doesn't work) before selecting OK?
OR
I've found that I can DRAG a file from the Attach dialog into the email and the dialog will remain open, only the file is HIGHLIGHTED in the email and , hence, gets replaced by the next file I drag into the email (or select by the normal method)....
Is there a way to drag that file#1 into the email and have it NOT remain highlighted, so that I can pick another file to add in addition to that one?
Thanks!

ShizzleFizzle wrote:
Is there a way to Highlight multiple files in different directories (ala Command-Select...which doesn't work) before selecting OK?
Have you tried dragging files from Finder windows into the mail message window?

IPod cannot be updated/restored/ejected--files in use by another app

Since I downloaded iTunes7, I cannot update, restore, or eject my iPod from iTunes. I get the error "<iPod name> cannot be updated(restored, ejected) because it contains files in use by another application." I'm still able to sync music and tv shows with the old iPod software, but not movies. I eject it using the Safely Remove Hardware icon in my system tray, or from My Computer. I've tried disabling security programs and peripherals, and even sifting through the processes in Task Manager. I had no trouble ejecting prior to iTunes 7/7.0.1.
And yes, I've done the R's I'm able to do (Restore is not an option due to the nature of the error).

Hi again, Corey!
In regard to "recovery mode" message, you'll most likely just need to restore your iPod. For more details, read here -> Restoring your iPod
If this message persists after restoring your iPod, try assigning your iPod a different drive letter; see these steps below:
Log off of any other users on your computer.
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod with network device / Changing drive letter
I hope this helps you!
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Problem in opening excel file in different window

hi
i want to open excel file in different window it open in same window properly on the bases of condition but when i try to open in different with window.open( )
it give error that file has already used or path not exist OR requisted site either unavailable
how can i rectified

Hi.
I am too facing the same problem. I am using Jakarta Poi to display my resultset in an excel sheet directly(and not into a jsp)
The browser opens a window showing Open Save Cancel. If i click and save the excel sheet and then open, it opens. But clicking on Open directly doesnt open the excel sheet. Rather it gives the same error
The file name or path name does not exist.
The file you are trying to open is being used by another progrtam . close the document in other program and try again
The name of the work book your tring to save is the same as name of another document that is readonly .try saving workbook with different name
Can somebody please help me fix this problem, since its an urgent requirement. Mail me at [email protected]
Thanks
Hitesh

Save one file in different formats at once.

Hello,
I am a illustrator who needs to save files in different formats. Like 1 with a watermark, one small one for the website, another one for shop, a pdf file for the prints, etc. Is there a way to do all those things at once? Cause it really takes a lot of time.
I make my illustrations in photoshop, but if it's nessecary to only do those thing in another adobe programm, than that's no problem.
Please help, thank a lot!
Renske

Or try Image Processor Pro:
http://blogs.adobe.com/jnack/2011/05/new-image-processor-pro-script-for-cs5.html

I just received an OEM copy of Adobe Photoshop Lightroom 5 with my Canon Pixma Pro 100 Printer. What exactly is OEM. Is it a full version? Can I transfer files between different computers?

@

OEM means "Original Equipment Manufacturer", or in your case, Canon (not Adobe) is providing the software. It is identical to what you can buy from Adobe. It is the full version (that's the only version of Lightroom that exists)
Transfer files between different computers ... this is not a function of Lightroom. Lightroom neither helps nor prevents you from transferring files from one computer to another.

How to save open files in different projects/workspaces?

Is it possible at all to have Dreamweaver save different sets of open files in different projects/workspaces like every other IDE out there?
I can't imagine every web developer is working on ONE project at a time and doesn't feel the need to switch to another one and have his last open files restored from that specific project..
Am I missing something?

Very wrong
I am talking about saving different sessions of open files automatically (and assign them to user-defined projects that may or may not contain several sites or just one site).

How to generate a second csv file with different report columns selected?

Hi. Everybody:
How to generate a second csv file with different report columns selected?
The first csv file is easy (report attributes -> report export -> enable CSV output Yes). However, our users demand 2 csv files with different report columns selected to meet their different needs.
(The users don't want to have one csv file with all report columns included. They just want to get whatever they need directly, no extra columns)
Thank you for any help!
MZ

Hello,
I'm doing it usually. Typically example would be in the report only the column "FIRST_NAME" and "LAST_NAME" displayed whereas
in the csv exported with the UTL_FILE the complete address (street, housenumber, additions, zip, town, state ... ) is written, these things are needed e.g. the form letters.
You do not need another page, just an additional button named e.g. "export_to_csv" on your report page.
The csv export itself is handled from a plsql procedure "stored procedure" ( I like to have business logic outside of apex) which is invoked by pressing the button "export_to_csv". Of course the stored procedure can handle also parameters
An example code would be something like
PROCEDURE srn_brief_mitglieder (
     p_start_mg_nr IN NUMBER,
     p_ende_mg_nr IN NUMBER
AS
export_file          UTL_FILE.FILE_TYPE;
l_line               VARCHAR2(20000);
l_lfd               NUMBER;
l_dateiname          VARCHAR2(100);
l_datum               VARCHAR2(20);
l_hilfe               VARCHAR2(20);
CURSOR c1 IS
SELECT
MG_NR
,TO_CHAR(MG_BEITRITT,'dd.mm.yyyy') AS MG_BEITRITT ,TO_CHAR(MG_AUFNAHME,'dd.mm.yyyy') AS MG_AUFNAHME
,MG_ANREDE ,MG_TITEL ,MG_NACHNAME ,MG_VORNAME
,MG_STRASSE ,MG_HNR ,MG_ZUSATZ ,MG_PLZ ,MG_ORT
FROM MITGLIEDER
WHERE MG_NR >= p_start_mg_nr
AND MG_NR <= p_ende_mg_nr
--WHERE ROWNUM < 10
ORDER BY MG_NR;
BEGIN
SELECT TO_CHAR(SYSDATE, 'yyyy_mm_dd' ) INTO l_datum FROM DUAL;
SELECT TO_CHAR(SYSDATE, 'hh24miss' ) INTO l_hilfe FROM DUAL;
l_datum := l_datum||'_'||l_hilfe;
--DBMS_OUTPUT.PUT_LINE ( l_datum);
l_dateiname := 'SRNBRIEF_MITGLIEDER_'||l_datum||'.CSV';
--DBMS_OUTPUT.PUT_LINE ( l_dateiname);
export_file := UTL_FILE.FOPEN('EXPORTDIR', l_dateiname, 'W');
l_line := '';
--HEADER
l_line := '"NR"|"BEITRITT"|"AUFNAHME"|"ANREDE"|"TITEL"|"NACHNAME"|"VORNAME"';
l_line := l_line||'|"STRASSE"|"HNR"|"ZUSATZ"|"PLZ"|"ORT"';
     UTL_FILE.PUT_LINE(export_file, l_line);
FOR rec IN c1
LOOP
     l_line := '"'||rec.MG_NR||'"';
     l_line := l_line||'|"'||rec.MG_BEITRITT||'"|"' ||rec.MG_AUFNAHME||'"';
     l_line := l_line||'|"'||rec.MG_ANREDE||'"|"'||rec.MG_TITEL||'"|"'||rec.MG_NACHNAME||'"|"'||rec.MG_VORNAME||'"';
     l_line := l_line||'|"'||rec.MG_STRASSE||'"|"'||rec.MG_HNR||'"|"'||rec.MG_ZUSATZ||'"|"'||rec.MG_PLZ||'"|"'||rec.MG_ORT||'"';
--     DBMS_OUTPUT.PUT_LINE (l_line);
-- in datei schreiben
     UTL_FILE.PUT_LINE(export_file, l_line);
END LOOP;
UTL_FILE.FCLOSE(export_file);
END srn_brief_mitglieder;Edited by: wucis on Nov 6, 2011 9:09 AM

How to access Excel files from different locations?

Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok Gupta

The custom function sets the MS-Excel default directory to System.getProperty("user.dir")+"/excel"
(the domain directory), then opens the filename passed as a parameter. I assume
that if you pass in the fully specified path for the excel file ( like d:\MyDir\data\test.xls),
that it would open that file.
- Mike
"Ashok Gupta" <[email protected]> wrote:
>
Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run
it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files
from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok Gupta

Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the same version and product ID.

I am facing this problem while start debugging the Provider-Hosted app through VS2013. I want to deploy the app with same version. So please let me know any solution
to remove the app instance from office365 online, so that I can deploy the same app with same version on the specified "Developer Site".
Note: If I change the version in AppManifesst.xml file then this problem/error gets resolved. But I want to deploy with the same version as
per my business requirement.
The actual error renders while I click to "Start" button of the Visual Studio 2013 to deploy the provider-hosted app, for the sake
to deploying it on say "ABC" site collection (i.e. developer site). I work on office365 online. Therefore, request you to please provide the solution for SharePoint online office 365. The occurrences is:
"Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the
same version and product ID."
Please assist me anyone. It will be so kind of you.....
Naveen Kumar
Steria India Ltd.

Did you updated the AppManifest.xml file
and change the version.
If this helped you resolve your issue, please mark it Answered

Writing the files in different server

Hello
I am using oracle8i. I am converting the data into XML files. My company wants to
keep the converted XML files in different server. I am planning to use UTL file to
create the files. So UTL FILE would not write in another server. What is the
best way to solve this issue ?.
My option is
1. Create the XML files in Oracle server(using UTL FILE).
2. Write the batch script to move the files to another server.(can you give me a sample script for writing the batch file ?)
Is there any other alternate way to solve this problem ?.
I would appreicate if you could give me any other simplest way.
Thanks
Govind

Can i specify the remote file path in UTL_FILE_DIR(parameter files)... Please clarify .
Govind

How to configure a scenario which posts same file to different directories

How to configure a scenario which posts same file to different directories of a receiving system?
Consider an Idoc to file scenario where I have to post same file to two different directories but logical receiver system has to be same.

Hi,
You can try out like this: Using multiple receiver interfaces you can send it to multiple directories with the help of enhanced interface determination/conditions and with the help of multiple receiver communication channels.
Another option is to copy the file from one target directory into another directory with the help of Unix script by executing the same from the OS command level.
One more option is to create a Java Server Proxy and inside the proxy, you can write java code to FTP into different locations.
Hope this helps,
Regards,
Moorthy

Java.util.logging - different log files for different loggers

I'm having trouble configuring Java logging to use different log files for different loggers.
In log4j, I would do this by configuring multiple loggers each with a different appender. But how can I do this with Java (java.util.logging) logging?
This is the basic idea of what I'd like to do:
com.mycompany.app1.level = FINEST
com.mycompany.app1.<log file> = logfile1.log
com.mycompany.app2.level = ALL
com.mycompany.app2.<log file> = logfile2.log
Any suggestions?

This kind of thing?
import java.io.IOException;
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import java.util.logging.SimpleFormatter;
public class LogTest {
    private Logger app1;
    private Logger app2;
    public LogTest() {
        // setup loggers
        try {
            // first logger
            app1 = Logger.getLogger("com.mycompany.app1");
            FileHandler filehandler = new FileHandler( "logfile1.log" );
            filehandler.setFormatter(new SimpleFormatter());
            app1.addHandler(filehandler);
            // second logger
            app2 = Logger.getLogger("com.mycompany.app2");
            filehandler = new FileHandler( "logfile2.log" );
            filehandler.setFormatter(new SimpleFormatter());
            app2.addHandler(filehandler);
        } catch(IOException ioex) {
            ioex.printStackTrace();
    private void logStuff() {
        app1.log(Level.SEVERE, "a message for log 1");
        app2.log(Level.SEVERE, "a message for log 2");
        app2.log(Level.WARNING, "another message for log 2");
     * @param args
    public static void main(String[] args) {
        new LogTest().logStuff();
}

Repository file acts differently in another enviroment

Similar Messages

Maybe you are looking for