Repository Installation problem

Hi,
I am trying to install Oracle Designer 10G repository on Oracle 10G Release 2 database, my installation process is terminating because the connection to the database is lost in between, I tried to run the statement which is responsible for termination: grant INSERT, UPDATE, DELETE, SELECT on RM_ELEMENTS to ckr_REPOS_MANAGER outside of the installation process, even in this process also the connection is getting terminated, can some one please help me with this error so that I can install my repository.
Regards,
Praveen

HI ,
You write:
"my installation process is terminating because the connection to the database is lost in between"
and afterwards:
"I tried to run the statement which is responsible for termination"
According to the first , the cause is not the second.....
I mean if the cause of your problem were the second .. then the error message would be something like:
"no necessary privileges"...
Greetings...
Sim

Similar Messages

OWB 10gr2 repository installation problem

Hi,
When I try to install repositoy in owb10g r2
repository assistant -> advance setup... all those steps cleared
last installation progress popup window is came
at arnd 88% of installation(MESSG:installing warehouse builder repository owner )suddenly everything is disappearring..
Could any one help me out in this..
Thanks in advance.

I had faced this problem once. The database I was installing into, had been manually created. It did not have many of the components required for the installation.
I had to throw away the database and create a new one using DBCA. But in my case, the databases were new. These components can be installed separately, but a bit of searching is required to find what all components are required.
Regards,
Anurag

Designer6i Rel4 Repository installation problem

Hi All,
I downloaded the Designer6i Rel4 from OTN and install it for a trial.
I did everything as instructed in the installation guide but I run into problem when installing a repository. Only one log 'ckprereq.log' is there and it says,
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
IMP-00000: Import terminated unsuccessfully
Anybody can help me?
Thank you very much!
null

I think you neeed to check up your Registry entries too.Connect as the Admiistrator of the Machine & also see the Parameters settings from your Check Requirements from RAU......
As per the Documentation it needs a 2nd Home. What client(oracle)are you using ?????
Cheers .....
null

Business Process Repository - installation problem

Hi,
Please help me with installation of Oracle BPA Suite.
2 days ago I downloaded Oracle BPA Suite from "edelivery.oracle.com" - B46789-01, Oracle Business Process Analysis Suite 10g (10.1.3.4)
Installation set comes in 3 parts and is unpacked into 2 directories -
CD1-10.1.3.271679
and CD2-10.1.3.271679
I started CD1-10.1.3.271679/OracleBPA.exe
(screenshot - http://img525.imageshack.us/img525/6610/scr1wy9.jpg)
Oracle Business Process Architect installed fine.
Now I would like to install Business Process Repository following to instructions in chapter 3.4.1.1 (steps 2,3,4,...) of installation manual (CD1-10.1.3.271679\Docs\ENU\installation_guide_s.pdf), but I could not find button "Install Oracle Business Process Repository" which is mentioned in step 3 - see screenshot (http://img525.imageshack.us/img525/6610/scr1wy9.jpg).
Then I started file CD2-10.1.3.271679/bin/demo32.exe
(screenshot - http://img391.imageshack.us/img391/7439/scr2vp2.jpg)
It seems that the button "Install Oracle Business Process Repository" now is in place but it doesn't respond to click. I could press the button, but installation of repository does not start.
(button "Install Business Process Publisher" works fine)
What I'm doing wrong?
Ingars

Hi,
Trying running the installer at:
CD2-10.1.3.271679\OracleBPA.exeI don't have installer at this place. The only files/directories I have in CD2-10.1.3.271679 are
Bin
Business Process Publisher
Business Process Repository
Ingars

INS0003 OWB Repository Installation cannot continue without DBA privileges

Hi:
I´ve installed oracle database 10120 and today installed oracle warehouse builder 10.1, the installation haven´t problems, but when i try to execute OWB Repository Assistant i have the follow message error:
INS0003 OWB Repository Installation cannot continue without DBA privileges
If i connect me to OEM and check the privileges for sys or system user don't have any problem if i connect me as sysdba.
I created a new user with all privileges and the error is the same.
How could i fix my problem?
Thanks for your help.
Alex.

This issue is normally caused because you have not setup sys to connect as sysdba per newer database setup procedures, test with connect "/ as sysdba" in sql*plus.
If you cannot connect from SQLPlus by just the '/ as sysdba' login, then check the Note 50507.1 via Metalink as this describes the different ways you can connect to Oracle as an
administrative user.
Hope this helps,
Keith
Product Management
Oracle Warehouse Builder

BAM Installation Problem

. During installation of the Oracle BAM, the installation of the BAM ADC (Active Data Cache) failed with the following message "...You should install BAM ADC manually after this installation...". There is no instructions for the manual installation of the BAM ADC in the manual. How should I do this?
Can somebody help? Thanks - beeri Shani.

Hi
It seems that I'm more dumber than all the other BAM installers because only me have these installation problems.
Anyway, I still don't understand, which connection to what URDB_NAME database should exist . In the Installation manual only repository database mentioned, BAM and BAM EL and BAM EL Samples schemas should be built there (and they was indeed)
Before installation repository database (orabam) was fully accessible, tablespace and schemas were built as required in the manual, tnspings was ok, sqlplus access was ok.
During the installation, while the installation window displays "Status: Creating ADC system objects. This will take a few minutes", the following message was displayed - "
Unable to check for existing ADC.
If you have an existing ADC, it must be upgraded manually after the install. If this is a new install, you must manually create a new ADC after the install.
Connection must be open for this operation
Questions:
1. What connection must be open?
2. Where can I get the instruction for manual creation of the ADC?
Thanks.
Leonid.

P4's /Oracle 9i/Designer 6i Repository Creation Problems

Hi,
I am currently running Windows 2000 Professional on a new P4. I was unable to install Oracle 8.1.6 so have installed Oracle 9i and Designer 6i.
I have not been able to get a Repository built with this combination of hardware/software.
Can anyone tell me if Designer 6i will run against Oracle 9i?
If not when will Designer 9i be available for download?
Regards

I4m having a very similar problem with the same installation, but on a P2. Repository installation displays several errors (unable to grant, create indexes, etc on certain tables) and when I run designer logging with the user for which I created the repository it tells me that it is not a valid repository user.
Any insight??
tnx

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Repository Installation problem

Similar Messages

Maybe you are looking for