Repository is invalid after crash of the MDM Server in MDM 7.1

Hello,
after a crash of our MDS the slave repository is invalid. When I tried to connect to the repository I am getting an error like
Repository connect failed
Error: The MDM repository is Invalid
I tired to delete but I am not able to delete also. While deleteing it is giving an error like
The MDM repository is in read-only mode
The master repository on the same db server and MDS server works fine. I'm also unable to unmount the repository and note 1325833 was not helpful.
Any Help or Solution?
Thanks

Hello Patrick G.
Sometimes we had some situation.
Create your master repository archive .
Connect to database directly and drop you slave repository tablespace.
Than create slave repository again.
in Database you repositories have names like [repository_name] M000 or [repositoryname] _Z000
Regards
Kanstantsin Chernichenka

Similar Messages

Repositories are invalid after restarting the MDM Server in MDM 7.1

Hi SDNers,
After I restarted the MDS server I am not able to logon to the repository. When I tried to connect to repository I am getting an error like "Repository Connect Failed and The MDM Repository is Invalid"
I tired to delete but I am not able to delete also. While deleteing it is giving an error like "MDM Repository is in Read Only Mode".
So I am not able to Delete the repository also to create a new Repository.
Any Help or Solution
Thanks
Kiran
Edited by: Kiran on Apr 6, 2011 6:40 AM

Kiran -
some of the below ways you can check
1. Check your mds.ini settings. and do unmount nad then mount the MDM server again. Try to Monitor the Authentication for Particular repositry which you want to connect to your MDM 7.1 server
2. after checking the note 1325833. try restart database server first then MDM server.
3. also try to check with Appropriate repository option once.
HTH
thx
Deep

All the SSIS Packages are not editable to the all users after deploying to the other server

Hi All,
I am using sqlserver2012.
How to make all the SSIS Packages are not editable to all users after deploying to the other server. is there any way to achieve this,
if yes, could share the information how to do....
Thanks in advance....
RamarajuC

Typically, you change the protection level as listed in the following steps:
During development, leave the protection level of packages set to the default value,
EncryptSensitiveWithUserKey. This setting helps ensure that only the developer sees sensitive values in the package. Or, you can consider using
EncryptAllWithUserKey, or DontSaveSensitive.
When it is time to deploy the packages, you have to change the protection level to one that does not depend on the developer's user key. Therefore you typically have to select
EncryptSensitiveWithPassword, or EncryptAllWithPassword. Encrypt the packages by assigning a temporary strong password that is also known to the operations team in the production environment.
After the packages have been deployed to the production environment, the operations team can re-encrypt the deployed packages by assigning a strong password that is known only to them. Or, they can encrypt the deployed packages by selecting
EncryptSensitiveWithUserKey or EncryptAllWithUserKey, and using the local credentials of the account that will run the packages.
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Oracle cache is still there after I restart the Oracle server - can it be?

Hello,
My name is Tal and I work for a software company called Mercury.
We have a strange case in Oracle 9.2.0.6 (running on Solaris 2.9) and I wonder if one of you can help.
I am running query, this query is doing something like âselect * from x where y between z and wâ.
x, y, z and w are parameters which cause the query to be one that scans a lot of data.
I run the query twice and the first time takes 60 seconds, but the second time takes only 3 seconds.
I assumed that this is caused by the database cache (block buffers).
BUT,
Then I bounced the database (shutdown immediate + startup) and rerun the query.
It comes back after 3 seconds again!!!
Can some share some info on this; it looks like Oracle cache is still there after I restart the Oracle server.
Tal Olier ([email protected]).

Regarding the buffer cache, it is definitly flushed after database restart.
There can be many factors causing your case:
1. The first time you ran the query, some other process was consuming the server resources.
2. Some other users were running heavy queries.
3. Sudden Heavy network activities.
Q: Did the query, in any time, run in 60 seconds again?
If yes, then further factors should be considered.

When mount MDM server on MDM console...MDM Console hangs.

Hi,
when i try to mount MDM server on MDM console, MDM Console hangs and then i have to stop MDM console with task manager.
For this i have tried with restarting MDM server - then also issue was not resolved, then i have rebooted the server, then issue resolved.
But rebooting the server is not permanent solution, this problem occurs everything next 3-4 days.
Please let me know the cause and it's solution if anyone has faced the similar issue.
---------------Server details----------------
SAP MDM 7.1SPS11
OS - Suse Linux
DB - MaxDB
MDM Console is also SPS11
Thanks and Regards,
Murtaza Najmi

Hi Murtaza,
This may be due to the memory full issue. It is advisable to allocate appropriate memory in the RAM where server is running. Generally it will be done by the DB team or Linux/unix team. Raise this ticket to your concerned teams.
Thanks,
Vinoth

How To Redirect to a site after logging into the R3 server?

I want to be able to do something like the following:
www.sapr3servername.doimain.com?redirect=www.xyz.com
So the users will be prompted to log into the SAPr3 server, than after the server has authenticated the user, i want the login page to redirect to a URL of my choosing.
How can I do this? What is the keyword for the parameter in the R3 server ?
Flow
- users will hit www.xyz.com
- If user is not authenticated, xyz.com will direct them to the URL in an iframe: www.sapr3servername.doimain.com?redirect=www.xyz.com
- The user will sign into www.sapr3servername.domain.com with their SAP crednetials
- after the sign on is completed, the R3 server will redirect them back to xyz.com, where they will now be authenticated

BUMP
Is this not possible or what?

Error in starting MDM Server from MDM Console

Hi,
I have installed SAP MDM 5.5 SP05 on Windows 2003 Server.
When i try to start the MDM Server (i.e. MDM Service) from the MDM console it gives me the following error:
<i>Error Starting apmdmd(MDM Server): The machine 'apmdmd' is not Windows-based. The MDM server cannot be started from this application; please use CLIX on the machine instead. </i>
But if i start the MDM Service manually and then mount the server, it works fine.
Kindly help.
Regards,
Chintan Sheth

It sounds to me like a problem potentially with either the permissions of the Windows user or perhaps a software firewall. The Console uses a low-level Windows API function to determine if the target machine on which MDS is installed is Windows-based. This function may be blocked by some OS or firewall-level setting. This may be the case even if you are able to use the same client machine to connect to the target machine via the Service Control Manager and start MDS from there.
I would like to help with this problem, but I need to know a few more things:
When the problem occurs, is the Console running on the same Windows machine as MDS?
You mentioned Windows 2003 Server... when you run the Console on this machine, are you logged in as an Administrator of the machine? And do you still get the error when you attempt to start MDS from within the Console?
Once MDS is started, and you mount it within the Console, are you having any other problems, such as logging in to a repository, or viewing logs?
Is there a firewall installed on the machine or machines that the software is installed on? We may have to review the settings of the firewall, or try temporarily disabling it (on both ends, or at least on the machine running MDS), to see if the problem goes away -- then we'll know the problem is with the firewall settings.
CLIX is a fine workaround if you can use it, but clearly this problem needs to be rectified.
-cleo

Unable to Start MDM Server through MDM Console

Dear All,
We have issue to start MDM through MDM Console , MDM instance is up and running SAP console.
I have already mounted MDM Server but its show MDM is not started , we are try to start manualy while right clicking.
It shows below error .
error starting 'sap1024.sap.xxx.com (MDM Server)'
Call to SAPWebServiceStartInstance failed with error .A connection attempt failed because the connected party did not properly respond after a period of time , or established connecton failed bacause connected host has failed to respond.
Kindly suggest to resolve the above issue in MDM.
thanks

Closing the thread , same thread post in MDM .

Network bandwidth requirement between MDM server and MDM Clients

The MDM Sizing document for 5.5 states that 'a network connection between MDM Servers and MDM clients should be at least 100 Mbps'. Is this true? This would preclude MDM being offered as a hosted service. I'm interested in MDM Catalogue for SRM, so the catalogue content managers would need the import and data manager clients.

One factor I noticed, in our project...
I would recommend a 4 GB RAM for someone who is working with Import Manager.
As far as the Network connection goes, I am not sure what the requirements are.
We have faced several issues when the end user's laptop are less than 2 GB.
If someone is working with Image Manager, then I would recommend 4GB.
For bulk imports, I would use Import Server.

JVM is invalid after logoff from the windows

Hello,
I have one problem using JNI inside C++. I create JVM inside C++ and launch the application as service, then I log out from windows and leave the process running. I found that the JVM is not valid after I log out although the process is still running. It gives 0xC0000005 access violation exception when any method on JVM is invoked. I tried to call AttachCurrentThread on the JVM, but it fails as well. It seems that the JNIEnv* is also corrupted.
Did anyone encounter the same problem?
Thanks.

Try reading the C source code of the following products that can launch Java applications as services and check what you've done wrong. It's good to learn from people that have had the same problems as you.
- Jakarta Apache Commons Daemon ( http://jakarta.apache.org/commons/daemon/ ) - it is used by Tomcat when running as a service.
- JavaService from Alexandria Software Consulting - recommended by JBoss if you want to run JBoss as a service.

After Crash - All the Standard Radio Stations are gone

Hard Disk crashed, got my music back but tonight looking for a radio station I see all the choices are gone from my iTunes Radio folder. Is there a way to reset those?

do you have a previous backup from that morning or the day before? If so try using those backup files and see if it makes any difference.

JVM crash stopping the Tomcat server

Hello. I am currently having issues on a Linux RHEL AS 2.1 kernel 2.4.9 server, running Tomcat 5.0.28 and j2sdk1.4.2_06. We keep experiencing JVM crashes, and are not sure what the cause is. Not even sure where to begin to look for the cause. The only clue I can find is Hot Spot Virtual Machine error:11. Error 11 could be multiple things. Can anyone suggest where to start on this issue. Java is definately not my area of expertise so feel free to talk to me as if I was two. All OS hardware seems to be good. There are no indications of bad memory or any other hardware issues.

Inadvertent duplicate post, reply to the other one.

DNS Host record of a computer is deleted after you change the DNS server assignment

Hi All,
This is a critical bug in Windows 7/Windows 2008 and Windows 2008 R2. Is there any way to get rid of it? I am planning for for a deployment with new DNS server IPs.
Thank you.

Hello,
please see http://support.microsoft.com/kb/2520155/en-us
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

MDM Server Window Service failed after adding server password

After adding MDM server password, MDM server window service can't start up. We have to use clix command to start the server. Is there anyway to fix window service problem?

Hi Jean,
From the version number it sounds like you're using version 5.5 SP4, right? The Console application was significantly changed in SP5 and you would no longer see the locked server icon... If you unmount the server from the Console, and re-mount it, isn't there an option on the context menu for the tree (right-click on the server node) to provide the password? Did you try "Connect to Server" or "Start Server" on this context menu?
Thanks... I don't know if I can help you with your problem, but I will try!
-Cleopatra
Message was edited by: Author - found the option on the context menu to provide the password to the server
Cleopatra Von Ludwig
Message was edited by:
Cleopatra Von Ludwig

MDM Console Connectivity to MDM Server

Hi,
My scenario is that I have install MDM Server on one machine with Oracle as Database. Now when I try to connect to connect to that MDM Server using MDM Console from other machine it is not connecting.
The machine on which Console is installed is already having Oracle Server installed for another aplication. I did create a Net Alias and I can connect to Oracle Database on MDM Server using SQL plus of the server on which cnsole is installed.
Someone say that I need to install oracle client on MDM Server side....is it so ?
Regards
Vijay

Hi Vijay,
Assuming your MDM Server is on a Windows system:
Does a MDM Console on the very same machine connect to the MDM Server?
Kind regards,
Dennis

Repository is invalid after crash of the MDM Server in MDM 7.1

Similar Messages

Maybe you are looking for