Repository logon failed

Hi,
I am using obiee 10.1.3.4.
I have created a new user called olaptrain and given read privilege for a table. I have created this user by the Administrator. When i am trying to logon with olaptrain user, its giving logon failed message. Please let me know the solution.
regards
chandra kanth.

Hi,
I have done as you said. I have allocated olaptrain user to Administrators and OLAPUSER groups in repository. In the presentation services
i have granted privileges to olaptrain user only and denied for everyone (for the SALESTRACK SubjectArea).
presentation services --> Administration ---> manage privileges ----> SubjectArea: SALESTRACK.
I still could able to see all subject areas when i logon with olaptrain user. What is the problem?
If i remove administrators group from olaptrain user in Respostory then i could see only SALESTRACK subject area for the olaptrain user.
It is redundant that in repository for a user administrators group is required to open/modify repository content. When control comes to webcat there
i denied access to everyone for SALESTRACK subjectarea and given access to only olaptrain user. Still olaptrain user could see all the subject areas.
Please let me know the solution..
regards
CK

Similar Messages

  • Data Services 4.0  logon failed

    Hi everybody
    after a very difficult  but succesfull installation of DS 4.0 server con AIX, I'm trying to connect to a Repository already created, from a DESIGNER 4.0 installed over a Windows PC, and got the following error message:
    LOGON FAILED TO THE SPECIFIED SYSTEM
    Check system name, port number, user name, password, authentication method, and try again.
    Additional information:  <Session:  SDK failure>
    For the DS 4.0 installation,  I used  a CMS of sap IPS , for which I can connect perfectly, so I believe the System Name is not the problem.
    thanks for your help!

    Hi Ricardo, Vineeth,
    Another think you can check is that the network can resolve your CMC Server name (the one you are using in the login window.)
    I do not remember the details now, but if you use a sniffer (like wireshark ) you will see that:
    - The client will connect with the CMC server
    - the server will answer with a packet with its server name (not IP)
    - the client will try to connect with the CMC server with that name.
    Make sure you have those hosts and name in the /etc/hosts file
    For example what happened to me is that my test Red Hat systems were not registered in my DNS server. I assumed it was just about network-connectivity and tried to login the Designer with the CMC IP Address.
    This does not work, the CMC  Server name has to be resolvable. Adding that into the hosts file solved it.
    Regards
    Norbert

  • Live Office: Database logon failed error

    Please help...Live Office problem...
    Am working in Xcelsius 2008.
    Here's what I'm trying to do:
    1. I set up a Crystal Report using a Stored Procedure as the data provider.
    2. The Stored Procedure has a parameter built into it.
    3. When the report is refreshed within Crystal, the prompt dialog box is displayed; I fill in the desired value, and run. Everything comes back fine.
    4. Crystal Report is exported to the repository.
    5. In Excel, I inserted the Crystal Report using Live Office. It shows up as a Live Office object just fine.
    6. I bound an Excel cell to the prompt; when you change the value in the bound cell, the Live Office object refreshes and displays the correct results.
    7. In Xcelsius, I imported the Excel spreadsheet.
    8. I set up a Text component that is bound to the cell containing the parameter value. Also set up a Grid to display the results, and a Connection Refresh button to call the refresh. Added a Live Office Data Connection pointing to the Web Service URL for the report. 
    Note: When in Designer mode, if the value of the bound cell is changed, the results in the grid change accordingly.
    9.  When in Preview mode (or generated swf), if the Refresh button is pressed, a "User Identification" dialog box appears asking me to log on. The values it asks for are: System, User Name, Password, and Authentication.  I enter the same credentials as are within the Live Office settings in Excel, (which are working correctly), but receive an error "soapenv:Server.generalException: Database logon failed.".
    Note - all the id's are synced up - Business Objects, Database, etc.
    I've tried all kinds of combinations, but nothing gets me past this error. If I use any other server than the system one, the error message is "soapenv:Server.generalException: Server XXXXX not found or server may be down".
    I've noticed that in Excel directly, when I open the spreadsheet and refresh the Live Office object, I am prompted to log on to the database where the stored procedure is being executed. This dialog box does not appear once the Excel sheet has been imported into Xcelsius. One of the combinations I tried in the "User Identification" dialog box was the name of the database server, that didn't work either.
    I also tried creating the Live Office object directly within the Excel spreadsheet in Xcelsius, but then I was unable to bind the prompt value. Could never get the Live Office/Properties menu to appear.
    Ideas? Thoughts?
    Thanks in advance!
    Stephanie

    Got it!
    Here's what I had to do...
    In the CMC, under Object/Process/Database for the Crystal Report -
    which says...
    "Set the default information for logging onto the data source(s) automatically whenever the report is run."
    The Database Connection option had to be set to "Use custom database logon information specified here" and
    the When Viewing Report option set to "Use same database logon as when report is run".
    Then everything works fine - prompts appear, and Xcelsius passes the log on information to the database correctly. Stored procedure executes and returns the correct results.
    Thanks to everyone for their help!
    Stephanie

  • SRM-MDM 3.0 SP10 Patch 1 - logon failed

    Hello there,
    we have a urgend problem after upgrading the SRM-MDM Components and the MDM Server.
    Problem is, that we are not able to logon to the app ui or the search ui. It's not a Problem with the user. When logon to the app ui we receive the message "logon failed".
    Connection to the Repository via MDM Clients works very well. Only the Web UI is not accessable.
    To be sure we are having the right SPs for the Components we downloaded the latest Support Stack that includes all components versions that fits to each other (thats what i think).
    At least we have now
    MDM Server SP06
    MDM Catalog SP10 Patch 1
    Java API SP10 Patch 0
    MDM Connector SP10 Patch 7 (?)
    Here's the information from the connection test via mdm utilities
    !======================================!
    Host-Adresse = 10.199.29.243
    Host Name = mpgmdms
    Repository-Port = 2000
    !======================================!
    MDM-Server-Ports werden geprüft...
    Verbindung ok (Port 59950, Zeit = 0 ms)
    Repository-Ports werden geprüft...
    Verbindung ok (Port 2000, Zeit = 0 ms)
    Verbindung ok (Port 2001, Zeit = 0 ms)
    Verbindung ok (Port 2002, Zeit = 0 ms)
    JAVA-API-Version von MDM ermitteln
    Admin Version = 7.1.07.101
    Build Version = 7.1.07.166
    Content Version = 7.1.07.101
    Meta Version      = 7.1.07.101
    !======================================!
    Verbindung zu MDM-Server 10.199.29.243 wird hergestellt
    MDM-Server-Version wird ermittelt...
    Version = Version 7.1 (7.1.06.234 Win64)
    !======================================!
    Installierte Repositories werden ermittelt...
    -> MPG_DEV_MASTER (S36/ORCL)
    -> MPG_DEV_SLAVE2 (S36/ORCL)
    -> MPG_DEV_SLAVE (S36/ORCL)
    -> MPG_TEST_REPOSITORY (S36/ORCL)
    From the visua administrator we get the following releaseinformation:
    MDM_Connector 1000.710.700.7.1.201105150802
    MDM_JAVA_API 1000.710.0.7.166.20110410110411
    SRM_MDM_CAT 1000.3.0.10.1.20110429065011
    Within the MDM Console we get a some log entries when trying to log in.
    Hope you can help me.
    Thank your
    Rico
    Edited by: Rico Stoll on May 25, 2011 6:31 PM

    ur API / connector and MDS are on diff SP levels :
    JAVA-API-Version von MDM ermitteln
    Admin Version = 7.1.07.101 Interface CRC=0x7d50b0cf
    Build Version = 7.1.07.166
    Content Version = 7.1.07.101 Interface CRC=???
    Meta Version \t= 7.1.07.101 Interface CRC=0x3a0a3732
    !======================================!
    Verbindung zu MDM-Server 10.199.29.243 wird hergestellt
    MDM-Server-Version wird ermittelt...
    Version = Version 7.1 (7.1.06.234 Win64)
    upgrade the MDS to SP 07 and things should start working !
    thanks
    -Adrivit

  • R3 - Repository Upgrade failed

    Hi,
    AIX5, EM10gR2 upgrade to R3.
    (Fresh installation of R2, applied patch 4329444, proceed with R3 upgrade)
    At the Configuration Assistants screen:
    "Repository Upgrade failed"
    $ cat configToolFailedCommands
    # Copyright (c) 1999, 2007, Oracle. All rights reserved.
    oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
    oracle.sysman.emcp.oms.OmsPatchUpgrade -configureOms
    oracle.sysman.emcp.aggregates.ConfigPlugIn
    oracle.sysman.emcp.oms.StartOMS -configureOms
    oracle.sysman.ccr.configCCR.ConfigCCRPlugIn
    Not sure what to do.
    Any hints how to proceed?
    Thx,
    Dobby

    Same problem but on RHEL4 when trying to upgrade to 10.2.0.3. Fresh install with database already 10.2.0.3 and OMS was installed with option "existing DB".
    Database and listener were left running but all other processes were shutdown with opmnctl stopall.
    Any ideas?
    This is the end of $OMS_HOME/sysman/log/emoms.trc:
    2007-10-04 10:23:14,204 [Job Dispatcher Thread] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
    2007-10-04 10:23:14,220 [Job Dispatcher Thread] ERROR em.jobs preTask.2292 - Cannot get id: Io exception: The Network Adapter could not establish the connection
    2007-10-04 10:23:18,248 [NotificationMgrThread] WARN jdbc.ConnectionCache _getConnection.352 - Io exception: The Network Adapter could not establish the connection
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
    at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:217)
    at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:108)
    at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:76)
    at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1344)
    at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:435)
    at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:330)
    at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:285)
    at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:253)
    at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:336)
    at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:322)
    at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:575)
    at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:207)
    at oracle.sysman.emSDK.svc.conn.ConnectionService.getSystemConnection(ConnectionService.java:1304)
    at oracle.sysman.emdrep.notification.NotificationMgr.getConnection(NotificationMgr.java:403)
    at oracle.sysman.emdrep.notification.NotificationMgr.run(NotificationMgr.java:1453)
    2007-10-04 10:23:18,251 [NotificationMgrThread] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • "Program terminated in remote system NONE: Logon failed" when adding a new table

    Hello,
    I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
    I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
    I have 100 tables to replicate.
    I succeeded to set up replication for 57 tables. These tables are replicating properly.
    Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
    When I press 'Show Error Log' button I got an obscure error message:
    "Program terminated in remote system NONE: Logon failed "
    I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
    Can you please tell how to troubleshoot this error.
    Thanks in advance,
    Christian

    First thank you for answering my questions. I really appreciate your answers.
    I rechecked the documentation.
    "Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
    Page 29 - 30
    3.5.2.2 Data Transfer Jobs
    This section explains the relationship between the number of data transfer jobs and the number of available background work process.
    Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
     One monitoring job (master job)
     One master controller job
     At least one data load job
     One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
    Example
    If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
    1 Master controller job: /1LT/IUC_REP_CNTR_001
     At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
    When configuring your data load or replication scenario, consider the following:
     Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
     The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
     Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
    Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
    Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
    Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
    With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
    The number of required work processes can be determined by adding
     The Number of required data transfer jobs ,
     plus one background work process for Central Master (Monitoring) Job (only one per system!),
     plus one background work process for Master Controller Job,
     plus 3-5 additional empty background work processes (recommended per configuration),
     plus approx. 3 dialog work processes (recommended for each configuration).
    Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
    To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
    Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
    - The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
    10 data transfer jobs ,
    + 1 background work process for Central Master (Monitoring) Job (only one per system!),
    + 1 background work process for Master Controller Job,
    + 5 additional empty background work processes (recommended per configuration),
    + 3 dialog work processes (recommended for each configuration).
    - The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
    Am I correct ?
    Regards,
    Christian

  • Getting Logon Failed error connecting to SAP R/3 with Crystal

    I have Crystal Reports 2008 and also the SAP Integration Kit installed on my desktop.  I've imported the transports into my DEV and QAS systems and am trying to connect directly to R/3 from Crystal using the SAP Table, Cluster or Function choice.
    I receive the error:
    Logon failed.  Details: You do not have the necessary rights to design reports against the SAP system.  Please check with your system administrator. 
    I'm using a logon that has full rights within SAP.  It recognizes my password because when I try a password that I know is wrong I get a different error message: Logon failed. Detail: Name or password is incorrect.  I receive the same error in PRD even though I have not imported the transports into that client.
    I have Crystal Server but am not trying to use that at the moment.  Just Crystal Reports as a standalone product.  If I've left something out please let me know.
    Thank you,
    Kevin Scheeler

    Hi Kevin,
    take a look at the Installation Guide for the SAP Integration Kit which includes a detailed list of authorizations per use case in the appendix
    the documentation is available on help.sap.com
    Ingo Hilgefort

  • Repository upgrade fails 11.1.0.7 db -10.2.0.5 GC patchset

    Installing GridControl 10.2.0.5 on Windows 2003 Server SP2. Initial install successful of 10.2.0.2 using existing database 11.1.0.7. The database was created new to use for GC. Patchset no problems until Configuration Assitant step "Repository Upgrade" failed with errors:
    rem Copyright (c) 1999, 2009, Oracle. All rights reserved.
    oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
    oracle.sysman.emcp.oms.OmsPatchUpgrade -configureOms
    oracle.sysman.emcp.aggregates.ConfigPlugIn
    oracle.sysman.emcp.oms.StartOMS -configureOms
    oracle.sysman.emcp.oms.EMCLISetup
    oracle.sysman.ccr.configCCR.ConfigCCRPlugIn
    oracle.sysman.ccr.configCCR.ConfigRepeaterPlugIn
    Tried to find cause of errors and cannot seem to understand why this step failed.
    Considering uninstalling GC and Oracle 11g and reinstalling GC with "new database" option.
    Anyone successful at installing GC 10.2.0.5 with an 11g database?
    Thank you,
    Curt Swartzlander
    DBA

    pasinc wrote:
    Can anyone help me figure out why the domU is just hanging/blocked?It's not hanging (blocked just means it doesn't need the CPU) -- it's just switched into a graphic mode that the console view can't display. You can either VNC into the guest, or change the kernel boot parameters by removing rhgb quiet and replacing them with console=xvc0 -- this should allow you to see the full boot process and answer the first-boot interview questions without using VNC.
    You can get the VNC details by running: virsh dumpxml <domain ID> and you can get the domain ID from the xm list output.

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    Logon failure: unknown user name or bad password 
    am using Windows integrated security,version of my sql server 2008R2
    I have go throgh the different articuls, they have given different answers,
    So any one give me the  exact soluction for this problem,
    Using service account then i will get the soluction or what?
    pls help me out it is urgent based.
    Regards
    Thanks!

    Hi Ychinnari,
    I have tested on my local environment and can reproduce the issue, as
    Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
    Please also find more details information about when to use the execution account, if possible,please also not specify this account:
    This account is used under special circumstances when other sources of credentials are not available:
    When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
    When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
    Execution Account (SSRS Native Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Database Logon Failed after first report

    I have a Windows Server 2003 x86 server running IIS6 and ASP.NET. On this server, I have two different web forms set up to export Crystal Reports to PDF.
    My problem is that only one of these reports can run. For example, I open report 1 and can then reopen (generate PDF of) report1 as many times as I want. I cannot open report 2 - I get a "Database Logon Failed" error message. If I restart the server, I can generate a PDF of report 2 successfully and as many times as I want but report 1 will get a "Database Logon Failed" error message.
    Has anyone seen this behavior before? My code is very concise and manually closes the report document (and forces the garbage collection to run) once the PDF has been generated. However, for some reason, the report is staying in memory and is trying to run again even though it has been closed. It is driving me crazy.
    Thanks in advance for any assistance you can offer.

    Let's get the server confusion out of the way.
    A "server" runtime install is an msi file called CrystalReports11_5_NET_2005.msi.
    The msi is in a download called Crystal Reports XI Release 2 - FP x.x .NET Server Install (where x.x refers to SP or FP version (e.g.; Crystal Reports XI Release 2 - FP 5.6 .NET Server Install)
    So, this gives you an easy way of installing the CR runtime on a server (e.g.. Win 2003 server). No CR server (RAS) implication here. To install the runtime, all you have to do is run the msi, provide the keycode when prompted and the runtime is installed. You should see the directory C:\Program Files\Business Objects\Common\3.5\bin created. No pretty interface, etc. If you want a pretty interface, you create your own setup project or msi using the CR msm files.
    Hopefully this clears up the "server" confusion.
    To the actual issue on hand.
    You say this works with older "Crystal Reports viewers" installed on a WIN 2003 64 bit server. My question is; does this CR XI r2 based app work anywhere? Your dev box? Staging server?
    Ludek

  • Crystal Report 10 and Visual Basic 6 - logon failed in crystal report viewe

    Guyz,.
    Report viewer is showing logon failed, pelase help me, i can able to view the data from rs1(recorset).
    please hellp me to fix this issue, i need to pass the sql query to my pre designed Crystal report which has all the field as same as SQL query.
    Please suggest me if any other alternate way to do this , my code is below.
    Environment : Crystal Report 10, Visual Basic 6
    cr_preview -> CrystalActiveXReportViewer
    RepName  -> Fiename and path of the Crystal report is designed from Crystal Report Designer.
    Function show_rep(Sql As String, RepName As String)
    Dim crystal As CRAXDRT.Application
    Dim report As New CRAXDRT.report
    Dim rs1 As New ADODB.Recordset
        If rs1.State Then rs1.Close
        rs1.Open Sql, cn, adOpenStatic, adLockReadOnly
        Set crystal = New CRAXDRT.Application
        Set report = crystal.OpenReport(RepName)
        report.DiscardSavedData
        report.Database.SetDataSource rs1
        'cr_preview.Refresh
        cr_preview.ReportSource = report
        cr_preview.Visible = True
        cr_preview.ViewReport
        Do While cr_preview.IsBusy
            DoEvents
        Loop
        cr_preview.Zoom 100
        If rs1.State Then rs1.Close
        Set rs1 = Nothing
    Set crystal = Nothing
    Set report = Nothing
    End Function

    Hi,
    Please refer to the link for the list of example, [click here|http://pscode.com/vb/scripts/BrowseCategoryOrSearchResults.asp?optSort=Alphabetical&lngWId=1&B1=QuickSearch&txtCriteria=crystalreport+10&blnWorldDropDownUsed=TRUE&txtMaxNumberOfEntriesPerPage=10&blnResetAllVariables=TRUE]
    Regards,
    Clint

  • Crystal report logon Failed Error

    Dear All
    We have installed BOBJ Edge 3.1 Server at Windows Server.
    We insalled Crystal Report 2008 at one of our Laptop.  (Client).
    When we tried to create a sample report,
    we selected a existing universe from the BOBJ Server.  When we selected it ask me for the server connection details. It connected and showed me the existing unverses.
    I selected say eFashion - and picked some fields and Click OK.
    Then it givs logon failed error.
    Can some one explian me where i am missing
    REgards,
    Venkat

    Hi Venkat,
    If the Universe is based off an ODBC connection, then the same ODBC connection (with the same name) needs to be present on the client machine too.
    So, like Don suggested, the client machine would need the same DB client too.
    Open the Universe in the Universe Designer. Go to File > Parameters > Edit. This is where you see all the connection information of the Universe.
    -Abhilash

  • Logon Failed when exporting crystal report to PDF

    Hi, I am Teguh
    i want to ask about error when export crystal report to pdf
    error message
    CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed
    [LogOnException: Logon failed.]
       .I(String , EngineExceptionErrorID ) +506
       .D(Int16 , Int32 ) +537
       .C(Int16 ) +10
       CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) +577
       CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType) +141
       Falcon.CRTransferSlip.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\Falcon\CRTransferSlip.aspx.vb:77
       System.Web.UI.Control.OnLoad(EventArgs e) +67
       System.Web.UI.Control.LoadRecursive() +35
       System.Web.UI.Page.ProcessRequestMain() +750
    environment:
    OS : Windows server 2008 standard SP1
    IIS: Version 7.0
    SQL: Sql server 2000
    VS : Visual studio 2003
    i really confused with this error,
    please help me for this problem
    many thank's

    Hi Ludek
    Thank you for your response. I have installed SP3 and ProcMon and still the same result.
    I applied a filter on ProcMon to filter out items where the path contains 'export'.
    There are a few items where the result is 'NAME NOT FOUND' but I don't think it necessarly had anything to do with the barcode. These include items such as 'EXPORT\MailDestType','EXPORT\DisableExportLiveOfficeSupport'','EXPORT\ExportDirectory' to name a few.
    What drew my attention was the ACCESS DENIED result on specifically the EXPORT\PDF folders. The detail for these are  Desired Access : All access, however the very same entry appears a little futher on as a SUCCESS but this is detailed as Desired Access: Query Value.
    So in summary it looks something like this:
    User : Server\XXX
    Operation : RegOpenKey
    Path : HKU\.DEFAULT\Software\Business Objects\Suite 12.0\Crystal Reports\Export\Pdf
    Result : ACCESS DENIED
    Desired Access : All Access
    User : Server\XXX
    Operation : RegOpenKey
    Path : HKU\.DEFAULT\Software\Business Objects\Suite 12.0\Crystal Reports\Export\Pdf
    Result : SUCCESS
    Desired Access : Query Value
    There are a few other entries that follow this pattern that exists in other locations such as HKLM\Software...
    Could this 'ACCESS DENIED' be the problem? and If so how do I, and should I give user XXX this ALL Access its looking for.
    Regards
    Elroy

  • Logon failed. Details: mscorlib (Crystal report error during print &export)

    Hi,
    I'm encountering the problem that the crystal report is working fine in the staging server I developed.
    However, after I transported to live server the report having problems when printing and exporting.
    Below is the error message prompts to me.
    Logon failed. Details: mscorlib : Could not find file 'C:\Inetpub\wwwroot\rptPrintSummaryConfineSpace.xml'. Error in File C:\WINDOWS\TEMP\rptPrintSummaryConfineSpace {2D72226E-816A-4D9B-BF93-C9077001F09C}.rpt: Unable to connect: incorrect log on parameters.
    I hit this error when I click OK button on export or print option page.
    My temp folder at windows is given full permission for IIS_WPG and ASPUSER.
    Please help to resolve my problem thank you very much.

    What version of Crystal Reports?
    What CR Service Pack are you on?
    What is the database?
    How are you connecting to the databse (ODBC, OLE DB, etc.)?
    - Ludek

  • Logon failed, with some Chinese description

    Dears,
    We are running the SAP Crystal Reports 2011 client (on a Windows PC) to
    built reports on DB tables residing on ERP ECC 6.0 EhP5 system,
    installed on IBM Power System i V7R1.
    Going through the necessary steps after starting the Crystal Reports
    client :
    Report Wizard -> Create New Connection -> SAP Table, Cluster, or
    Function, I get a list of all the SAP systems, which are configured in
    the conventional SAP GUI installed on the Windows PC (730, patch level 1).
    After choosing the ERP PRO system for example, I receive a dialog
    through which I enter the client no., user & password. 
    When I click the 'Finish' button, I get a dialog depicting two lines :
    The first line = 'Logon failed.'
    The second line = 'Details:...' then a sequence of some Chinese (I
    asssume) characters !
    Kindly advise on how to solve this problem.
    (Note : please find below a screen shot depicting the last dialog encountered.)
    Thank you in advance for your cooperation.
    Regards.
    Reda

    Dears,
    The following is the solution for the above mentioned problem :
    Right Click on the entry of interest among the list of entries in SAP GUI, select 'Properties', click the 'Code Page' tab, select the 'Default' option in the drop down list labeled : 'Language'
    ( The previous option chosen in the drop down list was 'English')
    Thanks.
    Reda

Maybe you are looking for