Repository not opening in DataManager though it is loaded properly

Hi All,
I am working on MDM sp03
I have one repository which is loaded properly.
when i tried to arichived it, I got two fatal errors which are as follow..
Fatal error(1344): The fieldId (351) in constraint Id(9) is not valid.
Fatal error(1344): The fieldId (353) in constraint Id(4) is not valid.
When i repaired the repository, the fatal error had gone.
But now when i try to run the data manager its starting only...and it is not giving any errors also
If anybody can help me with how to open the DataManager
Thanks and Regards,
Shruti.

Hi Shruti,
Were you able to open the repository through Data Manager before this error?
Just check if the Data Manager version is compatible with MDM Server.
Regards,
Mausam

Similar Messages

  • I'm using outlook email, Firefox 11 and Windows 7 Home but email links do not open Firefox even though it's my default browser, Fix?

    My email links fail to open Firefox 11. They used to last week but IE updated and now links in my outlook emails do not open Firefox 11 even though it's my default browser. When I change to IE as the default the links open IE.
    Your assumptions about my browser, operating system and others are correct.
    VERY FRUSTRATING. HELP, Please

    Hi,
    Please also try this: Windows Control Panel > '''Default Programs''' > '''Associate a file type or protocol with a program''' > look for '''.url''' > '''Change program''' to Firefox.
    edit: You have to restart Outlook or sometimes reboot the system for the change to take effect. Thanks AUnderhill.
    [http://windows.microsoft.com/en-us/windows7/Change-which-programs-Windows-uses-by-default Default Programs]

  • Safari not opening firefox even though firefox is set as default in safai

    I followed the recommended set up by going to preferences and setting firefox as the default browser.
    If I start Safari it does not open the web page using firefox
    If I activate firefox from the menu bar it works fine.
    Why is setting the default to firefox not working.

    Safari is not going to open Firefox since they are both browsers. When you set a default browser, it means that if you click a link in an email, say, the browser that the link will open with is Firefox. If you want to launch a browsing session on your own, you select the browser you want to use.
    Cheers,
    GB

  • INtegration Repository not opening

    Hi to all,
    when am opening IR it will showing as unknown file type, and also it is saving a file as repository.jnlp , could you plz clear my problem ,

    Hello Ravi,
    Go through these  blogs:
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
    /people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
    1) check the entries in the Host file for the XI boxes.
    2) Check if the JWS has J2SE 1.4.2 installed.
    3) check if the Cache contains comething for this boxes.
    Thanks,
    Satya Kumar
    Reward points if it is useful..

  • I received (and opened) a mail from a friend, it contained a link that I could not open ( I tried, though) . It was a hacked message, she later apologized.. Can my iPad2 be affected? please advise

    I received ( and opened, because I knew her address as safe) a mail from  friend, it contained a link that I tried to open, but it could not.
    It was clear it was a hacked email, she then apologized..could my iPad2 be affected by this? Please advise, thank you.

    You SHOULD be safe. The iPad's operating system is different from PC or Mac ones, and most viruses and malware are written to infect PC's or Mac's.
    If, for example, that link led to an .exe file the iOS can't run that so it does nothing.

  • Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

    I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
    Can anyone help me sort this out? If I log in as someone else Firefox works?
    == This happened ==
    Every time Firefox opened
    == the computer shut down unexpectedly ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can o a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • Firefox could not open 300 new tab with content loading

    Dear All,
    Thanks for good support in web browser world.Directly i come to the question.I have excel sheet where it has 300 hyperlinks as given below(example links 3)My Excel macro is written in such a way that this will open all the link in firefox "new tab " one by one.It was perfect and page was loading in previous versions(i could not remember the exact version but i could say an year before when i used firefox it worked well).Now i am having issues opening 300 new tabs with links.It gets started loading the page but before one page loading gets completed too many new links are opening but the page is not fully loaded at all.When i click the tab for each link and see in the browser the green clour processing round sysmbol keeps on rotating.Can you please look into this issue.
    If you want i can be contacted through email or if the information is not clear i am ready to connect through web sharing or to have a call.If you want spreadsheet for testing this issue i will send it.
    Link Used in Excel sheet example : 300 links in same site with differrent page:
    http://chartink.com/stocks/RECLTD.html
    http://chartink.com/stocks/bpcl.html
    http://chartink.com/stocks/itc.html
    Expecting your positive reply at the earliest.Thank you!
    Regards,
    Marx
    <sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

    Hi Marx,
    With this kind of data testing it is helpful to provide context to the issue you are trying to document. This technical information is very useful to the engineers working on the performance of Firefox and I am sure this is the kind of information they would love to see.
    Therefore I would like to put you in touch with this team to see what they can do with this information. Talk to the #perf channel in irc and they should be able to put you in the right direction. I am asking currently and see what I can find. Or in the meantime check out the current tab bugs in the Performance component of bugzilla provided in the search below: [https://bugzilla.mozilla.org/buglist.cgi?quicksearch=tab%20performance&list_id=9361049]

  • TB (currently v31.1.2) does not open certain attachments (e.g. jpg, pdf) properly.

    I've been having trouble opening certain attachments, notably .pdf and .jpg. Example: today I wanted to open a .jpg attachment. I right-click on the attachment and select Open. I get about one-third of the picture okay and the rest is just a muddy grey colour. For both pdfs and jpgs the file also shows in the body of the message as a collection of weird characters at the end of the message underneath the name of the file.
    [As an aside, I deal with this jpg problem by using my iPhone, opening the image, pasting it into the BODY of a new message, sending that message to my email address, opening that email in TB and then copy & paste to where I want it. I haven't yet found a way around the PDF problem except by opening and reading on my phone.]
    From the support pages I'm guessing this is a problem associated with mimeTypes but that is a step too far for me :) I go to Tools>Options>Attachments but just see a box that shows me two tabs (Incoming and Outgoing). Under incoming, none of the entries mention .pdf or .jpg and there is no mechanism to add such an entry even if I knew what I was doing.
    Any help/thoughts would be appreciated (running Windows 7 64 bit)

    Thanks for this Matt and Toad Hall. It makes sense to me. I had to install a firewall on my machine (long story ... to do with a game I play and a new VOIP router) and later, but around the same time, installed an update from TB. It was after the update that the trouble started so I assumed it was a TB issue.
    But although I can't check this, it is quite possible that I didn't receive any emails with PDF or JPG attachments between the time I installed the firewall and later installed the TB update and thus the problem caused by the firewall didn't show until after the update.
    The firewall is part of the Outpost suite from Agnitum (recommended by my ISP) so it all seems to tie in with what you have said.
    I have now attended to the issue with the firewall and it all seems to be okay.
    Many thanks

  • I downloaded FF4 a week ago and I think I used it only for that night. Ever since I just can not open it as it refuses to load. Prior to this I used the 3.6 edition without any problem. Presently I am using other browsers. What can I do to get it running?

    I just can't get FF4 to load from either the start button or the desktop.

    Have a look at [[firefox will not start]]

  • When i load a page i get "server not found", when i click retry it loads properly, what can i do to have firefox load page first time

    When i load a page it often tells me "server not found". When i click on retry most of the time it works. How do i fix it so that it works the first time.
    == This happened ==
    Every time Firefox opened
    == a couple months ago

    You either have an extension that causes that issue or some security software (firewall) is causing a delay.
    See [[Troubleshooting extensions and themes]]
    Also make sure that Firefox gets full unrestricted access to the internet.
    See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • How can I get back my Word docs now that Pages will not open them?

    How can I retrieve my Word docs now that Pages will not open them in Mavericks.  I have a brand new iMac with my evolving manuscript for a book transsferred from my now defunct MacBook Pro by external drive.  Pages tells me that "PowerPC apps are "no longer supported" and Mavericks will not open Microsoft Office, though it is still in Applications.  Would really appreciate ANY help!

    You will have to have an app that will open them first, you can upgrade to Office for Mac 2011 which is an Intel based app then open the docs and retry. Your docs were created with extremely old version of Office for Mac, version 2004!
    Another possiblity is  using a web based compatible MS Office for Mac app and see if it will open your doc and then save it, then attempt to re-open in Pages.

  • When I connect my iphone to my iMac, iTunes does not open automatically

    When I connect my iphone to my iMac, iTunes does not open automatically, even though I have the "open iTunes when this phone is connected" option checked. I'm on the latest Snow Leopard with iTunes 10.4 and use an iPhone 4 with iOS 4.3.4.  I think the problem began with the latest iTunes update.

    Found the answer in another discussion! Here's what worked:
    "I also had the same problem, iTunes 10.4 wouldn't launch when connecting iPhone 3GS.
    I unchecked "Launch iTunes when this iPhone is connected", restarted, launched iTunes and connected iPhone, rechecked "Launch iTunes when this iPhone is connected".  I was asked if I wanted to install iTunes helper and said yes.  All works again."

  • VI will not open; tries to open itself as a sub-vi

    Hello everyone, this is my first post here as a relatively new labview user.  I have a problem that I was hoping someone could help me out with. 
    I have a vi that worked fine yesterday, but will not open today even though I made no edits to the file between today and yesterday.
    For the sake of conversation, my vi is called TC.vi.  If I try to open TC.vi, the dialog that usually pops up when it can't find a sub-vi pops up and asked me to locate TC.vi.  If I open TC.vi from this dialog, the dialog pops back up immediately.  If I cancel, and click on "ignore sub-vi" the VI stops loading completely. 
    I have tried now on two different PC's with both v7.1 and v7.0 (the vi is a 7.0 file) and have tried re-naming the vi to something else.  Whatever I name it, that's what it asked me to locate when I try to open it.
    Does anyone have any advice on where I could go to try to get this resolved?
    I have attached the vi in case someone wants to give it a whack.  Let me know if you can open it.  If you do open it, you won't have all of the necessary subs for it to run, but if you can at least get it open, that will help tremendously.
    Thanks in advance.
    Sr. Development Technician
    Timken Research
    The Timken Co.
    Attachments:
    TC.vi ‏1512 KB

    Hi
    It seems that your VI is corrupted. simlar problems have been faced by lot of other peoples in past. dont waste time in finding the way to recover your vi. just start with the latest working vi you have (If you havent taken any backup then take a lesson from this)
    I had also faced a similar problem in past.
    tushar
    Tushar Jambhekar
    [email protected]
    Jambhekar Automation Solutions
    LabVIEW Consultancy, LabVIEW Training
    Rent a LabVIEW Developer, My Blog

  • Infopackage Loading error - The file is not open

    Hi Experts,
    I have an issue in my process chain. When the loading starts from deleting the psa contents then the infopackages - this is where the error starts. Infopackage source is 'Load Text-Type File from Application Server'. The error only says:
    - Errors in source system
    - The file 'path and filename.csv' is not open
    There are 10 infopackages to load and they're getting the files from AL11. I had successful run of the process chain before, but now it's always an error. Manual loading of the infopackages is fine, but once they ran in the process chain - always an error. Anyone encountered this type of issue? Can't seem to figure out what the cause is.
    Thanks in advance!
    -jay

    Hi,
    I have sometimes an error when I'm loading from frontend
    => the file is open in notepad or ms excel.
    Have you the same on the application server?
    => Ask your admin to check this.
    Or, have you now an other filename? UNIX server?
    => check upper and lower case.
    Do you see the file in AL11. Can you open it there?
    Sven

  • My Ipad 2 will not open apps that I have download from the app store but will open apps that came preinstalled.

    My IPAD 2 will some times not open apps that I have down load from the app store. But will open all of the preinstalled apps.I must go to the app store and install something and then all the apps will open. I should not have to install unwanted apps to keep my IPad working.I have reset and total reset nothing sames to work.

    Sounds to me like you may have an issue with the firmware, i.e. the iOS version that you are runing.  I also have an iPad 2  and sometimes have to restart it to get it to recognize and run a newly downloaded app.  And only once or twice have I had to uninstall and redownload an app that this didn't fix. I think this has more to do with the way an app has been coded more than anything else.
    You might try doing a "Reset All Settings" reset and set it up as a new iPad.  You should not lose any data, apps, music, videos, etc. that you have stored on your device.  I have done this a few times when tweaking the iOS 5.0.1 firmware and never lost anything.  You do have to re-enter your ID's and Passwords for wifi.  And of course you will need to go back into settings and reset any changes you may have made to things like location and notifications.
    I don't know if this will work, but if I was in your place this is the next step that I would take.

Maybe you are looking for