Repository Report - Error

When I run the Function Definition Report from Designer 6 (ckfdefin) I get the error message Rep 0736 "There exist uncompiled program units". Is there a bug in the install of Designer 6? I have loaded the recommended patch as well. If so, what do it do about it. I have not loaded Developer separate from Designer.

Sorry for the slow reply. I've been trying a number of different things to get this to work.
I reinstalled Developer as suggested but we don't have a patched version so there were no additional patches to apply. I re-ran the installer anyway to see if it would update anything.
I couldn't find any reference to Developer patches that might fix this issue in metalink.
I also tried messing with the JVM options to give it more memory etc but that didn't help.
After using the Designer diagnostics trace I got the arguments it uses to run the same report from the command line.
This resulted in the same issue. So at least it was consistent from Designer as well as the command line.
This suggests it is a reports issue rather than Designer.
Running the reports trace didn't provide any extra information. Found a bug that suggested changing any formula columns to not return NULL.
Tried updating the report to fix that too but no joy.
I will post here if I discover the solution.

Similar Messages

Designer 6.0 Repository Reports and PL/SQL Error ORA 6505

Trying to run some Repository reports give error
REP-1401 'cf_desc_textformula'. Fatal PL/SQL error occurred.
ORA-06505: PL/SQL: variable requires more than 32767 bytes
of contiguous memory
Occurs at e.g. ckentdef Seems to be that Reports has Problems
with the Entity Descriptions and Notes in the repository...
The Database Characterset is US7-ASCII
Any Ideas?
Michael
null

Hi, I4m not sure, but maybe it works,in WHEN OTHERS zone, to make commit after the insert in the table where you want the errors to log. You can make commit in a trigger if you specify in the declaration zone of the trigger:
PRAGMA AUTONOMOUS_TRANSACTION;

Error running Table Definition (cktci) Repository Report in Designer 10G

Hi
There seems to be some internal limitation when running the Table Definition Repository Report (cktci).
We have over a thousand tables defined in Designer and if I try to run the report for all tables it falls over with the reports.log saying
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: Error executing CA utility.
REP-3335: Unhandled Internal CA Error.
caxml 2
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
Not very useful information.
If the report is run using a smaller subset of tables. For example if I use a parameter of A% for the table name then it works OK.
I have been able to create reports up to about 600 pages but after that it falls over. So if I try to run the report with a parameter like S% it will fall over.
Just wondering if anyone else has come across this issue and found a fix.
There is the obvious workaround of running the report for smaller subsets of data but we would like it to be able to run for all tables if possible.
Any feedback appreciated.
Regards,
Adrian

Sorry for the slow reply. I've been trying a number of different things to get this to work.
I reinstalled Developer as suggested but we don't have a patched version so there were no additional patches to apply. I re-ran the installer anyway to see if it would update anything.
I couldn't find any reference to Developer patches that might fix this issue in metalink.
I also tried messing with the JVM options to give it more memory etc but that didn't help.
After using the Designer diagnostics trace I got the arguments it uses to run the same report from the command line.
This resulted in the same issue. So at least it was consistent from Designer as well as the command line.
This suggests it is a reports issue rather than Designer.
Running the reports trace didn't provide any extra information. Found a bug that suggested changing any formula columns to not return NULL.
Tried updating the report to fix that too but no joy.
I will post here if I discover the solution.

Error REP-0999 using Repository Reports

Hello !
I have problems with Repository Reports tool from Oracle Designer 6i. I want to save a previewed reports in RTF format, but when I use the command "generate to file" of the previewer, I get an error REP-0999 (unimplemented error with no more explanations). Im using Oracle Designer 6i in version 6.5.52.1.0 and Repository Reports in version 6.5.52.2.0.
Maybe I dont have a requested module, where can I get it ? can anyone help ?
thanks in advance,
regards,
Sylvain

Hi Sylvain,
I'm having similar problem. When I'm trying to run any of the Repository report it is moaning saying REP-0736 There are uncompiled program units. After compiling thry Report builder I get ORA-600 error but not able to successfully run any report. Wonder why ?
I'm having same versions as yours.
Regards
Nitin Hi !
My problem occurs when I try to generate a previewed report to a RTF file. At the same time, the "Report Builder" menu item from the "run" menu is disabled. Maybe I have to install Oracle Reports ? should I download it from Oracle web site ?
Have a good day,
Sylvain

Reporting Error while Restart to apply Recent Changes in OBIEE 11g in EM

Hi Friends,
I tried to open my rpd in online mode in OBIEE 11g, For that i went into EM for getting my rpd updated...
So after all doing changes, I need to restart for applying changes, so I restarted the system components
But only 80% of it started, remaining 20% is showing error and these are the error details
"Restart failed with 2 errors: problems reported by coreapplication_obis1, coreapplication
see detailed logs for more information"..
The above is the error message that i got..
The below are the log messages that reported error
Message type: Error
Message ID : -
Message : SEVERE:Element type:BI_instance,element_id:coreapplication,operation result:failed_to_start, detail Message-Error in starting one or more components of Bi instance; please check the server log files for detailed information..
Target : biadmin services(11.1.1)(Admin server)
Target type : application deployment
Log files : Admin server_diagnostic.log
Message type: Error
Message ID : -
Message : SEVERE:element type:process, element Id: coreapplication_obis1, operation result: failed_to_start, detail message- operation failed: start; oracle instance: instance4; component; coreapplication_obis1;msg: 0 of 1 processes started..
Target : biadmin services(11.1.1)(Admin server)
Target type : application deployment
Log files : Admin server_diagnostic.log
Message type : Error
Message ID : EM-02694
Message : Supplementary information regarding operation: BI_instance:coreapplication; failed_to_start; error in starting one or more components of BI instance; please check server log files for detailed information..
Target : em(Admin server)
Target type : application deployment
Log files : emoms.log
Message type : Error
Message ID : EM-02694
Message : Supplementary information regarding operation: PROCESS:coreapplication_obis1; failed_to_start; operation failed: start; oracle instance:instance4;component:coreapplication_obis1;msg 0 of 1 processes started..
Target : em(Admin server)
Target type : application deployment
Log files : emoms.log
how to solve these errors, because of this i couldn't able to open my repository in online mode as well as cannot able to update my .rpd file in presentation services in obiee 11g..
I couldn't able to understand the error that is pointing to me....
Help me friends..........
Regards,
Harry...

It's myself harry and i solved this problem, since this problem occurred for me as i tried to update my repository.rpd file for more than 5 times because of the error that it reported to me in my previous post...
How i solved this error means, i deleted all the other .rpd files(out of 5 i deleted 4) and i made some changes in my rpd file in the administration tool and after that i tried to update my rpd in EM..
Once it updated, then i gave restart to apply recent changes, after that my system components tempt to work as of 100%...
Anyway friends thanks for your views.....
Cheers
Harry...
Edited by: HariPrasad on Nov 13, 2010 2:59 AM

Repository reports cannot generate HTML report

Hello
In our Computing Labs, we have Oracle9i Designer installed on Windows XP Professional.
Our students are having a problem when they try to Run Report in Repository Reports.
The student first sees an error message for Internet Explorer that says "Cannot find "file:///c:/docume~1/%username%/LOACLS~1/Temp/ck*.tmp.html". Make sure...". %username% of course being the current user and ck* being the filename of the report.
If the user examines the contents of ~/Local settings/Temp, they will see that when this error message comes up, there is a file ck*.tmp (no HTML extension). The HTML file is never generated though.
When the user click on the OK button for the error message, Internet Explorer open to a blank page. When IE is closed, Repository Reports posts a message that says "CDI-21309: Unable to delete file c:\docume~1\%username%\locals~1\Temp\ck*.tmp.html". When the OK button from this message is clicked the user is returned to Repository Reports, but the report is never generated.
Our users are set up as Dynamic Local Users, and are members of the Power Users group. We do have some pretty tight restrictions on Group Policy.
When a user who is a member of Administrators (also dynamic local user) logs in and attempts to create a report, (s)he has no problem. Repository Reports functions exactly as it should.
I have already given Power Users complete access to all files on the hard drive, so I don't think it could be an NTFS file permission issue.
If anyone has any advice, it is certainly welcome. Our students need to be able to print off these reports for classes, and I am not familiar at all with Designer.
Thank you very much
David Summers
University of Idaho ITS
Student Computing Labs

Here is how I resolved my problem with non admin users not being able to run reports.
Designer 9i ver 9.0.2.80.6
Repository Reports ver 9.0.2.80.4
Problem - When non Administrator users try to generate a report in Repository Reports, they either get a file not found error for the HTML report (and IE will not show the report) or Repository Reports stops responding (and rwrun.exe has to be manually killed).
Fixes
-%TMP% and %TEMP% environment variables must resolve to paths that are fewer than 30 characters. In our environment (WindowsXP with Novell Dynamic Local Users), %TMP% and %TEMP% were the temp folders in the user's profile, which is a long path. Changing the environment variables to point to c:\temp was one step in resolving the issue. Although there is a patch released related to this, my installed version is post-patch and I still had to change the temp environment variables.
-HKLM\SOFTWARE\ORACLE\HOME0\REPORTS_TMP must be set to a writable area for the user group using Designer and Reports. In our environment it was set (during install) to the local administrators temp space (in administrators local profile) - I'd guess it gets set to whatever %TMP% or %TEMP% is for whichever user installs the application. Our users cannot write to this folder, so setting this registry value to c:\temp was another step in resolving the issue.
-c:\OraHome1\reports\logs must be writable for whichever user group is running Reports. Before making this change but after making the previous two changes, reports would simply freeze for Power Users. When trying to log off, rwrun.exe had to be manually killed - and sometimes a Dr Watson report would come up and ask to be sent in. By granting the user group that uses Reports write permissions to this folder (or the equivalent in your environment), Repositry Reports no longer freezes and successfully generates the HTML report.
David Summers
University of Idaho ITS
Student Computing Labs

Repository Reports (Designer 10.1.2.5) on Windows 7

I've been running Designer for years with much satisfaction. About 9 months ago I upgraded to Windows 7 and can no longer run any Repository Reports. I am running Designer Version 10.1.2.5 with Configuration 4.0.12.101.0 running on Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production.
When I run any Repository Reports, they fail with a Windows 7 pop-up message saying "Reports Runtime has stopped working. A problem caused the program to stop working correctly. Please close the program." followed by another pop-up that "CDI-21338: No results to preview".
I went through the process of re-installing Designer but no improvement. Do I need a new version of Reports Runtime? Where should I get it from?

Do you have Windows 7 32bit or 64bit? Oracle Designer is only supported on 32bit Windows (supported does not mean it will not work on 64bit windows)
Have a look at metalink/My Oracle Support note: "Error CDI-21338 When Running Repository Reports [ID 295618.1]" since the error can have several causes.

Getting BO 4.1 File Repository Server Error

I am trying to save a 2008 report directly from Crystal Reports 2008 to a BO 4.1 repository and I am getting the following error
<Caution Triangle Image> File Repository Server Error:
I am able to upload the 2008 Crystal Report using the Add / Local Document directly to the BO 4.1 server but it only allows me to make a copy not overwrite.
Does anyone know what I need to do, if anything to get it so I can save the report directly form Crystal Reports
thanks

Hi Alan,
CR 2008 is supposed to work with BO XI 3.1. For BI 4.1 you should use CR 2013.
-Abhilash

Repository Reports problem

Hi!
I've Designer 9.0.2.2 and Oracle Server 8i (on Win2k).
I want to use Repository Reports to print my application system.
I've chosen the report, then I've set the parameters but I can't obtain a single page in output, whatever report I can try.
The report isn't in the output directory and the browser can't open it (gives an error like: /dir/ckxxx.tmp.html not found)
The Reports Builder works well and I can produce a report. But I have no idea of what to do with Repository Reports.
The output directory is writeable. I've reinstalled Designer (the software only), upgraded, activated the logs and followed the operations (but I don't know how to launch the report with its parameters in the "cmd.exe" shell).
Can anyone suggest me any idea?

Thank you for the tip, but the destination dir is C:\temp and the TMP and TEMP environment vars are set to c:\temp and there are read/write rights for "Everyone", so
I tried another way following the Metalink doc.#60781.1 (maybe it's old...:), i made a insert-trigger into cdi_temp_rpt_tables and run a report, this revealed me that Repository Reports doesn't insert any row in that table!
Then I've manually launched a report with RWRUN, but it asks me (REP-0157) the 'Distribute' param, even if it is in the command line.
Sincerely I can't understand. I don't use Reports Server as a service, but it is automatically launched when I open - for example - http://servername:8888/reports/rwservlet/showjobs?server=rep_servername
I've tons of docs, but I can't find anything helpful, maybe I lack something stupid & important like starting a service!
Thanks
Enrico

WORKLOAD REPOSITORY report for

What fields are import to check in the WORKLOAD REPOSITORY report ?

1008032 wrote:
Dear
This is happen due to you are given the begin snap id and end snap id not between the shut down time .EX begin snap it at 12 am 1521 and you shut down at 12:30 am and you you give the 1:00 am snap id 1522 .That time system can not collect the statistics betwwn 1521 and 1522.
Or you should enable statistics_level parameter if it 11gr2 you should enable controlfile_management_pack _access='DIAGNOSTIC+TUNING'
issue not resolved please post your error..........
Thanks&regards
SS.vijaibabuI checked my statistics_level it shows value TYPICAL which I think is right.
SQL> sho parameter statistics_level
NAME TYPE VALUE
statistics_level string TYPICALAlso I given snap id which between single startup & shutdown still the problem is same sqlplus session get closed after asking for snal ids.
If error gets generated where it gets generated?

IF Condition in a PL/SQL Script give a report error.

Hello, Im German and I hope you can unterstand my Question.
First, I work with the HTML DB Version 1.6.0.0.0.87 and the Oracle Version 9.2.0.6.
I create a SQL Report, where a PL/SQL Script return the SQL Statement for the Report. This is my source-code, I have short it...:
Declare
sql_str varchar(2000);
sql_str_select varchar(1000) :=' select dim_sparte ... ';
sql_str_from varchar(1000) := ' from faktentabelle,dim_sparte ';
sql_str_where varchar(1000):= ' where and faktentabelle.zeit_id = :POPUP_ZEIT ';
sql_str_groupby varchar(1000):= ' group by dim_sparte.name, faktentabelle.zeit_id ';
Begin
If ( (V('POPUP_NETZGEBIET') is not NULL) and (V('POPUP_NETZGEBIET') <>
'Alle Netzgebiete')) THEN
sql_str_select := sql_str_select || ' ,dim_organisationseinheit.netzgebiet_name ';
sql_str_from := sql_str_from || ' , dim_organisationseinheit ';
sql_str_where := sql_str_where || ' and faktentabelle ... and
dim_organisationseinheit.netzgebiet_name = :POPUP_NETZGEBIET';
sql_str_groupby := sql_str_groupby || ' , dim_orga .... ';
End IF;
sql_str:= sql_str_select || sql_str_from || sql_str_where || sql_str_groupby;
htp.print(sql_str);
Return sql_str;
End;
This Script include a IF-THEN condition. The Condition is true and the sql-String-Variables are updatet.
I can get the string with htp.print() and the Statement is OK.
The report get a Error report error: ORA-1403: no data found. If I copy the printet sql String in a new Report Region with SQL String, the Report is OK. When I write IF(true) instead of IF( Condition) the Report is OK, too.
I try ist with Varibalen V(name) and with :name. Its always the same problem. I cant use IF-THEN-Else Conditions in a Script.
Please help me and say me what is the problem???
Thanks,
Simona

Hi Simona,
In the sql region below the region source see that you have " Use Generic Column Names (parse query at runtime only)" check and not " Use Query-Specific Column Names and Validate Query".
This error you usually get when you have a mismatch in your report heading.
Vivek
[email protected]

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

Report error: ORA-06502: PL/SQL: numeric or value error: character string b

I have a form which uses a customer form/report, drop downs etc..
the debug shows it running this statement
...Execute Statement: begin begin SELECT distinct initcap(RTRIM (LTRIM (e.surname, ' *0123456789-/:.?,'), ' *0123456789-/:.?,') || ', ' || RTRIM (LTRIM (e.first_name, ' *0123456789-/:.?,'), ' *0123456789-/:.?,' )) empname, e.ID bulk collect into wwv_flow_utilities.g_display,wwv_flow_utilities.g_value FROM dms.dms_employees@dmsprd e, dms.dms_employee_contracts@dmsprd ec WHERE e.ID = ec.emp_id and e.surname like '%%' AND :p75_date BETWEEN ec.start_date AND NVL (ec.end_date, :p75_date) AND e.brh_id = 3654 ORDER BY 1; end; end;
Then says
"report error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
Any Ideas?
Thanks
Dean

Denes Kubicek wrote:
A select list is limited in size. I am not sure what the limit is but that is definitelly the case.The maximum size for the HTML generated for a select list is 32K.
86 options sounds on the low side to be hitting that limit, but there are other concerns to this as well. Scrolling through hundreds/thousands of options in a select list is a pain for users, and huge select lists produce bloated pages that impact load times and network bandwidth. That list of around 200 countries you find on many sites is about the sensible maximum length for a select list.
You should use popups.Indeed.

Report error:ORA-06502: PL/SQL: numeric or value error: character to number

The oracle application express environment is created by installing the HTTP Server on the windows server and the application express 3.2.1 components on the 11.1.0.7 oracle database on UNIX. The installation is successfully and have not seen any issues during the installation. After completing all the steps, when tried to login and click the application builder or workspace components, I see the error message
report error:ORA-06502: PL/SQL: numeric or value error: character to number.
This error message is seen on most of the pages when trying to accessed and not able to understand the reasons behind it. Its a brand new environment setup and not even presented to developers to test it.
Below error message is always seen when trying to access most of the components like application builder, schema comparison and some other tabs. Please advice
report error:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Edited by: user589320 on Jun 9, 2011 5:17 PM

I think its better you use APEX 4.x version ratherthan using old version.
You will get more features and some bug fixes and also it's easy for you to get some help when you need.
* If this answer is helpfull or correct then please mark it and grant the points.

Report error:ORA-06502: PL/SQL: numeric or value error: character string bu

We face the above error in HTMLDB (APEX) application Ver 3.1.0. This occurs when we try to display more number of rows/records in drop-down list (LOV in tabular forms). We are able to display 200 records in LOV. When the list of records exceeds 230, we face the below error
report error:ORA-06502: PL/SQL: numeric or value error: character string buffer too small
the values listed in LOV are from tables (one of the columns in table)
Could anyone give us a solution?

Hi
As you are using a tabular form, you could actually do the following:
1 - In the tabular form column's attributes, set the following:
Display as: Select List (query based on LOV)
Display extra values: Yes
List of values definition: SELECT null d, null r FROM DUAL
2 - Add a new page item and set it to generate your select list
3 - Create an HTML region with no template and use the following for its source:
<script type="text/javascript">
function loadList(c, l)
var s = document.getElementsByName(c);
var lItem = document.getElementById(l);
var lLength = lItem.options.length;
var k;
var j;
var x = lItem.innerHTML;
var v;
var o;
var z;
for (k = 0; k < s.length; k++)
z = s[k];
v = z.value;
z.options.length = 0;
for (j = 0; j < lLength; j++)
o = new Option()
o.value = lItem[j].value;
o.text = lItem[j].text;
z.options[j] = o;
z.value = v;
if (z.selectedIndex == -1)
z.selectedIndex = 0;
loadList("f05", "P1_MGR");
</script>
(Change "f05" and "P1_MGR" as appropriate to your column and your new page item respectively)
Now, when you load the page, the select list contains a null entry plus the entry already on the database. The javascript kicks in automatically, loops through every entry in the "f05" column, copies the existing value, replaces the select list with the new page item version and sets its value to the copied value.
Your new page item could be in a DIV tag that has a style of "display:none" to hide it from view.
Andy

Repository Report - Error

Similar Messages

Maybe you are looking for