Repository reports differences

Hi,
Does anyone have a complete list of the changes that where made to the naming of Repository Reports between 1.3.2 and 6.0. I have to deliver CDM reports given in the old name from a Designer 6.0 repository and I can't find the right reports.
Thanks for the help.
RATL..

hi,
if your where to run a statpack report and an awr report from sql you would see very little difference between them as far as I have seen. there must however be some benefits for awr as this is the way that Oracle is going. As far as I am aware you need no special privilege to run awr.
rgds
alan

Similar Messages

  • Designer 6.0 Repository Reports and PL/SQL Error ORA 6505

    Trying to run some Repository reports give error
    REP-1401 'cf_desc_textformula'. Fatal PL/SQL error occurred.
    ORA-06505: PL/SQL: variable requires more than 32767 bytes
    of contiguous memory
    Occurs at e.g. ckentdef Seems to be that Reports has Problems
    with the Entity Descriptions and Notes in the repository...
    The Database Characterset is US7-ASCII
    Any Ideas?
    Michael
    null

    Hi, I4m not sure, but maybe it works,in WHEN OTHERS zone, to make commit after the insert in the table where you want the errors to log. You can make commit in a trigger if you specify in the declaration zone of the trigger:
    PRAGMA AUTONOMOUS_TRANSACTION;

  • Repository report don't function - cannot find C:\....\Temp\...file.html

    help me

    I ran the report using navigator--->repository reports.
    This report gets generated as *.html file into your c:\document\username\local\temp folder.
    Try running it again and ckeck for the report file name to locate the folder. The file name starts with ck*
    Good luck
    Shirish Gadkari

  • What is interactive report , difference bet interactive and classic report

    what is interactive report , difference bet interactive and classic report

    Hi
    Check this thread to get more idea about ALVs.
    Interactive ALV
    DIRLL DOWN AND INTERACTIVE REPORT
    http://www.sap-img.com/abap/difference-between-drilldown-report-and-interactive-report.htm
    As the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers.
    And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.
    We can have a basic list (number starts from 0) and 20 secondary lists (1 to 21).
    Events associated with Interactive Reports are:
    AT LINE-SELECTION
    AT USER-COMMAND
    AT PF<key>
    TOP-OF-PAGE DURING LINE-SELECTION.
    HIDE statement holds the data to be displayed in the secondary list.
    sy-lisel : contains data of the selected line.
    sy-lsind : contains the level of report (from 0 to 21)
    Interactive Report Events:
    AT LINE-SELECTION : This Event triggers when we double click a line on the list, when the event is triggered a new sublist is going to be generated. Under this event what ever the statements that are been return will be displayed on newly generated sublist.
    AT PFn: For predefined function keys...
    AT USER-COMMAND : It provides user functions keys.
    TOP-OF-PAGE DURING LINE-SELECTION :top of page event for secondary list.
    http://abapprogramming.blogspot.com/search/label/INTERACTIVE%20REPORT%20BASICS

  • Repository reports cannot generate HTML report

    Hello
    In our Computing Labs, we have Oracle9i Designer installed on Windows XP Professional.
    Our students are having a problem when they try to Run Report in Repository Reports.
    The student first sees an error message for Internet Explorer that says "Cannot find "file:///c:/docume~1/%username%/LOACLS~1/Temp/ck*.tmp.html". Make sure...". %username% of course being the current user and ck* being the filename of the report.
    If the user examines the contents of ~/Local settings/Temp, they will see that when this error message comes up, there is a file ck*.tmp (no HTML extension). The HTML file is never generated though.
    When the user click on the OK button for the error message, Internet Explorer open to a blank page. When IE is closed, Repository Reports posts a message that says "CDI-21309: Unable to delete file c:\docume~1\%username%\locals~1\Temp\ck*.tmp.html". When the OK button from this message is clicked the user is returned to Repository Reports, but the report is never generated.
    Our users are set up as Dynamic Local Users, and are members of the Power Users group. We do have some pretty tight restrictions on Group Policy.
    When a user who is a member of Administrators (also dynamic local user) logs in and attempts to create a report, (s)he has no problem. Repository Reports functions exactly as it should.
    I have already given Power Users complete access to all files on the hard drive, so I don't think it could be an NTFS file permission issue.
    If anyone has any advice, it is certainly welcome. Our students need to be able to print off these reports for classes, and I am not familiar at all with Designer.
    Thank you very much
    David Summers
    University of Idaho ITS
    Student Computing Labs

    Here is how I resolved my problem with non admin users not being able to run reports.
    Designer 9i ver 9.0.2.80.6
    Repository Reports ver 9.0.2.80.4
    Problem - When non Administrator users try to generate a report in Repository Reports, they either get a file not found error for the HTML report (and IE will not show the report) or Repository Reports stops responding (and rwrun.exe has to be manually killed).
    Fixes
    -%TMP% and %TEMP% environment variables must resolve to paths that are fewer than 30 characters. In our environment (WindowsXP with Novell Dynamic Local Users), %TMP% and %TEMP% were the temp folders in the user's profile, which is a long path. Changing the environment variables to point to c:\temp was one step in resolving the issue. Although there is a patch released related to this, my installed version is post-patch and I still had to change the temp environment variables.
    -HKLM\SOFTWARE\ORACLE\HOME0\REPORTS_TMP must be set to a writable area for the user group using Designer and Reports. In our environment it was set (during install) to the local administrators temp space (in administrators local profile) - I'd guess it gets set to whatever %TMP% or %TEMP% is for whichever user installs the application. Our users cannot write to this folder, so setting this registry value to c:\temp was another step in resolving the issue.
    -c:\OraHome1\reports\logs must be writable for whichever user group is running Reports. Before making this change but after making the previous two changes, reports would simply freeze for Power Users. When trying to log off, rwrun.exe had to be manually killed - and sometimes a Dr Watson report would come up and ask to be sent in. By granting the user group that uses Reports write permissions to this folder (or the equivalent in your environment), Repositry Reports no longer freezes and successfully generates the HTML report.
    David Summers
    University of Idaho ITS
    Student Computing Labs

  • Steps for Getting Repository Reports to Work in SCM 9024

    Have installed Des9i/SCM 9024. With this install, repository reports are not installed without the base release of O9iDS R2. What are the exact steps for getting the Designer Repository Reports to work via the RON in SCM 9024? Basically, I would like to have the Repository Reports option 'enabled' in the RON.
    Does 9iDS 902 have to be installed in an Oracle Home first, and then install SCM into the same OH? I would rather not have to install the entire iDS just to be able to have object reporting in SCM.
    -- Al

    Hello Joe Matheis. Welcome to the Apple Discussions!
    Let's double-check your AirPort's configuration for streaming iTunes ...
    Either connect to the AX's wireless network or temporarily connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort > Wireless
    o Wireless Mode: Join a wireless network
    o Network Name: <existing wireless network's name or SSID>
    o Wireless Security: <select the encryption type of the existing wireless network>
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX

  • Repository Reports (Designer 10.1.2.5) on Windows 7

    I've been running Designer for years with much satisfaction. About 9 months ago I upgraded to Windows 7 and can no longer run any Repository Reports. I am running Designer Version 10.1.2.5 with Configuration 4.0.12.101.0 running on Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production.
    When I run any Repository Reports, they fail with a Windows 7 pop-up message saying "Reports Runtime has stopped working. A problem caused the program to stop working correctly. Please close the program." followed by another pop-up that "CDI-21338: No results to preview".
    I went through the process of re-installing Designer but no improvement. Do I need a new version of Reports Runtime? Where should I get it from?

    Do you have Windows 7 32bit or 64bit? Oracle Designer is only supported on 32bit Windows (supported does not mean it will not work on 64bit windows)
    Have a look at metalink/My Oracle Support note: "Error CDI-21338 When Running Repository Reports [ID 295618.1]" since the error can have several causes.

  • Error running Table Definition (cktci) Repository Report in Designer 10G

    Hi
    There seems to be some internal limitation when running the Table Definition Repository Report (cktci).
    We have over a thousand tables defined in Designer and if I try to run the report for all tables it falls over with the reports.log saying
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-271504897: Error executing CA utility.
    REP-3335: Unhandled Internal CA Error.
    caxml 2
    REP-0002: Unable to retrieve a string from the Report Builder message file.
    REP-271504897:
    Not very useful information.
    If the report is run using a smaller subset of tables. For example if I use a parameter of A% for the table name then it works OK.
    I have been able to create reports up to about 600 pages but after that it falls over. So if I try to run the report with a parameter like S% it will fall over.
    Just wondering if anyone else has come across this issue and found a fix.
    There is the obvious workaround of running the report for smaller subsets of data but we would like it to be able to run for all tables if possible.
    Any feedback appreciated.
    Regards,
    Adrian

    Sorry for the slow reply. I've been trying a number of different things to get this to work.
    I reinstalled Developer as suggested but we don't have a patched version so there were no additional patches to apply. I re-ran the installer anyway to see if it would update anything.
    I couldn't find any reference to Developer patches that might fix this issue in metalink.
    I also tried messing with the JVM options to give it more memory etc but that didn't help.
    After using the Designer diagnostics trace I got the arguments it uses to run the same report from the command line.
    This resulted in the same issue. So at least it was consistent from Designer as well as the command line.
    This suggests it is a reports issue rather than Designer.
    Running the reports trace didn't provide any extra information. Found a bug that suggested changing any formula columns to not return NULL.
    Tried updating the report to fix that too but no joy.
    I will post here if I discover the solution.

  • Run Option disabled in Repository Reports

    I am using a fresh install of Oracle 9i 9.2.0.1.0 on XP Pro and Designer 9i 9.0.2.7. Everything functions perfectly until I attempt to run Repository Reports. The Report Navigator responds and I can select the container and diagram for a report, however the run button and options are disabled. Regardless of what report I attempt to run I cannot get the run option to be enabled.
    Any ideas?
    Thanks.
    Keith

    Keith,
    Do you have Oracle Reports installed on the same machine? You need this to run the repository reports. You can check by running the Oracle Universal Installer and clicking the Installed Products button then navigate down the hierarchy.

  • Error REP-0999 using Repository Reports

    Hello !
    I have problems with Repository Reports tool from Oracle Designer 6i. I want to save a previewed reports in RTF format, but when I use the command "generate to file" of the previewer, I get an error REP-0999 (unimplemented error with no more explanations). Im using Oracle Designer 6i in version 6.5.52.1.0 and Repository Reports in version 6.5.52.2.0.
    Maybe I dont have a requested module, where can I get it ? can anyone help ?
    thanks in advance,
    regards,
    Sylvain

    Hi Sylvain,
    I'm having similar problem. When I'm trying to run any of the Repository report it is moaning saying REP-0736 There are uncompiled program units. After compiling thry Report builder I get ORA-600 error but not able to successfully run any report. Wonder why ?
    I'm having same versions as yours.
    Regards
    Nitin Hi !
    My problem occurs when I try to generate a previewed report to a RTF file. At the same time, the "Report Builder" menu item from the "run" menu is disabled. Maybe I have to install Oracle Reports ? should I download it from Oracle web site ?
    Have a good day,
    Sylvain

  • Repository Reports problem

    Hi!
    I've Designer 9.0.2.2 and Oracle Server 8i (on Win2k).
    I want to use Repository Reports to print my application system.
    I've chosen the report, then I've set the parameters but I can't obtain a single page in output, whatever report I can try.
    The report isn't in the output directory and the browser can't open it (gives an error like: /dir/ckxxx.tmp.html not found)
    The Reports Builder works well and I can produce a report. But I have no idea of what to do with Repository Reports.
    The output directory is writeable. I've reinstalled Designer (the software only), upgraded, activated the logs and followed the operations (but I don't know how to launch the report with its parameters in the "cmd.exe" shell).
    Can anyone suggest me any idea?

    Thank you for the tip, but the destination dir is C:\temp and the TMP and TEMP environment vars are set to c:\temp and there are read/write rights for "Everyone", so
    I tried another way following the Metalink doc.#60781.1 (maybe it's old...:), i made a insert-trigger into cdi_temp_rpt_tables and run a report, this revealed me that Repository Reports doesn't insert any row in that table!
    Then I've manually launched a report with RWRUN, but it asks me (REP-0157) the 'Distribute' param, even if it is in the command line.
    Sincerely I can't understand. I don't use Reports Server as a service, but it is automatically launched when I open - for example - http://servername:8888/reports/rwservlet/showjobs?server=rep_servername
    I've tons of docs, but I can't find anything helpful, maybe I lack something stupid & important like starting a service!
    Thanks
    Enrico

  • Repository reports

    The repository reports does not show the changes that are made to
    attribute description. Only the old descriptions are displayed.
    Also,I see two sets of the same entity and their attributes in
    the reports. But both does not have the changed description for
    attributes.
    Any help is appreciated.
    Thanks

    Sue,
    Which report were you running?
    Have you tried the compare tool in the commandline utility? You
    can print the compare result to a file.
    thanks
    David

  • Repository Reports Parameters Palette

    When I run the Repository Reports, I get the 2 windows (Pre-defined Reports List and the Parameters Palette). However, the Parameters Palette window remains blank - consequently any report I run comes back empty !
    Does anyone have a suggestion as to the possible cause/remedy of this problem ?
    Thanks,
    Derek

    The interesting picture turns out.
    if I generate the report in format HTML, XML or RTF Russian font shows that normally, and here if I generate in format PDF that as well as in window Report Runtime instead of Russian not clear symbols.
    It turns out that at delivery of the report in Report Runtime and PDF it(he) generates them in the coding Western and in other cases normally cyrillics (Windows.)
    If I in IE change the coding of the generated report with cyrillics (Windows) on Western that just and I receive a picture with Russian fonts as in Report Runtime and PDF generation.
    Message was edited by:
    Gooddy

  • WORKLOAD REPOSITORY report for

    What fields are import to check in the WORKLOAD REPOSITORY report ?

    1008032 wrote:
    Dear
    This is happen due to you are given the begin snap id and end snap id not between the shut down time .EX begin snap it at 12 am 1521 and you shut down at 12:30 am and you you give the 1:00 am snap id 1522 .That time system can not collect the statistics betwwn 1521 and 1522.
    Or you should enable statistics_level parameter if it 11gr2 you should enable controlfile_management_pack _access='DIAGNOSTIC+TUNING'
    issue not resolved please post your error..........
    Thanks&regards
    SS.vijaibabuI checked my statistics_level it shows value TYPICAL which I think is right.
    SQL> sho parameter statistics_level
    NAME TYPE VALUE
    statistics_level string TYPICALAlso I given snap id which between single startup & shutdown still the problem is same sqlplus session get closed after asking for snal ids.
    If error gets generated where it gets generated?

  • Repository report just hangs when run!

    I am running Developer 9.0.2.80.6 on Windows XP. I've installed 9i database and development tools.
    I was able to build a ER diagram in Designer, and now I want to report on it. I go into Repository Reports, select a report (something simple like "attribute definitions", I give it a container name, an entity name, the name of my er diagram, and then when I click on the 'run report' button, nothing happens. I've given it plenty of time to do something, but nothing ever happens. Eventually I use task manager to shut it down (it says its not responding).
    Any help is much appreciated!!
    J

    Thanks Shirish, but there's no file output at all.
    I've also noticed that it leaves the process 'RWRUN.exe' around until I kill it or shut down.
    I also tried running a report via Reports Developer and that one worked fine.
    Does anyone know just which servers/processes need to be running in order to run these reports? I wonder what I'm missing. It is rather critical, as I'm developing a system for a client and this client requires a number of reports from Designer!
    J

Maybe you are looking for