Repository Reports feature is disabled

Hello All,
I am using Oracle Repository for performing SCM. However the Repository Reports feature in the SCM client is always disabled. Can anyone please tell as to what other components need to be installed so as to avail of this feature?
Regards,
Sushant P. Lotlikar.

Vishal,
Thanx for your reply. However, the problem has not yet been solved.
I have 3 ORACLE HOMES on my machine.
OraHome81 - contains the Oracle database server (ver 8.1.7.0.0)
d2k_home - contains Developer 2000 suite. Currently, I have only installed Oracle Forms 6.0.8.13.0 in this home
repository_home - contains the Oracle repository client.
I have installed Oracle Reports 6.0.8.11.3 component of the Repository Client Installation in RESPOSITORY_HOME on my machine. However, the Repository Reports feature in the RON (Repository Object Navigator) is still disabled.
Thanx for help.
Regards
Sushant P. Lotlikar

Similar Messages

Adding second instance of SSRS reporting features disabled

I am running SQL Server 2008 R2 server on windows 2008 server.
On the MSSQLServer instance, I already have Reporting services configured in Native mode.
I am trying to add another instance of SSRS in integrated mode. I have followed the steps shown below. The account used has administrator privilages on the server and the MSSQLServer instance.
When I am trying to select the reporting services, the features are disabled.
Any ideas on how I can solve this issue.
Thanks
Nate

Hello Nate,
You selected "Add feature to an existing instance" and in your existing instance SSRS is already installed; select "New instance" instead to install a new instance of SSRS.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Run Option disabled in Repository Reports

I am using a fresh install of Oracle 9i 9.2.0.1.0 on XP Pro and Designer 9i 9.0.2.7. Everything functions perfectly until I attempt to run Repository Reports. The Report Navigator responds and I can select the container and diagram for a report, however the run button and options are disabled. Regardless of what report I attempt to run I cannot get the run option to be enabled.
Any ideas?
Thanks.
Keith

Keith,
Do you have Oracle Reports installed on the same machine? You need this to run the repository reports. You can check by running the Oracle Universal Installer and clicking the Installed Products button then navigate down the hierarchy.

Error REP-0999 using Repository Reports

Hello !
I have problems with Repository Reports tool from Oracle Designer 6i. I want to save a previewed reports in RTF format, but when I use the command "generate to file" of the previewer, I get an error REP-0999 (unimplemented error with no more explanations). Im using Oracle Designer 6i in version 6.5.52.1.0 and Repository Reports in version 6.5.52.2.0.
Maybe I dont have a requested module, where can I get it ? can anyone help ?
thanks in advance,
regards,
Sylvain

Hi Sylvain,
I'm having similar problem. When I'm trying to run any of the Repository report it is moaning saying REP-0736 There are uncompiled program units. After compiling thry Report builder I get ORA-600 error but not able to successfully run any report. Wonder why ?
I'm having same versions as yours.
Regards
Nitin Hi !
My problem occurs when I try to generate a previewed report to a RTF file. At the same time, the "Report Builder" menu item from the "run" menu is disabled. Maybe I have to install Oracle Reports ? should I download it from Oracle web site ?
Have a good day,
Sylvain

Question on Interactive Report feature sorting

Hi,
I have about over 10,000 records and used the interactive report feature on Apex. For some reason, on the timestamp column, I tried to resort in the latest date and it only shows the latest date of last year and didn't show the latest date of 2010. I tried changing the timestamp column to sort by descending, and it doesn't show any latest date in 2010, only 2009.
Could this be an issue with the interactive report issue.
Thanks,
Michael

Hi,
If you have default 10,000 row limit in interactive report , sorting work only for that record set.
Increase rows that report show, or you can use ORDER BY in report select to get e.g. 10,000 latest row.
Br,Jari

Issue in the Reporting feature of SAP BPC NW 7.0

Hi everyone,
I am facing an issue with respect to the Reporting feature in SAP BPC NW 7.0 version. I am supposed to generate a P&L report using the EVDRE function.
Issue-
In the report that I have generated, the system is retrieving only a subset of the broad-level P&L heads. e.g. while BPC is retrieving the EBITDA, EBIT and PAT figures, it is not retrieving the Depreciation, Interest and Tax figures in the report. All the members that are not getting displayed are members with ACCTYPE= 'EXP', while the ones getting displayed are members with ACCTYPE= 'INC'.
Even though the 'EXP' figures are not getting displayed, the amounts are getting deducted correctly. (i.e. even though Interest amount is not getting displayed in the report, the PBT figure being displayed is correctly calculated as PBT= EBIT-Interest).
Also, I am able to see the amount in Interest payments, if I drill to the base-member elements (G/Ls in my case)
Would really appreciate if someone could shed some light on what might be the probable issue.
Thanks in advance,
Sameer Rane

Hi Nilanjan/All,
Thanks a lot for your reply. I suppose, I was not very clear about my problem. The issue is with regards to the value for the Account-dimension members with ACCTYPE = 'EXP' and not with the members per se.
Setting the MemberSet Filter addresses the issue of getting particular Dimension members in the report. In my case, I am already seeing all the necessary members in my report (I have explicitly created a list of all the members I want to see in my report in the MemberSet parameter). However, I am not able to see any values for these members for any of the time periods (even though the values exist).
Also, I don't get any values for some of the INC items as well (e.g. OperationsIncome) inspite of the fact that the base member G/Ls under this account hold values.
Would appreciate any help towards resolving this issue.
Thanks in advance,
Sameer

Designer 6.0 Repository Reports and PL/SQL Error ORA 6505

Trying to run some Repository reports give error
REP-1401 'cf_desc_textformula'. Fatal PL/SQL error occurred.
ORA-06505: PL/SQL: variable requires more than 32767 bytes
of contiguous memory
Occurs at e.g. ckentdef Seems to be that Reports has Problems
with the Entity Descriptions and Notes in the repository...
The Database Characterset is US7-ASCII
Any Ideas?
Michael
null

Hi, I4m not sure, but maybe it works,in WHEN OTHERS zone, to make commit after the insert in the table where you want the errors to log. You can make commit in a trigger if you specify in the declaration zone of the trigger:
PRAGMA AUTONOMOUS_TRANSACTION;

"Edit Report" option getting disabled on saving the report in BPC 10.0

I have created input schedules using "Edit Report" functionality in BPC 10.0 NW, added a few buttons and corresponding VB code and tested the input schedule by sending data and running data manager package. Everything is working fine. After that I saved the input schedule and closed the Excel. On reopening the excel Add-in and the input schdule, the "Edit report" option becomes disabled and refresh and other functionalities available for the report get disabled. I have faced this issue a couple of times. Has anybody else faced this issue? Can someone let me know the resolution to this problem?

Hi Shruti,
This is probably happening because the report/input schedules is not getting connected. Please check the connections once.
Also if you had named the report in "Edit Report" earlier, say for example "Sales Report", once the report is open you should be able to see this name on the EPM context pane, right side under Current Report: Connected to "Your Model" and below that in the drop down the default selection should be "Sales Report". This means that the report is connected and the Edit Report option is active.
Hope this helps.
Regards,
Bhairavi

Firefox immediately switching to new tab even when that feature is disabled on right-click open in new tab or on ctrl+click a link. Please help.

Firefox switches immediately to new tab or the immediate next tab if multiple tabs are open, even when the respective feature is disabled, whenever I open a link by -
1. Right-click > open in new tab
2. Ctrl + click a link
Earlier it did not happen like this. It is really very annoying. Re-installation and clean installation of the latest version did not helped.
And this is happening mainly when I am using Facebook. Earlier it never happened so with Facebook.

I don't have the divX plug-in and I still have this problem. Why should plug-ins that are not even triggered by the affected pages alter Firefox's behavior. Feels like bad architecture.

HT201376 Hello, I am trying to reset my macbook pro to its factory settings but I can't type the name of the formatted disk nor can I click on erase, as this feature is disabled. Could you please assist?

Hello, I am trying to reset my macbook pro to its factory settings but I can't type the name of the formatted disk nor can I click on erase, as this feature is disabled. The 'type name' space and the 'erase' button are in light grey - Could you please assist?

Hello!
Did you boot to the Internet Recovery Partition?
Here’s how:
1/ Make sure your computer is completely shut down.
2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [alt] + [cmd] + [r] Keep these keys on your keyboard pressed until you see a spinning globe with the text “starting Internet Recovery” You might have to connect to your Wi-Fi network before you can continue here.
After a few minutes, you’ll be presented with a Utilities screen. This is the Internet Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
3/ Choose Disk Utility and click [continue]

Repository report don't function - cannot find C:\....\Temp\...file.html

help me

I ran the report using navigator--->repository reports.
This report gets generated as *.html file into your c:\document\username\local\temp folder.
Try running it again and ckeck for the report file name to locate the folder. The file name starts with ck*
Good luck
Shirish Gadkari

Why are my bookmarks not being saved locally if the save to cloud feature is disabled?

Why are my bookmarks not being saved locally on my ipad mini if the save to cloud feature is disabled?

They should be. If you have lost bookmarks try restarting Safari:
1. Press the Home button
2. Double click the Home button to bring up the "Recent Apps" tray.
3. Touch and hold on the Safari icon in the "Recent Apps" tray until a "-" appears.
4. Touch the "-" to terminate Safari.
5. Restart Safari and see if your Bookmarks are back.

Repository reports cannot generate HTML report

Hello
In our Computing Labs, we have Oracle9i Designer installed on Windows XP Professional.
Our students are having a problem when they try to Run Report in Repository Reports.
The student first sees an error message for Internet Explorer that says "Cannot find "file:///c:/docume~1/%username%/LOACLS~1/Temp/ck*.tmp.html". Make sure...". %username% of course being the current user and ck* being the filename of the report.
If the user examines the contents of ~/Local settings/Temp, they will see that when this error message comes up, there is a file ck*.tmp (no HTML extension). The HTML file is never generated though.
When the user click on the OK button for the error message, Internet Explorer open to a blank page. When IE is closed, Repository Reports posts a message that says "CDI-21309: Unable to delete file c:\docume~1\%username%\locals~1\Temp\ck*.tmp.html". When the OK button from this message is clicked the user is returned to Repository Reports, but the report is never generated.
Our users are set up as Dynamic Local Users, and are members of the Power Users group. We do have some pretty tight restrictions on Group Policy.
When a user who is a member of Administrators (also dynamic local user) logs in and attempts to create a report, (s)he has no problem. Repository Reports functions exactly as it should.
I have already given Power Users complete access to all files on the hard drive, so I don't think it could be an NTFS file permission issue.
If anyone has any advice, it is certainly welcome. Our students need to be able to print off these reports for classes, and I am not familiar at all with Designer.
Thank you very much
David Summers
University of Idaho ITS
Student Computing Labs

Here is how I resolved my problem with non admin users not being able to run reports.
Designer 9i ver 9.0.2.80.6
Repository Reports ver 9.0.2.80.4
Problem - When non Administrator users try to generate a report in Repository Reports, they either get a file not found error for the HTML report (and IE will not show the report) or Repository Reports stops responding (and rwrun.exe has to be manually killed).
Fixes
-%TMP% and %TEMP% environment variables must resolve to paths that are fewer than 30 characters. In our environment (WindowsXP with Novell Dynamic Local Users), %TMP% and %TEMP% were the temp folders in the user's profile, which is a long path. Changing the environment variables to point to c:\temp was one step in resolving the issue. Although there is a patch released related to this, my installed version is post-patch and I still had to change the temp environment variables.
-HKLM\SOFTWARE\ORACLE\HOME0\REPORTS_TMP must be set to a writable area for the user group using Designer and Reports. In our environment it was set (during install) to the local administrators temp space (in administrators local profile) - I'd guess it gets set to whatever %TMP% or %TEMP% is for whichever user installs the application. Our users cannot write to this folder, so setting this registry value to c:\temp was another step in resolving the issue.
-c:\OraHome1\reports\logs must be writable for whichever user group is running Reports. Before making this change but after making the previous two changes, reports would simply freeze for Power Users. When trying to log off, rwrun.exe had to be manually killed - and sometimes a Dr Watson report would come up and ask to be sent in. By granting the user group that uses Reports write permissions to this folder (or the equivalent in your environment), Repositry Reports no longer freezes and successfully generates the HTML report.
David Summers
University of Idaho ITS
Student Computing Labs

Sharepoint 2010 Reporting Feature not showing up under "Site Collection Feaure"

Hi
I want to enable "Audit Log" to do this I need "Reporting" feature to be enabled first, which can be located as below located as in below picture.
But I am not able to see "Reporting" feature itself .Can anyone please explain how to add Reporting feature
Thanks,
Meenakshi

Hi
Can you please confirm if you are using SharePoint Foundation or SharePoint Server Enterprise version ?
As with SharePoint Foundation Audit Log is not available, you can check below links -
https://auditlogsp.codeplex.com/ - This post says -
"In Sharepoint 2010 we have a feature called Site Collection Audit and Audit log. But this feature only
on Sharepoint Enterprise, but on the Foundation we dont have that feature. With this application, we can enable audit feature on SP Foundation, see all the log. "
Also check same discussion here -
http://sharepoint.stackexchange.com/questions/13399/how-do-we-activate-auditing-in-sharepoint-foundation-2010
Hope it helps.
Thanks,
Danny
Please remember to mark as answer if it helps.

Steps for Getting Repository Reports to Work in SCM 9024

Have installed Des9i/SCM 9024. With this install, repository reports are not installed without the base release of O9iDS R2. What are the exact steps for getting the Designer Repository Reports to work via the RON in SCM 9024? Basically, I would like to have the Repository Reports option 'enabled' in the RON.
Does 9iDS 902 have to be installed in an Oracle Home first, and then install SCM into the same OH? I would rather not have to install the entire iDS just to be able to have object reporting in SCM.
-- Al

Hello Joe Matheis. Welcome to the Apple Discussions!
Let's double-check your AirPort's configuration for streaming iTunes ...
Either connect to the AX's wireless network or temporarily connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX

Repository Reports feature is disabled

Similar Messages

Maybe you are looking for