Repository Viewing inhibited (local workspace error)

When opening LifeCycle Workbench I encounter the following Exception:
"An error was encountered while trying to reference the local workspace. Repository Viewing inhibited."
Another error that may (or may not) be related occurs when I attempt to drag a pdf resource from Workbench to the desktop (or any folder).
DOWNLOAD FAILURE
"Resource not downloaded due to a failure. Could be permissions, or network connection failure."
This has just started happening.
I have admin rights to my machine.
Nobody else on the temp is having this issue.
Any and all assistance is appreciated.
Also posted under Download failure topic

It worked. Boy that was painless. Thank you very much. My frustration level for the product just went down one (1) notch.
Thanks Again.

Similar Messages

Cannot view PDF forms (with Signature) in Workspace Error : "SigDict/Contents illegal data"

Hello,
With Jasmin's help, I am able to import a PDF form which is digitally signed >> view it in Workspace >> click Approve/Decline for archiving. Thanks Jasmin !
When I view the form in workspace, I get a "Atleast one signature is invalid" prompt on the top left corner of the window. Upon clicking the "Signature Panel", it says "The Signature is invalid" with a description of "SigDict/Contents illegal data"
Once the process is complete, I am unable to open the same form. I get an error message in Adobe Reader (within workspace).
"Adobe Reader could not open '_7358722841708390983-102[1]' because it is either not a supported file type or because the file has been damaged ( for example, it was sent as an email attachments and wasn't correctly decoded)"
Any help will be highly appreciated.
Aditya

For everyone's reference.
I figured out the "Signature is Invalid" message.
This was my fault as I used a Form Augmenter (insert form bridge) to a signed form which broke the PDF.
After removing that module, I no longer got that message. However, once I approve the form I could no loner view it and I would still get an error.
"Adobe Reader could not open '_7358722841708390983-102[1]' because it is either not a supported file type or because the file has been damaged ( for example, it was sent as an email attachments and wasn't correctly decoded)"
Anyone know why ?
Aditya

SSAS loses connection to local workspace

I seem to be running into this quite regularly these days. I'm editing an SSAS tabular model, filtering data in the views in VS 2012 to verify that calculations are working, and I get this:
The result is that any work you've done since you last saved is lost, because you won't be able to save. It's really getting quite frustrating.
I did find a post online that went over how you could recover your work from your local workspace SSAS install by reverse engineering/scripting the cube out of it, but that's really not an option in my case since I'm using source control and can't dump my
project history every time this happens (and it happens multiple times a day now).
Does anyone know of a workaround for this issue before I open a support incident? Thanks.
Edit: Seems that screenshots don't get persisted to the messages in MSDN forums anymore. Here's the text of what would have been in the screenshot:
"cannot complete the operation because there is no connection to the workspace database that contains the model currently being edited"
Specific steps to re-create. Filter any column in the tabular designer, and when you go to clear the filter if you hit clear before the list of available values populates in the box below, it'll lose connection to the workspace server, and everything will
be lost. Any attempt to save will result in:
"Unable to save the file Model.bim. Reason: The file cannot be saved because it is marked as readonly"
Some posted elsewhere about getting past this issue by un-setting the Model.bim file as read-only, or unsetting the entire project directory and it's contents as read-only, but that has not worked on any workstation I have ran into this problem with.
I suspect this is only one of several ways to cause the issue - I know about this one, I try and avoid it, and I still run into problems occasionally.

Hi K Dahl,
According to your decsription, you can't save the bim file and it throw the above error. Right?
In Analysis Services Tabular mode, this error occurs if the tabular designer has lost the connection to the workspace database server at some point during the editing session. However, there is a way to recover the work you did since the last save of the
model. Please refer to a blog below:
Recovering your model when you can’t save the BIM file
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Orcle EPM workspace-error fusion edition and document error.

Hi Experts,
1. We are getting error while opening the workspace
Error:The startup document does not exist in the repository.
but we can access the reports by clicking OK on error button.
Could you please help me out on this anyone.
2. We are getting error while opening the document.
Error: Error occured while opening document. unable to load document.Document no longer exists.
our server is in solaris platform
Thanks in Advance to all experts
9379797

Hello, I had actually not resolved my issue. I was using a Hardware Load Balancer and pointing all apps in HYSL-Weblogic.conf to the HA VIP. If you put all servernames for the WebLogicCluster stanzas as WL_SERVER:WL_PORT,WL_SERVER2:_WLPORT2 format it should fix your issue. Fingers crossed that mine is resolved.
Kstr79

Workspace error message

Hi all,
One of our user got the below error message in workspace as prompt window in workspace while logging in.
The repository object with uuid,00001380481050-0000-fb52uabf930f could not be found,+
The response from the server contained an unexpected content type,+
We have installed and configured Hyperion version 11.1.1.3.
Where could i search for these kind of Oracle EPM System Workspace error as there is no info found in the workspace log directory.
Let me know what was causing this issue and the solution.

You can query the EPM 11 repository DB to find out the object ID (ie. uuid,00001380481050-0000-fb52uabf930f) in V8_Container table. But it usually it's not easily identified what each ID is for, and you might have to join other object table within the repository to figure that out.
My question about your environment: is this a migrated version from v9? I found object to be corrupted during the migration and would become inaccessable in the new environment as a result. Any new object created in the new environment does not run into this type of issue.
I have found Oracle DataModeler (freeware) on the Oracle site that allow me to generate a schematic relational diagram of the EPM 11 repository tables, which is useful sometimes.
Good luck

Workspace error in hfm

hi all
i installed HFM and FDM on one server and Reporting and Analysis and Shared Services on another server. But after the configuration I am able to create application on Win32 client. But when i try to open this application from workspace I get an error which i am specifying below.
Moreover I am not able to view consolidation administration tasks for HFM in workspace. Also when I click on the application name in Shared Services under the HFM project, that gives the error too.
Workspace Error :
Error Code : 2147024891
Error Description : 006~ASP 0178~server.Create Object Access Error ~ The call to server.create object failed while checking permissions. Access is denied to this object.
Error Source : Error Opening Application
Shared Services Error:
Unable to contact the application. Please contact the system administrator.
Can nebody help?

Check the following:
1. The user being used for access in the IIS virtual directory has proper access.
2. The DCOM configuration and Application Cluster configuration are all fine.
3. The DCOM user has proper access
4. The IIS security for the HFM virtual directory is proper.
5. The user being used has proper access in Shared Services.
Regards,
Sayantan
Edited by: sayantan.mondal on Sep 15, 2009 3:31 PM

Entire view-implmentation is showing error.i find my dc component missing.

hai
i was working with a web dynpro development component.suddenly i had error in my imports.i gave project restructure to solve the prob.now my entire view-implmentation is showing error.i find my dc component missing.i have come a long way.should i do everything from scratch or wat?please help me out.i have tried reload,rebuild..regds
sharanya

Hi,
Have you checked in any of the changes done by you, then you can switch to a new workspace and sync to the latest sources.
Else try to close the project, then close and ide reopen the IDE and open project. try a relaod.
Regards
Ayyapparaj

Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1

I have got installed Oracle Apps R 12 on my laptop. The system is running with Windows 2000 server. All went well till the time there were prop.er shusttdown of machine. The ConcMgr service stopped working when the system was turned off due to power down. First time when it happned i could got it work by installing the software agin. However it is become laborious every time to follow the same. Can any one has solution for this issue? I would appriciate your reply.
i spent 4 hrs on web for solution but no luck.
the following is the error
Services
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.
OK
---------------------------

Please run AutoConfig and make sure it completes successfully and try then.
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.Please check the CM log file as well as the event viewer for details about the error.
Thanks,
Hussein

Website project automatically remaps local workspace directories TFS & VS 2013

Hi,
I have some odd behaviour with one of my code projects, a web site project, which has library projects attached to it to form the overall solution. When I imported the solution into TFS, I recreated the folder structure that would normally be created
when you create such a project locally, the library projects being stored with the "Projects" folder along with the solution .sln file and the actual website files (aspx/aspx.cs) stored within the "Websites" folder.
This structure until recently has been working very well, however when I clicked "Get Latest Version" recently, it very successfully decided to delete all my recent work within the "Websites" folder, all the web site front end code.
After some investigation it appears as though through some automatically process that all the websites folder files have been moved into the projects folder. I tried to correct this within the TFS server, which appears to have been successful, however
after resetting my local workspaces and re-downloading the code files and then after opening the .sln file itself -- it then tries to "correct" the structure and moves all the Website folder files back into the projects directory. This behaviour
appears to be specifically related to opening the .sln file rather than grabbing the code from TFS. It also automatically (and repeatedly despite my attempts) creates a new folder mapping within the Workspace to support this new structure.
I've tried working through this, with a number of different methods to try and resolve it, including deleting the project file locally and starting again, the thing is very insistent that it knows best, rather than how I've configured it.
It's rather distressing that as a result of this that I've lost some of my recent work.
Can anybody advise? I've never seen this odd behaviour before from TFS, I did wonder if a recent patch to the TFS may be responsible?
much appreciated,
Regards Phill.

Hi Phill,
Thanks for your post.
You’re using TFS 2013 Update 4 and VS 2013 Update 4?
After you performed Get Latest Version on your solution, all your recent work(web site front end code) be deleted from your Website folder?
Have you checked the Website folder content in your VS>>Source Control Explorer, this same issue also shows in Source Control Explorer or if only happened in your local workspace folder after you performed Get Latest Version on your solution?
If the Website folder structure and content show correctly in Source Control Explorer, please logon another client and reproduce this scenario on in this
another client, check if the latest Website folder shows correctly on that another client’s local workspace folder.
If get latest version works fine on another client, it seems this issue only happened on your client, you can try below two ways to resolve it:
Remove your current Workspace and local workspace folders, then create a new Workspace and mapping in this new Workspace.
Try to clean the cache on your client manually(delete the content of the folder only, not the cache folder itself),
the cache folder path on client is: C:\Users\username(Team Explorer user name)\AppData\Local\Microsoft\Team Foundation\5.0\Cache.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is it possible to create relational view on Analytic Workspace in Oracle 9i Release1

Hi All,
We are in the initial stages of Oracle 9i OLAP prototype. Since the current version of BIBeans 2.5 does not work with Release 2 of Oracle 9i OLAP, we are planning to use Oracle 9i OLAP Release 1. So can you please answer the following questions.
1. Is it possible to create relational view on Analytic Workspace(like in Release 2) and populate the OLAP catalog, if so can you give me guidance to get the appropriate user guide. The OLAP DML guide in Release 1 talks about creating OLAP catalog metadata for Analytic Workspace using a metadata locator object.
2, Is it advisable to use Oralce 9i OLAP Release 1? Does the Analytic Workspace and the corresponding BIBeans work in Release 1?
Thank you,
Senthil

Analytic Workspaces (Express/multidimensional data objects and procedures written in
the OLAP DML) are new to Oracle9i OLAP Release 2, you cannot find them in Release 1.
BI Beans will soon (within a week) introduce a version on OTN that will work with Oracle9i OLAP Release 2.

How to create a help view for a customized error message

Hi all,
Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
Thanks very much!
Bruce, Wen

Hi Bruce,
Could you brief your concerns again.
Why don't you maintain long text in message class for long description.
Regards,
Ranjith N

Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support

Hyperion Workspace error ,while using weblogic as application server.

Hi Experts !
I have Hyperion 9.3.0 environment and
I m using web logic 8.1 and facing problem in starting workspace .
configuration with weblogic is successful but still error while open workspace :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Please help me..
Thank you

Hello,
Were you able to find any solutions to this problem. We are experiencing the same issue now.
Thanks
Srikanth

KM links not functioning through Webdav repository view

Hi All,
I have a somewhat complicated setup here which is causing some strange issues.
We have an EP instance and a BI portal instance setup. Currently we broadcast reports to our BI portal KM instance, and use ICE to replicate the data from BI portal KM to EP KM. This is not the desired end result.
According to SAP, the end result should consist of using a Webdav repository solution. When users hit the EP KM, specifically the content that is being replicated over currently, they would hit a Webdav repository which points to the BI portal KM, which has an identical KM folder structure. So far this works fine. The problem happens when we create links within the BI portal KM.
Near the root of the KM structure, we have the main content. We link back to this main content with different permissions on each link. This is done for business reasons.
When I try to access this linked content from the BI portal KM it works fine. From the EP KM it throws a HTTP 403 not authorized error. I have tried opening up the permissions to everyone on both KM's with no success. When I access the content directly (ie not linked) it works fine (same permissions). Any ideas why the linked content through a webdav repository would throw HTTP 403 errors?
Kind Regards,
Richard
Edit: I should add that we are currently using EP 7.0 EHP1 SP3 highest current patch level and BI 7.0 EHP1 SP3 highest current patch level.
Edited by: Richard de Gonzague on May 5, 2009 4:33 PM

Hi,
I have a similar requirement where in we need to integrate CRM Content Management with SAP KM.Can you please let me know -
1. How do I connect it using the Web Dav repository manager. Can you point me to the document.
2. If you were to resolve the error that is mentioned below. I will have a similar requirement once the WebDav repository manager is configured.
Thanks,
Vivek

10gLiteR3 publishing ORA-00942: table or view does not exist error

Hi All,
I am encountering table or view does not exist error while publishing using the api.
Below is the code:
try {
consolidatorManager.openConnection("MOBILEADMIN","PASSWORD", ADMIN_JDBC_URL);
mobileResourceManager = new MobileResourceManager("MOBILEADMIN","PASSWORD",ADMIN_JDBC_URL);
consolidatorManager.createPublicationItem(EXT_CONN, "RMT_TEST_TABLE" , "MOBILEADMIN","RMT_TEST_TABLE", "F", "SELECT * FROM MOBILEADMIN.RMT_TEST_TABLE", null, null);
consolidatorManager.addPublicationItem(mobileResourceManager.getPublication("/mobileApp"),"RMT_TEST_TABLE",null, null, "S", null, null);
} catch (Exception e) {
e.printStackTrace();
When I execute the above code it does not throw any exceptions but I see the below error in err.log. I,U,D triggers are getting created on the remote table, CMP, CFM, CVR,CLG tables are also created, I also see primary key for this table in VPKS. Publishing seems to be fine but I see the below error in err.log.
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:651)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2117)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2331)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:366)
     at oracle.lite.sync.Subscription.getVirtualTablePrimaryKey(Subscription.java:7522)
     at oracle.lite.sync.Subscription.getTablePrimaryKey(Subscription.java:7365)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2334)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2157)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2129)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2108)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2093)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2079)
     at oracle.lite.sync.ConsolidatorManager.createPublicationItem(ConsolidatorManager.java:1253)
I am not able to figure out what table it is looking for. Any ideas why this is happening?

check the MGP compose process, is it also showing the error?
If it is them at some point in 10.2 Oracle introduced a 'feature' (ie: bug) that causes problems to the housekeeping routines when new versions of publication items are published
In 10.0 and early 10.2 when making changes to publication items VIEWS called CPV$.. were created to log the column list for each version of a publication item, and check if you are making changes when you publish. In the case of old versions, once all clients have synchronised and been moved to the latest version it tries to delete this view.
at some point the publish started creating TABLES instead of views (but using the same naming convention ie: CPV$..). This works fine as far as the logging of changes and old column lists, but the housekeeping called at the end of the publish and GP process still trieds to do a DROP VIEW and this causes the error.
The only way of clearing this i have found is to look at the log file to get the name of the object that it is trying to drop, set up a view script to create a dummy view with the list of columns in the table, drop the table and then create the view. It then gets dropped on the next MGP cycle and the error goes away
If the error is not showing up in the MGP process, only in the publish, and your changes appear to be publishing OK, then the problem is likely to be with a snapshot definition AFTER the change you have made - real pain to identify on re-publish - possibly missing schema name in the snapshot definition

Repository Viewing inhibited (local workspace error)

Similar Messages

Maybe you are looking for