Repository with software worked on v4 firmware

Here is my repo with software, worked on official firmware v4:Connect via SSH and run this command:echo "deb http://anionix.ddns.net wheezy-64k main" > /etc/apt/sources.listThen - you can run apt-get update and install software.Also available "SID" repo!If you need Chroot: Download chroot installer. WARNING: This software only for official v4 firmware (Kernel/Software with PageSize=64k)!I dont change any source code. But if you dont trust me - just dont use it  Current software list (Browse full list of packages)Transmission-daemon (+2.84 from SID)MC (Midnight Commander)MiniDLNA (+1.1.2 from SID)Openssh-server + clientSamba v3.6.6rSync (+ SID)pyLoad (Download manager)Aria2PythonPerlCorosyncApache2PHP5 (Curl, GD, MCrypt)MySQL 5.5 Server & ClientffmpegPacemakerHTopLocalesBuild-essential && Patched binutilsBase system & all base tools (For make chroot or build system from scratch)And more (See full list at end of this post)If you want another software - just ask me here.But dont ask me add software not included in official debian repository! 

Hi again, I was trying your repository, but I cannot install transmission-daemon.This is what I'm doing: WDMyCloud:~# cp /etc/apt/sources.list /etc/apt/sources.list.bak
WDMyCloud:~# echo deb http://anionix.ddns.net wheezy-64k main > /etc/apt/sources.list
WDMyCloud:~# apt-get update
Ign http://anionix.ddns.net wheezy-64k Release.gpg
Ign http://anionix.ddns.net wheezy-64k Release
Get:1 http://anionix.ddns.net wheezy-64k/main armhf Packages [10.4 kB]
Ign http://anionix.ddns.net wheezy-64k/main Translation-en
Fetched 10.4 kB in 3s (2607 B/s)
Reading package lists... Done
WDMyCloud:~# apt-get install transmission-daemon
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
transmission-daemon : Depends: libcurl3-gnutls (>= 7.16.2) but it is not installable
Depends: libnatpmp1 but it is not installable
Recommends: transmission-cli (>= 1.50-1) but it is not going to be installed
E: Unable to correct problems, you have held broken packages. Can you help me? What am I doing wrong?Thanks in advance  

Similar Messages

  • Zenprise software and exchange active sync is no longer working with my work email

    Has anyone resolved this issue yet?  I use Zenprise to allow my email to communicate with my work server.  The account and set up is correctly and I reenrolled to ping the server. I discussed this with my company's support center.  However, my company no longer see's my phone trying to communicate with the server. I also use active sync to sync up the email.  Both are not working and did work fine before the ICS upgrade.  I did everything verizon told me to do.  Such as clear out cache, etc. 
    If my phone can not be fixed, I should receive a free upgrade to apple (since android is not working).  I should not have to pay for a new phone.  Verizon, please fix the software or send me a new apple phone.

    Hello all - I have good and bad news.   The good news is after I deleted both my unique Office365-based exchange accounts and then re-added one, I was asked to allow some policy that allows my company to wipe the device, etc., etc.   That allowed the first one to work, and the second one set up without issue too.   I'm most pleased to have my device working, but my 'fix' isn't too revolutionary so probably not very helpful to you.   I did try the Touchdown app for a bit the other day, but was disappointed that it could only do one account at a time and didn't have the comprehensive cross-account calendar, from what I could tell.  Also, my apologies for possibly polluting the thread but I do not use Zenprise; my phone (although company-issued) is a base Android.  Good luck with your issues and let's hope any other OS upgrade is far, far into the future.

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • Can PC software work on the iMac G5 with Intel?

    Can PC software work with the iMac G5 with Intel processor? I need to know! And also, is there a new apple computer coming out next year (2007) that will be able to run PC software? I am mainly asking because I want to know if I will be able to run PC games on iMac G5 with Intel or the new computer coming out in 2007. I need to know!
    iMac G5   Mac OS X (10.4.6)  
    iMac G5 Intel Processor   Mac OS X (10.4.6)  

    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
    Here is a link;
    Forum: Boot Camp Public Beta
    Panther was the version of Mac OS X before the current version, Tiger. Apple Computer does not release information in advance of its introductions of new hardware/software and the rules of the Apple Disussions forbid "speculation." Boot Canp is Beta because it is not yet a permanent part of Mac OS X. It works fine. It does not require constant updates. It comes with instructions for its own installation as well for Windows XP SP2. You have to purchase Windows from Microsoft. Folks report that games run fine and that Windows runs better on their Macs than it ever did on their PCs!
    Visit the Boot Camp forum at the above link for further info.

  • I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia.  Yesterday I updated with IOS 5.0.1.  Now it is showing that sim is not valid.  The same sim works in other p

    I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia.  Yesterday I updated with IOS 5.0.1.  Now it is showing that sim is not valid.  The same sim works fine in other phones.

    Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
    This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
    Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
    And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If  i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this:

  • What software works with the old 7290

    I just want to move pictures and ringtones back and forth from my computer to my old 7290 and for the life of me I can't figure out which software works with this old model. I have tried several of the newer applications offered by RIM but none of them weem to work with this older model. Any ideas?

    You should be able to 'see' the BlackBerry memory in the Meida Manager, and you can transfer small files to the Content Store on the BlackBerry using the Media Manager. Just remember that you are using the base memory on the BlackBerry for media files and you shouldn't get too crazy with files transferred to it. 
    Try installing v4.2 Service Pack 2 and using the Media Manager and seeing if the BlackBerry device memory option shows up at the bottom of the screen. When you open the memory you should see some file folders and you should store the files directly into the file folder appropriate to the media, and not use folders inside the original folder so the BB will 'see' the files when you use your Profile options to select ringtones or background photos.   

  • Howto work on ONE repository  with multi-user

    hi guyz, im new in using warehouse builder. i got a problem in using a single repository (with one target database and one source) which is used by multiple user to design a lot of dimensions n cubes.
    is it possible 2 do it? if yes, how? cuz my frenz and i were trying 2 design and then deployed / saved the dimensions n cubes simultaneously but it juz ended with data lost (dimensions and cubes dat already made). is there any solution 4 it???
    thx guyz...

    Firstly, you should set up an OWB user for each user if you haven't already done so rather than use a shared user id.
    Secondly, you should make one person responsible for controlling the changes to the dimensions/cubes and allocating who will make the changes, when they will be made and when they will be deployed. You need control within your project/data warehouse team, you can't expect OWB to do this part for you.
    You may also want to have separate OWB projects to split the work up a bit but this can add additional complications with e.g. process flows.
    Lastly, you may also want to consider separate projects per environment e.g. DEV, QA, LIVE.
    Si

  • ODI-10150: Work repository with ID 7 is not bound to master

    Hi all,
    I am upgrading from 10g to 111.1.1.6 and getting the below error, can any say how to bound this work repository to the master repository.
    [2012-10-01T11:44:14.626-05:00] [eclipse] [NOTIFICATION] [org.eclipse.persistence.default] master-session logout successful
    [2012-10-01T11:44:14.897-05:00] [ODI] [INCIDENT_ERROR] [upgrade.ODI] [[--------- ODIPlugin.doUpgrade called]]
    [2012-10-01T11:44:14.897-05:00] [ODI] [INCIDENT_ERROR] [upgrade.ODI] [[
    oracle.odi.core.config.RepositoriesNotBoundException: ODI-10150: Work repository with ID 7 is not bound to master:
         Definition in master ID:800, Name:ODI_WORK_DEV, Timestamp:1321921754567
         Definition in work ID:1, Name:ODI_WORK, Timestamp:1181331962726.
         at oracle.odi.core.repository.support.RepositoryUtils.assertRepositoryBinding(RepositoryUtils.java:430)
         at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:228)
         at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:504)
         at oracle.odi.core.OdiInstance.<init>(OdiInstance.java:581)
         at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:521)
         at oracle.ias.mrua.plugin.odi.ODIPlugin.doUpgrade(ODIPlugin.java:611)
         at oracle.ias.mrua.MRUA.executePlugins(MRUA.java:3576)
         at oracle.ias.mrua.MRUA.internal_driver(MRUA.java:2357)
         at oracle.ias.mrua.MRUA.driver(MRUA.java:1621)
         at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:390)
    [2012-10-01T11:44:14.902-05:00] [ODI] [NOTIFICATION] [upgrade.ODI] --------- ODIPlugin.doUpgrade finished[[]]

    Hi,
    It should not really create any problem , if you create a two work repositories with differenct IDs. But, the error messae you gave suggests , it is something to do with repository IDs. Usually, we get this message , when we try to migrate ODI code within enviroments. However, it does not throw as an error message, it just gives as an information and asks us if we want to register the new work repository ID. We just need to say Yes and continue.
    I would suggest to redo everything, recreate repositories again. May be something went wrong while creating repositories.
    Regards,
    k

  • ODI-10150: Work repository with ID 1 is not bound to master

    Hello,
    ODI 11g (11.1.1) with database 11g r2
    I have created Master repository (odimrep) and
    work repository(odiwrep), created from Topology
    Before the next step, during this time I was able to login to connect to work repository and able to do all work
    Then I went on to created Execution repository (odierep) from topology, created successfully.
    After that I could not able to connect to work repository, as I am getting the following error message
    oracle.odi.core.config.RepositoriesNotBoundException: ODI-10150: Work repository with ID 1 is not bound to master:
         Definition in master ID:1, Name:ODIWREP, Timestamp:1337006142714
         Definition in work  ID:2, Name:ODIEREP, Timestamp:1337006565503.
    .....Could you please let me know what I am doing wrong to configure the Execution repository, do I need to drop everything and start re-create
    Any help would be greatly appreciated.
    Thanks,

    Hi,
    It should not really create any problem , if you create a two work repositories with differenct IDs. But, the error messae you gave suggests , it is something to do with repository IDs. Usually, we get this message , when we try to migrate ODI code within enviroments. However, it does not throw as an error message, it just gives as an information and asks us if we want to register the new work repository ID. We just need to say Yes and continue.
    I would suggest to redo everything, recreate repositories again. May be something went wrong while creating repositories.
    Regards,
    k

  • RAW files from my Nikon Df (NEF) will not display in Lightroom. Same format from Nikon D300s works. Camera firmware is current. Df RAW (NEF) files display in Nikon software products, not in Apple software (Aperture or iPhoto).

    RAW files from my Nikon Df (NEF) will not display in Lightroom. Same format from Nikon D300s works. Camera firmware is current. Df RAW (NEF) files display in Nikon software products, not in Apple software (Aperture or iPhoto).

    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    The above list show the current camera models supported by Adobe Camera Raw (plugin for PS CC) and Lightroom 5.3.
    You will see that the Df Raw support was provided in the latest version of LR 5.3.   Support for the D300s was introduced in LR 2.5. (the NEF files are different.)
    Lightroom and Adobe Camera Raw can only be updated after the camera manufacturer has produced the camera and made it publicly available. If you are using an earlier version of Lightroom then that is your problem.
    Please post details of the version you are using at present.

  • HT3819 I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

    I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

    I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

  • I m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    i m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    tom i have been using ubuntu for c++ project
    i use lambda and atomic (c++0x) but now as I am working on MAC not able to use them
    installed xcode(4.3) and changed compiler settings to LLVM3.1 but still both features are not available
    to compile wanted to have g++ which supports c++0x features ...
    new to MAC (2-3 days) so was in rush to solution
    let me know if you have some suggestion ...
    else will try with eclipse cdt .... 

  • Software works with iplanet and Solaris

    Hi,
    I'm interested in a software working like CrystalReport. The software has to work with iplanet and Solaris. I use jsp as GUI front to report.
    A appreciate you if you can suggest a product.
    Thanks.
    Jerry

    I don't use Quicken, but believe there is now a version that is compatible with Lion.

  • Do firmware updates come with Software Update and installed automatically?

    Do firmware updates come with Software Update and installed automatically?

    Do firmware updates come with Software Update
    Yes.
    and installed automatically?
    No (at least, I can't think of one that has automatically run). Usually Software Update will download an updater that you then need to run separately. Usually the updaters will be installed to the Utilities folder ready for you to use.

  • Which PC is recommended by Microsoft that ACTUALLY meet the requirements to work with software development for kinect for windows?

    My PC serves the minimum requirements described in the kinect page, but when installing the device, the software says that the computer does not meet the minimum requirements and therefore will not work with efficiency. Alternatively, theorize buy a new
    computer.
    Which PC is recommended by Microsoft that ACTUALLY meet the requirements to work with software development for kinect for windows?

    Getting a definitive answer from Microsoft will be difficult as to my understanding, requirements are still subject to change; and unless it's their brand of PC  I doubt they will give free advertisement to buy a specific make/model.
    There are other threads where people discuss specific machines that work with the Kinect V2.  
    The only compatibility problems I've had with getting it to work are: It has to be run Windows 8; It has to have a compatible USB 3.0;  The 'Compatible' USB 3.0 requirement seems to be the most difficult.

Maybe you are looking for