Repost: Failure trying to install Collection Server

Hi Guys and Gals,
Reposting from another forum in the hope that maybe somebody can point me in the right direction.
I am rying to Install ZAM 7.5 Collection Server on a new server in our DMZ. This is to replace the existing collection server alread located in our DMZ.
Have configured Oracle to talk to the Oracle DB on the ZAM Primary Management Server and it all works and TNSPing, etc confirms that there is connectivity.
However when trying to install the Collection Server and pointing it to my Oracle DB instance (zamdb) ... I get this error message
"Unknown Class Key - FATAL ! Persistence Layer detected an incompatibility between Objects and Schema!"
I can't seem to find out what the cause is or how to resolve it. Google has not helped, neither has the Novell KB.
I have a few suspects
1) The Oracle instance installed on New Collection Server is 10.2.0.3 whereas the current collection server and ZAM Parent Server is 10.2.0.1. However the the collection server just uses oracle for ODBC since no database is configured/installed on both the original collection server and the new collection server.
2) The Management Server has been upgraded to "7.50.0074 Interim Release 22". I think the issue here is that the installer that I am using is the from the original ZAM7.5 CD, but that since the primary server has been upgraded, something in the database doesn't match what the installer is looking for, hence the error.
If I know what to change in the database to allow installation, that would get me on my way, and then I can change it back.
Anybody have a clue as to what the error message means?
Thanks in Advance..

za,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Blue screen error while trying to install windows server 2003 in Lenovo G500s essentials Notebook

Hi,
I bought a new lenovo G500s essentials note book. It's a freedos system. I am trying to install windows server 2003 in it. But I am getting blue screen error . error message like ths,
Technical Information:
STOP: 0*0000007B (0*FFFFFADF2CE323C0, 0*FFFFFFFFC0000034, 0*0000000000000000, 0*0000000000000000)
Can someone please help.
Regards,
Priya.
Solved!
Go to Solution.

I don't have a similar machine to look at so this is a bit of a guess:
Per page 30 or your user's guide http://download.lenovo.com/consumer/mobiles_pub/lenovo_g400sg400stouchg500sg500stouchg405sg505s_ug_e...:
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup
There should be a tab labelled something like "Configuration" and on that page something like "SATA controller mode". Select "compatible" and save and exit.
I'm not certain this will fix your problem, but it's worth a try.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Error: 0x800f0922 when trying to install NFS Server Feature on Windows 2012R2

I'm trying to install the "Server for NFS" option under the File and Storage Services role on a Windows 2012R2 server, but I keep receiving an 0x800f0922 error. I've tried the install via the GUI and Powershell. I've also tried using the
DISM utility with different source media for the install, but with the same result.   I ran "SFC /scannow" to check for any missing files/reg keys but it returned no errors. Any thoughts?

Thank you for the help! I did try the suggested steps, but the issue persisted. I was able to resolve the issue by removing software on the server that was using the NFS ports needed for successful installation of the native NFS server.
In our case it was an optional component of our backup software called"Veeam backup vPower NFS".   There is also a known issue with the Qlogic's SanSurfer software using the NFS ports.
There were entries in the System event log that tipped me off:
Event ID: 7000  The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
A device attached to the system is not functioning.
Event ID: 7001  The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to
start because of the following error:

Trying to install Leopard server on my Mac mini

I'm a registered Apple Select Developer and I'm trying to install Leopard Server on a Mac mini I just picked up the other day. Is there a way to do this using the image or do I have to burn a DVD in order to do the install? The image is over 5GB's so I'd need to get a dual layer disk.

Is this just for a test?
If so you can create 3 partitions, one a bootable volume the second partition a place to restore the Leopard image and the third partition to install the new software you restored on the second partition. You do loose two small volumes temporarily, but you can make them relatively small since these are only used for installation purposes. The details can be found on the developer site under " leopardclient_9a377a_seednote.rtf".
I've done this on older machines with no CD players installed.
-Den

When am trying to install Windows server 2008 OS. Error msg was coming 0x80070070:"not having enough space for installation"..Even though i have 20GB space?..Pls resolve this issue earliest.

Hi Guys
I have an issue please help on that earliest.
When am trying to install Windows server 2008 OS. Error msg was coming 0x80070070:"not having enough space for installation"..Even though i have 20GB space?..Pls resolve this issue immediately.
Regards,
Shiv

Is this a clean install or an upgrade? 20 GB, though greater than the minimum, is pretty minimal. How much memory do you have on the system? 2008 would try to create a page file of 1.5x physical memory, so if you are building on a large
memory system, you could be having an issue there.
"Pls resolve this issue immediately"
Forums are not for support. They are monitored by people, like yourself, who are willing to take time out of their days to provide the benefit of their past experience. If you need support, you need to purchase a support contract from Microsoft
or some other party.
. : | : . : | : . tim

Network Connection error when Trying to Install Windows Server 2012 R2 Essentials

Thank you to anyone who can help me out here. I have a brand new machine with known working wifi and wired ethernet adapters (works under Windows 8.1) I am attempting to install Windows Server 2012 Essentials R2. During the install process, the system connects
to the internet to download updates to help along the install. No problem here. Further down the road after restarting several times and now during the "Configuring Windows Server Essentials" step of the install, I am told "There is no network
connection. Please fix the connection issue and try again."
When troubleshooting the connection, I am told that the wifi adapter drivers may not be installed. I have a wireless card in the machine and have also tried disabling the wifi adapter and have been connected successfully via the ethernet port this whole
time.
Help, I'm stuck and have been to this point in the install 4-5 times already.
Thank you.

Is this a laptop? Can you remove the wifi? Disable it in BIOS?
Does the wifi have an IP and internet when it throws the error?
BTW, when the wizard ask about updates say no. Takes way too long and does not help anything
Change the binding order and put the wired on top.
The Steps?
Just open your Network and Sharing Center. (Change adapter settings)
Press an ALTkey on your keyboard to show the menu bar.
Click on the Advancedmenu
choose Advanced Settings option
Adjust your binding order for your NICs to ensure your wired ones are at the TOP
http://regularitguy.com/2012/12/06/how-to-change-nic-binding-order-in-windows-8-and-windows-server-2012/
Grey

Trying to install VM Server and not getting the CD found screen to display

Trying to install Oracle VM Server from a CDROM:
1.     Insert the Oracle VM Server CDROM into your CDROM drive.
2.     Boot the computer with the Oracle VM Server CDROM.
3.     The Oracle VM Server screen is displayed.
All that went fine but not getting the CD found screen to display. Instead it says the device wasn't found and shows a list of drivers, none of which seem to match the CD drive. Anyone have any ideas? There is an option to point it to a driver disk, not sure if I need to get the driver from somewhere and do that or not?
machine is Dell Optiplex 760
CD RW\DVD RW drive

Try changing the SATA mode in the BIOS to AHCI.

Trying to install Exchange Server 2013 and receive this error.

Hello,
I have a computer running Windows Server 2012 R2 Standard. I have completed all the prerequisites to install Exchange Server 2013. It all was going good until the install started. Then I received the below error. Does anyone have any suggestions? I am new
to Exchange Server so would thank and appreciate any help I could get to resolve this issue.
Thank You,
Stan
Error:
The following error was generated when "$error.Clear();
initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions
" was run: "Microsoft.Exchange.Management.Tasks.InvalidWKObjectException: The well-known object entry B:32:A7D2016C83F003458132789EEB127B84:CN=Exchange Servers\0ADEL:16cd035a-6201-492f-b85f-1e28cc9f9ee0,CN=Deleted Objects,DC=MULTIAXCNC,DC=local on
the otherWellKnownObjects attribute in the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=MULTIAXCNC,DC=local points to an invalid DN or a deleted object. Remove the entry, and then rerun the task.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription, GroupTypeFlags groupType, Boolean createAsRoleGroup)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

Here is the error I am getting and the last setup log I can find. Any help how to get past the error would be helpful.
Thank You,
Stan
Error
The following error was generated when "$error.Clear();
          Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController
        " was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.AddAccessRuleCryptographicException: Could not grant Network Service access to the certificate with thumbprint 845C42A131A8A73487400A91491182FB95B81612
because a cryptographic exception was thrown. ---> System.Security.Cryptography.CryptographicException: Access is denied.
   at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.CAPIAddAccessRule(X509Certificate2 certificate, AccessRule rule)
   at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.AddAccessRule(X509Certificate2 certificate, AccessRule rule)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.ManageExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services, String websiteName, Boolean requireSsl, ITopologyConfigurationSession dataSession, Server server,
List`1 warningList, Boolean allowConfirmation, Boolean forceNetworkService)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.EnableForServices(X509Certificate2 cert, AllowedServices services)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.InstallExchangeCertificate.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Setup Log Below
# Default Install steps for ClientAccessRole.
# Programmatically generated on 7/5/2014 10:58:24 PM.
# Variable Declarations
$RoleAllRoles = 'BridgeheadRole,GatewayRole,ClientAccessRole,MailboxRole,UnifiedMessagingRole,FrontendTransportRole,AdminToolsRole,MonitoringRole,CentralAdminRole,CentralAdminDatabaseRole,CentralAdminFrontEndRole,LanguagePacksRole,CafeRole,FfoWebServiceRole,OSPRole'
$RoleBinPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Bin'
$RoleCustomerFeedbackEnabled = $True
$RoleDatacenterPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Datacenter'
$RoleDatacenterServiceEndpointABCHContactService = '<ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointDomainPartnerManageDelegation2 = '<ServiceEndpoint><Url>https://domains.live.com/service/managedelegation2.asmx</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveFederationMetadata = '<ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveGetUserRealm = '<ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointLiveServiceLogin2 = '<ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>'
$RoleDatacenterServiceEndpointMsoFederationMetadata = '<ServiceEndpoint><Url>https://nexus.microsoftonline-p.com/FederationMetadata/2006-12/FederationMetadata.xml</Url></ServiceEndpoint>'
$RoleDomainController = 'MULTIAX2012.MULTIAXCNC.local'
$RoleExternalCASServerDomain = $null
$RoleFqdnOrName = 'MULTIAX2012.MULTIAXCNC.local'
$RoleInstallationMode = 'Install'
$RoleInstallPath = 'C:\Program Files\Microsoft\Exchange Server\V15\'
$RoleInvocationID = '20140705-2258240578829153548'
$RoleIsAdminToolsRoleInstalled = $True
$RoleIsBridgeheadRoleInstalled = $True
$RoleIsDatacenter = $False
$RoleIsDatacenterDedicated = $False
$RoleIsFfo = $False
$RoleIsPartnerHosted = $False
$RoleLanguagePacksPath = 'C:\Exchange\'
$RoleLoggedOnUser = 'MULTIAXCNC\Administrator'
$RoleLoggingPath = 'C:\Program Files\Microsoft\Exchange Server\V15\Logging'
$RoleNetBIOSName = 'MULTIAX2012'
$RoleNoSelfSignedCertificates = $False
$RolePreviousVersion = $null
$RoleProductPlatform = 'amd64'
$RoleRoleName = 'ClientAccessRole'
$RoleRoles = 'BridgeheadRole,AdminToolsRole'
$RoleSetupLoggingPath = 'C:\ExchangeSetupLogs'
$RoleTargetVersion = '15.00.0913.022'
$RoleUpdatesDir = $null
# Component tasks
# Tasks for 'All Roles Common First' component
# [ID = AllRolesCommonFirst___3e69ba31a53e4c29a2d6bffcf78cc614, Wt = 5, isFatal = True] "Starting the WMI service."
7/5/2014 10:58:24 PM:
          if (Get-Service winmgmt* | ?{ $_.Name -ieq "winmgmt" })
            Set-Service winmgmt -StartupType Automatic
            Start-SetupService -ServiceName winmgmt
# [ID = AllRolesCommonFirst___56139ce4432346ecb7936afae4c3a9cc, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
          & $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoleName.Replace('Role','')
# [ID = AllRolesCommonFirst___edc23bc11a4e4119a6a4ee802ff1ea49, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:24 PM:
          if ($RoleRoles)
            & $RoleBinPath\ServiceControl.ps1 EnableServices $RoleRoles.Replace('Role','').Split(',')
# [ID = AllRolesCommonFirst___62f13a063b2846a5ab20765bb7a3fc51, Wt = 5, isFatal = True] "Starting the Remote Registry service."
7/5/2014 10:58:25 PM:Start-SetupService -ServiceName RemoteRegistry
# [ID = AllRolesCommonFirst___00573a17b6e34c26842a6646830d57fa, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:58:25 PM:Set-LocalPermissions
# [ID = AllRolesCommonFirst___77668249568048d3812fb7cdba08c58b, Wt = 1, isFatal = False] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
          $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF");
          $mflFilePath = ($RoleInstallPath + "bin\en\Exchange.MFL");
          compile-moffile -MofFilePath:$mofFilePath;
          compile-moffile -MofFilePath:$mflFilePath;
# [ID = AllRolesCommonFirst___f557448f44964e5eaa5dba792a3c4f09, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCByPortRule)
# [ID = AllRolesCommonFirst___84a0f0e2c2f44db2b537e9696c26fc3e, Wt = 1, isFatal = True] "Creating the Exchange server configuration object in Active Directory."
7/5/2014 10:59:35 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeRPCEPMapByPortRule)
# Tasks for 'ClientAccess Permissions Configuration' component
# [ID = ClientAccessLocalPermissionsComponent___6246589bb8494a3580c22c26e18451d1, Wt = 1, isFatal = True] "Setting folder or registry permissions for the Mailbox role: Client Access service. "
7/5/2014 10:59:35 PM:Set-LocalPermissions -Feature:"ClientAccess"
# Tasks for 'Exchange 2003 Registry Configuration' component
# [ID = LegacyRegistryMarkersComponent___7d6dadc1069b42ac93eadd1143c04a1a, Wt = 1, isFatal = True] "Installing/Removing registry values used by Exchange 2003 components"
7/5/2014 11:00:01 PM:set-ExsetdataRegistryMarkers
# Tasks for 'Client Access Perf Counters' component
# [ID = ClientAccessPerfCountersComponent___deb99c54869843b68426390615283ab7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:01 PM:new-PerfCounters -DefinitionFileName OwaInstallSingleCounters.xml
# [ID = ClientAccessPerfCountersComponent___ca78563ec1f1468982d1a2e59c6001bd, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:15 PM:new-PerfCounters -DefinitionFileName EcpPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69a559428fb42029ca3261e795b216d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:21 PM:new-PerfCounters -DefinitionFileName RwsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___c335490f948a4b16b5e2d2ce5f1eb9e7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:26 PM:new-PerfCounters -DefinitionFileName InfoworkerAvailabilityPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5af856aa00ae485ca206c5cdd13e9128, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:31 PM:new-PerfCounters -DefinitionFileName InfoworkerSharingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___86121d1b951e43fb934f1f1d573362eb, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:35 PM:new-PerfCounters -DefinitionFileName ThrottlingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___ea5896b92c494834b1a93c4620fcaef4, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:42 PM:new-PerfCounters -DefinitionFileName MiddleTierStoragePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___dab6f03bdf5141efb7b017c3009fb9e6, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:48 PM:new-PerfCounters -DefinitionFileName ActiveManagerClientPerfmon.xml
# [ID = ClientAccessPerfCountersComponent___5471455db0ef4610bf68fe7ad9417e19, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:53 PM:new-PerfCounters -DefinitionFileName RmsPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___81ad52cb2950483196b52371b4d992c8, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:00:58 PM:new-PerfCounters -DefinitionFileName InfoworkerMailTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___072bf6737f1c42a0a8847ce35cf8a0c7, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:03 PM:new-PerfCounters -DefinitionFileName InfoworkerUserPhotosPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___50b64611f7444bb49d50e00c206d2c13, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:08 PM:new-PerfCounters -DefinitionFileName AirSyncCounters.xml
# [ID = ClientAccessPerfCountersComponent___f2620ff8c3754396a8ea7d77257e2895, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:14 PM:new-PerfCounters -DefinitionFileName ClientAccessRulesPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4ef0f16c017840a583ace9f062300207, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:19 PM:new-PerfCounters -DefinitionFileName Imap4Counters.xml
# [ID = ClientAccessPerfCountersComponent___135fb06dadd9403a83ceebb290638efe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:24 PM:new-PerfCounters -DefinitionFileName Pop3Counters.xml
# [ID = ClientAccessPerfCountersComponent___312e8d44e92b45e0809f9d3d5dc2cfc0, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:29 PM:new-PerfCounters -DefinitionFileName WsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3c333497697041cb854190ec31c17b18, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:48 PM:new-PerfCounters -DefinitionFileName UMClientAccessCounters.xml
# [ID = ClientAccessPerfCountersComponent___ba015b97cc0b4beba7b25b6cb297fcac, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:54 PM:new-PerfCounters -DefinitionFileName AutodiscoverPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___3daffea50d5a4318aab4aa737e508146, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:01:59 PM:new-PerfCounters -DefinitionFileName OAuthCounters.xml
# [ID = ClientAccessPerfCountersComponent___c71073d7f1ab4c119af83efb513b3a9d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:04 PM:new-PerfCounters -DefinitionFileName InfoWorkerMessageTrackingPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___abdaf0bf21f4473b88819ee85cada219, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:10 PM:new-PerfCounters -DefinitionFileName RpcClientAccessPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___9f160f3e42984edfa25b62424ebc05b5, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName RpcClientAccessServerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___e55cb179521a4dacbeaa588c6948cf14, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:15 PM:new-PerfCounters -DefinitionFileName AddressBookServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___064a7856cf7c4b0399c85cf4f3bc2f1c, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:20 PM:new-PerfCounters -DefinitionFileName RpcEntryPointsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___42325F33-A961-41FE-B6B5-5CFB3AA9820A, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:22 PM:new-PerfCounters -DefinitionFileName MapiHttpEmsmdbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___4C04D747-3B5C-400A-980F-45504324EF42, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:28 PM:new-PerfCounters -DefinitionFileName MapiHttpNspiPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___5ab36fffacd04975bb1bc681a214bf71, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:33 PM:new-PerfCounters -DefinitionFileName ThrottlingServiceClientPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6ca23933132d44b39d6586cb3f9f8f21, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:39 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___6602c41b35254405bed412fab7d527fe, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:44 PM:new-PerfCounters -DefinitionFileName MSExchMailboxReplicationServicePerMdbPerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___74e45a45ea8c449092a10929ae24ba4b, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:50 PM:new-PerfCounters -DefinitionFileName MlbPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___a3bcb686add64cf296c8616d387d0323, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:02:55 PM:new-PerfCounters -DefinitionFileName MlbMultiInstancePerformanceCounters.xml -FileMappingSize 2097152
# [ID = ClientAccessPerfCountersComponent___c00c15c4ef6f479b9f5deb852d8eda7d, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:01 PM:new-PerfCounters -DefinitionFileName ProvisioningPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___fe1a2a7c828f4b57abc2e50dc09baddf, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:06 PM:new-PerfCounters -DefinitionFileName GalsyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___35D14CB8B01949818832943A391D77B9, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName BackSyncPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___e69599d235234effb6d2740f3c52f7e1, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:11 PM:new-PerfCounters -DefinitionFileName AdminAuditPerfCounters.xml
# [ID = ClientAccessPerfCountersComponent___09bd11b57f6445e890391a507262cf32, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName InfoworkerMultiMailboxSearchPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___324687361E1C473A834C22A66104679f, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:16 PM:new-PerfCounters -DefinitionFileName ProvisioningCachePerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___98C36FFEC7944065889DB24067CFD3EE, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:21 PM:new-PerfCounters -DefinitionFileName OABRequestHandlerPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___1F5A7B68C95B42568E02FAA15A05EF17, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:26 PM:new-PerfCounters -DefinitionFileName DlpPolicyTipsPerformanceCounters.xml
# [ID = ClientAccessPerfCountersComponent___995DEA7A1AC5467C89939F5F8CE5F2AF, Wt = 1, isFatal = False] "Installing or removing Client Access performance counters."
7/5/2014 11:03:31 PM:new-PerfCounters -DefinitionFileName ConfigurationCachePerformanceCounters.xml
# Tasks for 'Client Access Configuration' component
# [ID = ClientAccessComponent___d5119205104847bcb275cb63b65160b6, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:35 PM:
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Owa\Bin\Microsoft.Exchange.Clients.Owa.dll");
          $appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
          precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___954344d74d8849e9ae7123b91761ed9d, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:03:57 PM:
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\Sync\Bin\Microsoft.Exchange.AirSyncHandler.dll");
          $appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
          precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___6632d6c1d5054563942db4f180976238, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:01 PM:
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\AutoDiscover\Bin\Microsoft.Exchange.AutoDiscover.dll");
          $appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
          precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___390b4ffddd484dcb9edc01dd725e020a, Wt = 5, isFatal = False] "Pre-compiling setup binaries."
7/5/2014 11:04:07 PM:
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\exchweb\ews\bin\Microsoft.Exchange.Services.dll");
          $appBase = [System.IO.Path]::Combine($RoleInstallPath, "bin");
          precompile-ManagedBinary -BinaryName $fullPath -AppBase $appBase;
# [ID = ClientAccessComponent___178a10624c88445093855c4ede7e9b9c, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:
          . "$RoleInstallPath\Scripts\ConfigureNetworkProtocolParameters.ps1";
          Set-NtlmLoopbackCheck $false
# [ID = ClientAccessComponent___14a6761e144e428b93c62249acc814fe, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:42 PM:install-ClientAccessIisWebServiceExtensions
# [ID = ClientAccessComponent___28fdfe8bec984e809cdeef6d4d59bf4e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:43 PM:
        if (get-service MSExchangeServiceHost* | where {$_.name -eq "MSExchangeServiceHost"})
            restart-service MSExchangeServiceHost
# [ID = ClientAccessComponent___7816256880dc4be0baf5b005b2af8cd3, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
        if (get-service MSExchangeProtectedServiceHost* | where {$_.name -eq "MSExchangeProtectedServiceHost"})
            restart-service MSExchangeProtectedServiceHost
# [ID = ClientAccessComponent___e95499b43bd1484dbc03098fb1b4e592, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:set-ExchangeServerRole -Identity $RoleFqdnOrName -IsClientAccessServer:$true -DomainController $RoleDomainController
# [ID = ClientAccessComponent___f4c48e196e374cf3af269b1cea0602c8, Wt = 1, isFatal = True] "Installing/Removing the WebReady Document Viewing service."
7/5/2014 11:04:45 PM:Install-TranscodingServiceEx
# [ID = ClientAccessComponent___f50fd59d231140eb9b2405bbed2b93d4, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          if ($RoleIsDatacenter -eq $false)
            uninstall-FBAService
# [ID = ClientAccessComponent___9fad9d51b3ec4ecdad567ab58e470be7, Wt = 1, isFatal = False] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          if ($RoleIsDatacenter -eq $false)
            stop-setupservice -ServiceName MSExchangeFBA
# [ID = ClientAccessComponent___1c7a7da2ab9d41bb8db75522ad28b9db, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          $tpath = "$env:SystemRoot\system32\inetsrv\microsoft.web.administration.dll";
          add-type -Path $tpath;
          $sm = new-object Microsoft.Web.Administration.ServerManager;
          if ($sm.Sites["Exchange Back End"] -eq $null)
            $ppath = "$env:SystemDrive\inetpub\wwwroot";
            $s = $sm.Sites.Add("Exchange Back End","http", "*:81:", $ppath);
            $s.ServerAutoStart = $true;
            $sb =$s.Bindings;
            $b = $sb.Add("*:444:","https");
            $sm.CommitChanges();
# [ID = ClientAccessComponent___a5f211d837784aea931b9ba55c39996d, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          Get-ExchangeServer $RoleFqdnOrName | Add-AdPermission -User "S-1-5-20" -ExtendedRights "Exchange Web Services Token Serialization";
# [ID = ClientAccessComponent__SetInstallPathInMrsAppConfig, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          Set-InstallPathInAppConfig -ConfigFileRelativePath "Bin" -ConfigFileName "MsExchangeMailboxReplication.exe.config"
# [ID = ClientAccessComponent___765cc444ba07411aa81d58397b0401fd, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:45 PM:
          if (!(get-service MSExchangeMailboxReplication* | where {$_.name -eq "MSExchangeMailboxReplication"}))
            install-MailboxReplicationService
# [ID = ClientAccessComponent___151b722e327b42a69411df32afdbbcbb, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationFirewallRule)
# [ID = ClientAccessComponent___7d69bb94f08245589e49eb569c6d5f4f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:46 PM:
          if (!(get-service MSExchangeMigrationWorkflow* | where {$_.name -eq "MSExchangeMigrationWorkflow"}))
            install-MigrationWorkflowService
# [ID = ClientAccessComponent___95f051d9dc5941c4b6014181b6e5ce93, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeABRPCFirewallRule)
# [ID = ClientAccessComponent___959c2d6566984da6b8e0e3235c1c11c2, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangePOPBeByPortRule)
# [ID = ClientAccessComponent___29864e7462374fdb84fc75eec931d8e4, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
          Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeIMAP4BeFirewallRule)
# [ID = ClientAccessComponent___052e1b794d0641ada4d6d417061af2a8, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeOWAByPortRule)
# [ID = ClientAccessComponent___975efd8911fd41cca8b17462535d710e, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
           Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.MSExchangeMailboxReplicationByPort)
# [ID = ClientAccessComponent___023036e43f004bda9f4f4e0b1e0d233f, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
          Install-ResourceHealthActiveFlags
# [ID = ClientAccessComponent___3a51c2876e2c4643bc892d2665754228, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\PushNotifications\" -ConfigFileName web.config
# [ID = ClientAccessComponent___FCC16AC1FFED43518F8292DBE770C621, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\emsmdb\" -ConfigFileName web.config
# [ID = ClientAccessComponent___E9C71786D02E40CBB1403E2E1A4B0758, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:set-InstallPathInAppConfig -ConfigFileRelativePath "ClientAccess\mapi\nspi\" -ConfigFileName web.config
# [ID = ClientAccessComponent___abcab6b91ac844848c58b4ee66fcbea6, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
            ."$RoleInstallPath\Scripts\Install-OutlookServiceVirtualDirectory.ps1";
# [ID = ClientAccessComponent___9D94915F-B12D-4579-93EE-36B6DF42CF4A, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:47 PM:
          $CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
          $MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
          $MapiMailboxClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\emsmdb");
          $clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiMailboxAppPool_CLRConfig.config");
          Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiMailboxAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiMailboxClientAccessPath`" /applicationPool:MSExchangeMapiMailboxAppPool /path:`"/mapi/emsmdb`""
-IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/emsmdb`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___B551AAAC-0F36-428B-B1BB-3B9AFDC9EAEF, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:50 PM:
          $CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
          $MapiClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi");
          $MapiAddressBookClientAccessPath = [System.IO.Path]::Combine($RoleInstallPath, "ClientAccess\mapi\nspi");
          $clrConfigFilePath = [System.IO.Path]::Combine($RoleInstallPath, "bin", "MSExchangeMapiAddressBookAppPool_CLRConfig.config");
          Start-SetupProcess -Name "$CommandAppCmd" -args "add apppool /name:MSExchangeMapiAddressBookAppPool /autostart:true /managedRuntimeVersion:v4.0 /queueLength:65535 /CLRConfigFile:`"$clrConfigFilePath`" /managedRuntimeLoader:`"`"
/processModel.identityType:LocalSystem /managedPipelineMode:Integrated /recycling.periodicRestart.time:00:00:00 /processModel.idleTimeout:00:00:00 /processModel.pingingEnabled:false /failure.rapidFailProtection:false" -IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "add vdir /app.name:`"Exchange Back End/`" /path:`"/mapi`" /physicalPath:`"$MapiClientAccessPath`"" -IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "add app /site.name:`"Exchange Back End`" /physicalPath:`"$MapiAddressBookClientAccessPath`" /applicationPool:MSExchangeMapiAddressBookAppPool /path:`"/mapi/nspi`""
-IgnoreExitCode @(183);
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/access /sslFlags:Ssl /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/anonymousAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/basicAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/clientCertificateMappingAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/digestAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/iisClientCertificateMappingAuthentication /enabled:false /commit:apphost";
          Start-SetupProcess -Name "$CommandAppCmd" -args "set config `"Exchange Back End/mapi/nspi`" /section:system.webServer/security/authentication/windowsAuthentication /enabled:true /commit:apphost";
# [ID = ClientAccessComponent___178FD1A31B5949A0B4A819E39311B1FD, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
            $ExchangeLabsRegKey = 'HKLM:\SOFTWARE\Microsoft\ExchangeLabs'
            $E4eCertificateDistinguishedNameRegValueName = 'E4eCertificateDistinguishedName'
            if ($RoleDatacenterE4eCertificateDistinguishedName -ne $null)
                New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eCertificateDistinguishedNameRegValueName -Value $RoleDatacenterE4eCertificateDistinguishedName -Force
                Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. value: $RoleDatacenterE4eCertificateDistinguishedName"
            else
                Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eCertificateDistinguishedNameRegValueName. Value is null."
            $E4eServiceUrlRegValueName = 'E4eServiceUrl'
            if ($RoleDatacenterE4eServiceUrl -ne $null)
                New-ItemProperty -path "$ExchangeLabsRegKey" -Name $E4eServiceUrlRegValueName -Value $RoleDatacenterE4eServiceUrl -Force
                Write-ExchangeSetupLog -Info "Wrote registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. value: $RoleDatacenterE4eServiceUrl"
            else
                Write-ExchangeSetupLog -Info "Could not write registry key: $ExchangeLabsRegKey\$E4eServiceUrlRegValueName. Value is null."
# [ID = ClientAccessComponent___240c7e5d07f941cfbe69a692dc33a31a, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:52 PM:
          ."$RoleInstallPath\Scripts\ConfigureCafeResponseHeaders.ps1";
          CreateCustomHeadersNodeForBackend 'autodiscover'
          CreateCustomHeadersNodeForBackend 'ecp'
          CreateCustomHeadersNodeForBackend 'ews'
          CreateCustomHeadersNodeForBackend 'oab'
          CreateCustomHeadersNodeForBackend 'owa'
          CreateCustomHeadersNodeForBackend 'powershell'
          CreateCustomHeadersNodeForBackend 'pushnotifications'
          CreateCustomHeadersNodeForBackend 'rpcproxy'
          CreateCustomHeadersNodeForBackend 'sync'
          CreateCustomHeadersNodeForBackend 'mapi\emsmdb'
          CreateCustomHeadersNodeForBackend 'mapi\nspi'
          CreateCustomHeadersNodeForBackend 'outlookservice'
# [ID = ClientAccessComponent___75f8c93d15314369983d33ec0742e189, Wt = 1, isFatal = True] "Configuring Mailbox role: Client Access service."
7/5/2014 11:04:53 PM:
          New-PushNotificationsVirtualDirectory -Role Mailbox -DomainController $RoleDomainController;
# Tasks for 'POP/IMAP Backend Configuration' component
# [ID = PopImapBeComponent___d91be94d83bb4dc28e1fbdf7d94ca60e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:05 PM:
          if (!(get-service MSExchangeIMAP4BE* | where {$_.name -eq "MSExchangeIMAP4BE"}))
            install-Imap4BeService
# [ID = PopImapBeComponent___e2debc6ecabf457eb6f278096ad5102c, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          if (!(get-service MSExchangePOP3BE* | where {$_.name -eq "MSExchangePOP3BE"}))
            install-Pop3BeService
# [ID = PopImapBeComponent___7ee4dbb3fe884d26bb3e060ac68061ee, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          $file = 'Microsoft.Exchange.Pop3Service.exe.config';
          $template = $file + '.template';
          $relPath = 'ClientAccess\PopImap';
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
          $fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
          Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
          Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
          set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___9b86c2af9f364990aa196cb6e69905b6, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          $file = 'Microsoft.Exchange.Pop3.exe.config';
          $template = $file + '.template';
          $relPath = 'ClientAccess\PopImap';
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
          Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
          Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___01c604c08fd6402e9de6b3c45e3431c8, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          $file = 'Microsoft.Exchange.Imap4Service.exe.config';
          $template = $file + '.template';
          $relPath = 'ClientAccess\PopImap';
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
          $fullFilePath = [System.IO.Path]::Combine($fullPath, $file);
          Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
          Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
          set-appconfigvalue -ConfigFileFullPath:$fullFilePath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = PopImapBeComponent___2528980001a444fcb7097d123e879728, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:06 PM:
          $file = 'Microsoft.Exchange.Imap4.exe.config';
          $template = $file + '.template';
          $relPath = 'ClientAccess\PopImap';
          $fullPath = [System.IO.Path]::Combine($RoleInstallPath, $relPath);
          Set-InstallPathInAppConfig -ConfigFileRelativePath $relPath -ConfigFileName $template;
          Preserve-AppSettings -RoleInstallPath $fullPath -ConfigFileName $file;
# [ID = PopImapBeComponent___bbfdc492aaf748298977cb9b98e00029, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Imap4Container -Name:"IMAP4" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___091c98cfe0f145189c0966717496795e, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:install-Pop3Container -Name:"POP3" -DomainController $RoleDomainController
# [ID = PopImapBeComponent___42cb9f4ac2924c27b6ebf60b92a03628, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-ImapSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# [ID = PopImapBeComponent___181f5361a5df4e7ca009f21f26f8c0d5, Wt = 1, isFatal = True] "Configuring the server."
7/5/2014 11:05:07 PM:new-PopSettings -DomainController $RoleDomainController -ExchangePath $RoleInstallPath
# Tasks for 'ClientAccessExchangeCertificate' component
# [ID = ClientAccessExchangeCertificate___fb5e9028e669404d94dba90aace8c2f9, Wt = 1, isFatal = True] "Installing Client Access server certificates."
7/5/2014 11:05:07 PM:
          Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController

Error trying to install Directory Server on Linux - pls help

I get a silly error loop when trying to install the Directory Server 5.2 on a Fedora Core 4 box.
I do a ./directoryserver configure to configure the directory server, and it ran for a bit and then error'ed out in the middle, but most of the install said it was successful.
I try to do a ./directoryserver start and it says Directory Server 5.2 is not configured.
Use:
'/opt/sun/sbin/directoryserver -u 5.2 configure' to configure Directory Server 5.2.I then try to run ./directoryserver configure again, and it says,
An instance of Directory Server has already been configured The current
configuration will not be removed or replacedWhere is this configuration kept, and how do I just manually edit it or delete it? It's blocking my being able to get the Sun App server up, so I need any help I can get.
Thanks much,
--Tad
Church of Scientology
http://www.scientology-washingtondc.org

Gary -
Thanks much.
Do I now have to rpm -e the packages that I have already installed on the system in order for this clean install to work? I attempted removing all of the product registry files and so forth, but on re-install the installer program insists that the pgm is still installed on the system. Slapd is definitely not running (and never was on this system) so that isn't the issue.
I'm thinking perhaps just rpm -e'ing all of the sun-related RPMs that came onto the server and starting over. Better idea?
-- Tad
System Administrator
Church of Scientology
http://www.scientology-washingtondc.org

Tried to install vmware server, now i cant login as user

[root@L1nuXan7 ~]# tail /var/log/messages.log
Dec 6 23:30:27 L1nuXan7 [drm] Initialized i915 1.5.0 20060119 on minor 1
Dec 6 23:30:43 L1nuXan7 kdm: :0[2777]: Can't save user authorization in home dir
Dec 6 23:30:54 L1nuXan7 kdm: :0[2853]: Can't save user authorization in home dir
Dec 6 23:30:59 L1nuXan7 kdm: :0[2929]: Can't save user authorization in home dir
Dec 6 23:34:29 L1nuXan7 init: Switching to runlevel: 3
Dec 6 23:35:05 L1nuXan7 init: Switching to runlevel: 5
Dec 6 23:35:15 L1nuXan7 kdm: :0[3240]: Can't save user authorization in home dir
Dec 6 23:35:31 L1nuXan7 init: Switching to runlevel: 3
Dec 6 23:36:45 L1nuXan7 init: Switching to runlevel: 5
Dec 6 23:36:54 L1nuXan7 kdm: :0[3338]: Can't save user authorization in home dir
[root@L1nuXan7 ~]#
if i want to login with my username "thecrazylol" then kde sets me back to kde login menu
i have installed vmware server in the last session :-/
login as root established

oooh my hdd was full

Hi I am trying to install SQL Server 2008 R2 Express edition, I am getting error like "unhandled exception has occurred in your application"

In that system Microsoft Framework 4.o and 3.5.1 is installed even then i am getting the error then i uninstalled and again installed framework same error occurring.

Hi Chandra,
As other post, please help to post the summary and detail logs for analysis.
Based on my knowledge, the error “unhandled exception has occurred in your application” always happens along with the following message when installing SQL Server 2008 R2:
“An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
or one of its dependencies. The system cannot find the file specified. “
If you encounter such issue, please perform the following steps to solve it.
1.Go to your app data directory by going to start > run > %appdata% .
2.This will by default take you to the "roaming" folder, go up one directory and move into the "Local" folder.
3. Go to the "Microsoft_Corporation" folder.
4. Delete the relevant folders from the "Microsoft_Corporation" folder.
For more details, please review the following blog.
SQL Server 2008 R2 will not install - Unhandled Exception has occurred in your application
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Problems when trying to install Oracle9i server in RH9

I get the following message when I try to install the soft.
I have the environment variables already set, the users, groups,etc.
[oracle@seth cdrom]$ Initializing Java Virtual Machine from >/tmp/OraInstall0/jre/bin/jre. Please wait...
/tmp/OraInstall0/jre/bin/../lib/i686/green_threads/libzip.so: >symbol errno, version GLIBC_2.0 not defined in file >libc.so.6 with link time reference (libzip.so)Unable to >initialize threads: cannot find class java/lang/Thread
Could not create Java VMplease send me an e-mail
[email protected]

this is going to help a lot. Check the pre-requisites regarding libraries and paths.
http://linux.oreillynet.com/pub/a/linux/2003/09/04/oracle_install.html
Joel P�rez

Failure installing Sql Server 2012 x64

Hello,
I am trying to install Sql Server 2012 x64 with SP1, but I am running into the following error(s). It occurs almost immediately after I run "setup.exe":
<error>
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
There was a failure to initialize a setting from type Microsoft.SqlServer.Configuration.SetupExtension.InstallSharedDirSetting.
Error code 0x8564000E.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&EvtType=0x9F9575BA%25400x38AD03A5
BUTTONS:
OK
</error>
Any ideas what else I can do to get past this?

Well... Don't know when I downloaded the original ISO image file. I re-downloaded, and now it extracted, and I ran it, which now I get the expected SQL Server Installation Center.

Error while trying to install SAP 8.8 Pl 10 Server on Windows 7

Hellow All,
I am facing the problem while trying to instal the Server and Server Tool os SAP 8.8 Patch Level 10 on the windows server.It is displaying the error failed to installed:1628 error evertime I try to run the Server Installer.
regards,
pankajk

Dear,
Check the below link:
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1434624&nlang=E&smpsrv=https%3a%2f%2fwebsmp110%2esap-ag%2ede
Thanks,
Neetu

Failure Installing SQL Server Data Tools 2012 on Windows 8.1

I am trying to install SQL Server 2012 with SQL Server Data Tools on my laptop with Windows 8.1 standard edition. It fails each time when it gets to the SSDT installation with the same 1935 error, other features still install. The error
text is as follows:
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please
refer to Help and Support for more information. HRESULT: 0x80073715.
Windows Installer file: F:\1033_ENU_LP\x64\setup\x64\SharedManagementObjects.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140220_201634\SharedManagementObjects_Cpu64_1.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC80C325
I have disabled any antivirus software that may have been interfering and am not sure what else to try. Any assistance on how to resolve this error would be greatly appreciated.

Hello,
Please read the following article about the cause of that error:
http://support.microsoft.com/kb/2688946/en-us
I would like to recommend you the following procedure:
http://www.sqlcoffee.com/SQLServer2012_0008.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Repost: Failure trying to install Collection Server

Similar Messages

Maybe you are looking for