Repost of: Snow Install disc ejects

I just purchased a "family" install disc for Snow Leopard.
It installed easily, albeit quite slowly on both my mini and my macbookpro.
I am unable however to install it on my imac; the disc keeps ejecting (other discs do not eject).
The imac I have I beleive is circa 2009 and it currently is running OS 10.5.8
What am I doing incorrectly?
I was told the "family" disc was good for 5 installs (only need it on 3)
Help!
Rich

Zap the PRAM and Reset the SMC and try again.

Similar Messages

  • Leopard Install disc ejecting during installation

    Had my HD go down.(I know, it's funny when it happens to somebody else.)
    Replaced it with a new one and after some work, got it working with 10.4.11.
    Go to load the Leopard install disc. (I purchased the retail version
    and had Snow Cat running too.)
    Restart begins to happen as I click the restart button to begin installation.
    When Macbook comes back on, it spits out the disc and goes no further with the installation.
    I've had some good technical help from people who know more than me.
    Ruled out the dvd malfunction with the install of Tiger from the disc.
    Ruled out the disc malfunction by trying it a Macbook Pro.
    All the software updates are done as well as the update's updates.
    I tried a firmware update, it came up 'you do not need this app."
    I've tried holding 'c'. Something weird happened when I held 't' like
    someone said to do. There's the option key hold down. The apple hold down.
    Everything is spitting this thing out.
    I'm stuck.
    MJG

    ended up replacing dvd drive with help from youtube. formatted. loaded leopard with no problem. thanks for viewing.

  • Leopard install disc ejects automatically after a minute or so

    Whenever i put in my leopard install disk, it simply makes some noises then ejects itself automatically after a minute or so.
    I have an iMac which is about 2 years old and am currently running tiger 10.4.11
    Really stuck on ideas on what to do
    Even tried the whole turn it on its side trick which didnt work
    Any help would be great, Cheers

    thebruca wrote:
    I also checked if i had a dual layer dvd drive, which i do so really dont see why it wont work
    The suggestion to copy the disk requires a drive that can write (burn) dual layer DVD's. Essentially all DVD drives (including all used by Apple) can read dual layer DVD's.
    I got it off the internet so im not to sure if i can get a refund
    What do you mean by "off the internet"? Is this a retail, Apple-branded Leopard DVD or something else? All the retail disks are black, with a large "X" that almost goes from edge to edge of the disk. Other Apple-branded Leopard disks are gray & only work with certain Macs. They are bundled with the Mac they are meant for & their labeling indicates they are not to be sold separately.
    If you have been sold a gray disk, this is almost certainly your problem.

  • I have snow leopard and can't install disc 2 of premiere elements 9 anyone?

    have snow leopard and can't install disc 2 of premiere elements 9 anyone? the disc ejects after i try install.

    Sorry you're having trouble, alan4555, but most of the video experts hang out in the Premiere Elements forum, which is here:
    http://forums.adobe.com/community/premiere_elements
    and you'll probably get better help there. Good luck!

  • Problems with Booting from the Snow Leopard Install Disc

    I need to do a reformat of my iMac drive and reinsall Snow Leopard.  Then I want to run System Migration and move the contents of my Mac Pro (running Snow Leopard) over to the iMac.
    I placed the retail Snow Leopard installation disc and held the "C" key down during restart.  My optical drive make a bit of random noise and eventually ejects the SL disc.  I've tried a CD, movie dvd and another software program installation disc and none of them seem to be able to be read.  I've sold the Mac Pro and am in a bit of a bind as I need to get this done and shipped out.  I'm also going to have to wipe the Mac Pro drives clean and do a reinstall of Snow Leopard.
    Can anyone help?
    Thanks,
    John

    Do you have the original install discs that came with the computer?
    If you do, try powering up the mac pushing in the disc and hold the OPTION key, which will bring up the start up manager, select the insrall disc to boot from.
    After booting, select the language, on the next page go to the menu bar and select Utilities/disk utilities, select your volume (default name is Macintosh HD, or what ever you ma have named it) First aid tab, run verify disk.
    If it comes up with errors (they will be in red font) click repair disk. Rerun this till it it comes up with "this disk seems OK i(n green font)
    Then quit the installer and eject the disk.
    Try the Snow Leopard disk using the same proceedure (power up, push in disk, holding the OPTION key) to boot to the start up manager, and select the SL disk, and do a clean install.
    Make sure that you have a retail install disk (white SL on it)
    You can try this from the retail SL disc, if you do not have the Original disc(s) you should include all of them to the person you seel/give it to.
    After install, follow these instructions.
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
    http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
    Hope this helps

  • Can't eject an install disc

    I just got a 2009 mac mini with out an operating system installed. I inserted the wrong install disc ( Snow Leopard 10.6.3), and can't get the disc to eject. I've tried holding down the right button on the mouse at start up, hitting the eject button on the keyboard, holding down the option key at start up. No luck, any ideas?
    Thanks
    Tom

    How do I eject a defective DVD?
    How force eject disc
    How to eject your disc?

  • Can I Use My Snow Leopard Install Disc on Another Computer If I've Upgraded the First

    Hello,
    I have a one-time install of Mac OS X Snow Leopard, and I have installed it onto one Mac, I have then upgraded this Mac to Mavericks through the Mac App Store. I am wondering if I am therefore allowed to install Snow Leopard using the same disc onto a second Mac?
    Before you answer, please note that I have gone through most of the install process on this second Mac, and the software does not inhibit the install, henceforth, I am assuming that I am allowed to install it on the second Mac. My second question is does the install disc inhibit a second install if the copy has been activated, and would this 'activation' have been removed because the first Mac is no longer running on Snow Leopard.
    I have no intention of installing Snow Leopard if it is illegal to do so a second time, I am simply interested as it would be far more convenient than buying another install disc, and having to wait 7 days or so for it to arrive.
    Regards and thanks,
    Sam S.
    Any help would be greatly appreciated. Please try and be direct with your answers, I'm not great at understanding ambiguity.
    <Edited By Host>

    If you upgrade to Yosemite, for example, then Snow Leopard is no longer installed on that computer. Technically and legally it can be now installed on another machine. Note, however, that if you need to erase the drive and reinstall Yosemite you must first install Snow Leopard. You could not do that if Snow Leopard was still installed on another machine.
    Beyond this you are on your own, legally.

  • I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

    I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

    Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

  • HT3777 I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation.

    I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation in details. Can you also please let me know about this boot camp.

    You cannot. From a legal standpoint, the license agreement for OS X mandates that you run OS X only on Apple hardware. HP is not (yet) owned by Apple.
    From a technical standpoint, your HP laptop doesn't use EFI, but rather an early predecessor called a BIOS. Apple is the only vendor of consumer computer hardware that uses EFI; other vendors reserve EFI for use in servers.
    Secondly, Apple's operating systems support a rather limited number of configurations of video hardware and mainboard chipsets directly since they need only support those systems that they manufacture. You cannot use Windows software or drivers on OS X, so prior to installation, you would need to write your own hardware drivers for your laptop, create an OS X drive image on a Mac, and then modify that image with your drivers before putting it in the HP.
    It will be simpler (and legal), to simply purchase a used Mac. Apple's online store has refurbished MacBook Airs starting at $850 and Mac Minis for $700. If you go to e-bay or craigslist, you'll find used Macs for considerably less.

  • Do I need to install the drivers on my old Mac Pro disc or from my Snow Leopard disc?

    Hi,
    I've got a 2008 Mac Pro (dual quad @ 3GHz) w/ 24GB RAM and I've got Windows 7 Ultimate 64-bit installed. What do I need to install?
    On my newer 2009 iMac (which included Mac OS X 10.6) I just inserted that disc specific to the iMac and installed the drivers, but the disc for my Mac Pro is old (10.5.2) do I need to install the drivers on it or not? Can I just insert my Snow Leopard 10.6 disc to install Boot Camp etc., or won't that include drivers for the Mac Pro? The Mac Pro is running Snow Leopard 10.6.8.
    Thanks.

    Thanks for your reply,
    I have both the silver discs specific to my iMac and Mac Pro models that you receive with your Mac, and a general copy of Snow Leopard that you buy from the store.
    I used the silver disc that is specific for my iMac to install the drivers, and Boot Camp 3.0 on my iMac. But with the Mac Pro, the software is older and only has Boot Camp 2.0, thus I'm wondering if I can simply use the software on the general copy of Snow Leopard I own, or does the silver disc contain specific drivers for my Mac Pro that I need?
    I'm under perhaps the wrong impression that the silver discs that you get with your Mac purchase contain drivers for your specific Mac model which you can't get from the general Snow Leopard disc.
    Thanks.

  • After installing a new hard drive can I install snow leopard directly from snow leopard disc

    After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

    You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
    (64305)

  • I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands

    I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
    initialy All I was trying to do was downgrade 10.7 to 10.6 .

    You have to consider the possibility the hard drive may be dying.    If your data isn't backed up, try one of the tools below:
    https://discussions.apple.com/docs/DOC-1689
    Once you are sure your data is backed up, we can examine other possibilities.  In the meantime call AppleCare for your original installation DVDs.  You may need them.

  • Cannot Install Windows, disc ejects

    I have used Boot Camp to install Windows a few times before on my Leopard operating system, though I had to uninstall it a couple times (I realized I couldn't use my reinstall disc from my old PC). Every time it worked smoothly and I never had any troubles.
    For some reason this time around, I am able to partition the disc just fine, but when I choose to start the installation, the computer reboots, but instead of installing windows, it ejects the disc needed and simply starts up Mac OSX. I've tried using option to select the disc (the disc ejects before I'm given my options) and telling the computer to reboot using the disc. Neither has worked. I've used this same disc before to install Windows, and it worked fine then. What can I do to make the disc not eject, so I can install windows?

    I experienced this as well. What I discovered is if you push the XP install disc back into the drive while your Mac is still at the grey screen when it reboots you will find the install will continue just fine. This will happen a couple of times during the install process, just push the XP install disc back in each time and XP will install.

  • How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • How do I reinstall my operating system after hard drive upgrade on MacBook pro?  I have Snow Leopard install disc

    How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
    HELP PLEASE!!

    Is the new HHD in the MBP?
    Is the new HDD formatted Mac OS Extended (Journaled)?
    Where is the old HDD? In an enclosure?  What is on the old HDD, your user data?  Is the Snow Leopard System on it?
    Do you have a separate Time Machine Disk with your user data?
    Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
    Ciao.

Maybe you are looking for