Repost on no sound with a bigger problem

awhile back i posted cause i had an issue with the headphone jack... how i would only get sound out of the right side... it worked fine for a bit..
well.. now the whole jack itself has broken off...
hmm.. i have taken the harddri've out cause godforbid i dont wanna lose all my music too..
now... i know there was an issue with the jack... i had posted and could not get a clear answer as to if i have to pay to get a KNOWN problem fixed out of warranty...
now i did take the harddri've out and did remove the jack from inside cause it was rattling around... its out of warranty anyway, and i dont feel like losing my music files, during shipping or for any other reason at that...
how can i get this fixed?
do i need a new board inside the player?
is it just the part that needs to be put back on CORRECTLY?
and the big question...
how much is this **bleep** thing going to cost me to get it working again...

Creative may repair it for a cost, or they may not, I don't think they are obliged to. Try contacting them.
Why didn't you just back up your songs onto a computer and then retransfer them when you got a new player, or the problem was fixed. It might take a few hours, but is surely easier than taking the hard disk dri've out?

Similar Messages

[SOLVED] No sound with Chromium, libpepflashplayer problem.

Hi,
I had problem with no sound in Chromium when using the flashplayer, but it all worked in Firefox.
The problem was the chromium-pepper-flash player that I used as described in the Wiki.
with that player I get following message when starting Chromium:
ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'Audigy Analog/Digital Output Jack',0,0,0): No such file or directory
But if I use:
Shockwave Flash
Version: 11.2 r202
Location: /usr/lib/mozilla/plugins/libflashplayer.so
Type: NPAPI
I got sound ok, unfortunately the player crach much more often, something that was the reason I changed to chromium-pepper-flash player
Any ides why I do not get sound in Chromium with chromium-pepper-flash player?
Best regards.
Christer
Last edited by agkbill (2012-12-08 08:29:34)

To share my findings.
The problem was a the settings in asound.conf.
My old "asound.conf."
# conver alsa API over jack API
# use it with
# % aplay foo.wav
# use this as default
pcm.!default {
type plug
slave { pcm "jack" }
ctl.mixer0 {
type hw
card 1
# pcm type jack
pcm.jack {
type jack
playback_ports {
0 system:playback_1
1 system:playback_2
capture_ports {
0 system:capture_1
1 system:capture_2
Left since I was playing around wirh PureData and Jack.
All my outher audio apps like mpd, xbmc worked just finde with this one but not libpepflashplayer.
My new asound.conf
# use this as default
pcm.!default {
type hw
card 0
device 0
ctl.mixer0 {
type hw
card 0
With the new one also libpepflashplayer works OK.
Using libflashplayer was a very bad option for me because it crash so often. libpepflashplayer much more stable for me.
All the best.
Christer

On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796>

My ipod sounds as if it has interference when on docking station.....3 other apple devices work with no such problem...i.e nano ,classic and 2x separate iphones, with no problems .I have been given a 2nd ipod touch replacement, it plays with interference

ipod problems
My ipod sounds as if it has interference when on docking station....3 other apple devices work with no such problems, i.e a nano. a classic and 2 separate iphones so the problem doesn't seem to be the docking station...I have been given 2 reolacement ipods and the sound persists....it is obviously the connection.....as before downloading any data on the new ipod I docked it and the noise was present ....mairiskye....

- Is it a 4G iPod? That model sometimes mates poorly with dock because the configuration of the iPod by the dock connector is different that other devices. Thus, make sure it is fulld/seated in the dock.
- Have you brought the iPod and dock to the Genius at the an Apple store.

No sound with apps and alerts unless headphones are in. Everything else works well. I tried resetting but it didn't solve problem.

No sound with apps and alerts. Everything else works. Tried resetting, didn't solve problem. Apps have sound with headphones only

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

[SOLVED]No Sound with ALSA - Intel Corporation 82801G HD Audio

Hey all,
I've succesfully installed Arch Linux. My past two attempts have met with failure, all because of my own failure to read and follow directions correctly. This time everything is installed correctly. I am running Kdemod3 on my laptop with Arch and everything works great. I LOVE Pacman and the simplicity of Arch's configuration files. It's super fast and all together simple. My only remaining problem is this:
My sound with ALSA is not functioning. I followed the installation instructions at the arch wiki and after unmuting all of my channels I still would not get any sound. My sound module is snd_hda_intel and it is detected, loaded and the whole nine yards (as far as I can tell). My user is a member of the 'audio' user group also. I looked at the troubleshooting tips on the bottom of the Wiki but decided not to try them as they do not seem to pertain to my card (snd_hda_intel) but I will try them if anyone would like me to.
If anyone has any ideas, they'd be greatly appreciated!:D Anything I can provide that you need I will be more than willing to provide.
Thanks for such a great distribution,
Dan
Last edited by JazzDan (2008-06-29 05:06:35)

Problem resolved. I ran alsaconf, selected my soundcard, and everything was working from there out. Thanks MisfitI38 on the IRC!!!

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

No Mic Sound with Pulseaudio, works fine with Alsa.

Have a Acer Aspire One D225E that I've set up with Gnome 3. Everything seems to be working except I'm not getting any sound out of my microphone. I've messed around with the sound settings in the gnome settings app with no success. Using alsamixer, I've made sure the mic channel is unmuted.
I'm able to record sound with Audacity using Alsa and play it back fine. When I switch to pulseaudio however, I get nothing. This wouldn't be a problem, except skype only allows you to use pulseaudio to record if you have that installed.
I've checked the wiki troubleshooting section on Pulseaudio and found the section on Acer Aspires, but solutions in the link led to a dead end. Nothing has worked so far that I've tried.
Here's my sound device:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
Output of arecord -l:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Mic source from "pactl list sources"
Source #1
State: SUSPENDED
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Internal Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 4
Mute: no
Volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
Base Volume: 10%
-60.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC272X Analog"
alsa.id = "ALC272X Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0x58200000 irq 44"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "N10/ICH 7 Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internal Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC272X"
alsa.components = "HDA:10ec0272,10250002,00100001"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input: Analog Input (priority. 10000)
analog-input-microphone: Analog Microphone (priority. 8700)
Active Port: analog-input-microphone
Formats:
pcm
Hopefully someone with more knowledge of pulseaudio will be able to point my in the right direction on this one.

I have exactly the same problem with my Acer Aspire 3820. It's definitely pulseaudio related, since arecord works.
Sound device:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Output of pactl list sources:
Sorgente #2
Stato: SUSPENDED
Nome: alsa_input.pci-0000_00_1b.0.analog-stereo
Descrizione: Audio interno Stereo analogico
Driver: module-alsa-card.c
Specifica di campionamento: s16le ch 2 48000 Hz
Mappa dei canali: front-left,front-right
Modulo di appartenenza: 5
Muto: no
Volume: 0: 0% 1: 0%
0: -inf dB 1: -inf dB
bilanciamento 0,00
Volume base: 8%
-66,00 dB
Monitor del sink: N/D
Latenza: 0 microsec, configurata 0 microsec
Flag: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Proprietà:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VB Analog"
alsa.id = "ALC269VB Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf0800000 irq 44"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "384000"
device.buffering.fragment_size = "192000"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Stereo analogico"
device.description = "Audio interno Stereo analogico"
alsa.mixer_name = "Realtek ALC269VB"
alsa.components = "HDA:10ec0269,10250364,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Porte:
analog-input-microphone-internal: Microfono interno (priority: 8900)
analog-input-microphone: Microfono (priority: 8700, not available)
Porta attiva: analog-input-microphone-internal
Formats:
pcm
I've been struggling for months, but still no answer. None of the volume tweaking tricks work, obviously, and I couldn't find any useful answers in the PA mailing list.

Cannot record ingame sound with glc (-git)

I have a problem with recording ingame sound with some games with glc (well, glc-git). glc says, it can record sound from games, if they use alsa (or sdl and forcing sdl to use alsa). As long as I don't use pulseaudio, this shouldn't be a problem. But for some games, I can't get the sound recording to work. The 2 at the moment are:
FTL
Amnesia: The Dark Descent
I usually get a message like this:
[ 1.46s alsa_hook error ] 0xa8a8170: unsupported audio format 0x0e
[ 1.46s alsa_hook error ] 0xa8a8170: can't extract hardware configuration: Operation not supported (95)
I can record the game, but not the audio. If someone can help or test it, if it works for him, that might be nice. Or if someone knows a workaround or so. Or if someone can confirm, that there is no audio recording for those 2 games (but I actually don't wanna hear it... :-) ).
Also there are plenty of games, I got the audio recording to work with. You can see it in my youtube-channel: http://www.youtube.com/user/ChemBroTronNo1

doorknob60 wrote:Do you use 64 bit? I don't have a copy of Amnesia downloaded right now, but if Amnesia is a 32 bit binary game, and you use 64 bit, you need to make sure you have the proper 32 bit libraries. lib32-glc will probably be enough.
That's not the issue, the problem is that some games are firing 32-bit float audio (0x0e type as indicated in the error) into ALSA through whatever means, and the standard GLC only supports 16, 24 and 32bit signed int audio. My fork above adds very rudimentary support for float.
Last edited by Darkimmortal (2012-12-02 01:13:35)

Only vibrates does not ring or sound with text even with tones selected

HELP!!! My phone is not on silent or do not disturb but it only vibrates and does not ring or sound with text messages All sounds have been selected correctly. Any idea what could be wrong?
Thanks!

I don't have sound anymore either. The mute button is in the correct position, the sounds are all on and the volume is all the way up. iTunes plays but I only get vibrations when a call or text comes through. I tried resetting but it did not solve the problem.

PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD

PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD

Dear Bill,
Thanks for helping me.
G-Spot reports:
Audio
Codec: PCM Audio
Info: 48000Hz 1536 kb/s tot (2 chnls)
Video
Codec: dvsd
Name: DVC/DV Video
Status Codec(s) are installed
Len 2:36.960   Frms 3,924   kbps 28800   Qf 2.778
Pics/s 25.000   Frames/s 25.000   Field/s 50.000
I/L   BFF   PAL
Pic (w x 720 x 576   seq ext 16:9
Sar 1.250 (5:4)   par 1.422 (~10:7)   dar 1.778 (16:9)
I have imported a WMA-file in Audio-1 track of PE – still no sound to hear. But I can see the sound in the track. (Like in my video-clip) Therefore I also think it is a setting in PE. Will you be so kind to tell me where I have to look? Because I am no expert. Or is it possible that I have to activate anything in PE? It is first time that I will work with PE 9.
Further information: The original sound of the Mini-DVD is 5:1 surround. After first problem I have changed Nero to export in Stereo, but this did not solve the problem.
Thanks and regards
Werner

No sound with quicktime MPEG 2 program

I bought yesterday the Mpeg2 option. The problem is that the mpg files have no sound sound when i play them. Theses files come from windows recorded with a sony HD camera. If i use the program Mplayer ( freeware ) everything is ok. Can you tell me what can i do to have sound with quicktime mpeg2

Can you tell me what can i do to have sound with quicktime mpeg2
What Klaus1 is attempting to point out is that the Apple QT MPEG-2 Playback Component is a video only component. As such, the audio is compatible only if the audio format in the multiplexed file is already QT compatible with your system configuration. An MPEG file normally consists of MPEG-2 video (handled by the component you purchased) which is multiplexed with MPEG-1 layer audio (MP1, MP2, or MP3), AC3, or PCM audio. If all you want to do is make your file playable with audio in the QT X and/or QT 7 media player, then the easiest approach is to simply convert the non-playing audio compression format to one that is supported. In most cases that would be an MPEG file type containing MPEG-2 video (from the source file) re-multiplexed with MPEG-1, Layer 2 (MP2) audio. This is a very common combination compatible with both Mac and PC platforms.
Since you already have the Apple QT MPEG-2 Playback component installed, all you really need is the free MPEG Streamclip application. Simply open the file in MPEG Streamclip, select the "Convert to MPEG with MP2 audio..." option, and provide a new name for your target file. The Streamclip application will then de-mux the file, convert the audio (probably AC3) to MP2 audio, re-mux the MP2 audio with the original MPEG-2 video and copy it to the newly named MPEG file container. Since the video is not re-compressed by this action, the work flow is reasonably fast. Further, if you have a lot of files to convert, you can even set up a batch list of files to be converted. MPEG Streamclips is a very handy application and highly recommended if you plan to do much trimming/limited editing of MPEG-1 or MPEG-2 content on a Mac.

Recording sound with Soundbooth

I managed to record sound with the system 'sound recorder', but when I try to record sound in soundbooth with the same mic (simple cheap mic) there is nothing showing on the meter and nothing records. Can somebody please explain to me what is the problem?

While Premiere and Soundbooth both support a Windows audio standard called ASIO, both also include a driver that will let you use audio devices that do not support this format. The driver is configured by default, but may not always select the proper input port - depending on the audio device and what Windows reports to the application.
Fortunately, it's not too difficult to tinker around and find the right setting. In Soundbooth, choose Edit > Preferences > Audio Hardware... In the dialog that pops up, you should see a drop-down labeled "Default Device" If you are running Soundbooth CS4, you should see "Soundbooth 2.0 WDM Sound" listed here. Click the Settings button, and in the new dialog, click the "Input" tab. Here you'll see a list of input ports for your selected audio device. Make certain your microphone port is enabled, and click OK a few times to get back to the main program. Click the Record button and make sure the microphone input is selected in the Port: dropdown. Try recording and see if this solves the problem.
If it still does not record, or you do not see the proper input to enable, you may need to verify the proper audio device is selected, or if you're running Windows Vista, that the input port you want to use is enabled in Window's Audio settings. You can find this by right clicking on the speaker icon in your system try and choose "Recording Devices."
Good luck!
Durin

No Sound with Flash 10

Hi,
I'm back with a new problem. On a Gateway laptop running Windows XP, I have no sound with Flash. Sounds are coming through on Media player and with web sites home page. When I play a you tube vid or email vid there is no sound? ????
Thanks for your help.

I did the ten step codec cleaning, I think you posted that originally if not
I'll dig up the link, sorry I'm at work. After that I ran malwarebytes (no
malware), then I accessed the audio properties under the control panel and
monkeyed with them, they'd been changed to modem#0 from my normal semantec
harware. I changed that and rebooted and everything was seemingly okay.
However, the little speaker icon had disappeared from the tray about the
same time my audio problems had started and has never returned so there may
be deeper issues.
Here<http://www.codecguide.com/fix_for_flash_sound_problems.htm> is
the codec link I was referring to. Hope this helps. D

Surround sound with Astro A40 headset

%Surround sound with Astro A40 headset? I've been having problems getting surround sound to work with my A40 headset to work with my computer.
I have an X-Fi Titanium and I'm running Win 7, although I also had this issue on XP and Vista.
Originally when the A40 was connected by optical cable the audio was distorted and would crackle heavily. Installing the <a rel="nofollow" href="http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/m-p/527485]DanielK support pack[/url] fixed the distortion and crackle issues.
Next, someone suggested I get the <a rel="nofollow" target="_blank" href="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222DDN6Z2H2ADDEZD">DDL pack[/url]. I tried installing it but I get an errorhttp://i.imgur.com/qag0X.png
Any ideas?

for the DTS Connect Pack, try right clicking it and choosing properties and then choose compatibility and then Vista SP2 or XP (as a last result), and be sure to run it as administrator.

Repost on no sound with a bigger problem

Similar Messages

Maybe you are looking for