Reposting: Ctrl+H option not available after x3650 M4 firmware update

This post was originally posted on IBM’s developerWorks public forum (https://www.ibm.com/developerworks/community/forums/html/topic?id=77777777-0000-0000-0000-0000149306...) The following is a summary of the post issue and the response.
Issue:
After a firmware upgrade (included IMM, HDD and ServerRAID) to my x3650 M5 (Windows 2008 R2 Server) system, the “Ctrl+H” option to enter the WebBIOS Configuration Utility was not available anymore for RAID reconfiguration. The system boots directly into Windows.
Response:
The “Ctrl+H” option is only available in the Legacy mode so your system must have the UEFI mode enabled. There are 2 options,
A – Use the uEFI F1 System Configuration Utility for configuring RAID
B – Enable back Legacy mode by adding "Legacy Only" at boot order on the 1st step.
Also, if you have a working Windows installation you could also install the MegaRAID Storage Manager application to manage your array controller via the OS. It is normal behavior to skip the legacy BIOS menus of adapter cards if a UEFI-aware OS is installed.
The MegaRAID Storage Management (MSM) Application v12.05.03.00 is available at,
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5077712
You may also use the UpdateXpress Installer to perform future driver/firmware upgrades from within the OS as well (or manually download the packages from the FixCentral page for your system type).
The UpdateXpress is available at,
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=serv-xpress

Hi, 
You said:
"D. Lights Effect is a very good feature of 6303 and in my opinion it would be updated as another possibility to select it as Breather Light Effect such as Nokia 5800 XM, due to Silent Profile activated Handset Location assistance facility. User can find the set easily rather making a miss call to find out where the set is?"
Isn't this the same as setting "light Effects=On" in the settings? Mine "breathes" away happily after a missed call.
You said
"J. SMS alert tone selection plays the tone in Level one Sound volume though the selected level is Five bar. it should be corrected in Future update."
Where are you adjusting this? I can only adjust ringtone volume not SMS alert tones....
Cheers
------ N78 -------

Similar Messages

  • My iPhone 4s's wi fi is not available after ios 7.1 update

    I updated my iPhone 4s from 7.0.4 to 7.1 and the next morning my wifi had stopped working. It's usually greyed out and is completely unavailable. I tried restarting a couple times. One time it wasnt greyed our and let me connect to my wifi (typed in the password and everything). But as soon as I tried to load anything or refresh anything it just sat there loading until it would say connection not available. It's now greyed out again. Does anyone know if there going to be working on another update that may fix this. Or has this update fried the actual wifi chip inside my phone.

    Sorry, chip or a weak solder connection has fried .  This has happened rarely after every update since 1.0.1, and with every iPhone model.  The update is stressful on the phone when burning the firmware and marginally functioning components may fail.  Try the steps described in the support article below, but it's likely that you'll have to replace the phone.
    iOS: Wi-Fi settings grayed out or dim
    Do NOT try the "freezer" or "hairdryer" methods you may see. At best they're a temporary fix and likely to do further damage to the phone.

  • Ram not working after 2.8 firmware update

    Installed the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Anyone else experiencing this? Is there a fix to get the 8 gigs working again on the machine?

    That's the correct RAM for your computer. Those computers were originally spec'd to only use 4GB's max, a "secret" firmware update was found to let them use 8GB's max. I wonder if this firmware update set things back to 4GB's max. And before you ask, no you can't downgrade firmware.

  • Send option not available after hitting "reply",

    I hve a 8830, and about half the time, when replying to email messages, the option of send does not come up after typing a reply.  Any ideas?
    thanks
    art

    Try with soft resetting your device by pulling the battery out for 1 min.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Lion Server network accounts not available after 10.7.4 update

    I installed the incremental update for Server 10.7.3 to 10.7.4, and now my network accounts can't log in. That would be all users of the machine then. How can I fix this?
    Unimpressed!

    Exact same thing happened to me on my 2010 MacBook Pro, running Lion as well. Updated to 10.7.4 and whammo, no more DVD drive. Tried numerous discs and the computer just mulled over whether it was going to play the discs for a few attempts then spat them out. All the discs I tried were in perfectly good working order.
    Just saw this thread, but created one of my own before (https://discussions.apple.com/thread/4026857). Still waiting for some help....

  • Thunderbolt Display USB ports not working after 1.2 firmware update

    I installed the Thunderbolt Display Firmware Update 1.2 a few days back, and following that update, the USB ports on my display have stopped working completely. The display's Thunderbolt port and Ethernet jacks are working fine, as is the Thunderbolt/power cable connection to my MacBook Air (mid-2011, 11 inch, running OS X Yosemite 10.10.1). Any ideas on a fix?

    Do an SMC and PRAM reset.

  • Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

    Hi everyone,
    I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
    Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
    What does this mean?
    Regards
    Please rate all useful posts
    Favor calificar todos las respuestas útiles.
    LinkedIn Profile: do.linkedin.com/in/leosalcie
    MDGDP, CCNA, CCNA Voice, CCNP Voice Certified       

    Any idea?
    Please rate all useful posts
    Favor calificar todos las respuestas útiles.
    LinkedIn Profile: do.linkedin.com/in/leosalcie
    MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

  • Mac mini bluetooth not available after updrading to OSX 10.8

    The bluetooth module is not available  after upgrading to OSX 10.8 on a mac mini late 2009, anyone with this issue?
    Message was edited by: Magnusum

    I have an issue where I get Bluetooth mouse/keyboard at the login screen, but once it goes to the desktop they are both dead. This only happens when I have my Drobos plugged up via FireWire. If I boot without those devices plugged in, it works.
    Anything like that for you?

  • Preview on [device name] option not available

    Preview on [device name] option not available on Folio Overlays

    In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
    Are you using InDesign CS5.5 or InDesign CS6?
    You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
    Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
    Uwe

  • I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

    I have the latest version of photoshop cc. Why is the focus selection option not available ?

    Use CC 2014 menu Help>System Info... use its copy option and paste the info here.  So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

  • Content Server Explorer is not available after sucessful installation of Plumtree Portal

    Content Server Explorer is not available after sucessful installation of Plumtree Portal.
    Please reply us.

    To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
    Interesting question - thanks for that. Until now I didn't realise there was a difference.
    The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
    Many thanks,
        Geoff

  • WLAN override option not available for WLC 4402 - 6.0.196.

    Hi All,
    Its kind of weird BUT it seems that the option for WLAN override is missing.u.
    I could find it on the lower version BUT not on the 6.0.196.
    Please help.
    Does this mean I could only set it up via the WCS and not the WLC directly.
    Thank you.
    Warmest Regards,
    Azzafir Ariff Patel.

    Hi Scott,
    Thank you so much for the clarification.
    Thanks again.
    Quoting fella5 :
    azzafir,
    >
    A new message was posted in the Discussion thread "WLAN override
    option not available for WLC 4402 - 6.0.196.":
    >
    https://supportforums.cisco.com/message/3042635#3042635
    >
    Author : Scott Fella
    Email : [email protected]
    Profile : https://supportforums.cisco.com/people/fella5
    >
    Message:

  • Option not available to add skype to go number in ...

     Option not available to add skype to go number in canada.... Urgent its been 1 week

    venkatesh wrote:
     Option not available to add skype to go number in canada.... Urgent its been 1 week
    Skype To Go numbers are available in the following countries:
    Australia
    Canada
    Chile
    Denmark
    Estonia
    Finland
    Greece
    Hungary
    Ireland
    Latvia
    Lithuania
    Luxembourg
    Mexico
    New Zealand
    Poland
    Portugal
    Romania
    Slovenia
    Singapore
    South Africa
    Sweden
    United Kingdom
    USA
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • DataSource not available after restart

    Hi,
    I have created a new JDBC driver for MS SQL Server 2005 and a custom data source that is using the JDBC driver and that is connecting to my database. Upon creation of the data source, the data source is shown as available (green) and works fine.
    However, when I restart my system, the data source is still there, but is not available (red). When I delete the data source and create it again, it works fine.
    Does anybody know why the data source might be not available after the restart of the server? Any help would be highly appreciated.
    Best regards
    Holger

    I don't know what I should change in the MS SQL Server. And as the DataSource works correctly once I have deleted and recreated it, I would have thought that the problem is somewhere with the application server.
    A colleague of mine is using the same application and is having the same problem, although he independently created his system.
    Best regards
    Holger

  • HT204053 iCloud option not available on MacBook Air

    Why is the iCloud option not available on my MacBook Air?  It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.

    r_lopez wrote:
    Why is the iCloud option not available on my MacBook Air?  It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.
    iCloud won't appear in System Preferences in Snow Leopard. But, you can get some of the features of iCloud working with 10.6.
    Mail AND iCal work just fine. See this article: http://bit.ly/LvVCR2
    I use the iCal info on two of my own Macs and it works fine. The Address Book hack is a maybe. Read through the comments associated with the blog entry. Some folks have gotten the AB hack to work by locking the plist file.

Maybe you are looking for

  • XML Parsing Error in applet

    I'm trying to parse a XML dicument in an applet with the following code String url = "myfile.xml"; org.w3c.dom.Document doc = null; try doc = db.parse(url); catch (SAXException se) System.out.println("SAX error"); and get the SAXException when the XM

  • Creative Live Cam Video IM Pro & Kubuntu

    Are there linux drivers available for this web cam? Sure would be nice to be able to use it on something other than Windoze. Or am I just SOL? Thanks, Scott

  • Need Help with Adobe Acrobat please

    I have recently started using Adobe Acrobat. I use it to combine several files (Word, powerpoint, and excel docs) into one pdf, which I then email out to meeting attendees. Then, at the meeting, I use the pdf for my AV presentation. But - my remote s

  • Is it possible to set default column widths in list view when using a finder window in Mavericks?

    The default 'document' column is way too wide and forces you eye to track all the way across the screen to read info like "date modified', 'kind' or 'size'. Tried several times to create a narrower default 'document name' column with no results. Coul

  • Selecting records based on month and year parameters

    Hi. I have a sql 2008 r2 stored procedure which needs modifying to return the data based on a start / end month and year. It's a large SP so I'll summarise - It accepts four parameters: @StartMonth NVARCHAR(10) @StartYear NVARCHAR(4) @EndMonth NVARCH