Reposting Profit Center Line Items

Good day everybody,
I would just like to ask if there really is no standard transaction to repost profit center line items (unlike for cost center line item reposting - KB6) Or is there any workaround for this lacking functionality? Thanks!

Hi
There is no specific reposting transaction for PCA documents. The alternative is to post a PCA a document via 9KE0.
E.g. Requirement : repost $100 from PC 100000 to 200000
Post a PCA document
PC          Account  In Pct currency
100000   310101     - 100
200000   310101       100
Hope this is clear
Rgds
Nadini

Similar Messages

  • Profit center line item report

    Hello All,
    A sales order is created with reference to a service order, now when I see Profit center line items, the function area available in Service order is differ from the function area displaying with sales document number in profit center line item report. Can anyone please tell me where could be the problem.
    Full points will be awarded for the answer.
    Thanks & Regards
    Srini

    Hi,
    what SAP release do you have ?
    Normally the derivation of the functional area is made with the following logic:
    1) manually entered
    2) FI-Substitution (calling point 5 or 6 since ERP2004)
    3) cost center
    4) cost element
    Please see also SAP note 106180 of how to correct wrong functional areas in PCA.
    Best regards,
    Andreas

  • Profit center line items KE5Z - order missing - GLPCA-AUFNR

    Hi folks,
    could anybody give me an advice how to arrange that the order will be displayed in the KE5Z report?
    Field GLPCA-AUFNR
    Thanks a lot.
    Regards
    Edited by: Peter Jankech on Jun 4, 2008 1:41 PM

    Sorry for unclear set question.
    I know how to edit a layout.
    The problem is, that the field GLPCA-AUFNR is initial, therefore in KE5Z-Profit center line items the field order is empty.
    Is there any customizing setting or SAP-Note, which ensures that the field GLPCA-AUFNR is filled?
    Thanks

  • Reposting Profit centre line items

    Dear All,
    Can someone please clarify if there is an option to repost the line items which were posted to wrong profit centre? We had posted some entries to wrong profit centre and we want to repost it to the correct profit centres. Please clarify if some option is available.
    Regards
    Suresh

    Hi
    You can use tcode 9KE0 , where in u can refer original doc no. also . you can enter wrong and right profit center using + , - signs .
    assign points if useful
    best regards
    Venkat

  • Profit center line items are not displaying in KE5Z

    HI Eperts,
    we are executing tcode KE5Z. System is not displaying any line items. because we have missed out in configuration updation of line items and on line transfer check boxes activation in 1KEF.
    please advise how we have to retreive whole data posted up to now under this controlling area..
    Regards
    vekat....

    Hi Venkat,
    Please check the following link.
    [http://help.sap.com/saphelp_45b/helpdata/en/eb/1370e343c411d1896f0000e8322d00/frameset.htm]
    Also check the tcodes 1KE8 (Transfer FI Actual Data), 1KEC (Transfer MM Actual Data) and 1KE9 (Transfer SD Billing Documents)
    The path for these tcode is as under:
    Controlling --> Profit Center Accounting --> Tools --> Prepare Production Startup --> Data Transfer.
    Please check in your test system first.
    Regards,
    Sameer

  • Profit Center Line Items from Retrospective Effective.

    Dear All,
    We implemented the Co Module with profit Center Accounting in the month of April 2007.
    But we forget to Activate Direct postings, Because of that Actual line items  has not appeared in the T-code KE5Z.
    What i have to do to get the Actual Line items in the KE5Z from the postings made from April month.
    Thanks for your immediate Response.
    Best Regards.

    This tool could be used, if you activate FI first and later at some point go for PCA. That time you can retrospectively.
    This function lets you post data from Financial Accounting to Profit Center Accounting. All the documents found for the selection criteria are displayed in a list. By double-clicking you can look at the corresponding FI document to check whether the desired documents were selected.
    Requirements
    1. Profit Center Accounting must be active.
    2. The control parameters for actual data must be maintained. In particular, the parameter "Line items" must already be set if desired. Additional prerequisites for the data transfer are described in the section Data Transfer.

  • AIAB Error is showing profit center line item 001 not filled

    Dear All,
    In Asset Account while posting AIAB t.code  system is showing error
    Balancing field "Profit center" in line item 001 not filled.
    Message no. GL2201
    Diagnosis.
    The profit center marked as balancing is not filled with any value in line item 001, even after document splitting
    System response
    The document cant be posted
    Procedure
    First check your entry.
    additional causes could be:
    .No value can be derived for this field from the current document data.
    .You have  entered a document type that is not designed for this business purpose.
    previously it is coming correct now we are splitting two company codes means previously company code 0555 now we are splitting and creating another company code 0666 in that company only it is showing the error.
    Regards,
    Teja

    Hi
    Did you maintain cost object in your asset master
    And does your IMG settings for the new co are in place to refer Cost Obects from asset master for Purchase and depreciation transactions
    you do this in the IMG Step "Integration with General Ledger"
    Regards
    Ajay M

  • Profit center line item Display

    Dear SAP Guru,
      When i post advance payment to vendor ,  in this case in g/l line item advance payment g/l show the Profit center , but when i check in t.code : KE5Z ( Profit center actual line item )  thr. advance payment g/l a/c does not diaply as i postees profit center .
    need solution urgently ..
    Regards ,
    Milind

    Hi Milind,
    Posting to profit center, by default,  is a statistical posting that go to profit center via assignment to CO objects or Master Data. Please check, whether your profit center already assign to one of CO objects such as Cost center. Or you can also the the assignment profit centers via 1KE4 - Assignment Monitor.
    If you already  assigned the profit center to CO objects and still  not shown in line item display, it can be caused be several reasons:
    1. Check the field status of your GL account ( the advance payment) via FS00 on tab "Create/Bank/Interest". Double click the "field status group" then on "display field status group overview" select the "additional account assignment", then check on profit center, is it as "optional entry" or "Suppress". If suppress, maybe that cause of your problem. on the other side, it set to "optional entry" you need to check the field status of you posting key.
    2. Posting key GL account Dr is 40. then go to customizing:
    Financial Accounting>Financial Accounting Global Settings>Document>Line Item>Controls-->Define Posting Keys
    Execute the define posting key, then go to PK 40. Double click the PK40, then on the top side click "Maintain Field status". Then select the "additional account assignment", check the field status of profit center.
    Hope this can resolve your problem. Please check it out
    Irhasni

  • KE5Z Profit Center Line Item : Document Drilldown

    Hello,
    I am running T code KE5Z. I get a line item. When I double click on the same, I can't see the oriegnal document and the system gives an error message as below
    'The original document cannot be displayed'
    Kindly advice.

    Dear Sir,
    Please check the following
    Mintain Plan versions.
    Select 0 ( plan/actual version)
    Selcet settings for profit center accounting
    check whether you have check the boxes of "on line transfer" and "line items"
    If it is not check, please check and see you can see your report.
    Regards
    Harikishan

  • Balancing field "profit center" line item 001 not filled

    Dear Gurus,
    I am trying to post an vendor invoice in fb60 , but i am getting the above error message.
    The g/l account involved in the transaction is related to purchase price variance.
    Can somebody help me what could be the problem.
    Cheers
    Balaji

    The same issuse what i have faced at the time of document spliting n case of miro with debit note
    pls go through the following examples waht  i have implemented
    SOLUTION:BY MAINTAIN SPLIT RULE THIS IS SOLVED AS FOOLOWS
    PATH:SPROSPA REF IMGFAGLBUSINEE TRANSACTION--DOCUMENT SPLITINGEXTENDED DOCUMENT SPLITING-
    DEFINE SPLITING RULE
    METHOD :   SPLITING METHOD: TRANSACTION :BUSINESS TRANSACTION: VARIANT  :  VARIANT
    Z000000012 PRIL SPLIT          0000      UNSPECIFIED PosTING    Z002    Vendor Invoice/Document/Credit Memo
    BY SELECTING THE ABOVE1 AND DOUBLE CLICK ON ITEM CATEGORYS TO BE EDITED.THERE ACTUALLY CATEGORY MAINTAIEND FOR
    TDS VENODR LIKE THAT BUT WE FACED THE PROBLE WITH ARTICLE AND PROFIT CENETRE.THERE WE HAVE MAINTAINED CATEGORY
    FOR ARTICLE LIKE

  • Balancing field profit centre line item 001 not filled

    Hi Guru's,
    am facing  payroll posting problem system throwing error as Balancing field in profit centre line item 001 not filled  i have checked every thing is correctly maintained and please guide me where i have gone wrong and where exactly i get  this line item to check please help me in solving my problem, as it is urgently required
    thanks in advance
    chaitra

    Balancing field "Profit Center" in line item 001 not filled
    Above error is coming due to splitting .Try to do the following process
    First check the line item 001 and get the GL no for which GL you are getting the error.
    Ask your FI persons, what is the default Profit Center for that company code.
    Goto Tcode FAGL3KEH and enter the company code......enter GL code and Default profit center in the last column.
    Before doing this check the Business Area in IT 0027 and IT0001.Make sure that same Business Area in these ITs.
    Mohan

  • How to delete the Cost center line item data

    How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
    Is there any way to delete the line items in that cost center.
    Can data archiving & deleting can help us..........
    does it have any effect over other cost center data....
    any input needed.........
    regards
    rajesh

    Hi,
    i found 2 reports for you:
    1) CO_TOTAL_WRI - Archiving CO Totals Records   
    2) RKCOITW1     - Archiving CO Line Items: Write Program        
    from 2) is a linlk to customize archiv-parameters
    -> start it with transaction se38 / sa38
    A.

  • Archiving  & Deleting the Cost center line items

    My requirement is to delete the line items in the cost cneter as of today, but when i tried to archive & delete the Cost center line items using CO_item,i aam sucesfull in deleteing the past data, but the data of the last month and currenct month i was unable to ........
    when i tried in the spro>img>controlling>general ontrolling>archiving>prepare archiving for co line items
    i set the resident time to 0,but i was unable to delete the line items.what colud be the reason and what is the way to delete the currenct data also from the system.
    your earlier reply surely appreciated .......

    Hi Rajesh,
    I think SAP help says that the period for which you are planning to delete or archive data may have to be locked.
    Check the following links:
    For Archiving
    http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e55ec462a11d189000000e8323d3a/frameset.htm

  • Archiving cost center line items for current period

    Hi,
    I was not able to archive & delete the cost center line items for current period.I was succesfull in deleting the past line items of the last periods.
    Raj

    Hi Rajesh,
    I think SAP help says that the period for which you are planning to delete or archive data may have to be locked.
    Check the following links:
    For Archiving
    http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e55ec462a11d189000000e8323d3a/frameset.htm

  • Data Target for info source 0EC_PCA_3 (Profit Centre Line Items)

    I have brought info source 0EC_PCA_3 into my system from Business Content (Profit Centre Line Items) but I'm unable to find any update rules or the target for this info source?
    Many thanks for your help.
    Matt

    Have you collected the object properly. I am please take the mentioned datasource and collect the object with dataflow before and afterwords in t-code RSORBCT. Cross check the collection for infocube, TR and UR and then start installation.
    Regards
    Pankaj

Maybe you are looking for

  • IPhone - Support for wired remotes

    I have been looking all over the place for a wired remote for the iPhone 3G with no luck (and yes I have looked through this forum for an answer before asking my question). I have attempted to use three wired remotes from my previous iPods, but two o

  • How to change the width of the variable screen?

    Hi like in the subject mentioned i need to know how i can change the width of the variable screen.... right now i have to scroll if i want to see the right part auf the variable screen... maybe i can change the width with css?

  • Attachment access through smartforms

    Hi, I have a requirement in smartforms, like I need to open attachments of a word documents from smartform output which is a PDF. I would like to provide hyperlinks in smartform output, if which is clicked then saved word documents should be called a

  • Error Extracting data from a STRUCTURE in SELECT statement

    Hi, I have an SAP defined structure BIW_KNA1_S which has been enhanced with 2 fields (ZZS1 and ZZS2). I need to populate these 2 fields with data from the 2 SORT fields from ADRC table. I tried the following code but i do not get any output. This pie

  • Retouch with the Clone Stamp tool

    This question was posted in response to the following article: http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-760aa.h tml