Reposting the default results for problem vi

note:there is no results on the second graph but it is definitly reading something because auto scale jumps around in sink with scaled data vs time
"if you could look at the prog.s attached and if you can explain why i am unable to read the data output from "scalled data vs seconds" into tone measurments.
it must have something to do with the conversion from the cluster of 3 elements to the DBL waveform can anyone see the mistake in the conversion!!""

Your data are transposed, that is your 2D array is a Nx1 matrix where you expect an 1xN matrix. There are two ways to solve that problem:
1 - you can transpose your 2D array using the "Transpose 2D Array" primitive located in the Array palette or ... a better solution
2 - You can extract the signal array as a column instead as a row (which it is by default). To do so connect a constant with value 0 to the lower terminal (index(col)) of the Index array primitive that feeds the data to your Build Waveform.

Similar Messages

Calendar sync problem: "the default service for your device's calendar has changed..."

When I go to sync, this window pops up: "The default service for your device's 'Calendar' has changed since the last time you synchronized. Click OK to use your new default service and combine your data, which might duplicate some entries. Click Cancel to stop...."
I haven't changed a thing. What's going on? I don't want to get duplicate entries.

Yes, I sync with Outlook. From what I understand, your default service should be your e-mail address for both mail & calendar.Spell Check

What's the Default Password for Logging into huawei switches?

I was wondering if I bought the Huawei switches,
what’s the Default Password for Logging into them? so many people may have the same question that if bought a Huawei switch, what's the default password for logging into the switch? and maybe different kind of switches have different kind of passwords,
so maybe all of us wanna know them clearly.
Here, i'll tell you.
As for the bootrom default code:
Huawei S9300 V100R006 and the earlier version is 9300
Huawei S7700 V100R006 and the earlier version is huawei
And you can log into
http://www.huanetwork.com/blog/whats-the-default-password-for-logging-into-huawei-switches/ for more information, really useful.

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

Anyone can help to advice how to solve this issue ?

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How can I get the default value of a particular preference programatically. I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com

Error while building the default domain for intigrated weblogic server

Hi,
An error occurred while building the default domain for integrated weblogic server
log file contains fallowing details about error
"C:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Oracle\Middleware\jdeveloper\MyWork\system11.1.1.5.38.61.26\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
wlst >
wlst > CLASSPATH=C:\Oracle\Middleware\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\Middleware\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\Middleware\jdk160_24\lib\tools.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic_sp.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\Middleware\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\webservices.jar;C:\Oracle\Middleware\modules\org.apache.ant_1.7.1/lib/ant-all.jar;C:\Oracle\Middleware\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar;;C:\Oracle\Middleware\oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\adf-share-mbeans-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\adfscripting.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\applcore-diagnostics-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\mdswlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\auditwlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\igfwlsthelp.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\jps-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\jrf-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\oamap_help.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\oamAuthnProvider.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap_help.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ovdwlsthelp.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\sslconfigwlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\wsm-wlst.jar
wlst >
wlst > PATH=C:\Oracle\Middleware\patch_wls1035\profiles\default\native;C:\Oracle\Middleware\patch_jdev1111\profiles\default\native;C:\Oracle\Middleware\wlserver_10.3\server\native\win\32;C:\Oracle\Middleware\wlserver_10.3\server\bin;C:\Oracle\Middleware\modules\org.apache.ant_1.7.1\bin;C:\Oracle\Middleware\jdk160_24\jre\bin;C:\Oracle\Middleware\jdk160_24\bin;;C:\Oracle\Middleware\wlserver_10.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > CLASSPATH=C:\Oracle\Middleware\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\Middleware\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\Middleware\jdk160_24\lib\tools.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic_sp.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\Middleware\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\webservices.jar;C:\Oracle\Middleware\modules\org.apache.ant_1.7.1/lib/ant-all.jar;C:\Oracle\Middleware\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar;;C:\Oracle\Middleware\oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\adf-share-mbeans-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\adfscripting.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\applcore-diagnostics-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\mdswlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\auditwlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\igfwlsthelp.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\jps-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\jrf-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\oamap_help.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\oamAuthnProvider.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap_help.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ovdwlsthelp.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\sslconfigwlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\wsm-wlst.jar;C:\Oracle\Middleware\utils\config\10.3\config-launch.jar;C:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbynet.jar;C:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbyclient.jar;C:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbytools.jar;;
wlst >
wlst > Initializing WebLogic Scripting Tool (WLST) ...
wlst >
wlst > Welcome to WebLogic Server Administration Scripting Shell
wlst >
wlst > Type help() for help on available commands
wlst >
wlst > Creating Default Domain
wlst > Reading template: /C:/Oracle/Middleware/wlserver_10.3/common/templates/domains/wls.jar
wlst > Setting Name to 'DefaultServer'
wlst > Setting ListenAddress to ''
wlst > Setting ListenPort to 7101
wlst > Setting domain administrator to 'FAAdmin'
wlst > Setting domain password.
wlst > Problem invoking WLST - Traceback (innermost last):
wlst > File "C:\Oracle\Middleware\jdeveloper\MyWork\system11.1.1.5.38.61.26\o.j2ee.adrs\CreateDefaultDomain.py", line 59, in ?
wlst >      at com.oracle.cie.domain.script.jython.WLSTSecurityPrincipal.set(WLSTSecurityPrincipal.java:70)
wlst >
wlst >      at com.oracle.cie.domain.script.jython.WLSTSecurityUser.setPassword(WLSTSecurityUser.java:33)
wlst >
wlst >      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
wlst >
wlst >      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
wlst >
wlst >      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
wlst >
wlst >      at java.lang.reflect.Method.invoke(Method.java:597)
wlst >
wlst >
wlst > com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: java.lang.Exception: The password must be at least 8 alphanumeric characters with at least one number or special character.
wlst >
rohit

Hi,
you see that message: "The password must be at least 8 alphanumeric characters with at least one number or special character." ?
The password: The weblogic password you provide when prompted
must be at least: minimal condition for secure passwords enforced on WLS by default
at least 8 alphanumeric characters: no 7 but eight or more characters
with at least one number or special character: password should have a number in it or an "@" "-" or similar
E.g.
weblogic1
is one password option that would meet that requirement
Frank

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

How do I change the default locations for the iTunes music and iPhone back-up folders?

My computer's hard drive is partitioned, with one partition having all of the Windows system files, and the other having all of my documents, music, videos, etc. When I installed iTunes, it automatically created its music and iPhone folders on the Windows partition. I've been able to change the default save folders for other programs to the second partition, but I'm having troubles finding this option in iTunes (I even went back and re-installed it to see if I could find it that way, but no dice). Is there a way to change the default folders for the iTunes library and iPhone files? It takes up A LOT of space on my Windows partition, so it would be very great to get that moved over.
Thanks!

You can't selectively move individual folders withing the iTunes folder, but you can move the entire folder to, say, an external dive. To delink the iTunes application to the new library location:
Open iTunes while holding down the Option key (Mac) or Shift key (Windows).
In the resulting dialog, click the Choose Library button.
Select the iTunes folder you moved to the external hard drive.
Click Choose (Mac OS X) or Open (Windows) and then choose the iTunes Library file inside .

How to make scim-bridge the default inputmethod for QT application?

I am using gnome with SCIM. I installed scim-bridge for QT application, but xim is the default IM instead of scim-bridge.
I put these into ~/.bashrc or ~/.xprofile or ~/.initrc but it didn't work. xim is still the default IM for QT. You must right click the input area, and choose scim-bridge for input menthod
XMODIFIERS="@im=SCIM"
QT_IM_MODULE="scim-bridge"
or
XMODIFIERS="@im=scim-bridge"
QT_IM_MODULE="scim-bridge"
They both won't work.
The reason why I must use scim-bridge instead of xim mode of SCIM, is because in xim mode the input panel can't follow the cursor.
thx

struq wrote:Did you add "export" before each line?
That's the problem.
Thank you!

Vista - how do you make iTunes the default player for audio files?

Having started using iTunes on a new Vista PC, I've found that it defaults back to Windows Media as the default audio file player every time the machine is rebooted.
But worse than that, I cannot find any option to make iTunes the default player for MP3 files - under the Vista settings, the ONLY option offered is Windows Media: there is not even a box to tick for iTunes.
Have others found this? Is there any way around this?
(I thought that Microsoft was legally precluded from making these kind of enforced settings now???)

Although I now seem to have successfully made iTunes the default player for audio files, iTunes has started putting up this message:
"The iTunes Music Library file cannot be saved. You do not have enough access privileges for this operation."
A quick scan of the forum shows this problem has come up quite a few times, but I'm far from clear if there is a definitive answer/solution. I am the administrator for the computer. It sounds worrying that the Library file is not being saved - should I be worried?

How can I change the default application for a content type?

Running a version of Linux, the default application for PDF files is "Use Document Viewer (default)", which appears to be /usr/bin/evince. I'd much prefer to use /usr/bin/okular; how can I change the default. This question is NOT about how to change the function that is automatically applied when I access a link, in this case "Preview in Firefox", but rather to the default application that I can select when I download a file being viewed in Firefox's previewer.

This is real progress, a solution to the problem as posted. The command:
xdg-mime default okularApplication_pdf.desktop application/pdf
makes okular the default.
However when I added okular to the choices for applications in:
* Edit>Preferences>Applications>PDF
the popup box that appears when I click Download on the preview page changed. The pulldown menu that appears next to "Open with" used to have 3 entries:
# Document Viewer (default)
# Acroread
# Other
Now it has only 2:
# Okular (Default)
# Other
I'd like it to read
# Okular (Default)
# Acroread
# Other
How can I control the entries in this pulldown list?
Also, how can I make the default choice in the popup box be
* Open With <whatever> , rather than
* Save File ?

Can I set the default locale for jvm

Hi,
Can I set the default locale for jvm?
How to do it?
Pan

My windows default locale is chinese .I have thought of your opinion. But in
windows nt , if I change the locale , all the environment will be
destroyed(just like reinstall it , it's difficult for me) . So , Is there
any other approach?
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Did you try to change the locale in the Windows control panel?
(Control panel -> Regional Options -> Your locale)
Pan YangBin <[email protected]> wrote:
I have tried changing this system property and other properties such
as -Duser.language=en -Dfile.encoding=Cp1252 , but all these properties
did
not changed, you can get this infomation from the log file .Maybe these
system properties are readonly.
Thanks very much.
Pan
Chris Halstead <[email protected]> wrote in message
news:[email protected]...
Try adding -Duser.region=US to the java command line used to start
WebLogic...
-chris
"Pan YangBin" <[email protected]> wrote in message
news:[email protected]...
Hi,
The problem exists in my project still exist.That is it.
When I did not set weblogic.jsp.encoding to GB2312 in my web
application(web.xml), and when the jsp file contain's chinese , the
output
will be error(error chinese) .And when I did not set it , the output
is
correct, but when I use request.getParameter("SomeFormElement")(theelement
inputed chinese), the return value is error(still chinese error).And
when
I
am in windows nt english version and do not set this property, all
these
two
problems dispear. And I try to compare the java files those were
generated
by weblogic from the jsp file , there is only two additional clause
in
the
java file. That's it:
((weblogic.servlet.jsp.JspWriterImpl)out).setEncoding("GB2312");
response.setHeader("Content-Type", "text/html; charset=GB2312");
(the web.xml has <context-param>
<param-name>weblogic.jsp.encoding</param-name>
<param-value>GB2312</param-value>
</context-param> to be set
So, I think maybe it works well if I change the default locale toenglish.
And unfortunately, your method is also failed.(I have to use weblogic
in
chinese environment)
Would you please help me to solve this problem?
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Try java ... -Duser.language=en ...
or mode con cp select=437 in the command prompt before running
weblogic.
Pan YangBin <[email protected]> wrote:
I'm using weblogic server 5.1 sp6 in chinese environment, and I
want
weblogic compile my jsp with en_us locale . So I can't use
Locale.setDefault(new Locale(...)) to set the default locale ,butI
really
want someway configure.
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Locale.setDefault(new Locale(...)) ?
Pan YangBin <[email protected]> wrote:
Hi,
Can I set the default locale for jvm?
How to do it?
PanDimitri
Dimitri
Dimitri

Were are the default settings for the screen resolution

?

The default resolution for any LCD display is usually it's maximum, which is the resolution at which the display is sharpest (for lower resolutions, an LCD display as to interpolate which results in a slightly fuzzy display). The maximum resolution for the built-in LCD for all models of MacBook (not the MacBook Pro) is 1280 by 800.

How can I permanently enlarge the default size for pop-ups?

I use several sites that employ pop-ups. The default size is too small, so I have to manually enlarge each pop-up. How can I set the default size for pop-ups to a larger size. I don't want them maximized, just larger than the default.

A pop-up should fit normally unless you are zooming images or text or increasing elements otherwise.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Reposting the default results for problem vi

Similar Messages

Maybe you are looking for