Repoting Server: Which Management Server manage the reports in this case of MS failure?
If I have 2 MS "server1" and "server2", and server1 is the RMS emulator.
When i install "server3" with the Reporting Role and select "server1" how management Server.
What happend when server1 is turn off? Does Reporting work?
SQL Server provides failover clustering support so that you can use multiple disks for one or more SQL Server instances. Failover clustering is supported only for the report server database; you cannot run the Report Server service as part of a failover
cluster.
To host a report server database on a SQL Server failover cluster, the cluster must already be installed and configured. You can then select the failover cluster as the server name when you create the report server database in the Database Setup page of
the Reporting Services Configuration tool.
Although the Report Server service cannot participate in a failover cluster, you can install Reporting Services on a computer that has a SQL Server failover cluster installed. The report server runs independently of the failover cluster. If you install a
report server on a computer that is part of a SQL Server failover instance, you are not required to use the failover cluster for the report server database; you can use a different SQL Server instance to host the database.
please refer to:
http://msdn.microsoft.com/en-us/library/bb630402.aspx
Thanks
Mahmoud: [email protected]
Similar Messages
-
I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support -
The server was unable to save the form at this time. Please try again - tried the trust standards...
2013 standard sharepoint server. Content DBs were on a Trial enterprise server and copied over to standard server. All was good on trial server.
there are 8 sites on server, 2 of the sites cannot create or edit items, they get "The server was unable to save the form at this time. Please try again"
googling around i tried everything. restarted search host controller, checked ram usage (8gb free), manage content types, iisresets, edit the web.config file ( add things for ram, search host, etc), no alternate access mappings, .net HTTP activation, rebooted
server... I'm sure i missed some.
The server is new install, all but the August HF CUs. Trial server the content DBs came from is at same level.
It is not a server level issue as the other 6 sites are fine. its something with just 2 sites.
kinda stuck here...
Thanks,
Scott<-With the USL Logs were hard to track down what was happening, though I think it was too do with /_vti_bin/client.svc/ProcessQuery.
I did the Enable/Disable Anonymous Access on the Directory with no luck.
Brought up Fiddler and Saw that I was getting 401 and 500 Errors on
GET http://team.intranet.eandm.com/it/_vti_bin/client.svc/ProcessQuery HTTP/1.1
So it had something to do with Permissions. I checked the Authentication and the sites that worked had Forms Auth Enabled, and the ones that didn't, didn't have forms Auth enabled. Enabling it manually was no go.
I then went though the web.config on the working and non-working sites and there were some differences. The Authentication was Forms on the working site, Windows on the nonworking. There was many things not present. httpModules section was missing,
Many of the Microsoft Identity /Authentication lines etc.
So I Basically took the web.config from the working site and copied it to the non-working site preserving the following line from the original web.config:
<machineKey validationKey="{key}" decryptionKey="{key}" validation="{hash}" />
After that I had Security Issues, Though I think this was Caused by the July 2014 CU making everything use the Microsoft Identity parts, where as the server I was porting form had the sites created before the July 2014 CU. (though both were at the same level)
Even though all of the users were present in the site security, I had to Drop and re-add them to every site/and list with special Perms.
With the Security Fixed, I no longer received the Error "The server was unable to save the form at this time. Please try again"
Knock on wood its all functioning fine. -
Error:- The server was unable to save the form at this time. Please try again.
Hi,
I have SP 2013 intranet sites.
I am trying to edit the list item in site and getting the error "The server was unable to save the form at this time. Please try again."
I read many article on this forum. to chck web.config file, to restart
“SharePoint Search Hosting Controller” But no help.
Still i am getting this. what could be the reason now.
Please provide the resolution. I am trying to resolve this from last two days.
Thanks,
RakeshNormally, there's something wrong with the form responsible for editing list items. Is it customized? If not, you could use the free SharePoint Designer tool to delete the current form, create a new one (wait some time before caching issues are solved)
and you should be good to go. If it is customized, contact the team responsible for managing it.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
The server was unable to save the form at this time. Please try again
Having created a new custom list (even with only a text field) I am unable add new items to the list - the error message is Unexpected
response from server. The status code of response is '0'. The status text of response is ''. when in 'quick edit'.
If I try to add or modify an item in the list by clicking 'add new item' I get "The
server was unable to save the form at this time. Please try again."
I have restarted the Sharepoint Search Host Controller server but to no avail. I have 24Gb RAM for this server so it's not a
memory issue (8Gb available). I have also tried from various browsers including Chrome and Safari - still the same error message.
This error only occurs on lists. I can edit document properties in a library and have no problems with calendar entries.
There are no entries in the event viewer, so where do I need to begin looking to find out what is (or rather is not) happening?One thing I noticed in SP 2013 is that if your list has unique permissions and a user/group has permissions only on that list and has limited or no access at the site level, then you run into this error: "The server was unable to save the form at this time.
Please try again."
This can be resolved by either giving that user/group atleast read access at the site level or in my case I had to create a new permission set (since we cant update limited access permission set) which is same as limited access but with the additional permission
of "Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site."
I am not sure if this is a bug or as per design, but not allowing a user who has needed permissions at the list level but limited access at site level doesnt seem right. Never ran into this issue in prior version of SharePoint. I tested and this additional
permission doesnt seem to violate any security at site level. But implement this at your risk. No guarantees provided and not responsible for any issues with this implementation if any. -
I would like to activate open item management what is the impact of this
HI,
i would like to activate open item management what is the impact of this FAGL_ACTIVATE_OP program
i am not under standing why this many entries are happening for this i have tested in DEvelopment
40 SERVICE TAX-SHE CESS-RECEIVABLE-INPUT SERVICES
50 50000029 MEDICAL REIMBURSEMENT (Original entry)
system posted documents
2nd entry
50 27051306 SERVICE TAX-SHE CESS-RECEIVABLE-INPUT SERVICES
40 99900001GL Offset Account
(TExtTransfer Posting: Activation of Open Item Manageme)
3rd entry
40 27051306 SERVICE TAX-SHE CESS-RECEIVABLE-INPUT SERVICES
50 27051306 SERVICE TAX-SHE CESS-RECEIVABLE-INPUT SERVICES
(TextTransfer Posting: Zero Balance per Acct Assignment)
4th entry
document no was happend
Clearing document with out Lint items
5th entry it is ok it is new open balance
40 27051306 SERVICE TAX-SHE CESS-RECEIVABLE-INPUT SERVICES
50 99900001 GL Offset Account
(TExt Reposting for Open Item Activation)
can any body give some explanation
Regards,
madhavYou would have to purchase a second subscription since one subscription allows for only two active installations of which only one can be in use at a time.
As far as cost goes...
Creative Cloud Plans
https://creative.adobe.com/plans -
How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?
To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck... -
I'm working on JSP that allows the user in this case to add a new restauran
I'm working on JSP that allows the user in this case to add a new restaurant to the database. I have 2 database tables, one being RestaurantTable and containing the columns:
Id (Restaurant Id) type: int (primary key)
Name (Restaurant Name) type: varchar
Address (Restaurant Address) type: varchar
PhoneNumber (Restaurant Phone Number) type: varchar
Category (Type of Restaurant) type: varchar
and the other being Rank and containing the columns:
Value (Restaurant rank number) type: float
Id (Restaurant Id same as in the RestaurantTable) type: varchar
Since all of my restaurants which are already in the database have ideas, if a user were to add a restaurant I want my JSP to give it the next Id that follows. For that I have created a SQL sequence which is rest_id_seq.
There error I'm getting is : Invalid column type
I understand that the value for Id must be an integer because that is what I defined it as when I created my table, but I don't understand anyother way to do it then to put the sequence in as it's value.
I'm really confused as to what to do. Any help would be appreciated. Thanks
I'll post again with my codeOk I really don't get why I can't post my code on here, I've been trying over and over again. I cut and paste my code and put it between and I hit the post button and the page does nothing.
-
I have Adobe Acrobat version 11.0.0 installed with Adobe CC. I cannot download PDFs from the internet (in this case from PubMed National Library of Medicine). If I try to do this I get a popup message saying that "ADOBE ACROBAT NPAPI PLUG-IN, VERSION 11.0.0 NEEDS YOUR PERMISSION TO RUN. I DON'T KNOW HOW TO GIVE THIS PERMISSION OR WHAT TO DO. CAN YOU PLEASE HELP?
What buttons do you get to click on with this message? What browser are you using (e.g. Safari, Chrome, Internet Explorer...)
-
My iPhone 5s fell down and damaged, I've bought it from Canada .
Now I am in Saudi Arabia, and there is no Apple Store here , What is the procedure in this case?The warranty is only valid in the country where you bought the phone. To get it serviced by Apple, you'll have to bring it back personally, Apple does not ship internationally.
If you can't bring it back to Apple in Canada, your only other chance is to search for a 3rd party repair shop. An Authorized Apple Service Provider in your country will not service the phone, sorry. -
I tried to down load photos to my computer, but accedently click update setting as well. Now the phone is frosen and the computer shows that I have to restore the phone, in this case I will loss all the photos. right? what should I do?
Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
--- End of inner exception stack trace ---Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
have added name to Sql server , users cannot access the report, getting error message ,
I have give all the permission to this users, so why this users still cannot look at the report,
and getting error message,
An error has occurred during report processing.
cannot create a connection to data source Ax live
for more information about this error navigate to the report server on the local server machine or enable remote errors.
can some please help me what this message means,
I really appreciate it
thanks In advanceIf "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question. -
Server Threw Exception when Exporting the report as PDF
Hi ,
I am developing a .Net application , In my application referring to the .rep file which is created using the Business Objects Desktop Intelligence as below
objBO = new busobj.Application();
objBO.Logon(strUserName, strPassword, strServerName, strConnectionMode,false, false);
objBO.Visible = false;
objBO.Documents.OpenFromEnterprise("PfILS Document.rep", strDomain, BoEnterpriseFolderKind.boFolder);
After passing the values to the variables of the.rep and refreshing like as below
objBO.Application.ActiveDocument.Refresh();
when I tried to save the generated report as .pdf ..
objBO.Application.ActiveDocument.ExportAsPDF(@"c:\" + Report0101010 + ".pdf");
I am getting the following issue
The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))
and the application fails to export the report to pdf document
Please help me , what will be root cause of this issue
Thanks
Babu
Edited by: Babu Lakshmikantham on Oct 28, 2009 9:18 AMHi,
World you like to have a look at the sample [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60b54507-de66-2b10-95b8-a89015297027]?
Hope that helps!
Thanks. -
Table which contains name of the report generated from table
Hello everyone,
Is there any table which stores the report names that are created from table.
For example if my table name is 'ABC' a new report will be created for table at run time '/1BCDWB/DB/ABC'.
I also need to have table names, which stored the values when a layout is changed
For example if I have ten fields in my table, first time ill choose 5 fields, second time ill change the layout and choose 10 fields and ill save the layout.
If any Function modules are there please let me know
Please let me know, if anyone has details.
Thanks,
Gayatri.
Moderator message : Duplicate post locked. Continue with the thread - [Name of the table which stores report contents and layout changes|Name of the table which stores report contents and layout changes;.
Edited by: Vinod Kumar on Jun 14, 2011 3:42 PMHi,
Thanks for reply.
I know about ttxfp and tnapr. but none of the two table contain form name with its description. actully I m looking for a table which contain form name with there desription. please if you have info regarding this, Do share with me . this is really urgent
regrads,
Ruchika saini
Maybe you are looking for
-
Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs. Usually this is because there might be songs where the artists has other artists in the song. How can I compile all of th
-
Hi experts, Please check it my code . in this procedure first cursor only inserted into t1 temp table not inserted second cursor please check it and modified the my code. i want inserted parent child relation table like bellow parent child a b a c a
-
i want my 199 dollars refunded as im unable to open adobe standard 1X
-
Ignoring error in afterCompletion.
I just tried to force an ejbStore on an entity by: (in weblogic-ejb-jar.xml) <persistence-descriptor> <is-modified-method-name>isModified</is-modified-method-name> <delay-updates-until-end-of-tx>false</delay-up
-
Channel in non-standard location & char set
Hi folks, I have two problems. I'm useing Portal Server 3, and have a custom channel which I would like to display in the location of the small logo (in the �banner�). I have no idea hoe to do this, I presume I could put it there by defining a [tag:m