Reprint Storage Unit Label

How can I reprint a storage unit label (without having to create a new TO)? Assume that the label is damaged and I have to print a new one and replace the damaged one.
Thanks.

LT32 prints SU label according to open transfer orders that contain the SU. This is not what I need. I need to reprint the label for an existing SU without having to use a TO. The material is not moved at all.

Similar Messages

Storage unit labels along with pallet labels in wm

Hello,
could you please explain how to generate storage unit label along with pallet label in wm. for example if 1pallet contains 4 boxes and each box will have20 bottles then we need to print pallet label for 4boxes and unit label for each box with 20 bottles information.
Thanks
Regards,
Pavan Kumar

Hi Pavan,
Based on your requirement and as far as standard SAP are concern there is no form which will help to generate the label in the above format. You need to take the help from development team who can design the format using SMARTFORM functionality as per your requirement. once the form is ready you can assign the print code and the SU lable form to below mentioned node. which will print the label on the printer specified
SPRO ---LE---WM ---Storage unit ---Define print control
additionally have a look on the below mentioned SAP standard link which will give you an idea about the printing of SU
Printing SU Documents Manually - Warehouse Management System (WMS) - SAP Library
Let me know if you need any further information

To print transfer order and storage unit labels in lt31

Hi SAP Gurus
1>Is it possible to print Transfer order and Labels simultaneously in tcode LT31(At a time when LT31 is executed
If yes please guide me the selection parameter in Tcode LT31 and if any configuration required in the background
2>Is it possible to print Transfer order and storage unit labels automatically when MIGO is posted.what are the settings required
My client raised a query that before he was able to print both once Migo is posted .But now only trnasfer orders is getting printed but not SU.
Requesting to help in this issues
Thanks in advance
Regards
chandu

you need to define the print control parameter in the customizing and whether you can print both(SU & TO) is depend on the print code which you specify in the setting under
LE----WM---Activities-----Define print control
After MIGO are you transferring the stock to SU managed storage type , as per STANDARD SAP stock goes to 902 which is Non SU managed so here you need to tell us the flow and the storage type where stock goes after MIGO also is that storage type is SU managed or not

Storage units

Hello all,
I would like to know the information/particulars diaplayed on storage unit bin labels - i would like to know more about the information displayed on the storage unit labels such as material number, quantity. And also, if a box or a piece is removed from a pallet how would it be updated in the storage unit label.
Thanks,
Maxx.

Hello Maxx,
When you design SU label that that time you will pull all the data relevent for the SU number of material from LQUA table.
Now when you move partial qty of material from one SU the it will deduct the qty from that quant data and update LQUA table. So now it is upto the business whether they wanted to print the label for changed SU or they will manually change qty on label which is already applied on that pallet.
Hope this helps.
Regards
Arif Mansuri

WM-PP losing storage unit number on return

Hello again,
This is not an uncommon problem I am sure! My client has the SU number on the label. We are using WM material staging to pull full SUs into the non SU managed production supply area (stype 100). The required amount of product is consumed. All this is okay. The next step is the problem.
When the material is returned to the SU-managed storage type, the system gives it a new SU number so the label is wrong. Is there any way to keep the old the SU number? Is ABAP my only solution?
Thanks for your advice,
Orla

http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8461b4afa11d182b90000e829fbfe/frameset.htm
Define storage unit management for physical storage types only. Interim storage areas cannot be SU-managed.
What is your process exactly?
1) Is the SU moved to production (interim storage type 100) and they pick up the necessary quantity and SU goes back immedietly (very shrt time).
2) SU is moved to production (interim storage type 100) and it will be there till the parts are consumed for production (long time).
In case of 1) you can consider the use of picking with pick point:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8471f4afa11d182b90000e829fbfe/frameset.htm
In case of 2) I think it's reasonable to reprint the lbels as it was suggested by Hein since who knows what's happned with the SU during that time it was in production area...
Otherwise you have to go to development I think.
Regards,
Csaba

Handling Unit label (V6) - multiple printers configuration

I would like to print the handling unit label (V6) in multiple printers. Currently the condition records are set to plant/Packaging material combination with printing in one printer. I would like to have the ability to print to different printer in HU02 t-code based on userID. Can I configure it based on storage location or userid? Thank you.

Are you using WM+HUM or only IM+HUM?
In OMJ3 you can define printer by Storage Location,
in OMLV you can defin printer by WM organizational levels (storage types), movement type etc.
You can use NACE t-code to set the output type you want in addition to MDoc printout.
Can you explain your config, when are you printing your HUs at the moment?

Can i print Storage Unit number as barcode in SAP??

can i print Storage Unit number as barcode in SAP and also Scan the same number in RF devices.

Hello,
yes you can, the solution depends on which printer do you have, if you want to print on laser or label printer.
Please explain your requirement in more details
Christophe

Set storage unit number (SU)

Dear all,
I have a business scenario that barcode label is printed before goods receipt from production. The phyiscal cartons from production will be placed onto the pallet. Once the pallet label is full, the barcode code label is printed and scanned for confirmation of process order, and then following by goods receipt.
Since, I am using WM in particular Decentralized WMS, the system will generated TO automatically upon GR. As you know, storage unit number will be generated during TO creation. As we want to capture the barcode pallet label in the SAP system as our SU number. I wonder there is any user exits or other things that allow for setting the SU number from the barcode label number.
Ideas?
Thanks in advance.
Cheers.
Tom

Hi,
May I know if the question still exists or not? If so, please reply it. Thanks a lot.
BR

Storage unit number in RF

Hi all, I`m using the cycle counting transactions from the std RF functionality. I was wondering if ther is any way to have the system automatically determine the storage unit number that is in the storage bin. Since I am handling fixed bins for packing, once that the stock enters to this bin, we open the pallet and lose the pallet label. This will make very hard for the operator to enter the storage unit number when it is asked in transaction LM58, LM60, etc..
Thanks in advance!
Marcos

Hi,
Check the data in the Transfer Order, the item (such as the quant number, storage bin or storage type) does not belong to the storage unit number that you entered.
For more check the link:
http://help.sap.com/saphelp_45B/helpdata/en/c6/f83e194afa11d182b90000e829fbfe/content.htm
Regards,
Biju K

WM- Printing Storage Unit

Hi everyone,
I have a problem while printing Storage Unit from another :
The material is entered in the warehouse number as Pallet in a storage type.
This step generates a Storage Unit number.
From this Pallet and this Storage Type, I place the material in another storage type (box) with another Storage Unit (box).
The movement i'm using is a copy of the 501, and the system does generate another Storage Unit Number for each box from the Pallet.
The only problem is that it does not print the Storage Unit Forms as it does for the first storage units.
The customizing is the same for the movement and the printing parameters, and I don't understand why it does not work.
If someone could help me with that...
Thank you very much.
Remi

Hi Vittu,
In order print the labels, you need to have a label program. You can even use the standard SAP label program. This you may have to work with a developer. If you have your label printing program is set, then you can assign the label print form according to your need. You can either setup the label form based on the Source/Dest. storage type or based on the movement type or for the entire warehouse.
This can be setup to print automatically when the TO is generated.
Hope this clarifies your question. Please let me know if you need any specifics.
Thanks.
with regards,
Muthu Ganapathy.

Problems when creating a transfer order for moving storage units

Hi,
When creating a TO for moving storage units with FM FU L_TO_CREATE_MOVE_SU i got problems when the storage unit consist of 2 items. The message 'Warehouse number does not exist (new selection required)'
is displayed. When i use the FM again after this message then the TO is created correctly.
When i debug the FM for 2 items is see that LEIN-LGNUM is empy en when performing:
PERFORM T300_LESEN(SAPML03T) USING LEIN-LGNUM. and the message E080 is raised.
The perform before this is determining the lein-lgnum (PERFORM LENUM_EINL_CHECK(SAPML03T) USING I_LENUM) but this value isnt passed to the calling program the first time (memory or something????)
Does anyone have a solution for this problem?
Thx in advance.
Kind regards,
John Nijburg

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Unable to confirm transfer order due to error message "enter a storage unit

Hi guys:
I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

Hi Allen...
Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
Pls confirm and revert
Regards
Shiva

Split transfer order on the basis of Storage Unit type(SUT)

Hi,
I got one problem and want the solution for that immediately.the problem is as follows:-
The transfer Order needs to be split by quantity according to the quantity per Storage Unit Type.
I have to do this making chages in the SAP standard user Exit EXIT_SAPLL03A_12 in the program SAPML03T.
Eg.One scenario is provided
Scenario 1: Perform transaction MIGO with a movement type 101 for Outbound Delivery 80000201. Enter a quantity of 15 kgs.
the result should be as follows:
Scenario 1: Check TOs created by going to transaction LT22. Enter Warehouse number 200; Storage type 902. Select the Dynamic Selections button and select Transfer order Item. Double click on Material and enter the material number (W075006). The SUT is 5kg so the expected result is for 3 TOs to have been created.
Means one TO got splitted in 3 TOs.
Please provide me the help.

Hi Vinay,
This can be done purely through customizing. Please check IMG -> Logistics Execution -> Warehouse Management -> Activities -> Transfers -> Processing Performance Data/Split. You will need to define a sorting profile for TO split in where LETYP (storage unit type) can be used as sorting condition. The sorting profile should then be assigned to defined TO split.
Hope it helps.
Have a nice weekend!

Mixing materials with different Goods Receipt date in the same Storage Unit

Hello everybody,
I´d like to know how FIFO strategy would affect to this example:
Adding boxes from one storage unit (pallet) to another storage unit (pallet). Both storage units have different goods receipt dates, so there is a pallet which has boxes with different GR dates.
Would FIFO make difference among boxes inside the storage unit?. As far as I know, when adding stock (boxes) to a handling unit (pallet), the system keeps the oldest GR date and does not create new quant number for the incoming boxes
Thanks in advance for your help

Hi Nagesh,
Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
Regards,
Samuel

External Storage units to be entered in the Creation of Transfer Order

Hi Experts,
We have a scenerio where the business creates the Storage units in advance, creates the PO and assigns ithe SU's to the Purchase Order in the custom table. Then creates the Goods reciept using a BAPI which creates a Transfer requirement. Now while creating the Transfer Order for this material document ,
The main issue here is that the businedd needs that if there are any number of Storage units in the Custom table say 3 SU's then the 3 SU's should be entered in the Transfer Order which is created in the bcakground using a BAPI.
please guide us how todo it
Thanks in advance

Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri

Reprint Storage Unit Label

Similar Messages

Maybe you are looking for