Reprocess the IDOC without using BD87

Can I reprocess an idoc through a zreport in the background. can i use the program behind BD87 and use a submit statement?
But BD87 genertes an output from which you have pick your idoc and reprocess it manually.
Thanks,
krishna.

hi ,
See the status of the record and process the below program using Submit report by passing Idoc number
Program RBDMANI2 for status 51 & 52
Program RBDAPP01 for status 64 ,66
Program RBDAGAIE for status 32 and 69 (Edited IDocs)
Program RBDSYNER for status 26
Program RSEOUT00 for status 30
re-process IDocs failing in 29 status, use program RBDAGAIN.
Prabhudas

Similar Messages

Reprocess the IDOC

Hi,
I am devloping one report which will display some idocs.My requirnment is to reprocess (like BD87) those idoc which are there in error state.So is there any function module or program which i can call in report to reprocess the idoc?Or is there any alternative way to perform the same operation.

Check out function module IDOC_INPUT, which is pretty neat. Specify the IDocs that you want to process in table parameter UNPROCESSED_IDOCS and ignore the other tables parameters IDOC_DATA and IDOC_CONTROL (can be empty when calling the function).
Cheers, harald
p.s.: Problems with reports other than BD87 is that they usually only handle a specific set of IDoc status values (e.g. RBDAPP01 is only for unprocessed IDocs in status 64 or 66, RBDMANI2 for failed IDocs in status 51, RBDAGAIE for edited IDocs in status 69, etc.) - that's why I prefer to use the function module.

Reprocessing the idoc

hi ,
i am not able to reprocess the idoc when the satus is 62 on the inbound side....
how to reprocess the idoc.
what is the program to reprocess the idoc....

hi shyam,
u can first test the inbound idoc using we19, which is a testing tool. To reprocess an idoc u have to go to BD87.
first of all check status code of the idoc at different stages. so that u can track the problem.
Regards...
Arun.
Reward points if useful.

Collecting Idocs without using BPM

Hi Experts,
I am working on a sceanrio, where Idocs are coming from sap and we need to generate a single Flat file out of them.
For this scenario first we need to collect the Idocs and then process them to make a single file output.
To achieve the same I am using the BPM to first collect the Idocs and make a packet out of them and then processs it to generate a single flat file.
Can someone please suggest me that, How can we achieve the same without the BPM.
If yes, how can we do that?
Thanks in advance.
Regards
Pradeep

Pradeep ,
Option 1 : /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
here you collect them as a file and file is picked up and sent to the target
Option 2 :
in WE20 in ERP set idoc package to 50
in XI sender idoc channel - package to 50
XI will receive 50 IDOCs at once...
(courtesy Michal....till then i thought there is no sender idoc adapter )
Option 3 : collect using BPM.
Option 4 : This is what i woould suggest....no need of collecting you can send one idoc at a time generate the file.....why do u want to collect?
Edited by: Tarang Shah on Mar 20, 2009 7:38 AM

How do I transfer music from one iPhone to the other without using a laptop and will I be billed?

How do I transfer music from one iPhone to the other without using a laptop and will I be billed?

Download Past Purchases
http://support.apple.com/kb/HT2519
Or do you mean this...
Old Phone to New Phone
http://support.apple.com/kb/HT2109
Also...
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID

I am brand new to the Ipad. I can't use ICloud unless I upgrade my 10.5 Leopard. Is there a way to sync documents created in Pages to the IPad without using ICloud?

Hello. I am a newbie to the Ipad. I am currently working with an OS 10.5 Leopard MAC. I understand that in order to use ICloud I would need to purchase OSX Snow Leopard and OSX Lion. I am attempting to avoid the expense and to the extent possible sync my IPad with my MAC. I have created documents on my MAC in pages. Is there a way to have access to those documents on the IPad without using ICloud.
A second question concerns web browsing, sometimes you'll open up a page or image and not know how to go back to the previous page. So do I just close and reopen safari altogether or is there another way to get to the previous page.
Thanks for any guidance you can provide.

Actually you can use iCloud with the Mac running OS X 10.5.8. You don't sync the documents - you upload to or download them from iCloud.
You can open a browser on your Mac - Safari is preferred - log into icloud.com, enter your username and password, click on the iWorks icon, click on the Pages section at the top - and then you can drag documents into the browser window to upload files - and you can select a file in the cloud to download to the Mac. I do this on my iMac at work running Tiger 10.4.11. It's kind of slow - and you will get a warning that you may be using a supported browser - but it works.
In any event, you can use iOS file sharing to send the Pages docs to your iPad. you have to connect to the Mac and do this via iTunes.
iWork for iOS: About iTunes File Sharing
Just tap the arrows in the toolbar in Safari to go back and forth. You can open multiple pages using tabs. tap on the + sign to add another tab in Safari.

Regarding reading the data from the files without using Stremas

hai to all of u...
here i have a problem where i have to read the data from the files without using any streams.
please guide me how to do this one,if possible by giving with an example
Thanks & Regard
M.Ramakrishna

Simply put, you can't.
By why do you need to?

I want to upgrade my phone to the 4 or 4s. My macs are still running Tiger. If I bought an iPad 2, could I sync everything to it from the 4 without using a Mac at all, and then be able to iCloud my calendar and contacts, etc?

I want to upgrade my phone to the 4 or 4s. My macs are still running Tiger. If I bought an iPad 2, could I sync everything to it from the 4 without using a Mac at all, and then be able to iCloud my calendar and contacts, etc?

Radiation Mac wrote:
And you must be using a recent version of iTunes on your iMac in order to activate the iPad, So, no.
You don't need a computer to activate a new iOS device anymore. Anything with iOS 5 can be activated over a WiFi network (or cellular if that applies).

Multi-Mapping in IDOC without using BPM ?

Hi ,
Please check ..
Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards
PS

Solved .. Thx every one .
Approache Used :
1. Created mapping with Change signature on target Message type(idoc) with 1..N Occurence.
2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board?

As i had said, I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board? Is there a Fn key combo i'm missing or is the issue more serious then i realize? any and all help and hints would be greatly apprichiated, thanks in advance.
-Powerbook User

The PowerBooks have an F-key that toggles mirrored and extended mode. My PB is loaned out right now but I think it was f7. The keycap has an icon on two overlapping rectangles, as I recall.
EDIT: Yes! Found a pdf of the PB manual it shows F7 is the toggle:

Import roles to the ERM without using the "Mass Role Import

Hello,
I want to know if there is another way to import roles to the ERM without using the "Mass Role Import.
Im'm using SAP GRC AC 5.3
Best Regards.
Pablo Mortera.

Hi.
There is NO other way to import roles..
We need to use only ERM for "Mass Role Import.
Regards
Gangadhar

How to update and insert the records without using Table_comparison and Map_operation?

How to update and insert the records without using Table_comparison and Map_operation?

Use either join or MERGE see this Inserting, Updating, and Deleting Data by Using MERGE

How to list the datasources without use a tnsnames.ora file?

Hi,
I want to use the OracleDataSourceEnumerator class of ODP.Net to list the datasources on which the user can connect.
It's work with a tnsnames.ora on the local station, so good.
But I want use the easy connect naming methode so i have edited the sqlnet.ora file with this:
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
then i have deleted the content of the tnsnames.ora
so my code don't work : none datasource is returned by the OracleDataSourceEnumerator
So my question : is it a way to list the datasources without use a tnsnames.ora file?
Edited by: user13499556 on 17 déc. 2010 08:21

You can check
DataConnectionFile.EnumerateDependants method
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

My macbook froze up. Finger gestures work, but I cant close out of any windows. How do I close out the windows without using the track pad?

My macbook froze up. Finger gestures work, but I can't close out of any windows by clicking on the red "X". How do I close out the windows without using the track pad?

Command + W will close a window. Command + Q will quit a program.

Programming for the mac without using xcode

Hi
I'm very new to programming for Apple platform. I wanted to clear some doubts which is currently standing as a barrier in getting started.
Can I use a text editor (preferably TextMate), Interface Builder, and the Terminal (without using xcode to write & compile) to develop software for the Mac. I have installed the xcode package (~900 mb image).
Can you point me to some resources on terminal commands for compile, debug codes for the mac. (Obj-C, Cocoa api)
Thank You.
Message was edited by: jase21

You can use anything you want to develop software for the Mac. In fact, I always encourage people to start out with tutorials and examples using standard UNIX command line tools like vi and gcc. There are plenty of such getting started tutorials for UNIX and Linux.
At some point, however, the command line is going to get cumbersome. You may want go start writing true Mac applications instead if command line tools. Then it will be time to start with Xcode.

Reprocess the IDOC without using BD87

Similar Messages

Maybe you are looking for