Reprocess XML messages

hi all,
We have some xml message which were succesfully sent from the xi as idoc, however the idoc failed in r/3 system. The status in xi for the xml message is succesful,in SXMB_MONI. we cud not reprocess the messages.
How can i do reprocess the doc.
regards
ab

Hi,
If the Error Occured while posting the Idoc to R/3 just because of any functional Config and if u set that config at functional level . there after if u want to re-process the same idoc means
In R/3 ,You can Use RBDAGAI2 or RBDINPUT to Reprocess the Inbound Idocs with Error status
Regards
Seshagiri
Edited by: N V Seshagiri on Nov 6, 2008 1:28 PM

Similar Messages

Reprocessing of XML Messages with status 003 i.e. Successfully Processed in

Hello Expets ,
I have to reprocess the XML messages which are already in successfully processed state ( 003 ) in ECC without posting the data due to some abap bug how am i going to do it.
Is there any way i can changes the status of the xml message to Manual restart possible or some other way to do it...!
Thanks in Advance

HI,
It's possible with some config change. (Hope your system is not production)
First solution:
The specified item was not found.
Second:
Insert the payload in RWB using test tab and send the data again

Proxy XML message Reprocessing

Hello Experts,
My problem is as follows
1. I get a pay load from PI ( I have written code in the method o post data in ECC say a Purchase requisiton using bapi )
2. If the BAPI fails then i raise a zee exception ( the message is manually restartable )
My problem is that my queue stuck up if i raise a exception what should be the possible solution for the same so as to achive follow thing ,.
1. if my bapi Throws error the xml message should be manually restartable
2. if I raise a exception the queue should not stuck up.
Or any other turnaround welcomed...!
Thanks and regards,

Hello @pawan ,
How do you make the xml message manually restartable ,
I am making it by raising a CX_AI_APPLICATION fault.
but My drawback is that When i Raise the exception and if the Quality of service of message is EOIO and in the queue my First message throws a exception my queue stops .
I just wan't to know will my provider class method in which i have written code to post the data will have a Exception as a parameter or not ? so that it will be caught and my queue won't stuck up and still my message will be manually restartable.
Still Waiting for comments experts ..!

XML Message Body Selector in Automation

Hi,
I'm having some trouble implementing a XML Message Body Selector in an automated task. I'm running OSM 7.2.0.7 in a Unix environment and using Design Studio 7.2.1.
I'm sendind in my request to an external system a request tthe following string: OSM-TaskName-%{CARTRIDGE_VERSION}
<Request>
    <Header>
        <dueDate>20131128</dueDate>
        <application>OSM-MSS_Lookup-1.0.0.0.5</application>
    </Header>
</Request>
The response of MSS is:
<Response>
    <Header>
        <dueDate>20131128</dueDate>
        <application>OSM-MSS_Lookup-1.0.0.0.5</application>
    </Header>
In the selector I've tried different XPath expressions:
Select:
/*[local-name() ='Response']/*[local-name()='Header']/*[local-name()='application']/text()
*[local-name() ='Responset']/*[local-name()='Header']/*[local-name()='application']/text()
//*[local-name() ='Response']/*[local-name()='Header']/*[local-name()='application']/text()
/*[local-name() ='Response']/*[local-name()='Header']/*[local-name()='application']
*[local-name() ='Response']/*[local-name()='Header']/*[local-name()='application']
//*[local-name() ='Response']/*[local-name()='Header']/*[local-name()='application']
/Response/Header/application
/Response/Header/application/text()
Compare: OSM-MSS_Lookup-%{CARTRIDGE_VERSION}
I keep getting the following error in the log file for the differente selectors:
####<Nov 28, 2013 10:34:31 AM CST> <Info> <oms> <hostname> <SOM_ManagedServer_1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'
> <sceadmin> <BEA1-49AB960B7AE5258D5CC8> <0710a255d6bbb54d:-1d6ed94c:142960580fb:-8000-0000000000026363> <1385656471431> <BEA-000000> <api.e:
        namespace/version: SOM_Cartridge/1.0.0.0.5
        automator type: taskAutomator
        plugin JNDI name: MSS_Lookup.automatedtask.somprovisioning.MSS_LookupReceiverBean
        plugin class name: oracle.communications.ordermanagement.automation.plugin.XQueryReceiver
        run plugin as: oms-automation   receiver:
                type: external
                JMS source: sky/MSS/Product/WebServiceResponseQueue
                message [property|body] selector: JMS_BEA_SELECT('xpath', '/*[local-name() ='Response']/*[local-name()='Header']/*[local-name()='application']')='OSM-MSS_Lookup-1.0.0.0.5'
####<Nov 28, 2013 10:34:31 AM CST> <Warning> <EJB> <hostname> <SOM_ManagedServer_1> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <oms-automation> <> <0710a255d6bbb54d:-1d6ed94c:142960580fb:-8000-000000000002650a> <1385656471454> <BEA-010061> <The Message-Driven EJB: MSS_Lookup.automatedtask.somprovisioning.MSS_LookupReceiverBeanMDB is unable to connect to the JMS destination: sky/MSS/Product/WebServiceResponseQueue. The Error was:
javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "JMS_BEA_SELECT('xpath', '/*[local-name() ='Response']/*[local-name()='Header']/*[local-name()='application']')='OSM-MSS_Lookup-1.0.0.0.5'"
Nested exception: javax.jms.InvalidSelectorException: weblogic.messaging.kernel.InvalidExpressionException: Expression : "JMS_BEA_SELECT('xpath', '/*[local-name() ='Response']/*[local-name()='Header']/*[local-name()='application']')='OSM-MSS_Lookup-1.0.0.0.5'"
I would appreciate any help or ideas.
Cheers

Hi,
Could you confirm on below:
1 ) Are you using multiple automation plug-in external event receivers in the same automation task ?
2 ) And are you having the default Correlation Message property set to 'JSMCorrelationID' in external event receiver?
If your answer for the first question is No, they i would suggest to use Correlation XML Body as
*[local-name() ='Response']/*[local-name()='Header']/*[local-name()='application']
The value of the field(application) in request must match the value of the field in response, in your case it is matching. And you will be reading this correlation id in response processing xquery.
Regards
Srinivas

Unable to Execute a Report to send PAN XML messages out of SNC

Hi All,
We are unable to Execute a Report /SCA/DM_TIMESERIES_OUT to send Product Activity Notifications in the form of XML messages out of SNC. We have manitained some Planned Reciepts data in SNC and would like to transfer it out to ECC.
Could anyone help in understanding if we have to maintain mandatory settings before executing this report.
Thanks & Regards,
Sadiq

Hi Pravin,
As per the documentation(http://help.sap.com/saphelp_snc70/helpdata/EN/48/6bdb4767a431cbe10000000a42189d/frameset.htm), we have tried both the manual and automatic features to configure the output from SNC in the form of XML messages.
The manual method gave a message "Time series data for selection is empty" and the Automated method could trigger the XML messages on every incoming message from ECC but we are unable to see the Planned Receipts in that XML messages.
Was just wondering if we can see the Planned Receipt info by changing the settings of this report or by using any other simillar report as the PR info is very important for our development.
Thanks & Regards,
Sadiq

View is not retuning data when creating XML message through workflow

Hi All,
This is a very critical problem for me. I am trying to send an XML message (outbound) through XML gateway. This is done from a custom workflow. The message creation is done from the standard procedure ecx_document.sendDirect. The data for the XML file is taken from two views (whcih are created in a custom schema and have synonym in apps). One view for header and another one for line information (I am creating an XML for a purchase order).
The problem is when the workflow try the first time to create a message, the views are not returning data. So message creation fails. Now, if we restart the workflow after some time, it will work and the message is created. What could be the reason for this sort of a behaviour ?
I am using business events to trigger the workflow. The data in the table/view will be updated by standard POAPPRV workflow activities. The custom workflow is subscribed to a business event raised from POAPPRV workflow, at a certain point. So this will execute when this event is raised from POAPPRV wf. The subscription has a phase value of 99.
Any help on this regard will be much appreciated, as this is a critical issue.
Thanks in advance,
Arun
PS : One more thing : this is happening mostly in the production instance where the number of messages is very high (freqency).

Hello,
With the BAPI_EQUI_CREATE you can only create PM equipments not IS-U devices that why there is no IS Tab .
You have to use the dialog transactions IQ01, IQ04 or the MM transaction, where you can create devices through a movement.
There is objecttype DEVICE (SWO1) with the following methods:
-> Device.CreateFromData (Create Equipment Master Record)
-> Device.Create (Create Equipment Master Record)
-> Device.CreateISU (Create IS-U: Modification for IS-U)
Please check whether you can use method Device.CreateISU for your requirement.
Regards
Olivia

Read XML message from a CLOB

We are currently receiving XML messages from a business partner that goes
through a transformation/parser first to make sure the xml document was
in MISMO form (Mortgage Industry Standard Message Organization). Then the
document is stored in a clob in a table. The document is stored Without
the tags. We are storing these XML messages into a CLOB datatype for
later processing. I want to read the CLOB and then parse out the
individual fields to store into a table. What is the best way to
accomplish this in PL/SQL? Here is one sample record:
<MORTGAGEDATA>
<APPLICATION LoanPurposeType="OTHER">
<LenderCaseIdentifier>3631681</LenderCaseIdentifier>
<LendersBranchIdentifier>2966448</LendersBranchIdentifier>
</APPLICATION>
<PROPERTY PropertyUsageType="Primary">
<Address1>1335 test</Address1>
<City>las cruces</City>
<State>NM</State>
<PostalCode>88001</PostalCode>
</PROPERTY>
<SUBJECTPROPERTY>
<SubjectPropertyEstimatedValueAmount>69000</SubjectPropertyEstimatedValueAmount>
</SUBJECTPROPERTY>
<BORROWERRECONCILEDLIABILITY LiabilityType="HelocSubjectProperty">
<LiabilityUnpaidBalanceAmount>0</LiabilityUnpaidBalanceAmount>
<LiabilityMonthlyPaymentAmount>0</LiabilityMonthlyPaymentAmount>
</BORROWERRECONCILEDLIABILITY>
<BORROWERRECONCILEDLIABILITY LiabilityType="MortgageLoanSubjectProperty">
<LiabilityUnpaidBalanceAmount>0</LiabilityUnpaidBalanceAmount>
</BORROWERRECONCILEDLIABILITY>
<BORROWER>
<FirstName>scooby</FirstName>
<MiddleName/>
<LastName>doo</LastName>
<NameSuffix/>
<MothersMaidenName>velma</MothersMaidenName>
</BORROWER>
</MORTGAGEDATA>
NOTE: I have tried to use DBMS_XMLQUERY and it comes out like this using a
stored procedure called printclob: When I do this the data is put into
one field called xml_app_msg. The problem is how do I reference the
individual fields like FirstName and so on to store in another table? Can
I apply a stylesheet and if so, how?
Or do I create an object type called xml_app_msg with the fields lastname
and so on?
-- The table is raw_xml_msg_tbl and the field with the stored infomation is
xml_app_msg.
set serveroutput on size 50000
declare
queryCtx DBMS_XMLquery.ctxType;
result CLOB;
begin
queryCtx := DBMS_XMLQuery.newContext('select xml_app_msg from raw_xml_msg_tbl where app_id = :APP_ID');
-- DBMS_XMLQuery.clearBindValue(queryCtx);
DBMS_XMLQuery.setBindValue(queryCtx,'APP_ID','LT1001');
-- get the result..!
result := DBMS_XMLQuery.getXML(queryCtx);
-- Now you can use the result to put it in tables/send as messages..
printClobOut(result);
DBMS_XMLQuery.closeContext(queryCtx); -- you must close the query handle..
end;
OUTPUT:
<?xml version = '1.0'?>
<ROWSET>
<ROW num="1">
<XML_APP_MSG><MORTGAGEDATA>
<BORROWER>
<FirstName>Falls</FirstName>
<MiddleName/>
<LastName>Water</LastName>
<NameSuffix/>
<SSN>123-45-6789</SSN>
</BORROWER>
</MORTGAGEDATA>
</XML_APP_MSG>
</ROW>
</ROWSET>
null

I parse the XML doc into a domdocument and then loop through using xpath.valueof to pull the individual values from the nodes and then build a generic insert. It works quite well with a small number of columns. I'm not sure how it would work with a lot of columns. You can get code examples from Steve Muench's book "Developing Oracle XML Applications".

XML Message Not Generated in SUS SRM 4.0

Hi !
In Supplier Self Service(SUS) SRM 4.0 we did a
development for ASN creation through file upload .
It's a <b>BSP</b> Application .
Vendor uploaded the file for ASN creation .
Their generated ASN No. which are in Standard tables.
But for Some of them No XML Messages Genrated which
suppose to pass backend SAP R/3 .
Anybody having any idea where exactly these XML
Messages are?   We have searched through SXMB_MONI
& checked all qRFCs.
But unable to find their XML messages.
Looking forward your ideas.
Regards
Sachin S M
<b></b>
Message was edited by: Sachin S M

Hi,
Can you tell me if the next scenario is possible with EBP 5.0 (WAS 6.40) but without XI.
We need to develop an application to allow the supplier to upload an Invoice in XML and save it in EBP.
I was thinking on using a BSP application with an input field to browse local PC and pick up an Invoice XML file. Then post the XML and parse it in the BSP application and save the invoice in EBP.
Do you have any experience on it or some documentation?
We have EBP 5.0 but don't want to install an SAP XI.
Thank you

XML message as input for webservice gives deserialization error

Hi,
jDeveloper 10.1.3
BPEL PM 10.1.2.0.2
Carrental example
Problem:
For the Business Rule Engine I did the Carrental XML example. Based on the java application that connects to the BR engine, I created a webservice in jDeveloper and deployed it to my localhost AS 10.1.3. The webservice has a testRule method that accepts a String buf as input. For now, the only thing the webservice does is return a 'do nothing' string. This works fine:
When deployed the testpage generates the following SOAP message:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body xmlns:ns1="http://carrental/types/">
<ns1:testRuleElement>
<ns1:buf>my xml message</ns1:buf>
</ns1:testRuleElement>
</soap:Body>
</soap:Envelope>
The SOAP response is:
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://carrental/types/"><env:Body><ns0:testRuleResponseElement><ns0:result>do nothing...</ns0:result></ns0:testRuleResponseElement></env:Body></env:Envelope>
In BPEL Designer I create a new asynchronous process ValidateBR, with a partnerlink for the webservice, based on the following WSDL file:
<definitions
name="Rent"
targetNamespace="http://carrental/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://carrental/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:tns0="http://carrental/types/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://carrental/types/"
elementFormDefault="qualified" xmlns:tns="http://carrental/types/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/">
<complexType name="testRule">
<sequence>
<element name="buf" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="testRuleResponse">
<sequence>
<element name="result" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="version">
<sequence/>
</complexType>
<complexType name="versionResponse">
<sequence>
<element name="result" type="string" nillable="true"/>
</sequence>
</complexType>
<element name="testRuleElement" type="tns:testRule"/>
<element name="testRuleResponseElement" type="tns:testRuleResponse"/>
<element name="versionElement" type="tns:version"/>
<element name="versionResponseElement" type="tns:versionResponse"/>
</schema>
</types>
<message name="Rent_testRule">
<part name="parameters" element="tns0:testRuleElement"/>
</message>
<message name="Rent_testRuleResponse">
<part name="parameters" element="tns0:testRuleResponseElement"/>
</message>
<message name="Rent_version">
<part name="parameters" element="tns0:versionElement"/>
</message>
<message name="Rent_versionResponse">
<part name="parameters" element="tns0:versionResponseElement"/>
</message>
<portType name="Rent">
<operation name="testRule">
<input message="tns:Rent_testRule"/>
<output message="tns:Rent_testRuleResponse"/>
</operation>
<operation name="version">
<input message="tns:Rent_version"/>
<output message="tns:Rent_versionResponse"/>
</operation>
</portType>
<binding name="RentSoapHttp" type="tns:Rent">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="testRule">
<soap:operation soapAction="http://carrental//testRule"/>
<input>
<soap:body use="literal" parts="parameters"/>
</input>
<output>
<soap:body use="literal" parts="parameters"/>
</output>
</operation>
<operation name="version">
<soap:operation soapAction="http://carrental//version"/>
<input>
<soap:body use="literal" parts="parameters"/>
</input>
<output>
<soap:body use="literal" parts="parameters"/>
</output>
</operation>
</binding>
<service name="Rent">
<port name="RentSoapHttpPort" binding="tns:RentSoapHttp">
<soap:address location="http://localhost:7780/Rules-rent-context-root/RentSoapHttpPort"/>
</port>
</service>
</definitions>
I defined the process variable inputVariable to be defined based on the carrental.xsd schema. I assign the inputVariable to the 'buf' parameter of the webservice as shown below in the ValidateBR.bpel

<process name="ValidateBR" targetNamespace="http://xmlns.oracle.com/ValidateBR" xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:ns1="http://rules.oracle.com/carrental" xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns3="http://carrental/types/" xmlns:ns2="http://carrental/" xmlns:client="http://xmlns.oracle.com/ValidateBR" xmlns:bpelx="http://schemas.oracle.com/bpel/extension" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">
<partnerLinks>
<partnerLink name="client" partnerLinkType="client:ValidateBR" myRole="ValidateBRProvider" partnerRole="ValidateBRRequester"/>
<partnerLink name="CheckBR" partnerRole="Rent_Role" partnerLinkType="ns2:Rent_PL"/>
</partnerLinks>
<variables>
<variable name="inputVariable" messageType="client:ValidateBRRequestMessage"/>
<variable name="outputVariable" messageType="client:ValidateBRResponseMessage"/>
<variable name="InvokeValidateBR_testRule_InputVariable" messageType="ns2:Rent_testRule"/>
<variable name="InvokeValidateBR_testRule_OutputVariable" messageType="ns2:Rent_testRuleResponse"/>
</variables>
<sequence name="main">
<receive name="receiveInput" partnerLink="client" portType="client:ValidateBR" operation="initiate" variable="inputVariable" createInstance="yes"/>
<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload" query="/ns1:repository"/>
<to variable="InvokeValidateBR_testRule_InputVariable" part="parameters" query="/ns3:testRuleElement/ns3:buf"/>
</copy>
</assign>
<invoke name="InvokeValidateBR" partnerLink="CheckBR" portType="ns2:Rent" operation="testRule" inputVariable="InvokeValidateBR_testRule_InputVariable" outputVariable="InvokeValidateBR_testRule_OutputVariable"/>
<invoke name="callbackClient" partnerLink="client" portType="client:ValidateBRCallback" operation="onResult" inputVariable="outputVariable"/>
</sequence>
</process>
When I deploy the process and initiate a testinstance from the BPEL console, the assign looks as follows:
<InvokeValidateBR_testRule_InputVariable>
<part name="parameters" >
<testRuleElement>
<buf>
<driver>
<driver-license-number>15-PS-FZ</driver-license-number>
<name>Rob de Haan</name>
<age>39</age>
<vehicle-type>Saab</vehicle-type>
<license-type>B</license-type>
<pre-convictions>0</pre-convictions>
<pre-accidents>0</pre-accidents>
<able-to-drive>true</able-to-drive>
</driver>
</buf>
</testRuleElement>
</part>
</InvokeValidateBR_testRule_InputVariable>
The InvokeValidateBR shows the following error:
<remoteFault>
<part name="code" >
<code>Client</code>
</part>
<part name="summary" >
<summary>when invoking endpointAddress 'http://localhost:7780/Rules-rent-context-root/RentSoapHttpPort', caught exception while handling request: deserialization error: unexpected XML reader state. expected: END but found: START: {http://rules.oracle.com/carrental}driver</summary>
</part>
<part name="detail" >
<detail>AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Client faultSubcode: faultString: caught exception while handling request: deserialization error: unexpected XML reader state. expected: END but found: START: {http://rules.oracle.com/carrental}driver faultActor: faultNode: faultDetail: {http://xml.apache.org/axis/}stackTrace:caught exception while handling request: deserialization error: unexpected XML reader state. expected: END but found: START: {http://rules.oracle.com/carrental}driver at org.collaxa.thirdparty.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221) at org.collaxa.thirdparty.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128) at org.collaxa.thirdparty.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1083) at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source) at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source) at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source) at javax.xml.parsers.SAXParser.parse(Unknown Source) at org.collaxa.thirdparty.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:226) at org.collaxa.thirdparty.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:645) at org.collaxa.thirdparty.apache.axis.Message.getSOAPEnvelope(Message.java:424) at org.collaxa.thirdparty.apache.axis.client.Call.invokeEngine(Call.java:2754) at org.collaxa.thirdparty.apache.axis.client.Call.invoke(Call.java:2715) at org.collaxa.thirdparty.apache.axis.client.Call.invoke(Call.java:1737) at com.collaxa.cube.ws.wsif.providers.axis.WSIFOperation_ApacheAxis.invokeAXISMessaging(WSIFOperation_ApacheAxis.java:2113) at com.collaxa.cube.ws.wsif.providers.axis.WSIFOperation_ApacheAxis.invokeRequestResponseOperation(WSIFOperation_ApacheAxis.java:1611) at com.collaxa.cube.ws.wsif.providers.axis.WSIFOperation_ApacheAxis.executeRequestResponseOperation(WSIFOperation_ApacheAxis.java:1083) at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:452) at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:327) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:189) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:601) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:317) at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:188) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3408) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1836) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:166) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:252) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5438) at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1217) at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:511) at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:335) at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.java:1796) at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125) at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70) at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86) at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123) at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755) at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534) {http://xml.apache.org/axis/}hostname:NL-GRH-L120981 </detail>
</part>
</remoteFault>
FYI: the webservice only contains a return "do nothing"
Question:
What is the proper way to assign an XML message to the web service?
Any help would be appreciated.
Rob
Message was edited by:
[email protected]

Hi,
Reading only is not possible..
I will be still more clear in my question this time..
I have deployed my bpel. My receiveInputVariable is of type xsd:string.
So when i run the bpel in my console, i will be asked to give input as string data.
So when i go to the XMLView, it will be like this.
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
     <soap:Body xmlns:ns1="http://xmlns.oracle.com/Sabari_POC_Appln/DOM_Parser/ConvertToBLOB">
          <ns1:process>
               <ns1:input></ns1:input>
</ns1:process>
</soap:Body>
</soap:Envelope>
Now, i am going to give my input like this. --- which leads to error.
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
     <soap:Body xmlns:ns1="http://xmlns.oracle.com/Sabari_POC_Appln/DOM_Parser/ConvertToBLOB">
          <ns1:process>
               <ns1:input>
*<?xml version="1.0" encoding="UTF-8"?>*
*<projects>*
*<project id = "BP001">*
*<name>Banking Project</name>*
*<start-date>Jan 10 1999</start-date>*
*<end-date>Jan 10 2003</end-date>*
*</project>*
*<project id = "TP001">*
*<name>Telecommunication Project</name>*
*<start-date>March 20 1999</start-date>*
*<end-date>July 30 2004</end-date>*
*</project>*
*<project id = "PP001">*
*<name>Portal Project</name>*
*<start-date>Dec 10 1998</start-date>*
*<end-date>March 10 2006</end-date>*
*</project>*
*</projects>*
</ns1:input>
</ns1:process>
</soap:Body>
</soap:Envelope>
This xml is not accepted as string input.. so kindly suggest me some other solution.
I also tried.. like.. making my receiveInputVariable of type xsd:anyType, it also dint help. same error occurred.
Thanks,
Sabarisri. N
Edited by: Sabarisri N on Jul 20, 2011 1:03 PM

Reading the XML message from Xi stored in XML format from a abap program.

Hi Gurus,
My requirement here is to read the data that will be coming from Xi from my custom abap program and updating 2 data base tables. The method is after the data mapping is done a class is generated in abap proxy in which a method is available. Inside the method i am writing the code for getting the Xi data stored as a payload message which can be seen in the transaction SXMB_MONI. My code is given below.
***begin code***
method ZII_PAYROLL_HEADER_IN~PAYROLL_HEADER_IN.
**** INSERT IMPLEMENTATION HERE **** ***
data: ln type i.
DATA: i_items TYPE TABLE OF ZPAYLOAD_WRAPPER_EMPLOYEE_REC3.
*DATA: wa_items type ZPAYLOAD_WRAPPER_EMPLOYEE_TAB5.
data: wa_items type ZPAYLOAD_WRAPPER_EMPLOYEE_REC3.
DATA:PERNR TYPE STRING.
*data: it_ZPAYLOAD_WRAPPER16 TYPE ZPAYLOAD_WRAPPER16.
I_ITEMS[] = INPUT-PAYLOAD_WRAPPER-BODY-XMLDOC-PAYROLL_PERIOD_OVERVIEW-EMPLOYEE_RECORD[].
*I_ITEMS = INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord.
describe table i_items[] lines ln.
endmethod.
**End code***
As per the logic the data stored in the XML message should be avaialble in INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord which i am assigning to a local internal table in the class.
But in my case there is no data coming in
INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord.
But i can see the data transffered from XI in the transaction SXMB_MONI->XML message->inbound message->payload.
Is there any way to read the data stored in the XML message in the transaction SXMB_MONI.
Also why the data is not coming in
INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord inside the class.
If there is any solution for this problem please post it.

You can use function module SXMB_GET_MESSAGE_PAYLOAD.
Code snippet:
DATA: ls_mast      TYPE sxmspmast,
      ls_msgkey    TYPE sxmsmkey,
      lv_bin_xml   TYPE xstring,
      lv_str_xml   TYPE string.
* select sxmspmast into ls_mast
ls_msgkey-msgid = ls_mast-msgguid.
ls_msgkey-pid    = 'RECEIVER'.
CALL FUNCTION 'SXMB_GET_MESSAGE_PAYLOAD'
    EXPORTING
      im_msgkey      = ls_msgkey
      im_archive     = ' '
      im_version     = ls_mast-vers
    IMPORTING
      ex_msg_bytes   = lv_bin_xml
    EXCEPTIONS
      not_authorized = 1
      no_message     = 2
      internal_error = 3
      no_payload     = 4
      OTHERS         = 5.
IF sy-subrc EQ 0.
      lv_str_xml = cl_soap_moni_helper=>convert_xstring_to_string( xstring_in = lv_bin_xml ).
ENDIF.

XI have to break/split XML-File into N times a XML Message

Hello,
Can anyone help with this one. I guess this is not an easy exercise but I need to solve it urgently.
XI gets a XML-file from a system.
This file has N times a element <XBT>.
Every time XI gets such a file the number of <XBT> is different.
XI haves to break this xml into N xml messages according to element ><XBT> in order to send them to Sap sequentially.
For example the following XML file have to split up into 2 xml files (the elements XBT occurs 2 times)
How can this be done?
<mt_BubaBestand>
<b><XBT></b>
<Algemeen>
     <Verkooporganisatie>5000</Verkooporganisatie>
     <Distributiekanaal>50</Distributiekanaal>
     <Productgroep>50</Productgroep>
     <Ordernummer>123123</Ordernummer>
     <Verkoopgroep/>
     <Documentdatum>20061207</Documentdatum>
     <Medewerker_nr>e60217</Medewerker_nr>
     <Medewerker_naam>Hermans</Medewerker_naam>
     <CRM_nr/>
     <CIFDedicated/>
     <Klantgroep/>
</Algemeen>
<b></XBT></b>
<b><XBT></b>
<Algemeen>
     <Verkooporganisatie>5000</Verkooporganisatie>
     <Distributiekanaal>50</Distributiekanaal>
     <Productgroep>50</Productgroep>
     <Ordernummer>123123</Ordernummer>
     <Verkoopgroep/>
     <Documentdatum>20061207</Documentdatum>
     <Medewerker_nr>e60217</Medewerker_nr>
     <Medewerker_naam>Hermans</Medewerker_naam>
     <CRM_nr/>
     <CIFDedicated/>
     <Klantgroep/>
</Algemeen>
<b></XBT></b>
</mt_BubaBestand>

This is pretty standard procedure if you are posting these messages to R/3. As was pointed out in the weblogs above, when using IDocs you don't need to do any tricky configuration. Just make sure that your XML structure is set correctly (ie: 1 to unbounded, etc) to the limits that you want, and XI will automatically loop the mapping process for each instance of the <XBT> item that it detects in the source message. You mentioned:
<i>For example the following XML file have to split up into 2 xml files (the elements XBT occurs 2 times)</i>
Well, you don't actually split it into two XML files per say, XI just processes the source message straight to multiple IDocs using the IDoc adapter.

EBP SUS NO PO RESPONSE and Invoice XML MESSAGE CREATED

Hi All,
We have configured EBP - SUS on SRM 7 server with extended classic scenario.PO's are transfering fine from EBP to SUS and are visible in SUS also expected follow on documents are PO response,Confirmation,Invoice.But wen we process the po and confirm all items no po response xml message is created and a local po response is created which is not transferred back to EBP.Later when we create a confirmation for the same po,it is transfered to EBP via serviceack xml message and is visible.
Finally wen v create a invoice it is also created locally and not tranferred to EBP,no xml message is created in this case too.
In XI we are using integration scenario which is based on SRM 5.5 contents.
Any kind of pointers will b appreciated.
Thanks.

Hi
Proxies are fine,also i check for events in define transaction type.Here are the values for both response and invoice evrything seems fine.
Description          SUS PO Purch.Ord.Rsp
Int. Number Range         01
Ext. Number Range         02
Status Profile
BTrans.Category      BUS2232
Description          SUS PO Confirmation
Partner Determ.Proc.
Text Schema          PCOS
Event Schema
Description          SUS Invoice
Int. Number Range         01
Ext. Number Range         02
Status Profile
BTrans.Category      BUS2234
Description          SUS Invoice
Partner Determ.Proc.
Text Schema          SUIV
Event Schema
EVENT DEFINITION
BUS2234     SUS Invoice     SUS Invoice
ERROR_OCURRED     An Error has Occurred
Any settings tat we need to do to trigger this invoice to create a xml message.Also we regenerated the authorization profiles but had effect on xml creation.
Thanks

Possibility to transfer additional parameters in outbound XML message

Hi,
is there any possibility to transfer additional parameters in outbound XML message using (BADI: BBP_SAPXML1_OUT_BADI).
Additional parameters are,
1. Communication Method for the Business Partner
2. R/3 Vendor # & logical system for Business Partner
3. Relationship between Business Partner Number and R/3 Vendor Number is BP GUID.
How can we extended the structure in the BADI.
Please give me qucik response.
Thanks & Regards.
Surya

Look for structure which the interface parameters are referring, there you should see some dummy structures referring to INCL_EEW* for e.g. in PO header INCL_EEW_PD_HEADER_SSF_PO. Add additional fields and pass the data accordingly.
Regards, IA

Handling xml message of size more than 100mb in SAP PI 7.1

Dear Experts,
Is it possible for PI to pick-up and process a XML message of size more than 100 MB in PI 7.1 EHP-1?
If yes, can you please let me know how to handle it?
Thank you.

Hi Saravana,
it is not a best practice to more than 100mb..
you can increase below parameters and so that you would be able to process for the best..
u2022     UME Parameters : May be we need to look into the pool size and poolmax wait parameters - UME recommended parameters (like: poolmaxsize=50, poolmaxwait=60000)
u2022     Tuning Parameters: May be we need to look/define the Message Size Limit u201Clike: EO_MSG_SIZE_LIMIT = 0000100u201D under tuning category
u2022     ICM Parameters: May be we need to consider ICM parameters (ex: icm/conn_timeout = 900000. icm/HTTP/max_request_size_KB = 2097152)
Thanks and Regards,
Naveen

How to find an XML message ID with a wildcard QueueID

Hi,
My scenario is: transfer purchase orders from SAP SRM to marketplace(3rd party system)
The QoS is EOIO, therefore my POs are transferred with Queues but each queue has a leading prefix which are all registered.
The project is already go-live for over 6 months.
I have tried with SXMB_MONI of course, the display of Messages is far too limited(only 2000 messages is allowed to be displayed one time, or, is any way to adjust this?)
And also a table called SXMSPMAST, I searched with a queue id "*3000012345" in the field "QUEUEINT", no result. (3000012345 is the PO number)
Is there any other table to find a certian message by queue id?
Thanks.
Regards,
Klein

hi,
>>>>Is there any other table to find a certian message by queue id?
do you realy want to search for message id by queue it?
wouldn't it be easier to search with PO number
(which is probably inside the XML message?)
if so then you can use TREX to search inside the XML messages
payload (from XI SP15)
isn't this an easier way?
Regards,
michal

Reprocess XML messages

Similar Messages

Maybe you are looking for