Reproducible fatal error when heading 2/3 are mapped

Hello, I am totally unable to map my Headings 2 & 3, for
some unknown reason. Whenever I map one, both, or either of these
two styles (about which I can see nothing unusual), I get a fatal
error from the Microsoft help engine when I try to compile. This
error is extremely time consuming to resolve, considering how I
have to go through majorly memory-intensive operations (Edit Style
settings and Force Update), not to mention the periodic and
miscellaneous crashes of the program, and sometimes I have to
reboot to recover from the fatal error and/or crashes. Nonetheless,
I have isolated this problem down to mapping these two styles and
it is fully reproducible. Does anyone know what would cause my
headings 2 and 3 to cause this problem? Heading 1 maps fine.
Thank you for any insight you may be able to offer on my
situation.
Z.

I have had a similar problem that I have pinned down to
something bad happening while the final TOC is being compiled,
after all the conversions of the FM files have been done.
I blew nearly a day troubleshooting, and I can find nothing
wrong or unusual with my FM files, including the TOC. In fact,
earlier, I successfully performed force updates several times.
Fix:
I finally gave up troubleshooting, and started a new RoboHelp
project from scratch, using the same setup, and the same edited
fmstyles.css. The new project worked fine, and I was able to
produce a .chm file, no problem.
Here are my notes:
Symptom: final .chm file won't open
Background: made edits to FM files of project that updated
successfully many times,
Forced update again, that seems to work fine, generated
layout, that seemed to work fine,
But when I clicked View files, nothing happened, the dialog
box silently closed.
When I clicked on the .chm file directly, MS messages says:
Cannot open the file: path/file name
and nothing more. the .chm file looks to be of the correct
file size.
Trys:
Updated FM files, re-imported formats for TOC, re applied
conditions, turned off computer, turned it on
Fix: Threw out RoboHelp project and started a new one
New project works fine.

Similar Messages

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Fatal error when trying to add derived table

Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PM

Hi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik

Fatal error when importing Photoshop PSD files in Captivate 5.5 MAC

Hello,
I'm running Captivate 5.5 Trial on MAC OS X Snow Leopard. All of a sudden one of my PSD files started causing a fatal error when I try to import it into Captivate.
I tried resaving both captivate and PSD file, saving them under different names, restarting, etc.
What I get is "Fatal error occured, ... Restart Adobe Captivate..."
I've tried removing Preferences folder as well as clearing the cache.
Any help would be greatly appreciated...
Thanks

You can only open Cp 5.5 files with Cp 5.5.
There is no solution for opening these files in Cp 5 version.
May I ask, why did you not get a license of Cp 5.5? It's been around for over 6 months now.

Fatal error when I open Itunes and Quick time.

EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.4.5.67 P3 : 47edaedf
P4 : QuickTimePlayer.exe P5 : 7.4.5.67 P6 : 47edaedf P7 : 0000130d
P8 : c0000409 P9 : 00000000
cant uninstall quick time gives fatal error, stems from same error when I try to open Itunes.

Checking on a possible cause of similar symptoms. Have you ever install an ACE or K-Lite Mega Codec pack, a copy of QT Alternative or QT Lite, or a copy of Storm Codec on that PC?
(Checking on this because those programs, and some others, can install "QuickTime" componentry on the PC that can break a copy of the QuickTime on the PC, and as a consequence break iTunes. The "fatal error" when attempting to uninstall QuickTime is often a symptom of that, too.)

Fatal error when installing icloud on windows 7 PC

Get fatal error when trying to install icloud on Windows7 PC.

Does this happen in a new user profile.. and what version of windows 64 or 32 bit ?

Fatal error when trying to install AIR app on OSX

A user of my application is getting a fatal error when trying to install on OSX. Most installs seem to go fine so I was surprised at this one.
A portion of the OSX error report is below. Has anybody experienced anything similar? If so, were you able to identify the core problem?
Thanks in advance for any thoughts!
Daniel
Date/Time:       2013-06-13 15:50:24.666 -0700
OS Version:      Mac OS X 10.8.3 (12D78)
Report Version: 10
Interval Since Last Report:          1414734 sec
Crashes Since Last Report:           30
Per-App Crashes Since Last Report:   5
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
VM Regions Near 0x8:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
    __TEXT                 0000000000001000-0000000000007000 [   24K] r-x/rwx SM=COW /Applications/SimpleDiagrams2.app/Contents/MacOS/SimpleDiagrams2
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.adobe.AIR                      0x02b43f72 0x2800000 + 3424114
1   com.adobe.AIR                      0x02909628 0x2800000 + 1087016
2   com.adobe.AIR                      0x02909853 0x2800000 + 1087571
3   com.apple.AppKit                   0x95544970 -[NSApplication(NSAppleEventHandling) _handleAEReopen:] + 255
4   com.apple.AppKit                   0x952ec824 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 378
5   libobjc.A.dylib                    0x9a3c9628 -[NSObject performSelector:withObject:withObject:] + 77
6   com.apple.Foundation               0x94e4473a __76-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_0 + 121
7   com.apple.Foundation               0x94e44291 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 430
8   com.apple.Foundation               0x94e4408e _NSAppleEventManagerGenericHandler + 173
9   com.apple.AE                       0x97aeda35 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 331
10 com.apple.AE                       0x97ac2fbe dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
11 com.apple.AE                       0x97ac2e7d aeProcessAppleEvent + 318
12 com.apple.HIToolbox                0x9222fc58 AEProcessAppleEvent + 100
13 com.apple.AppKit                   0x952e8d4d _DPSNextEvent + 1655
14 com.apple.AppKit                   0x952e81dc -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
15 com.apple.AppKit                   0x952de63c -[NSApplication run] + 855
16 com.adobe.AIR                      0x0280a772 0x2800000 + 42866
17 com.adobe.AIR                      0x0280aab8 0x2800000 + 43704
18 libobjc.A.dylib                    0x9a3c95d3 -[NSObject performSelector:withObject:] + 70
19 com.simplediagrams2                0x00002f97 start + 2567
20 com.simplediagrams2                0x000025c5 start + 53
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib             0x9263d9ae kevent + 10
1   libdispatch.dylib                  0x97b75c71 _dispatch_mgr_invoke + 993
2   libdispatch.dylib                  0x97b757a9 _dispatch_mgr_thread + 53
Thread 2:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 3:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 4:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 5:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x99781095 pthread_cond_wait$UNIX2003 + 71
3   com.adobe.AIR                      0x02d1b113 0x2800000 + 5353747
4   com.adobe.AIR                      0x02b4d5dc 0x2800000 + 3462620
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 6:
0   libsystem_kernel.dylib             0x9263c8e2 __psynch_cvwait + 10
1   libsystem_c.dylib                  0x996fb280 _pthread_cond_wait + 833
2   libsystem_c.dylib                  0x997810e0 pthread_cond_timedwait$UNIX2003 + 70
3   com.adobe.AIR                      0x02d1b13f 0x2800000 + 5353791
4   com.adobe.AIR                      0x02d60c0e 0x2800000 + 5639182
5   com.adobe.AIR                      0x02d1b22d 0x2800000 + 5354029
6   com.adobe.AIR                      0x02d1b2a7 0x2800000 + 5354151
7   com.adobe.AIR                      0x02d1b342 0x2800000 + 5354306
8   libsystem_c.dylib                  0x996f65b7 _pthread_start + 344
9   libsystem_c.dylib                  0x996e0d4e thread_start + 34
Thread 7:
0   libsystem_kernel.dylib             0x9263d0ee __workq_kernreturn + 10
1   libsystem_c.dylib                  0x996f90ac _pthread_workq_return + 45
2   libsystem_c.dylib                  0x996f8e79 _pthread_wqthread + 448
3   libsystem_c.dylib                  0x996e0d2a start_wqthread + 30
Thread 8:
0   libsystem_kernel.dylib             0x9263d0ee __workq_kernreturn + 10
1   libsystem_c.dylib                  0x996f90ac _pthread_workq_return + 45
2   libsystem_c.dylib                  0x996f8e79 _pthread_wqthread + 448
3   libsystem_c.dylib                  0x996e0d2a start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x02b43f55 ecx: 0x95b40466 edx: 0x00000000
edi: 0x00000000 esi: 0xbfffef18 ebp: 0xbfffee58 esp: 0xbfffeda0
   ss: 0x00000023 efl: 0x00210282 eip: 0x02b43f72   cs: 0x0000001b
   ds: 0x00000023   es: 0x00000023   fs: 0x00000000   gs: 0x0000000f
cr2: 0x00000008
Logical CPU: 1

Hi Daniel,
Could you post or send me ([email protected]) the entire crash log? I'll at least need the binaries section so I can properly symbolicate the log.
Thanks,
Chris

Fatal Error when installing LabView 8.5

I encounter a fatal error when I attempt to install LabView 8.5. The error that occurs has the following in its details:
".\UberInstaller.cpp(1871): IInstallerError 10014
Fatal Error. A failure has occurred in NISystemInfo.
CoLoadLibrary failed on C:\lv8.5\bin\NISysInf.dll"
I am installing from a system that previously had LabView 8.2 installed, however everything was uninstalled before I began installing the new version.
No hardware is connected in my computer.
I copied the files from the DVD to my harddrive and am still failing to install it from there.
The disc should be fine as my supervisor had used the same disc to install on his computer. ( our licence allows this )
Any help would be appreciated.
Attatched is a screenshot of the error.
Attachments:
error5.JPG ‏165 KB

IInstallerError 10014
I searched for and found the same error in this forum that I am experiencing. I am trying to install the NI Switch Executive and the install fails every time. This is a fresh install and I am not running any antivirus s/w. It is a DVD copy of the Switch Executive s/w. Has there been any conclusive explanation as to what is happening with this? I have included a .jpg of the error. Thanks in advance for any help.
Attachments:
Error_Message.jpg ‏96 KB

HT1926 Trying to repair a botched ITunes update, following dicrections, keep getting "fatal error" when removing Apple Mobile Device Support. Can't get past this step to reinstall. Any advice? Thanks!

Trying to repair a botched ITunes update, following dicrections, keep getting "fatal error" when removing Apple Mobile Device Support. Can't get past this step to reinstall. Any advice? Thanks!

Hey there!
I've spent the best part of the day unpicking this huge mess from the upgrade I completed last night - what a nightmare. I followed a tonne of advice - [actaully, this link was really helpful to me]: http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm however, I still could not fix the **** thing - and that was following basically a day of uninstalling, installing etc.
In the end - I completed a system restore taking my computer back about five days, and just ignoring the new upgrade with itunes until they can get this fixed.
I hope that this might work for you and anyone else reading this. It nearly drove me to drink [!]. I seemed to get past one error message and have it replaced by another - so the system restore was basically the last resort.
Good luck - !

Acrobat 8.1.2 Standard fatal error when viewing header

When I try to view Document - Header & Footer the program will draw the editing window and then has a fatal error which says "Acrobat 8.1 has encountered a problem and needs to close". There is the opportunity to send this info to Microsoft. This also happens when using the Document - Background or Watermark menus. All other parts of the program seem OK.
I've tried the Repair feature, no difference.
Any clues?
Oddly, it works fine on a Win Vista machine, but not on a Win XP SP3 machine.
Thanks GSpence

Cure seems to be to replace the newest version of ADMplugin.apl with the version contained in the original package as referenced in the thread 'Acrobat 8.1 Always Crashes with "admplugin.apl" reference??'.
This works! GS
Sexy Erudit - 3:54pm Mar 15, 08 PST (#3 of 6)
Hi Guys,
I had the same problems as the ones you stated above. Tried EVERYTHING ! lol Install / Uninstall with removal of all Adobe physically related files, cleaned the registry... To no avail.... Untill....
I found the solution !!!!
The problem is definitely related to the "admplugin.apl" file. For some reason it seems to be corrupted in the 8.1.x updates. Simply find the file in the original 8.0 Professional package (should be in the "Data1.cab" file) and simply copy over the newer file (in C:\Program Files\Adobe\Acrobat 8.0\Acrobat\SPPlugins ).
Everything should be working well after that (I couldn't have access to "Preferences", "Optimize", "Reduce File Size" even "Search"). I now have a fully fonctional version.
Hope this post will help out !
Cheers !
SE

Fatal Error when starting Power Saver on Tecra M9

When I try to start Power Saver on a Tecra M9 (21), I get a Fatal error; code: 0X51A.
I've tried various combinations of uninstalling, cleaning registry, rebooting, etc., but everytime I reinstall (version 7), I get the same fatal error.

Hi
You are speaking about the Power saver for XP? Am I right?
Please note that you have to install all drivers, tools and utilities in the right order!!!
The installation instruction should be checked and you should follow the guide lines.
Very important;
The common modules is a necessary tool to get all other Toshiba tools running properly. Furthermore there is a power saver driver and utility. The driver must be installed before the utility!!!
Please dont forget this!!!

Why fatal error when try to copy .ai files to CD in Windows XP?

I have a large work folder which includes .ai files (Adobe Illustrator v. 10). I can get the CD Write Wizard in Windows XP to write the folder to the CD, but when I try to either scan it with Windows Explorer or actually open an .ai file on it with AI, I get a fatal error "instruction at xx referenced memory at yy which could not be written". Seems like there's an embedded file somewhere, although I've checked every .ai file to be sure everything is "flattened". There are also some Acrobat pdf's and Paintshop Pro image files. Any suggestions for what is causing the problem?

You don't need to recover the system.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press the space bar:
dot_clean -m
Switch to the Finder and drag the icon of the flash drive into the Terminal window. Some text will appear after what you entered. Press return.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

Fatal Error When Running Sysprep on Server 2008 R2

its the registry keys that needs to change. once an image has been sysprepped once, if you try and reuse this image - alter the software for example - then sysprep again, 99 times out of 100 it will give you this grief
I cant remember which registry key is the trick, uncle google
BTW, why as its virtualised are you not just backing up the VM?

Bear with me because I'm a complete n00b when it comes to running sysprep.I've just set up a VM the way I'd like it. I intend for it to be an application serverfor a Citrix environment, and I'd like to make at least one copy for redundancy's sake and performance considerations for the users. It took me a long time to get the app server set up correctly and I'd prefer to NOT duplicate the process if at all possible.Problem I'm having is that after cloning the server, I need to run sysprep on it in order to generate a new SID. But every time I run sysprep I get a fairly useless 'fatal error' message:"system preparation tool 3.14 a fatal error occurred while trying to sysprep the machine"I've tried quite a few fixes that I've found online, but none of them seem to work. What I've tried so far:1) Running MS's hotfix found in this article2)...
This topic first appeared in the Spiceworks Community

Portal 4.0 fatal error when config for MSSQL

I've been trying to configure the portal 4.0 to use MSSQL 2000. I followed
the instructions in the MSSQL addon file. However, after I tried to change
the security realm setting and restart the server, I always get a fatal
error like the following:
Throwable: Exception[com.bea.p13n.security.realm.RDBMSException: An error
occured getting the realm delegate.]
Exception[com.bea.p13n.security.realm.RDBMSException: An error occured
getting the realm delegate.]
at com.bea.p13n.security.realm.RDBMSRealm.getUser(RDBMSRealm.java:239)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:806)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:670)
at
weblogic.security.acl.internal.FileRealm.getPrincipalFromAnyRealm(FileRealm.
java:1008)
at
weblogic.security.acl.internal.FileRealm.ensureRequiredObjectsExist(FileReal
m.java:957)
at
weblogic.security.acl.internal.FileRealm.loadMembers(FileRealm.java:1202)
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:274)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35
I know that my setting for the commerce pool and datasync pool are correct.
I could see the connection in the SQLServer console. Is it necessary to
change the setting of security realm? Can I just turn off the setting to
avoid this error( and how??)? Also when I unchecked 'user CLOB for read'
and 'use CLOB for write' setting in the application domain, I can see the
'deserializing' error from the console. Did you guys entercounter the same
problem when configurate Weblogic Portal for SQLServer? Pls advise.
Thanks.
Cal

Hi.
Please try posting this question in
weblogic.developer.interest.personalization. Folks reading that newsgroup are
more familiar with portal config issues.
Regards,
Michael
cal wrote:
I've been trying to configure the portal 4.0 to use MSSQL 2000. I followed
the instructions in the MSSQL addon file. However, after I tried to change
the security realm setting and restart the server, I always get a fatal
error like the following:
Throwable: Exception[com.bea.p13n.security.realm.RDBMSException: An error
occured getting the realm delegate.]
Exception[com.bea.p13n.security.realm.RDBMSException: An error occured
getting the realm delegate.]
at com.bea.p13n.security.realm.RDBMSRealm.getUser(RDBMSRealm.java:239)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:806)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:670)
at
weblogic.security.acl.internal.FileRealm.getPrincipalFromAnyRealm(FileRealm.
java:1008)
at
weblogic.security.acl.internal.FileRealm.ensureRequiredObjectsExist(FileReal
m.java:957)
at
weblogic.security.acl.internal.FileRealm.loadMembers(FileRealm.java:1202)
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:274)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35
I know that my setting for the commerce pool and datasync pool are correct.
I could see the connection in the SQLServer console. Is it necessary to
change the setting of security realm? Can I just turn off the setting to
avoid this error( and how??)? Also when I unchecked 'user CLOB for read'
and 'use CLOB for write' setting in the application domain, I can see the
'deserializing' error from the console. Did you guys entercounter the same
problem when configurate Weblogic Portal for SQLServer? Pls advise.
Thanks.
Cal--
Michael Young
Developer Relations Engineer
BEA Support

Fatal error when trying to execute a dml-command with OLAP API

Hi,
when I created an OracleConnection using the jdbc thin driver. The connection works fine.
But when I try to execute any dml-command with an SPLExecutor the following fatal error occurs:
oracle.express.idl.util.OlapiException: ORA-37118: Message 37118 not found; product=RDBMS; facility=ORA
ORA-06512: at "SYS.GENCONNECTIONINTERFACE", line 66
ORA-06512: at line 1
Any Suggestions ?

Hi Priya,
1.The entries for the initialization in the BW system are contained in the RSSDLINIT table for the DataSource/source system combination. Compare these with the entries in the ROOSPRMSC table in the OLTP system.
2. If there are NO entries in the RSSDLINIT table in BW, use transaction RSA7 to delete the delta queue for this DataSource/BW application combination in the source system (OLTP).
3.Once you deleted all the entries,In Infopackage scheduler option,delete all the init selections to proceed further.
In which system u r going to do this.....Quality or production.(Better,you check with basis to delete the entries.)
Regards
Kumar

Reproducible fatal error when heading 2/3 are mapped

Similar Messages

Maybe you are looking for