Reprot for Volume Data

Hello Experts... I am looking for the report where I can dump POs and get the no of cube / Volume of article for each line item.
Or in other words in which report I can volume for article no / Line item dump. The table and field name is MEPO1312-VOLEH2
Don't want to use any table. Pl suggest reprot name as user has to run this report everday for reporting purpose.
Your help will be highly appriciated.
Thanks
DK

Hi Norm,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
(Repair both Drives)
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Similar Messages

Error message from Time Machine: "Unable to complete backup. An error occurred while linking files on the backup volume." Using Time Machine Buddy, I got the following log entries: "Event store UUIDs don't match for volume: data" ror occured while l

More from the Time Machine Buddy: "Node requires deep traversal:/Volumes/Data" and "reason: kFSEDBEventFlagMustScanSibDirs"
I am using a Mac G5 with Leopard. My LaCie data drive failed and I replaced it with a WD MyPassport drive, at which time the failed backups began. The recent file updates do appear in Time Machine, but it appears to back up everything since the last completed backup.

Hi Norm,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
(Repair both Drives)
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

HT3275 Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image "/Volumes/Data/Anthony's iMac.sparsebundle" could not be accessed (error -1). Why? They computer system is up to da

Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
Anthony

Try this Discussion...
https://discussions.apple.com/message/18783684#18783684

HT3275 This file 'Volumes/Data/iMac van Bruno Heutz.sparsebundle' which is used for backup copie is already in use. What do I have to do?.

Every 30 min I get this message from Time Machine.
This file 'Volumes/Data/iMac van Bruno Heutz.sparsebundle' which is used for backup copie is already in use.
What do I have to do?.
Kind regards,
Bruno

Restart the TC..
But yours might be more serious than that.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
I would suggest you change all names to match what Pondini writes here.
C9
And use ethernet not wireless.

TDMS for reduce data volume

Hi Experts,
We have implemented TDMS and installed in all systems.
Our system landscape is like - DEV, QUAL and PRDN (ECC system)
we would like to use TDMS for reduce data volume in non production systems.
We have one more project system which is in the transport line.
Could any one please inform which is the best scenario to use TDMS for reducing data volume in non-production systems without much distrubance in production system.
Also how it is taking care of development system, since the customization will be overwritten in DEV system.
Thank you in advance.
Shylesh

Hi Shylesh,
you can use several packages to reduce your data. If you need application data you can use a time slice (package TDTIM), if you don't need it you can use the master data and customizing option (TDMDC).
I suppose you are going to transfer from one client to another so best thing to do is to create a new client on dev if you still need the old customizing settings.
Concerning the impact of the productive environment. Can you give me an idea on the database size ?
Regards,
Eddy

BR0243W Wrong creation date 2000-01-01 00.00.00 for volume PRDTPBKP

BR0280I BRRESTORE time stamp: 2010-04-07 12.32.32
BR0226I Rewinding tape volume in device /dev/rmt1 ...
BR0351I Restoring /oracle/QAS/sapbackup/.tape.hdr0
BR0355I from /dev/rmt1.1 ...
BR0241I Checking label on volume in device /dev/rmt1.1
BR0243W Wrong creation date 2000-01-01 00.00.00 for volume SCRATCH in device /dev/rmt1.1
BR0218W Checking label on volume in device /dev/rmt1.1 failed
BR0212I Please check the volume or the device
BR0280I BRRESTORE time stamp: 2010-04-07 12.36.20
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:

there are 2 kinds of label,
1. the one you stick on the tape cartridge.
2. the software label.
Brrestore checks the second one, the software label... obviously, it cannot read the "sticky label"...
brrestore tells you that you software label is SCRATCH and not PRDTPBKP.
you want proof of that?
run this command:
brbackup -i show
you will see SCRATCH.

HT1338 MacBook Pro OSX I keep getting a message, "The back disk image, "/Volumes/Data/Don's MacBook Pro. sparse baundle is already in use so, apparently my Time Machine can't back up my compute for about 2-3 weeks now. What do I do?

Time Machine cannot backup my MacBook Pro because: THe back disk image "/volumes/data/don'sMaBook oro.sparsebundle is aready in use/
What do I do to fix this?

Please look over to the right of this page and locate the heading of More Like This.
There are multiple answers and solutions there.

I keep getting a message that says i have not backed up for 2 weeksThe backup disk image "/Volumes/Data/JP's iMac.sparsebundle" is already in use. Latest successful backup: 10 January 2014

The backup disk image “/Volumes/Data/JP’s iMac.sparsebundle” is already in use.
Latest successful backup: 10 January 2014
what should i do ?

Hello JEANPIERRESONTA
Check out the troubleshooting article below to resolve issues with backing up with Time Machine.
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/ht3275
Regards,
-Norm G.

MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image "/Volumes/Data/Jerry Booher's MacBook Pro.sparsebundle" is already in use." error when Mac Pro tries to back up

MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up

It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone.

I have not been able to back up for2 days. Time machine error message: /Volumes/Data/David's MacBook Air.sparsebundle" is already in use.

I have not been able to back up for2 days. Time machine error message: /Volumes/Data/David’s MacBook Air.sparsebundle” is already in use.
What now?
Macbook Air.
Was working fine for the past year until now.

See more like this on the right.. this is the most common error reported here since mountain lion came out..
Or read C12.. http://pondini.org/TM/Troubleshooting.html
Or just restart the whole network.. in right order from off.. modem.. router / TC.. clients 2min gap.

When back up to time capsule I get the message no access to backupcopyfiledisc/Volume/data/imac.sparsebundle ( error - 1 )

When back up to time capsule I get the message no access to backupcopyfiledisc/Volume/Data/Terjesumac.sparsebundle ( error-1)

Try #C17 in Time Machine - Troubleshooting for known fixes. Works for me as well.
http://pondini.org/TM/Troubleshooting.html

HT3275 I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.

Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

The backup disk image "/Volumes/Data/Neil-MacBook Pro (171).sparsebundle" is already in use. error message. How do I fix? Ideas

"The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
OS X 10.8.1 (12B19)
" error message just started
Mountain Lion
OS X 10.8.1 (12B19)
MacBookPro 2.53 Corei5
All software update installed
Time Capsule : 1TB, 599 of 998GB used
What causes it?
How do you fix it?
How do you stop it happening again?
Any ideas please

Thanks for fast response.
I already tried C12, no luck. I did read C17, but that did not help either.
I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
But where to do you sent this request to? Doesn't seem easy to find a person to send it to.
I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever. Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool. I don't want to be a mechanic, I want to be a driver.
Thanks again for your help

Open hub for Inventory data

Experts,
We have a requirement where we need to push out Inventory data from BW to third party systems.
We have a daily cube and monthly snapshot cube implemented.
Now, there are fields that the third party systems require including Movement type. There are 500K movements everyday so putting this field in the cube would make the cube huge. Can we have another DSO loaded only by 2LIS_03_BF that supplies data to the third party systems via Open Hub in addition to the model we currently have?
Would this be a good design or rather would it work(in theory)??

Hi,
Yes you are thinking in correct direction. Adding movement type to cube will unneccessarily increase the data volume.
Cubes are not meant for detailed data.
I would suggest to go ahead with the DSO approach. The open hub will work with DSO.
Regards,
Geetanjali

Reprot for Volume Data

Similar Messages

Maybe you are looking for