Reputation Still Poor for Domain but not IP 2 Months After Fix?

The Aquaforest website (aquaforest.com) suffered an attack back in January which resulted in /en/index.asp being infected with an iFrame JavaScript Trojan.
This was corrected a few days after infection but IronPort/SenderBase still show a poor reputation whilst other measures (McAfee, AVG, Norton etc) all now report a clean site. The upshot is that unfortunately several of our customers using the Cisco IronPort Web Reputation Service cannot directly access our site for support etc so we are all are keen to resolve this issue as soon as possible.
We are not sure how to move forward at this point as we can't see any obvious cause of the Poor status - but interestingly, a Reputation lookup on our IP (217.118.136.236) gives a Neutral result as opposed to the Poor result for the domain (aquaforest.com).
We would be grateful for any ideas about what is going on here.
Thanks
Neil Pitman
Aquaforest

After further review, it has been determined that http://www.aquaforest.com/ is affected by malware. We have taken the necessary steps to lower the WBRS score and should be reflected in the next 4-6 hours.
Sylvester Fontenelle
Customer Support Engineer
Cisco Web Content Security Appliance
Cisco Technical Assistance Center RTP
United States: 1-800-553-2447
International: http://www.cisco.com/en/US/products/ps11169/serv_group_home.html

Similar Messages

My sound works for music but not apps

My sound works for music but not apps

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

Flash shockwave 11.5 works for youtube but not amazon instant video

Shockwave 11.5 r502 works for Youtube but not for Amazon Instant Video.

Hi,
It asked me if I wanted to install something to make the videos load faster -
Check Safari / Preferences - Extensions. Might be lurking there. If so, select the plugin then click Uninstall.
Check:
~/Library/Internet Plug-Ins (~) Tilde character represents your Home folder
Check:
/Library/Internet Plug-Ins
/Library/Application Support
/Library/Input Managers
And check your Safari downloads folder. If the file is still there, double click to open. Might be an uninstaller you can use.
Help here for troubleshooting Flash
Carolyn
Message was edited by: Carolyn

TS3274 Getting sound for music, but not for game apps. Checked settings and sound is on. Any suggestions.

My volume controls work and getting sound for music but not for game apps. I did check settings and sound is turned on under notifications and in the app. Any help would be appreciated

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

How can i check for posted but not yet commited changes in a form

Dears
I make changes programmatically in a form then i post it using (Post built in).
If the user exits the form, i make check for any changes in the form to commit it using the system variable :system.form_status
Unfortunately the value of this system variable is 'Query' not 'Changed' because of using the post built in.
Is ther another system variable ( or any another way ) that check for posted but not yet commited changes in the form ?
Thanks a lot
Mostafa Abolaynain

I had faced similar situation. Using of package variable which identifies, what is the user's latest action.
This is just a workaround.
Capture what the user has performed into a variable say, PKG_VAR.ACTION,
This will be assigned values like List L, and Create C, Update U and Saved S.
If commit is executed,assing the status S to the variable.
So while closing,
IF :system.form_status = 'CHANGED' or PKG_VAR.ACTION in ('C','U') THEN
-- validate the data, n perform commit.
else
-- just close the form.
end if;
Regards
Deepz : )

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

HT3180 My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

Was the restore done via iTunes?
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
If so then you may need to take it to Apple.

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

Table of Contents page numbers works for PDF but not for other formats

Hi,
I followed exactly was indicated here regarding creation of TOC.
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
(HTML and XLS are understandably not paginated in nature but why not in RTF?)
Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
What am I doing wrong?
Regards,
Jarell
Edited by: Jarell on Jan 11, 2012 8:08 PM

Hi Kavipriya,
What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
You may use any xml because the template does not use any dynamic binding of values.
The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
So the end result should be (PDF result from BI Publisher):
First TOC Item .................. 1
Second TOC Item ............. 2
But for RTF it outputs:
First TOC Item .................. 0
Second TOC Item ............. 0
And after doing Print Preview (once or twice)
First TOC Item .................. Error in Bookmark
Second TOC Item ............. Error in Bookmark
Hope this is detailed enough to illustrate the problem.
Edited by: Jarell on Jan 17, 2012 10:24 PM

Can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

Hello,
I apologize for submitting this question. Soon after I posted it I saw a similar question that had my answer..
Again, my bad for not looking first.
Ron Morris

Just got given an ipod touch 64G for free , but not to sure what mod it is. tried to download FB and could'nt because it said i need to update to iOS 6.0, does any1 know any way to upgrade or update?? please.

just got given an ipod touch 64G for free , but not to sure what mod it is. tried to download FB and could'nt because it said i need to update to iOS 6.0, does any1 know any way to upgrade or update?? please.

Identifying iPod models.

Block G/L Account for posting but not for parking

Hi all,
is there a possibility to customize a G/L account in a way that it is blocked for posting but not blocked for parking?
Kind regards,
Georg

Hi Georg-Stefan,
Directly, you cannot define such a thing. G/L blocking works on every posting level.
You can try, though, to pull a trick with a validation (OB28) checking on the BKPF-BSTAT field if it's not V - then block the posting. The prerequisites will be the G/L accounts, which can be organized in sets for better maintenance.
Regards,
Eli

HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Reputation Still Poor for Domain but not IP 2 Months After Fix?

Similar Messages

Maybe you are looking for