Req Assignment Tab page not coming for Service order

Hi All,
         I am working on simple service order SM01 type scenario. where in i am entering the operation & time for the same.
Now when i am going in to operation detail screen . I am not able to find out the requirement assignment tab page.
Strangely when i am using same reference object & creating the Maintenance order PM01 & doing the same as above it is showing the req assignment tab page.
Regards,
Amar

Hi , I have found out the solution for the same.
I have found that the external scheduling flag is   
set for order type SM01 in customizing. Since this is set, requirement    
assignment tab will not be populated as this will be taken care           
externally.                                                               
Remove the flag in below customising path.
Plant Maintenance and Customer Service--Maintenance and Service ProcessingMaintenance and Service Orders-Scheduling--External Scheduling--Define for Each Order Type                                                                               
Once this flag is removed for order type SM01, this tab will appear       
for service orders.                                                       
Regards,
Amar

Similar Messages

  • Assignemnt field (ZUONR) not updating for Service Order RAS

    Hello Experts,
    I am facing an issue in service order RAS (Order Related Billing), here assignment field (VBRK-ZUONR and BSEG-ZUONR) is not updating against document type RV.
    Same is not reflected against customer in FBL5N also.
    Please suggest.
    Regards
    Rajat

    Hi
    Check the copy rules in tcode VTFL and/or VTFA. Check the field for assignment number. Check also the VOFM subroutines.
    Also, check Note 301077 - User exits for the interface to accounting to change the value of ZUONR in BSEG (in ACCIT in the interface of this FM)
    Regards
    Eduardo

  • Resp Person Tab is not coming in CJ20N for a particular project type

    Hi All,
    I am unaware of the standard SAP screen in CJ20N but we have a screen in CJ20n wherein we can assign a person / link a person this particular tab is not coming at all for a particular project type (Resp Person) rather a different tab (cust enhancement) is coming but our problem is we have a mass program which works on BDC and hence if the required screens are not there it fails.
    Can someone please tell me if there is come config i can check/ maintain for this resp person tab so that it starts coming for all project types.
    Regards
    Anmol Pareek

    Hey Sarang,
    Thanks a lot, it was helpful, one more thing though, In Resp Persons tab there is something called Link Employees and my problem is that i have a mass linking program (using BDC) which cannot work if i dont see that screen in my BDC (without changing BDC). The way you have told is in OPUK/ OPUJ check for proj type and see if person responsible is hidden or not. I dont think that is what i am asking because no matter what this person responsible is hidden, but for certain project types Resp Person tab itself is not coming and that is the problem.
    Regards
    anmol

  • POP UP is not coming for Partner selection in WEB UI (Service Request)

    Hi,
    I am working on Service Request right now. I have entered the customer number which has multiple bill to party's. But, on entering the customer number, the system is not displaying popup for Bill To Party. It is filling the first partner as default.
    I have checked the partner determination which is used for sales order as well. However, for sales order the popup is coming.
    I am not able to understand why the same config is working for sales order, and not working for Service Request.
    Could you please help, where I need to check, and how I need to resolve this.
    Thanks,
    Sandeep

    Hi,
    in the partner determination procedure check for bill-to-party if the field "Select. limit" is set to 0.
      Defines how many partners must be found, for this partner function, for
      a selection list to be displayed in the transaction during partner
      determination
    If this is set you should create an OSS message.
    Kind regards
    Manfred

  • Login page not coming up - 11.5.10.2????

    HI,
    APPL- 11.5.10.2
    DB-10gR2
    OS-RHEL 4.6
    http://dbs5.dbs.com:8000/oa_servlets/AppsLogin--
    Login page not coming up .. blank screen..
    Recent change - nothing .....
    access log ----
    172.16.200.145 - - [31/Mar/2011:07:30:53 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.200.145 - - [31/Mar/2011:07:30:56 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.200.145 - - [31/Mar/2011:07:31:10 +0400] "GET / HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:31:10 +0400] "GET /apptitle.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:31:10 +0400] "GET /appdet.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:31:10 +0400] "GET /applist.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:31:10 +0400] "GET /appsmed3.gif HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:31:12 +0400] "GET /aplogon.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:31:13 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.110.92 - - [31/Mar/2011:07:35:55 +0400] "GET / HTTP/1.1" 200 2591 0
    172.16.110.92 - - [31/Mar/2011:07:35:56 +0400] "GET /apptitle.html HTTP/1.1" 200 1017 0
    172.16.110.92 - - [31/Mar/2011:07:35:56 +0400] "GET /applist.html HTTP/1.1" 200 1612 0
    172.16.110.92 - - [31/Mar/2011:07:35:56 +0400] "GET /appdet.html HTTP/1.1" 200 1011 0
    172.16.110.92 - - [31/Mar/2011:07:35:56 +0400] "GET /appsmed3.gif HTTP/1.1" 200 1981 0
    172.16.110.92 - - [31/Mar/2011:07:35:56 +0400] "GET /favicon.ico HTTP/1.1" 404 217 0
    172.16.110.92 - - [31/Mar/2011:07:35:57 +0400] "GET /aplogon.html HTTP/1.1" 200 1953 0
    172.16.110.92 - - [31/Mar/2011:07:35:59 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.110.92 - - [31/Mar/2011:07:35:59 +0400] "GET /favicon.ico HTTP/1.1" 404 217 0
    172.16.110.92 - - [31/Mar/2011:07:36:11 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.110.92 - - [31/Mar/2011:07:36:11 +0400] "GET /favicon.ico HTTP/1.1" 404 217 0
    172.16.110.92 - - [31/Mar/2011:07:36:15 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.110.92 - - [31/Mar/2011:07:36:17 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.110.92 - - [31/Mar/2011:07:36:18 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.110.92 - - [31/Mar/2011:07:36:20 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.110.92 - - [31/Mar/2011:07:36:22 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    dbs5.dbs.com - - [31/Mar/2011:07:39:38 +0400] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19000 HTTP/1.1" 200 15 0
    dbs5.dbs.com - - [31/Mar/2011:07:39:38 +0400] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=DiscoGroup&port=17000 HTTP/1.1" 200 15 0
    dbs5.dbs.com - - [31/Mar/2011:07:39:38 +0400] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=OACoreGroup&port=16000 HTTP/1.1" 200 15 0
    172.16.110.92 - - [31/Mar/2011:07:39:52 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.200.145 - - [31/Mar/2011:07:40:12 +0400] "GET / HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:40:12 +0400] "GET /apptitle.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:40:12 +0400] "GET /appdet.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:40:12 +0400] "GET /applist.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:40:12 +0400] "GET /appsmed3.gif HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:40:14 +0400] "GET /aplogon.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:40:15 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0
    172.16.200.145 - - [31/Mar/2011:07:47:01 +0400] "GET / HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:47:01 +0400] "GET /apptitle.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:47:01 +0400] "GET /appdet.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:47:01 +0400] "GET /applist.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:47:01 +0400] "GET /appsmed3.gif HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:47:02 +0400] "GET /aplogon.html HTTP/1.1" 304 - 0
    172.16.200.145 - - [31/Mar/2011:07:47:03 +0400] "GET /oa_servlets/AppsLogin HTTP/1.1" 200 5 0

    If the Autoconfig doesnt help, you might want to raise an SR, and you will also need to start debugging on Apache / JServ for more information. Steps to do this I once saved, and are pasted below:
    Enable Apache debug as follows
    a.cd $IAS_ORACLE_HOME/Apache/Apache/logs
    delete or backup all the log files
    b.cd $IAS_ORACLE_HOME/Apache/Jserv/logs
    delete or backup all log files
    c.cd $IAS_ORACLE_HOME/Jserv/logs/jvm/
    delete or backup the files
    e.vi $IAS_ORACLE_HOME/Apache/Apache/conf/httpd.conf
    Set LogLevel debug
    f.vi $IAS_ORACLE_HOME/Apache/Jserv/etc/jserv.conf
    Set ApJServLogLevel debug
    g.vi $IAS_ORACLE_HOME/Apache/Jserv/etc/jserv.properties
    Set following:
    log=true....
    log.file=//../<SID>_ora/iAS/Apache/Jserv/logs/jserv.log
    log.timestamp=true
    log.channel=true...
    log.channel.info=true....
    log.channel.jservException=true
    log.channel.warning=true
    log.channel.servletLog=true
    log.channel.critical=true
    log.channel.debug=true.....
    Restart the Apache Server
    cd $COMMON_TOP/admin/scripts/<SID>_<host_name>
    sh adapcctl.sh start
    -------------Apache Bounce & Enabling Debug End----------------------------------------
    Note:- Revert the changes after reproducing the issue, as Enabling Debug in Apache result in
    Performance overhead.
    Reproduce the issue
    Upload the FRESH Logs from following Directories in ZIP Format.
    1.From "$IAS_ORACLE_HOME/Apache/Apache/logs"
    2.From "$IAS_ORACLE_HOME/Apache/Jserv/logs"
    3.From "$IAS_ORACLE_HOME/Apache/Jserv/logs/jvm"
    Also, if you are just getting a blank screen then you might want to recompile JSPs via adadmin.
    DA
    Edited by: Dan A on Mar 31, 2011 5:28 AM

  • Cancelling the GR the excise item tab is not coming after flagging the OK

    Hi SAP Experts,
    there is one subcon PO for excisable material for depot, after its GR it have been posted from j1iex.
    Now there is a requirement to cancel the excise posting for which first of all its GRN should be cancel.
    But while cancelling the GR the excise item tab is not coming after flagging the OK.
    This problem is there only for the depot, for other plant Im able to cancel for subcon PO.
    Thanks & Regards,
    Anisha Sinha

    still not cleared

  • In QM view Inspection Setup data tab is not coming

    Hi Friends
    I want to assign inspection type to a material, plant combination but in QM view Inspection Setup data tab is not coming
    Thanks & Regards
    Gajendranath

    Hi gajendra,
    Inspection set up data in QM view will appear only when you select quality view & maintain any plant releted data at the time of material creation .If you dont maintain any plant releted data then QM view then insp set up data will not appear. so please o through mm01 once again select QM view & maintain plant data, then next time insp set up data will appear.

  • Unable to assign supplier in shopping cart for services in SRM 7.0 SC

    One particular user is Unable to assign supplier in shopping cart for services in SRM 7.0 Shopping Cart.  There is no difference in the roles assigned to him.  He is able to assign supplier for materials but not services.  Any suggestions?
    Thanks
    Sanjeev

    Hi
    From where he is buying the Services - free text or catalog or service masters.
    Do you have other users having same problem?
    Have you built a custom role in your landscape. Assign SAP All to his role temporarily and see if that happens again. If so, activate the Trace on his id and ask him to order a service SC to find out where he is missing the authorizations....
    Regards
    Virender Singh

  • Recently Closed Tabs is not working for me

    Recently closed tabs is not working for me. Whenever I go to History -> recently closed tabs is not available and the shortcut does not work. It happened a few weeks ago and when it first happened, the shortcut would open tabs from weeks earlier. I can't find any information on this and would like to see it fixed.

    There are other things that need your attention regarding modified prefs that show in your system details list.
    Reset the general.useragent.compatMode.firefox to false and all network.http prefs on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config
    What is the value of the browser.sessionstore.max_tabs_undo pref?
    * http://kb.mozillazine.org/browser.sessionstore.max_tabs_undo
    * http://kb.mozillazine.org/browser.sessionstore.max_windows_undo

  • How can i print all the tab pages not just the first page (tab)

    how can i print all the tab pages not just the first page (tab)

    You would need to do this programmatically. Here's one way:
    Attachments:
    Example_VI_BD6.png ‏3 KB

  • Accounting entry against Excise invoice not created  for Service Tax sales

    Dear all,
        I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
    Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco)  - Domestic(Customer receivable reconciallation) account-Credit entry.
      But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
    Plz. suggest step by step guideline to resolve this issue.
    Thanks & Regards,
    Mukesh Pardeshi

    Hi ReazuddinMD,
    thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
    Now i am geeting error as below at the time of saving Excise invoice,
    No account is specified in item 0000000001
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000000001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

  • Excise tab is not coming in MIGO

    Dear All ,
                                     pl help that as user is trying to do G.R wrt inb. delv , let me brief out user had made a qty contract with an import vendor itis having two line items , now an Rel order ( material ) is created wrt this qty contract., now as user is trying  to do GR wrt inbound delv so for first line item excise tab is displaying & the ex. tab is not displying for second line item , even i had checked in J1ID for mat & chap i.d combination it is maint. here , pl guide what else to check.
    rgds,
    sap11

    The process is as below;
    1. ME21N - Create Import PO
    2. MIRO - Customs Invoice
    3. J1IEX - Capture Bill of Entry
    4. MIGO - GR w.r.t. Import PO
    5. J1IEX - Post Bill of Entry
    6. MIRO - Import Vendor Invoice
    7. MIRO - Clearing Agent Invoice
    Please check the following
    Follow the exactly same process as suggested above.
    J1ID - Maintain Excise Indicator as 1 and rest all Excise Details as "NA" for Import Vendor (Also check for Material & Chapter ID Combination, CENVAT Determination, Excise Tax Rates, etc...)
    ME21N - Import PO should have a Zero % Tax Code.
    Maintain Number range in J1I9 for objects.
    Regards

  • C4C & Lotus Notes integration for service users

    Hi,
    I tried to find information about C4C and Lotus Notes integration for service users without success. User manual says on Sales both Outlook and Notes, but in Service only Outlook. Does Lotus Notes add-in work for service users similar than sales users? Is there anywhere demo video for that? I can only found demo video for sales (SAP Sales OnDemand Outlook Integration Demo (new) - YouTube).
    -Aatos

    Hi Aatos,
    The Lotus notes integration currently supports the "Field Service" role in Cloud for Service where you are primarily servicing customers in the the field and have direct email communications with your customers. In this use-case, similar to "Field Sales" (AKA SFA Users) in Cloud for Sales, you can receive an email from a customer, get information about that customer from Cloud for Customer via the Lotus Integration, and be able to upload that email into Cloud for Customer as an email activity to track the email correspondence between the user and the customer.
    However, the Lotus notes integration does not support the "Call Center" role in Cloud for Service where you are a contact center agent in a centralized service center processing emails that are routed into a common inbox and all correspondence is sent out in behalf of a central inbox such as [email protected] In this usecase all emails automatically create tickets and all emails both inbound and outbound are automatically recorded as email activities without customer or user intervention. The email client for this usecase is either a C4C email client or Windows Outlook Client as you found in the documentation.
    Thanks,
    Rei

  • BAPI_NETWORK_COMP_ADD     Component assignment not intended for sales order

    Dear,
    I have problem when I use the function:
      CALL FUNCTION 'BAPI_NETWORK_COMP_ADD'
        EXPORTING
          number           = number
        IMPORTING
          return           = return
        TABLES
          i_components_add = i_components_add
          e_message_table  = e_message_table.
    I have inserted only these values  in the structure i_components_add:
    ACTIVITY_TYPE_PUR_RESV__ITEM_NR____MATERIAL_________PLANT___ENTRY_QTY___ITEM_CAT
    108--8101TAH052000110025.460--
    L
    108--8204RAVBLA098SL0111002.000--
    L
    108--83034R000000011004.160--
    L
    but the result is wrong
    e_message_table:
    METHOD--C--
    32                                                                               
    OBJECT_TYPE--C--
    32                                                                               
    INTERNAL_OBJECT_ID---C--
    90                                                                               
    EXTERNAL_OBJECT_ID--C90-----0108 0010 1TAH052000 1100
    MESSAGE_ID--C20-----CNIF_MAT
    MESSAGE_NUMBER--C3--
    1
    MESSAGE_TYPE--C1--
    E
    MESSAGE_TEXT--C72--
    Component assignment not intended for sales order or project stock
    Very kind for one answer of yours to this problem...
    Thanks & Regards,
    Marco Echino.
    Edited by: Marco Echino on Sep 8, 2011 12:16 PM

    Hi Marco,
    I believe this is a Functional Issue rather than a Technical one. If you could speak to the Functional Concultant or pass this data via manual transaction, you will get the error details.
    It's just that the data passed to the BAPI is either incorrect or incomplete. You can also refer the Function Module Documentation for tips.
    Regards,
    Pranav.

  • Is the update page not working for  of our devices.

    Is the update page not working for apps? I cannot get it to load with any of our devices. iPhones or iPads?

    There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
    http://www.apple.com/support/systemstatus/

Maybe you are looking for