Req deletion

hi,
i have a req wich is not getting deleted.... i heard tht thier is a prog to del the req .... but dnt have it ...
plz tell me a way to delete that req or plzz give me tht prog plzz.
Regards,
Akki

Hi,
Delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
The request will be removed from your ODS.
Note 947481 - P32:ODS: Deleting partially active non-condensed requests
Hope this helps.
Thanks,
JituK

Similar Messages

MRP-Dependenat req deletion -reg

Suppose a finished product is put PIRs through MD61 and run MRP , dependent requirements are generated for the BOM child parts of the finished product .
Latter when I do planning for the same finished product subsequently for the next time periods ,through MD61 , ,,,,what is happening is though I am deleting the existing planned orders of the finished product , dependent requirements of the child parts are still remaining ,not getting deleted automatically , because of which system is considering these dependent req as demand and generating procurement proposals for these old dep req quantities also .
How to avoid these ?
How to delete the existing , unused PIRs ?through MD75/76??
How to delete the existing ,unserviced planned orders ?through MD16?
Most importantly how to delete the dependent requirements of the child parts ? or how to set the system not to consider these old /existing dep requirements for generating procurement proposals during MRP run ?
Please provide necessary inputs
Madhu Kiran
SAP-PP

hi ,
i have tried like that only
i have deleted PIRs through MD62 and then run MRP for the finished product using planning mode 3
i ahve run MRP through MD02 for the finished product , with display results before save option and when MRP is run , first for finished part MRP results showing nothing , next save then when it is going to Child parts it is showing the old DEP req also ..... for example which is of 2001 year also being shown
any setting to be done for MRP ??????
procedure through screen shot would highly appreaciated
thanks
madhu kiran

Shopping cart deletion to purchase req. deletion

Hi Experts,
Scenario: Classic
We have a shopping cart with followon doc as Purchase requsition.
Question: When we delete the the shopping cart, this does not delete the purchase requsition in backend system. WHY?
How can we achieve this ?
Thanks and regards,
Anil

Did you run Clean_reqreq_up and BBP_get_status_2?
Is there any change version for the SC which need approval or got an error?
Is there any error in RZ20?
When a shopping cart is created and follow-on documents are further
created, the deletion is possible based on the following criteria.
The following is the standard behaviour:
SC ->PO : deletion possible
SC ->PRequisition: deletion possible
SC ->PRequisition - PO: deletion NOT possible
SC ->PO - conf. goods : deletion NOT possible
SC ->PRequisition - PO - conf. goods : deletion NOT possible
SC ->PO - conf. goods - enter invoice: deletion NOT possible
SC -PRequisition - PO - conf. goods -enter invoice:deletion NOT possible
Hope this information is helpful for you.
Regards
Lauren

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

I'm running iTunes 10.5 on my Macbook Pro and software 4.1 on my 2g iPod touch and having problems getting photo's to sync. Same error iPod can't be synced req'd file can't be found. Tried deleting the photo cache, restoring the iPod etc but to no avail.

I'm running iTunes 10.5 on my Macbook Pro and software 4.1 on my 2g iPod touch and having problems getting photo's to sync. Same error, "iPod can't be synced req'd file can't be found". Tried deleting the photo cache, restoring the iPod etc but to no avail.

Try here:
iTunes: Unable to sync photos
Usually deleting the iPod Photo Cache Folder works. Note that if you sync via the folder method, make sure you dlete all the ifolders since :
The iPod Photo Cache stores the photos that are optimized for display on your iPod, iPad, or iPhone. The location of this folder depends on the syncing options you select. In iTunes, if you change the selection in the “Sync Photos From” pop-up menu, a new iPod Photo Cache folder will be created (and the previous folder will remain).

Create PO against a deleted P/REQ

Hi:
How can I prevent users to place a PO against a REQ if the P/REQ was already deleted without changing SAP standard.
Thanks.
W.

Hi,
Change the *MESAAGE NO:050 - Purchase requisition & item & already deleted* warning message to error message in SPRO > Materials Management > Purchasing > Environment Data > Define attributes of system messages.
Regards,
Prabu

Delete SC when req. number ia assigned

Hi Experts,
I am facing a problem.
I have created a SC without the vendor is assigned. SRM try to create a Req. but no numberrange has been set up in back-end. In table BBP_PDBEI a Req. number is assigned to the SC, comming from SRM. No Reg. is created in back-end. How do I delete this SC? I have tried FM: BBP_PD_SC_DB_DELETE with a commit afterwards. This did not delete the SC.
Best regards Kim Oster

Hi Kim,
Pls check my document below, this may help you.
Deleting Shopping Cart through Function module
Best regards,
Anil

Delete a Req Line

I put in a bad Req line. When I hit the trashcan it puts a trashcan icon under the Status column. However, it never goes away. If I save and come back in it still shows in the list. If I try to convert the req to a PO it lets me convert the line marked for deletion.
How do I permanently delete a Req line?

Dear Kris,
when u mark as delete inline item than it is permanently deleted after save the PO. But is show in PO as Trash Icon. That line item store in SAP audit tables u can say in Archival table. This is Basically use for Audit Purpose.
U can remove the Line item from PO. It will dispaly as Trash Folder.
Regards,
Pravin Kadam.

Deleting DTP LOCKED Req for OHD-3rd party tool

Hi Gurus,
As a part of one of my scenario i had created a OHD with type 3rd party tool.Till yesterday it worked fine.Today PC got failed with exception DTP req locked.I understand that earlier DTP req failed and pc triggered the DTP again it causes the issue.Now i would like to know that is there any way to delete the failed req.I'm using IBM Data stage as a target the OHD.
Regards,
Rambabu

Hi Mates,
I already tried all the options mentioned by you from morning onwards.But didn't helped out.
@Nanreshsing: i had followed the note it says to run the report RSBK_DEL_DTP_REQ_FROM_OHD as suggested by Suman too
@Ramanjaneyulu: My first action after getting the error was checking the thread which you mentioned in the reply.
I tried to go to db tables and checked for the req and then changing the status,and to another table etc and then a fm and then a report mentioned above.
After performing all the actions i got the message that no req was deleted from the OHD from the above report.
Regards,
Rambabu

Reg: Deleting Independent req. in mD04 Sceen

hi,
can anyone explain me, how to delete ind.req. generated due to MRP -Run in MD04.
Edited by: dayanan on Oct 13, 2010 3:23 PM
Edited by: dayanan on Oct 13, 2010 3:28 PM

Hi
If you want to Delete them, while you are in, MD04 screen itself,
Click on Element deatils ( Lens Icon) of the corresponding PIR,
then it will take you to the MD62 screen directly.
There you can select the entire row , then click on delete Icon , It will remove all the PIRs of that material & then Save
Even you can change the quantities, if you don't want to delete them completely. ( After change Save)
OR
Use T code : MD62, you can do the same as explained above
Either you can Delete all (or), you can change the quantities.
After this change, come to MD04, then Refresh
Hope, this will help you.
Regards
BRSR

Optimizer run did not delete Deployment: Release for stk transf. req

Hi Gurus,
I would like to know if the "Deployment: Release for stk transf. req" is also the result of the SNP optimizer run? If not, should this be expected to disappear in the system once the optimizer run is finished because this "Deployment: Release for stk transf. req" still exist in the system even after the optimizer run. Is it normal to have this in the system? If not, what are the factors why this still exist in the system? What are the process on how to delete this?
Your expertise will be very much appreciated.
Thanks

Hi Ann,
"Deployment: Release for stk transf. req(category EG/EF)" is a deployment order generated by a deployment run and has nothing to SNP optimizer run. SNP optimizer creates planned/purchaser requsitions but does not create/delete deployment orders.
You need to run deployment with a "delete" option to delete and make the system delete the existing deployments and recreate new ones.
Here is the flow.
Lets say you have 1 DC being sourced from 1Plant.
You have a demand of 100PCs.
1. When you run the SNP optimizer, the system looks at the transportation lane, costs etc. Since this is 1 DC 1 Plant, the system just creates a stock transfer order at the plant for 100 PCs.
2. Then you run SNP/PPDS planning run at the plant depending on the SNP planning horizon. Assuming the SNP planning horizon is 0 days (no PPDS run here), the system creates a planned order for the 100PCs (this can be more depending on the lot size).
3. Then you run deployment. The deployment looks at the plant and DC, there is a requirement of 100 PCs and a receipt of 100PCs at the plant.
The system deletes the stock transfer of 100 PCs at the plant and creates a deployment order of 100 PCs at the plant.
A deployment run replaces a stock transfer. But a SNP optimizer run simply creates a planned order at the plant but does not ever change the deployment order.
Hope this answers your question.

System log - how to find out who has deleted the req from cube.

^hello friends
how can i find out who has deleted the request from cube ?
i wanted to check the system log , that who has deleted the request from cube .
could you please let me know how to check the same ?
regards
manoj

Hi,
Did you try the method I had suggested. It will work.
Also its better to try the path I had suggested as it will display the logs for that particular Cube only.
But if go through SM37 > B_DEL* it will display all the logs for all the deletion jobs not just this cube and it will be difficult to find out.
Try that and you should get the log.
Thanks,
JituK

Reset deletion indicator in Purchase Req

Hi Frnds,
Any FM or BAPI to reset the deleted the Purchase Requitition?
to reset the field "LOEKZ" value to blank...
Mass Update FM would be preferrable.
Regards,
Karthick C

Hi karthikk,
please try FM BAPI_PO_CHANGE parameter POHEADER/POHEADERX field DELETE_IND.
AFAIK the deletion indicator for items is connected to the statistical item indicator STAPO. STAPO is set automatically together with LOEKZ on item level - so it should be reset as well, but I did not try. Fields on item level have same name but are in TABLES parameter POITEM/POITEMX.
Addition Mass update: Process the orders in a loop, call FM for each of them and after commit intervall call BAPI_TRANSACTION_COMMIT.
I don't know what kind of locks are set. You can set the COMMIT interval to 10000 and see if you end up in a lock table overflow.
Regards,
Clemens
Message was edited by:
Clemens Li

How to find the deleted transport req logs.

Hello gurus,
in my DEV box some body was deleted the transport request.
i need to know that by whom that request was deleted. the thing is that request was not released and not imported into any system. that request was deleted after the creation.
but now i am confused how to check the logs. i have searched the log file in trans directory and also SLOG,ALOG.
i guess there is no use of import history in STMS because that request not existed in the system?
then how can i find the deleted person. and time.
Could you please do let me know.
help would be heighly appreciated.
Regards,
srini.

hi!
Are you sure that the transport request was deleted?
Perhaps Transport request is a local transport and when you release the transport it will not create the export files.
FF

Purch Req get deleted once the maintenance order is TECO'ed

Guys,
Purchase requistion is automatically get deleted once I do the TECO, I think there should be a config to restrict this. Could anyopne knwo what I need to do for this. Thanks.

Hi Praveen ,
TECO is assigned to work which is Technically completed (Physical work completed ).
When Maintenance work required for the Order is completed , it means that excess material and services planned are no longer required.
Hence Purchase requisition is automatically get deleted once you do the TECO .
Any purchase requisitions that have not been converted into purchase orders are deleted . This is standard functionality.
Though system allows you to do the following
a)Locked or Unlocked
b)Set deletion flag
c) you can still post some cost like invoice receipt for material delivered or consumed
User Exits will surely help you in this Scenario , Your ABAP team will be able to help you here .
Regards
Arif

Req deletion

Similar Messages

Maybe you are looking for