Req for tbirdparis re: arrange page tips

Hello there tbirdparis, in a previous thread you mentioned using blank tracks and such to make your arrange page more orderly and easier to use. Would you be willing to post a screenshot of this?
Thanks for your time...

good one dave. I will do so. if I have any difficulty figuring out how to upload, I'll get in touch.
will get to itafter I hit my deadline.

Similar Messages

Quick Key for opening a region from the arrange page

Guys is their a quick command to open a region from the arrange page into the sample editor?
Thanks

Hi
I think you can set one up in the key commands.
Bron
G5 1.8/ 3GB Ram Logic Pro 7.1.1 Mac OS X (10.4.6)

New audio track in arrange page problem

In the LSA I have 64 audio tracks and 32 audio instruments set up. When I open Logic, my autoload contains 16 audio tracks and my environment is configured as I set it up in the LSA. Everything is as it should be. However, when I select track 16 in the arrange page and use the key command control>shift>return to add another track, audio16 is duplicated. When I use the menu to 'create with next instrument' audio17 is created, but in my environment, my 64 audio tracks are reduced to 24. Using the menu to add audio tracks only lets me add to 24.
I've trashed my preferences but that did nothing.
One thing that may be relevant is that after setting up the LSA as described above, I copied an old autoload from my powerbook that only contained 24 audio tracks. After realizing that I need more tracks I trashed that autoload and re-ran the LSA. (on a side note - your autoload will trump your LSA set-up if they differ). I think that the old autoload is still causing a problem even though I trashed it.
Any help in the frustrating situation is most appreciated!

It is normal that Logic uses the same audio object
when you create a track with control-shift-return,
that's the way it's supposed to be. If you want to
create a new track and a new audio object assigned to
it, "create with next instrument" is the way to do
it. You could also use "create multiple..."
in the drop down menu it says that the key command for 'create with next instrument' is control>shift>return.
If you're limited to 24 tracks, I'd check in your
audio preferences. Your maximum tracks limit is
probably set to 24 tracks.
my audio preferences are set to 64 tracks of audio.
thanks for the reply!

Drag and drop to re-arrange pages

how do I re-arrange page numbers?
I have tried to drag and drop from the left pane (page thumnails), but when I do this it grabs a group of pages and tries to move the whole group.(3 to 4 pages at a time)
I do not have the option of unchecking "Ungroup" under the Arrange tab.
Using an OLD Version 2.0.2
Sorry if this a duplicate question, but it did not come up in the search field.
Thanks for any help in advance.

@Jerrold Thanks for the feed back, this did seem to work for me, but sometimes creating a section break, also creates a new blank page in between sections, so then I had to delete that page.
I agree with jamills, it seemed like the old version worked fine, from what I remember, although I dont use Pages very often and it has been a while since I have created a document that was more than a few pages and had to re-order them. so I could be wrong on that also.
Thanks Again for the feedback,

Re-order tracks on arrange page

Hi, maybe this sounds stupid but for some reason i cant re-order tracks on the arrange page. I think you can do it dragging and drop each track with the "hand" ... right? or no...
i'm lost here and this really break my head cause then is a kaos when i'm mixing!...
Any help?
Thanks!

Hi there... sorry for the confusion... i what i mean was *at the mixer window*... so i can arrange the tracks, sub-groups, buses etc... not at the arrange!!
thanks!

IDCS 1.0 How to arrange pages to print brochure?

I'm qualified to do fairly simple documents on IDCS 1.0, but that's all. I've done a twelve page brochure to be read by scrolling one page after another. Now, I need to prepare a version that can be run on a FedEx-Kinkos' Xerox Docucolor printer to produce a printed brochure that can be stapled in the middle and folded in half to make it look like a book with text and artwork on every page. I understand that page 1 needs to be on the first page on the right side (of the facing pages) and page 12 on the left and that on the back of that page, call it the second page, page 2 is on the left and page 11 on the right and so forth until all pages are finished. The printer will first print facing pages on the "front" of a page and then turn the page over and print the next set of facing pages on the "back" of that same page and then print on the "front" of the next page and so forth. Please forgive me for using the word "pages" for two different things, but I don't know any other words to describe what I'm trying to do.
I've never done this before and I can't really make sense of ID's help items. I opened a new document with the intent of copying a page from the source document and pasting it in the appropriate location on the new, destination document. I tried to set up facing pages to get this going, but I always get a single page at the beginning and another single page at the end of the document. I can't get them all to be facing pages.
Questions:
1. Is there a way to get IDCS 1.0 to do the desired arranging automatically by operating on a second copy of the single paged (non facing) document?
2. If not, how do I get the pages window to show only facing pages. It seems stuck with a single page at the beginning and another single at the end of the document. I'd appreciate very much being pointed in the right direction. Thanks.

You are correct. InBooklet SE was no longer available to Adobe after Quark bought ALAP. Adobe did replace the functionality to some degree with a "print booklet" feature for output. However, it cannot be used for PDF export.
Our recommendation is generally that page imposition is absolutely not an appropriate task to be performed in a page layout program which better handles pages in logical page order. Imposition is best performed by the print service provider at the RIP or via their PDF workflow software. Another very good solution is to impose the document (whether doing n-up, step-and-repeat, booklets, etc.) in Acrobat. Simple booklets can be readily printed by Acrobat Pro. More complex imposition tasks yielding a new, fully imposed PDF file of print flats can be handled by some third party plug-ins for Acrobat including Quite Software's "Quite Imposing" and "Quite Imposing Plus.
- Dov

Strange Error Message after Adding Apple Loops to Arrange Page

after dragging some apple loops onto arrange page. i'm getting this error message." audio file "drone Bellos 01 .caf hasn't got sufficient access privilidges so the overview canot be saved. any ideas why this is happening?
thanks

Yes, some of the Apple loops are protected (Jobs knows why). You can change this by searching the file in the finder with spotlight, then hit apple+i->menue opens->click into the lock->set your permissions to "read and write"->done. Unfortunately this procedure has to be performed seperately for each protected loop.

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

Why does yahoo open when I click for a new Firefox page?

Ever since the new upgrade, when I click for a new Firefox page, I get Yahoo. I don't want Yahoo searching. I want a new Firefox page. Yahoo Search is not in my add-ins or in Program to Delete. How do I rid of it?

hello, please try to [[Reset Firefox – easily fix most problems|reset firefox]] and see if this can address the issue...

How do i get that bar to appear on the screen for http and web pages?

How do i get that bar to appear on top of the screen for http and web pages?

Yes im using safari version 5.1.2 (6534.52.7) I have tried clicking show toolbar from the view menu but i still can't see it. It's the bar where you type in a website link or http:// that I can find - any other suggestions much appreciated

The spell check for arabic language in pages v 5.2 are Not working ! please Help !

The spell check for arabic language in pages v 5.2 in mavericks are Not working ! please Help !

MANKWT wrote:
No i Did Not !
Perhaps you can find an Arabic dictionary for OpenOffice. That may also work with OS X.
http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

You may need to reset your network settings, making sure the network you're accessing is stable: tap Settings > General > Reset > Reset Network Settings.
If your iPhone still can't connect to App Store, tap Settings > iTunes & App Store > tap the Apple ID and sign out > later, sign in with your Apple ID.

Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but worked only in Mail. Lost formatting when just copied and pasted in email.

Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but PDF worked only in Mail. Word worked in nothing. I also tried copying and pasting the document but lost all formatting when just copied and pasted in email. Is there a way to do this?

Are you sure PDF won't work? It should as what you're trying to do is pretty much what it is designed for (PDF - Portable Document Format). On a Mac anywone who receives the file should be able to see it in all its page layout glory by using the app Preview or Adobe Reader. Same on a PC, the file should be viewable as a PDF file using Adobe Reader and probably some other viewer (don't use PCs so not sure what other apps).
What application are you creating the file in and are you sure you're exporting it correctly in PDF format, fonts and images embedded?

Why is there no support for RTF files in Pages?

Why is there no support for RTF files in Pages?
This is nuts!

You are not alone.
Actions speak louder than words, but Apple does manage to still distract many from what is self evident before them.
I am astonished by those who swear that non-existent features, or features that pre-exist the current version make Pages 5.2 a major upgrade.
An affect that does seem to wear off with familiarity, as each version of Pages 5 gets a boost in the App Store, only to see the disapproval rating surge back again.
Pages was always one of the top purchases in the App Store, now it doesn't even rate.
Peter

I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages. If I type it won't

I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages. If I type it won't continue in Hebrew. I have tried downloading several fonts, including those from professional societies, but the only way to get Hebrew in my document is to cut and paste. Does anyone know how to fix this? I use an older MacBook running OS 10.9.1. I used to do my Hebrew work in Word, but it is no longer supported by Mac OS.

Just clarifying:
Pages '09 has bad support for Hebrew, Arabic etc but will accept pasted text.
Pages 5 has much better support but with bugs.
If you have columns they are in the wrong order ie Text starts in the left column and ends in the right column.
If you type English into Hebrew text it tends to fall in the wrong position eg instead of to the left of Hebrew punctuation it goes to the right.
As Tom recommends the only real solution on the Mac is Mellel.
Peter
btw Tell Apple, they are amazingly slow to fix this running sore which has been broken since RtoL was supposedly introduced in OSX 10.2.3 over a decade ago.
Peter

Req for tbirdparis re: arrange page tips

Similar Messages

Maybe you are looking for