Req. Plan Number (MD61)

Hi, We have changed the planning stragegy (Consume planning without assembly to Consume Planning WITH assmebly).
Every thing is working per our requiement. However, all materials created before the configuration changes takes place are still pointing to the "OLD" config. I was able to delete the forecast and create new forecast using the Req. Planning number, this marked the line in table PBIM as deleted and created a new line in PBIM which pointed to the new config.
We receive the forecast from APO. I have deleted the forecast in R/3 and when APO sent the new forecast, it just activated the old config. but did not "replan".
I am not familiar with APO, and our APO team is releatively new to this. Is there a way APO can replan instead of just sending forecast?. What should I tell the APO team to look into.
Or Is there a way in R/3 to replan and move existing old forecast to point to new configuration?.
Thank you in advance for your helpl.
-Giri

Hi,
   Either change the Planning horizon dates manually in the initial screen on MD61 or use T-code OMPD - Assign default values & presettings in PIR and change the value in the Planning horizon field.
Now the dates wil lie within the factory calendor.
  Try this..
-Thaila Shree

Similar Messages

  • Table/Field for the requirements plan number.

    Hi,
    I need the Table for requirement plan number (that I display in MD61)
    Tablename and Fieldname.
    Thanks

    Pass the material and plant in PBIM and fetch the BDZEI- By using BDZEI and   date (PDATU-PBED), fetch the (PLMNG- PBED )as planned qty, UOM as ( MEINS-PBED) and date (PDATU-PBED) system.

  • Customize the requirements plan number

    Hi,
    where can I customize the requirements plan number.
    Thanks
    Dede

    In MD61 you can enter a reqmt. plan number as per your need, anything preventing you from entering the same?
    or if the business need is something else, then can you let us know the same

  • How to Run MRP with requirement Plan Number

    Dear all,
    I am working for the process of MRP Run .But customer requirement is that "To Run the MRP with requirement Plan Number"
    If you are aware of this scenario ,please provide the solution.
    Thanksin Advance

    Go to MD61
    Select the Radio Button Rqt Plan Number
    Write the plan number eg. "test1"
    now you get the next screen
    Here you can enter the materials like
    first line Testmat1 -qty 100   150 ....
    2nd line Testmat2 -qty 150    100
    like that
    So the difference between MD61 with Material and Rqt Plan number is
    Material means we give requirement for only one material
    But for Requirment plan number , w.r.t one Rqt Plan number we can maintain requirement for multiple material
    same material with same period we can maintain requitement for Different Requirement Plan number
    This is reducing effort of client of data entry and for different sales Regions for the same material through "Rqt Plan No" they can differentiate the rqt
    MRP run run it for PLANT or multiple plant with Scope of Planning
    thanks
    Pl award points if useful
    K.Prabakaran

  • Requirement plan number is to be populated in production order

    Hi all,
    Can anyone suggest how Requirement Plan Number given in MD61 can be populated in production order.
    This is urgent.
    Thanks
    KumaraGuru

    Hi Kumra,
    When we create the Requirement Plan number in MD61 it is updated at PBIM table. And after running the MRP, Requirement plan number (PBDNR) is updated in the PLAF  ( Planned Order Header ) Table.
    I am not sure about, it can be populated in production order.
    Le tus know your requirement so that we can help u further.
    Regards,
    R.Brahmankar

  • Requirements Plan Number - PLAF Table

    Hai PP Gurus,
    Requirement plan number not updating in the PLAF table.
    What would be the reason?
    Pls throw some light on this.
    Thanks & Regards,
    S.Ganeshraja

    Hi ganesh,
    Before using the fuction module use following table.
    PBHI.
    list out the all the data on particular date (PDATU).
    PBIM:
    Pass the all records with refernce to
    PBHI- BDZEI -> PBIM-BDZEI.
    Now u will get list of records for  material number and plant
    Now use fuction module  for planned order Number,
    i think MRP run  create one planned order for all req Plans for  a day.
    Plz tery and comer back & reward and clsoe teh thread.
    regards
    pardeep

  • Requirements plan number

    Hi,
    At what point is the requirements plan number (field PBDNR) populated in SAP. I need to understand when this field first gets populated.
    Thank you

    Hi,
       If you want to give requirement to more than one material ( or a group of materials), through "Requirements Plan number" in the initial screen of MD61, you enter the list of materials.
      In MD62 and MD63, you can view the list of materials collectively by this plan number (PBDNR).
      In real time scenario, the client will use this field as unique to identify the monthly schedule of the respctive month.
       Check this...
    -Thaila Shree

  • Delivery Schedule Number or Delivery Plan Number field

    Hi,
    In MM which field refers to Delivery Schedule number (or Delivery Plan number)
    Advance Thanks
    Aadarsh

    Hi Sanjeev,
    Sorry. That is not the one. ETENR is of NUMC 4. But the field I am seeing is atleat 8 characters (maybe 10).
    I dont have any further information than the name given :
    Delivery Schedule Number or Delivery Plan Number field.
    I can further say to you that this is being used in Vendor Decleration
    Regards
    Aadarsh

  • How to get the Billing plan number for Contract Item?

    HI Friends
    I have been stuck up with the billing plan number to fetch perticular item in sales contract.
    When I go to the table FPLA, I can all the billing plan numbers for a contract or sales order and I am not able to locate for a perticular line item.
    Is there any way to fetch the exact billing plan number for a line item of a contract?
    Please help me
    Thanks
    Praveen

    U need to use the table vbfa or fololow thw link
    [http://www.erpgenie.com/sap-functional/sd/read-sales-document-flow-using-a-function-module]

  • ME2L not picking req.tracking number (Delivery Date)

    Hello,
    We just upgrade our system to ECC-6-EHP7 from ECC6.
    In our Previuos system , in ME2L we can see the req.tracking number(Dely Date).
    But in the new system , the field is there but the value is not picking.
    Do anyone has any ideas...Plz share.
    I have attached screenshots for ur reference.

    This looks very much like an own development, I would certainly not take this to SAP.
    SAP is consistent, if there is a table field identical to a field in the screen then the values are shown 1:1.
    there might be more fields in a screen than in the table, those are then computed during runtime.
    Your case looks like this "tracking number field" is only used as an output field for some other value.
    A programmer should be able to determine at least the program name and then he can check
    if there was a modification in your old system e.g. from SE38 via the program versions
    or he uses this guide to find the potential exits or BAdIs

  • Assignment between network , activity , person , planned number of hours

    Hi
    In CJ20N , we are doing person assignment against activity
    Against activity , in internal tab , we are entering the planned no of hours in the field Work
    Similarly , against each person , we enter the splitted time
    I need to know , in which Table , we can find the relationship between network , activity , person , planned number of hours (at that person level)
    rgds
    sandeep

    Hi Sandeep ,
    AFVC, table for activity
    KBED, table for main capacity.
    KBEZ, for Split
    KPER, person assignment of each period.
    There is a correction report ZKBED_DEL of note 542941, You get more details of the relationships of the tables above, if you view (or debug) the codes.
    Kind regards,
    Zhenbo

  • Link between Contract line and the Billing Plan number

    Hi All,
    I have a requirement which needs a link between the Contract Line item and its Billing Plan Number. I basically have to find out the contracts which have a billing block. So a invoice would not have been created to that line item.
    Please let me know if such a link exists.
    Thanks in advance,
    jr.

    Hello
    In table <b>VBKD </b>(Sales Document: Business Data) you will find the link between the contract (VBELN) and the billing plan (FPLNR). If POSNR = '000000' then this is the billing plan of the contract header.
    The billing block can be found in VBAK-FAKSK.
    Finally, billing plan details can be found in table FPLA. If FPLA-RFPLN is filled then the item billing plan is linked to the header billing plan.
    Regards
      Uwe

  • Issue : PIR Internal Requirement Plan number generation

    Hi,
    I am facing Problem on demand release as a PIR with requirement plan number .
    Requirement Plan number internally generating for each line items one plan number.
    Requirement type : VSF
    Version                : 05
    Example: I want 10 line items in planning table should create internally only one requirement plan number .
    If you know solution help me out.
    Regards,
    Sadasivam R K

    Hi,
    Requirement Plan number internally generating I think it is not possible, as it is to  create and to identify one or more planned independent requirements.
    Only active version of PIR will be considered
    Regards,
    R.Brahmankar

  • Installation/Work center/Plan number combination

    Hi,
    How/Where  to view the work orders for given Installation/Work center/Plan number combination? What is the transaction for this?
    Thanks & Regards,
    Jegashree

    Hi Not sure aout installation, but by work cneter and plant  you can chck report COOIS for production orders.

  • Issue :PIR Demand release with internal requirement Plan number.

    Hi,
    I am facing Problem on demand release as a PIR with requirement plan number  from SCM to SAP R/3.
    when generating the requirement plan
    Requirement Plan number internally generating for each line items one plan number.
    Whenever releasing the demand from APO to R/3 , It should give only one requirement plan number for that batch , Not each line item seperate requirement plan number.
    Requirement type : VSF
    Version                : 05
    Example: I want 10 line items in planning table should create internally only one requirement plan number .
    If anyone know solution help me
    Regards,
    Sadasivam R K

    I hope you must have resolved your query at your end.

Maybe you are looking for