REQ:  Profile for Canon 20-35mm f/3.5-4.5

This is an older lens and I'd really appreciate it if someone is able to create a profile for it.
Thanks,
Mark

Download and install Adobe Lens Profile Downloader 1.0.1.
With  this program you can download a lens profile for 18-35mm f/3.5-4.5 FX format, raw type only and for DX format, raw and jpeg type.

Similar Messages

  • Profile for Canon G10 to simulate Olympus E-3 colors

    I want to create a profile for Canon G10 which will simulate Olympus E-3 colors.
    I performed the following steps, but the result is very disappointing:
    1. Photographed a GretacgMacbeth ColorChecker with a G10 and a E-3, in the same light conditions (Open shade) in RAW.
    2. Converted the RAW files to DNG with DNG Converter 5.4, all default settings.
    3. Opened the E-3 DNG file in Profile Editor. White balanced by right-click on patch #19. Set Base Profile to E-3 Adobe Standard, Color table 6500K, 'Both color tables'.
    4. Set 18 Control Points, one on each color patch, #1 to #18. Wrote down the HSL values for each.
    5. Closed the E-3 file and cleared everything.
    6. Opened the G10 DNG file in Profile Editor. White balanced by right-click on patch #19. Set Base Profile to G10 Camera Standard, Color table 6500K, 'Both color tables'.
    4. Set 18 Control Points, one on each color patch, #1 to #18. Wrote down the HSL values for each.
    7. Noted the numeric difference between the HSL values for each patch in the G10 file, vs the E-3 file.
    8. Corrected the HSL values for each control point, by the numeric difference between the two files.
    9. Saved and exported with a new name.
    Obviously I did something wrong, because the result is BAD!
    I'll appreciate it if someone could help and point me in the right direction.
    Thanks,
    Moshe

    I'd like to add two observations about my above experiment:
    1. If I change the values of a Control Point using the sliders or the point on the color wheel, the preview changes, but much less than the change of the slider. Say, I change the H slider to -10, the change in the preview is only -2, or so. Is that how it should be?
    2. If I hover with the cursor over a color patch in the ColorChecker preview the values change, probably due to noise, and it's difficult to decide which is the correct point. I didn't find an option, like in Photoshop, to set the sampling size so the value is an average of several pixels in all directions.
    Moshe

  • Lens Correction profile for Canon 18-200mm IS

    Hi,
    I'm looking for a profile for Canon lens EF-S 18-200mm f3.5-5.6 IS - I can't find it in Lightroom and at the moment I'm using a profile for similar lenses from Sigma and at first glance it looks ok, but I have to manually find that lens at each photo, which is quite annoying.
    I'm sure there's lots of people using same lens (as it comes included in Canon 50D PRO package which from what I hear is very popular), so maybe someone actually took an effort to create the profile using Adobe's lens profile creator?
    If anyone has got that profile handy, I would very much appreciate if you could send me a link to where I can download it from or simply contact me.
    Thanks cheaps!
    Tom

    You can choose "Save New Lens Profile Defaults" from the Setup popup menu, which will remember your choice of profile for the given {camera,lens} combo. That way you won't have to keep selecting the profile manually in the future.
    Or you can create a preset.

  • Is there a profile for Canon lenses 8-15 mm and Canon 800mm ?

    Can we upload a profile for Canon 8-15 and Canon 800mm lenses?
    If so where is it?

    Ask in the PS/ ACR/ LR forums.
    Mylenium

  • Tokina 16-28 F2.8Lens Profile for Canon 5D Mark II

    Dears,
    I want to  found a Tokina 16-28 F2.8Lens Profile for Canon 5D Mark II.  Look forward to your soonest reply

    Referencing: Victoria Bampton (Lightroom Queen)
    Your Develop Defaults, Lens Defaults and Custom Point Curves are stored at...
    Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \
    Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw /
    I am guessing if you move them to the correct location they will show up.

  • Lens Profile for Canon EF 55-200 4.5-5.6 II USM

    Hello,
    Das anyone have the Lens Profile for Canon EF 55-200 4.5-5.6 II USM ?
    Thanks,
    Mário

    I'm also interested in this.
    Is there anyone out there able to provide one?

  • Tokina 12-24 F4 Lens Profile for Canon 500D

    Dear Adobe Support Specialist,
    I found a Tokina 12-24 lens profile for Canon 450D in this Forums but I am using Canon 500D.  Please kindly advise if it works on 500D too. If not, will there be one soon for download.  Look forward to your soonest reply

    Hi
    I'm not the Adobe support specialist, but I made a lens profile for my Tokina11-16 by using EOS kiss F.
    The profile works well on my EOS kiss X3 too. Thus I guess the prolide you found is also fit your 500D.
    Why not try the profile you found. you can check the profile works well or not.
    kiss F = 1000D, kiss X2 = 450D, and Kiss X3 = 500D.
    Regards
    HiROI

  • Lightroom 6 doesnt have profile for canon g16? Any ideas?

    Lightroom 6 doesnt have profile for canon g16? Any ideas?

    I found the answer to one of my questions.  The ruler for the screen dimension is part of the Profile Maker. These are good instructions.
    http://www.dpmag.com/how-to/tip-of-the-week/make-your-own-custom-lens-profiles-10-11-10.ht ml
    Richard

  • Where can I download ICC profile for Canon paper?

    Hi,
    I bought a new MacBookPro and suddenly the ICC profiles that used to be in my Canon Pixma Pro 10 are missing.  I'm specifically looking for: Canon luster, platinum, museum etching.  Can anyone point me to the right direction please?  Thanks.

    I am having a similar problem.  I had previously printed on my new Canon Pixma Pro 10 to Canon Photo Paper Pro Luster from my MacBook Pro retina running 10.10.3.  I upgraded to Lightroom 6.  Now I do not have the ICC profile for the luster paper available under Color Management in LR6.  I downloaded and reinstalled the print driver but that didn't give me the profile.  All of the ICC profile downloads that I can find are for other vendors' papers.  The link in ssprengel's post takes me to the driver download page but it doesn't give me the Canon paper ICC profiles. Help.

  • Profile for Canon "Pro Premium Matte paper"

    I will receive a package of new Canon “Pro Premium Matte paper” to use with my Pro-100 on Friday. I see that “Print Studio Pro” has a profile for this paper; however, in Lightroom a profile does not exist. Where would I find this profile?
    Nikon D600; Nikkor 50mm f/1.8G, 85mm f/1.8G, 70-300mmG f/4.5 - 5.6 VR
    Solved!
    Go to Solution.

    Nevermind, found it.
    Nikon D600; Nikkor 50mm f/1.8G, 85mm f/1.8G, 70-300mmG f/4.5 - 5.6 VR

  • Lens Profile for Canon 16-35

    Using Canon Mark11 camera and Canon 16-35 lens.  I can not find a profile for it in Lightroom Lens Correction.  Any thoughts on where I can find a profile for this lens?
    Thanks,
    Matthew Kraus

    I also don't see the Canon 16-35 f2.8 II listed in the lens corrections popup list, using the Lightroom 4 Demo downloaded a week ago.  How can get this profile to show up?

  • Lens profile for Sony E 35mm 1.8

    When will the profile for this lens be added to LR? The 35mm F1.8 has been out for a while and it is one of the best and most popular E mount lenses for the NEX cameras. I was hoping to see it in LR5, but unfortunately it's not. I was surprised to see the profiles for the new Carl Zeiss 32mm and 12mm 'Touit' lenses that just came out last month. What does it take for a lens profile to be added? Is there a particular page where we can submit requests or is it just whenever Adobe feels like?
    Thanks.

    Hi,
    Did you try the lens profile downloader? http://www.adobe.com/support/downloads/detail.jsp?ftpID=5492

  • Lens profile for Canon 28/1.8 - already installed in LR4?

    Hmm, the explanation of lens profiles and how to add them is a little confusing.
    When I look here in Adobe's own list of supported lenses, my new "Canon EF 28mm f/2.8 IS USM" is listed there:
    http://helpx.adobe.com/x-productkb/multi/lens-profile-support-lightroom-4.html
    Does that mean that profile should already be installed in LR 4? (I am running 4.4)
    The profile is not showing up in Lightroom for me. (I am shooting JPEG.)
    I downloaded the lens profile downloader, and found a profile for this lens, but is that the official Adobe profile for the lens? I installed it but it still doesn't work for me because it is for RAW only.
    Sorry for the newbie question.
    thanks in advance,
    Paul D.

    JPG lens profiles are distinct from RAW lens profiles because cameras can fix things with the camera-produced JPGs that the lens profiles also fix and you can get double-corrections by using a raw lens profile with a jpg, but it depends on the capabilities and settings of the particular camera.
    If you are sure your camera isn’t correcting geometric and vignetting issues with your JPGs, then you can hack the lens profile you downloaded to use it with JPGs, by editing the .lcp file with a text editor and change the flag indicating it is for raw files from True to False.  I forget what this flag is called, exactly, but it is obvious and near the top of the files.
    On Windows, the lens profiles are downloaded to:
    C:\Users\--username--\AppData\Roaming\Adobe\CameraRaw\LensProfiles\
    AppData is a hidden or system folder so you’ll need to unhide such folders in the folder options in Explorer or just type in the path an hit Enter in the address area of Explorer.

  • Lens Profile for Canon 500mm f/4?

    I seem to remember that there used to be a lens profile for the Canon 500mm f/4 lens in my older versions of Lightroom 3, but now when I use LR3.6, I see "none" listed when looking for a profile for this lens in the Develop module.  Is this a change in 3.6 or am I mistaken?  This probably is not a big deal because I don't remember seeing much change when turning on the profile correction before for this lens, but I am beginning to wonder if I was imagining something.... If the profile was dropped from the latest version, are there any independent profiles for this lens?  Can you remind me how to load a user developed profile?  Thanks.

    Most likely you saw it listed for a CR2 file, and now you're looking for it for JPEG. The raw versions are lots more numerous than the jpeg versions of the profiles.
    Hal

  • Lens profile for Canon PowerShot S120?

    Is there a lens profile for the Canon PowerShot S120?

    Powershsot S100 is available - minor difference in aperture specification but same zoom range - implying that the elements may be the same.  Could serve for your purposes and works well for my S100. 

Maybe you are looking for

  • What are the conditions required to run the F110 without doing EDITproposal

    Hello, masters, am facing the problem while doing F110 for customers, to select more number of invoices i wish to do F110 without selecting the edit proposal. for this am giving payment method and housebank etc., in invoice itself, but am unable to c

  • Generate PDF FORM with editable fields

    Hi, my requirement is to create a document wich has a number of fields which users can fill in. By default, these fields need to be filled in with the data from the database, but editable by the user, the rest of the document has to be non-editable.

  • Customer Master Licenses

    Dear All, Can you please give me more inputs on the table KNVL i.e. Customer Master Licenses 1. Where we maintain these licenses 2. What is the usage of these licenses 3. The routine 32 - License Check checks the licenses. If a license exists, the ta

  • Cannot find the program in Market Place or the web address in my current browser.

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/790159 '' I searched the Market Place for Android and it did not come back with any results - nor did the Firefox.com/m/ show up in my current browser. This is the message I recei

  • Enhancing a portrait. photoshop help

    Im working on a project with a subject in a similar light setting. I saw this project on behance, I'm more so wondering what the process is in step 2? is it a mask with a brush?