Req.Reduction option in CFM1 txn

Dear Gurus,
I am sending the PIR's to APO. Should i also tick Req.Reduction in CFM1? or it's optional
Prasanna

Dear Prasanna,
While transferring the PIRs from R/3 to APO it is not mandatory to select the option of 'Req reduction' in CFM1.
The use of this indicator is to control the selection of product-location cobinations for which the Requirement Reduction should take place.
That is if you do not select this indicator, the requirement reduction would be transferred for all material-location combinations for which an active integration model exists.
If you set this indicator, you can create separate integration models for Requirement Reduction and in the filter criteria specify the materials and locations for which you desire the requirements reduction to be transferred.
Thus it is not mandatory to check the option 'Req. Reduction' for successful transfer of PIRs.
Hope this clarifies your doubt.
Regards,
SCMLearner

Similar Messages

Individual req reduction field in req class ?

Hi Gurus,
can anybody please explain the use of Individual req reduction Field in requirement class, i am not able to understand it even after doing some excercises.
Thanks&Regards,
Venkat.

Dear Prasanna,
While transferring the PIRs from R/3 to APO it is not mandatory to select the option of 'Req reduction' in CFM1.
The use of this indicator is to control the selection of product-location cobinations for which the Requirement Reduction should take place.
That is if you do not select this indicator, the requirement reduction would be transferred for all material-location combinations for which an active integration model exists.
If you set this indicator, you can create separate integration models for Requirement Reduction and in the filter criteria specify the materials and locations for which you desire the requirements reduction to be transferred.
Thus it is not mandatory to check the option 'Req. Reduction' for successful transfer of PIRs.
Hope this clarifies your doubt.
Regards,
SCMLearner

I don't have the Camera Shake Reduction Option in Photoshop CC

I don't have the Camera Shake Reduction Option in Photoshop CC, why is this and how can do I resolve this? I have a CC subscription, I have Photoshop version 13.1.2.x64.
Thanks.

You don't have PS CC, you have CS6. CC (CS7) versions will become avialable in June.
Mylenium

Shake Reduction option

I've downloaded free trial of Photoshop CC but don't have the Shake Reduction option, why?

See below:
You know you can download the english version of photoshop cc if spanish isn't your native language.
(or a variety of other languages as well)

How do you remove the Ambient Noise Reduction option on the built-in microphone in Mountain Lion?

On my old Macbook, I had the option under System Preferences>Input. However, since I've upgraded to a 2012 2.7 i5 iMac, it's no longer there.
The problem lies in the fact that I DON'T want the Ambient Noise Reduction turned on. My recordings in Garageband sound really strange with it. However, it is very obviously being applied to said recordings.
Anyone have any ideas about how to go about solving this?

I'm running OSX 10.8.3 as well. In System Preferences>Sound>Input tab, do you not have the option indicated in the image?

Providing input in one field should activate the req select -options field

in mpool-pgming ,say i have 10 selct options in the selction screen of an application
but first only one input field(one select-option) should be active i.e should be displayed
and all should be inactive(invisible),on providing input inthat the remaining select options
should get displayed,for this how to write code and in which event? is it PBO or PAI?
please provide me the coding ,am in desperate need.

Hi Kudala,
You have to give a loop
loop at screen.
    if screen-group2 eq value1
      screen-active    = 1.
     screen-invisible = 0.
    elseif screen-group2 eq value2.
      screen-active    = 0.
      screen-invisible = 1.
    endif.
    modify screen.
endloop.
where value1 and value2 are the ids you have defined for the text field in the layout editor.
reward points if it helps

MMR Req. /Option field

Hi All,
I want to see in Material Master record, which fields are required/optional/Display.
What is the path or T.Code for this ?
Regards
Asim.

Hi Manish,
thanks for reply.
Can you please tell me how we check in MM03 R/O field .Because all field is coming grey.
In OMS9, diffecult to identify the R/O fileds .
Regards
Sanjay

Missing noise reduction feature in iMac 2012, Do you all know if that feature was available in previous iMacs??

I have been having some issues in my iMac 2012, with the noise reduction feature. I have a MBP retina display that in system preferences has the noise reduction feature. However, in the new iMac 2012, I don't see that feature. Plus, I have been having issues with facetime, people that I call are telling me that they hear feedback whenever I talk to them. Does any of you know if the new iMac is supposed to have the noise reduction feature?

I was trying to find the "use ambient noise reduction" option in my new iMac, but in the new iMac I don't have that option. I was wondering if in previous iMacs versions had the "use ambient noise reduction" option available because I have an issue with facetime, people that I am calling are telling me that they hear feedback or static sound and they can't hear me well. I believe that with the "noise reduction" option, that problem will be solved. However, in my iMac, I don't have that option only in my MacBook pro. The reason that I am asking if in previous iMacs versions had that option is because I believe that there might be a bug that Apple needs to fix in order to have that option available in iMac.

Premiere Elements 4 - shake reduction

In Cyberlink Power Director Express there is a function to magically steady footage (handy when it was shot by my kids on their first outing with a video camera).
I didn't see anything in PE4 but a quick search on this forum brings up a plugin for Pr Pro called "SteadyMove" but then discussions that I can't follow easily about compatibility on various versions.
Given that I have Cyblerlink and am already exporting to DV-AVI from there I can apply its shake reduction before export. But if the plugin is free, and works with PE4, then it might be worth using there instead.
What shake-reduction options are there for PE4?

SteadyMove unfortunately is not free, there was an educational version that was free that you could download and it was also given away with Premiere Pro, infact I downloaded the educational version and used it with Premiere Elements for a while, but I think they removed the link.
PE7 has a stablizier included, similar to the one in Power Director I quess. Your best bet is to export from Power Director as a DV-AVI and then bring this into PE4 for further editing.
If you want a really good stablizier then I can recommend Mercalli... it is very good, unfortunately not free.
http://www.prodad.de/gb/mercalli_std_details.html

Error reading product file driver files

When attempting apply a large merge patch I receive the following error:
Screening out files not valid for this installation...
Determining valid on-site files...
AutoPatch error:
The following file is missing:
/oracle/prodappl/pa/11.5.0/admin/driver/pasb038.drv
AutoPatch error:
Error reading product file driver files [complete; make tapes]
AutoPatch error:
Error determining valid on-site files
Any ideas?
I've tried using options=noprereq option, but that didn't help.

- Try to restore the file from a backup you have Or just copy it from any other environment.
- Make sure that you have included all pre-req patches in the merged file.
I've tried using options=noprereq optionBy this you tell adpatch not to check for pre-req, use 'options=prereq' instead.

How to delete the Transport Request release from SE09

Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
hope u will help me asap
thanks
hardeep

Hi Hardeep,
Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
when u delete a request all the objects saved or locked onto that request are released or unlocked.
So all the objects that were previously locked or saved onto a req are now ready to save into another req.
Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
another option is release the req but do not transport it to target system.
Regards
Ellora

Purchase order mass maintenance

Dear All..
Im using purchase order mass maintenence through MASS T-code with object BUS2012
i want to change field EKPO-MHDRZ it is wrongly maintained as 2 i want to remove this via mass maintainence.
at the time of saving the document its telling no error its telling green colour message as Change Rem.Shelflifetime could not be effected.
message no ME664.
But i want to change.. any possibilities is there.. or any other procedure is there to for PO Mass maintenence...
Regards
Anand.
Edited by: Anandhakumar Palanisamy on Jan 23, 2009 12:34 PM

the field is in purchase order detail on tab delivery
Why you like to remove a value from field you do not even know where it is?
if you dont see the field there, then check IMG > MM > purchasing > Purchase Order > Define Screen Layout at Document Level
select e.g ME21N and go into detail
then go into detail of Delivery monitoring
there you should see the field remaining shelf life and if it is a req. entry , optional entry or display only.
Because you want remove a value, it has to be optional.

Payment Block Field Should be Grayed

_*Scenario:*_
             If one vendor line item is blocked from the MM side, due to there own conditions, that item should not released for payment until & unless the confirmation from the same side and remove the block thru MRBR.
Issue:
             Here, the issue is, even though it is blocked from MM, thru FB02 from FI the user can remove the block indicator and clear the item.
Requirement of the Client:
            As, per the above issue the users (MM) dont want the FI user, having the authority or access to change & remove the block indicator for such line items which have been blocked from MM, and unless they remove the same thru MRBR.
Available Options:
1.     Maintaining the User Authorizations as per the responsibilities. That means providing the FB02 authorization to higher officials only.
2.     In the FB02, Graying out the Payment Block Field.
   So, Can it be possible to Gray out the Payment Block Field in the FB02 transaction..
Please give me the suggestions in this Regard
Thanks
Talluri.

Hi,
You have to change the configuration settings for the co. code in IMG. For that follow the following steps:
Go to IMG->Financial accounting->Account Receivable & Account Payable->Vendor Accounts->Master records->Preparations for creating Vendor Master records->Define Screenlayout per Company Code(Vendors)->Select the Co. Code row->Click Edit Field Status(on top of the screen)->Select Group, Payment transactions->Check the Payment block row field status from Req entry/Optional entry to Display entry.
Hope it answers your question.
Please reward points if you find this to be helpful.
Thanks,
Prithwiraj.

How to set swing to support using vrml/external/browser ?

When doing applets with AWT to call vrml/external/browser.getbrowser, it works. But if update to use swing instead of awt, applets always cannot say: java.lang.NoClassDefFoundError: vrml/external/Browser.
The html file containing this applet is converted by command : java HTMLConverter **.html .And also using java1.3.1plug-in.
But if removing java plug-in and add ---ARCHIVE="Swing.jar"---- into **.html source code without using java HTMLConverter. The applet works.
While, this way can let applet work, but thus, the applet cannot connect to mysql database.
So, anyone knows how to set up swing in applet when using converted **.html with javaplugin? ???
Thanks so much!!!!

Hi David,
Need more info:
Version of Crystal Reports are you using?
Visual Studio version?
Try with this:
The following C# code demonstrates the use of the ExportToStream method:
ReportDocument report = new ReportDocument();
report.Load("c:\\temp\\test.rpt");
ExportOptions options = new ExportOptions();
options.ExportFormatType = ExportFormatType.PortableDocFormat;
options.FormatOptions = new PdfRtfWordFormatOptions();
ExportRequestContext req = new ExportRequestContext();
req.ExportInfo = options;
Stream s = report.FormatEngine.ExportToStream(req);
Response.ClearHeaders();
Response.ClearContent();
Response.ContentType = "application/pdf";
s.Seek(0, SeekOrigin.Begin);
byte[] buffer = new byte[s.Length];
s.Read(buffer, 0, (int)s.Length);
Response.BinaryWrite(buffer);
Response.End();
Regards,
Shweta

Workflow Issue - Enterprise Portal based application not updating Notif.

Hi,
We have designed some workflows based on Adobe Interactive Forms.
We have mapped the APPROVAL STEP to an Enterprise Portal Application(IsrFormApproval) through the SWFVISU txn.
We had a requirement that the Supervisor can change the contents of the Adobe Form during Approval. But when we make these changes to the Adobe form before approval, these changes are not persistent. I mean, when I make changes to the Form, these changes are not getting reflected in further approvals.
Can anyone help me out in these regards.
The notification changes are not getting updated by this IsrFormApproval application.
Regards,
Raja Sekhar

Hi Jocelyn,
Thanks for the reply again.
Yes, I checked my PC has the following ActiveX Controls in place.
1)AcroIEHelper.dll
2)AcroPDF.dll
3)GbDetect.dll
4)Pdfshell.dll
I hope these are the only DLL's that should be there by default.
Is there any specific Configuration to be done to ADOBE DOCUMENT SERVER for this feature to work alone.
Can you let us know where should we mention the TEST OPTION in QISRSCENARIO txn.
Yah,I maintained all the needed parameters as you said.
I cant find any error message in workflow log and flow goes smoothly to the next level supervisor without persisting the changes done by first level supervisor.
So,can you let us know clearly if <b>IsrFormApprove</b> application can really update the NOTIFICATION details at Supervisor Level.
I will check the full cycle if WS50000041 today.
Regards,
Raja Sekhar

Req.Reduction option in CFM1 txn

Similar Messages

Maybe you are looking for