Req small important doc on upgrading SAP

Hi SAP Gurus,
Can any one help me what I should prepare before go for an upgrade of SAP.
Thanks ,
Kris

Refer this link for Smartforms
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d937ec90-0201-0010-0ca8-b6cb3b6dd1ef
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b590fd97-0301-0010-db90-d09ff93cee5a
Subroutine in smartform
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
Style and mailing the Smartform output
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
Table,Template,Loop and Command in Smartform
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
reward if these docs help u.

Similar Messages

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

Error in PHASE PREP_EXTRACT/PREIMP: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP4

Hello,
I'm currently in upgrading a SAP R/3 4.7 system to a SAP ECC 6.0 EHP4.
Therefore I followed the Upgrade Guide from marketplace - installation- and upgrade guides - SAP ERP - SAP ERP 6.0 - SAP Enhancement Package 4 for SAP ERP 6.0 - Upgrade Guide SAP ERP including EHP4 SR1 - Unix on MaxDB.
I downloaded media from marketplace/swdc - Installations and Upgrades - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 / NW7.01 - Upgrade.
I'm starting upgrade with upgrade master DVD 51036889_1 and      51036889_2.
Now upgrade breaks down in phase PREP_EXTRACT/PREIMP with error:
Severe error(s) occured in phase PREP_EXTRACT/PREIMP!
Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
PREIMP.ELG says:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
R3trans preimport and RETURN CODE in R710VPE.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
Kernel is stored in /usr/sap/REX/SYS/exe/run and database is ADA (maxdb).
File R710VPE.REX says:
4 EPU201XBEGIN OF SECTION BEING ANALYZED
4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 07.03.2011 - 15:28:36
4 ETW000 control file: /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 > import
4 ETW000 > file='/usr/sap/REX/upg/abap/bin/R710VPE.SAP'
4 ETW000 > safeandslow=yes
4 ETW000 > buffersync =yes
4 ETW000 > commit     =1048576
4 ETW000 > importtruncated =yes
4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/REX/upg/abap/tmp/R710VPE.REX -u 1 /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 active unconditional modes: 1
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
4 EPU202XEND OF SECTION BEING ANALYZED
Can anybody help me out here?
Regards,
Julia

Hello,
I run 'R3trans -x' command, but there was no problem - connection to database was working.
Problem was following:
Before starting the sdt service on host, I set environment variables JAVA_HOME and LD_LIBRARY_PATH for sidadm. That's not neccessary and that was the problem. Without setting these variables it is working now.
Thanks,
Julia

Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA      700     0015
SAP_BASIS     700     0015
PI_BASIS      2006_1_700     0006
ST-PI     2005_1_700     0006
CRMUIF         600     0003
SAP_BW      700     0017
SAP_AP                700     0012
BBPCRM                600     0002
First I had the following error:
   Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
   GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
     0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
     0 d /   0 i /   0 u /   6 = 100% ucf FUPARAREF
     6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 d /   0 i /   0 u /   1 = 100% ucf TFTIT
     1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
   successfully set a temporary lock on table REPOSRC
   REPOS /SAPCND/LDETERMINATION$14                A replaced.
   REPOS /SAPCND/LDETERMINATIONU14                A replaced.
    [dev trc     ,00000] Wed Nov 26 16:33:14 2008                         1315447 8.171484
    [dbdsoci.    ,00000] *** ERROR => invalid offset 0 for placeholder 16
                                                                                71 8.171555
   unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
   dsql_open returned with unexpected error code 2
   Please contact the SAP support.
   End of Transport (0016).
   date&time: 26.11.2008 - 16:33:14
   5 warnings occured.
   3 errors occured.
   Main import
   End date and time : 20081126163314
   Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
   Summary:
    24 DOCUT imported.
    16 DYNPS imported.
    30 DYNPT imported.
   387 REPOS imported.
    43 REPOT imported.
   Totally 505 Objects imported.
   Totally 3636 tabentries deleted.
   Totally 14 objects activated.
   Totally 12229 tabentries imported.
   62066888 bytes modified in database.
    [dev trc     ,00000] Wed Nov 26 18:14:19 2008                         20996974 40.917838
    [dev trc     ,00000] Disconnecting from ALL connections:                   30 40.917868
    [dev trc     ,00000] Disconnecting from connection 0 ...                  287 40.918155
    [dev trc     ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
                                                                              5759 40.923914
    [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
                                                                                921 40.924835
    [dev trc     ,00000] Now I'm disconnected from ORACLE                    8230 40.933065
    [dev trc     ,00000] Disconnected from connection 0                        90 40.933155
    [dev trc     ,00000] statistics db_con_commit (com_total=527, com_tx=307)
                                                                                59 40.933214
    [dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                52 40.933266
   Disconnected from database.
   End of Transport (0004).
   date&time: 26.11.2008 - 18:14:19
   2 warnings occured.
   Main import
   End date and time : 20081126181419
   Ended with return code: ===> 4 <===
Please advice me.
Regards,
Ahmed

I have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround.

Upgrading sap business one version 800232 is not allowed

Hi All
I got this error when I tried to run an upgrade from SBO 2007A PL 42 to SBO 8.8 PL3.
Any suggestions.
Regards
Bongani

Dear Bongani,
i found something for this Error i hope it help:
Zusammenfassung
Symptom
In the connection setting step or database selection step, the following error dialog appears: "Upgrade SAP Business One from version xxx is not allowed. Contact your SAP business partner for support."
Other terms
Upgrade Wizard, Upgrade Path, Restriction
Reason and Prerequisites
Application error
Due to the nature of development cycles, it takes some time for SAP Business One 8.8 to merge bug fixes from latest released install base patches. As a result, some upgrade paths are restricted in order to avoid data loss/duplicate upgrade in certain cases. For example: a bug fix is applied on 2007 A SP01 PL07 and merged with 8.8 PL05. If the database in 2007 A SP01 PL07 is upgraded to 8.8 PL04, the fix will be lost. In addition, there is a risk of data loss if the fix involves some metadata change. So 2007 A SP01 PL07 can only be merged with version 8.8 PL05 and higher.
Solution
SAP intends to provide a patch or patches in order to solve the problem described.
The section Reference to Related Notes below will list the specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number.
Please note that these references can only be set at patch release date.
SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
In addition to the bug fixes listed in this SAP Note, this patch contains also the bug fixes from:
SAP Business One 2007 A SP01 PL06,
SAP Business One 2007 B SP00 PL14.
For more details, please see the SAP Notes under the "Related Notes" tab.
IMPORTANT: Please note that if you are on a higher patch than the 2007A/2007B patch levels listed above and upgrades to 8.8, this may result in unexpected issues and potential data loss as the upgrade path is not supported yet.
Best regards,
Indira

Import PE51 Form to SAP Script

Hello Experts,
I am Importing PE51 form to SAP Script.The Problem is after Executing the Program RFFOUS_C the PE51 form is coming...into SAP Script But it(PE51 Form) is Compressing?.I don't know why?.But when i executing the Program RPCDTCU0_CE.The PE51 Form is Showing Exactly..without any Compression.
In Searching the Forum i have found these threads..But in these threads i haven't found any Solution
Integration of SAP Script form and HR Form
PE51 - Form Editor
Thanks in advance.

Hey ankur,
Normally you get dashes instead of line because of two reasons:
1. Because the Font Size you are using for the Line is Small hence it cannot print a continous Line..
Please increase the Font Size and try checking in the Layout.
2. Sometimes the SAP printer you have configured does not support the Font Type You have used in Scripts...
Kindly check T-CODE SPAD to see the Device type of the printer you are using supports that font.
Hope this helps you...Have a nice day at work..
Thanx,
Navin....

Additional fields not getting copied from change req to change doc

Hi,
I created some addtional customer fields which I added both in change req and change doc.But the entries given to those fields are not getting copied from change req to the change doc as like standard SAP fields are getting copied.
Please let me know if someone worked on the similar issue.
Regards,
M.R

Hi,
We have done a similar requirement of adding additional fields in Quotation doc type at header and item level .
Also we have got the Reference data of the order being created to flow in to Additional Data B .
This is purely Abaper's Coding .when you add Additional Fields there is screen logic also to be coded for these screens .
to get the Reference order data logic has to be written in PBO of the screen which u have added additional fields .
the reference data will be validated with "VGBEL" field in VBAK table .If VGBEL is not initial then Query the VBAK table for this data in VGBEL into Internal table or work area and update the screen fields in additional data with these fields .
I have done the same and it is Working Wonderful .
Try this and Let me know Further. All the Best.
Thanks,
DevendraP.

How to Import XML file into SAP B1

Dear All,
I have a scenario like,
I am receiving a XML file from a 3rd party application for the daily Creation,Update of Item Master,BP Master, Marketing Documents. I want to import this file into SAP B1 through its approp objects. I understand DTW has limitation in its file types (Semicolo,Tab,Comma,ODBC). How do i do this ? Please guide me.
Thanks,
Thanga Raj K

Hy folks,
I´m frim Brasil and I've been studying the tool EFM (Eletronic File Manager) to learn more about it!
There I saw that we can extract to XML "any" infomation from the database we want, mainly through the GEP.
However, as I've seen, this Add-On can not import any XML file into SBO, unless for the BFP wich can be imported in conjunction with the BTHF Add-on.
So I ask: how is it possible to import XML data into SBO database? Is it possible to be done through the EFM? or it´s really necessary to write a code specifically to do that?
Besides, I know that de B1iSN fit to this necessity... but when I tried to use it, by the custom "object" for BP, for example, there are some data wich the mapping conteined in this custom "process" that can not be imported... I tried to understand how to map those other fields not imported by the custom but this has been dificult to me as I am a implementation consultant focused in administrative process not on development...
Could you please help me with this subject!
Thanks a lot,
Denis

Upgrading SAP ESS and MSS after HR upgrade in ECC 6.0

Hello
I am new to SAP netweaver.
Our landscape has an ECC 6.0 system integrated with EP 7.0.
We recently upgraded our SAP HR from 600(SP 48) to 600(SP61) and EA HR component from 603(SP 22) to 603( SP 35).
After the upgrade we came to know that the portal users are facing some issues with Etime application on portal, i did a bit of searching and found that we have to upgrade SAP ESS, MSS and ERP5COM components. (http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES)
My questions are:
1) Can we directly apply SP's for ESS, MSS and other components as i cannot find any prerequisites required to be met before they have to applied?
2)If we have ESS SP 04 and the required version is ESS SP07, can we directly apply SP 07 or we have to first apply in a sequence SP05, SP06 and then move to SP07?
Thanks a lot!
Varun

Hello,
1) If a developer modified the ESS/MSS package, you need to ask the developer before you apply the patches. In this case, you find the "local version is modified" text in the corresponding package.
2) Java Patches are cumulative, which means that higher Patch contains all corrections of lower Patches.([SAP Note 1249886|https://service.sap.com/sap/support/notes/1249886])
Laszlo

Error while upgrading SAP R/3 Enterprise 4.7 to SAP ECC 5.0

Dear SAP,
We are on the process of upgrading SAP R/3 Enterprise 4.7 with Ext:110 to SAP ECC 5.0.But during the VERSCHK_INI phase an error is been thrown showing that
"The start release configuration :
SAP_ABA :620
SAP_APPL :470
SAP_BASIS :620
SAP_HR:470.....is not supported "
At this stage we decided to continue with this by ignoring the VERSCHK_INI phase,but it gave us a warning that to continue with the next phase(TOOLVERSIOn_INI phase) we require a password.
we searched in several documents even in the documents along with the cd but was not able to find a password for this or a solution for the error in phase VERSCHK_INI.
I request team SAP to help us in this regard.Expecting your reply ASAP.
Thanks and Regards
Anantha Raman E.

Were you able to find a resolution to this problem. We are also having a similar problem in our prepare phase and cannot find anything to help us as yet.
Thanks,
Barry Keating

How do I write a javascript code to open InDesign File, import Doc, save and export to pdf?

How do I write a javascript code to open InDesign File, import Doc, save and export to pdf?

Hi hasvi,
Need Template(.indt), textframes etc for the following script:
var myFolderInd = Folder.selectDialog();
var myFile = myFolderInd.getFiles("*indt");
app.open(myFile)
var myDoc = app.activeDocument;
var myDocName = myDoc.name;
var mySaveFile = app.activeDocument.save(myFolderInd.fsName + "/" + myDocName.split(".indt").join(".indd"));
var myFolderDoc = Folder.selectDialog();
var myFile1 = myFolderDoc.getFiles("*doc");
mySaveFile.pages[0].textFrames[0].place(File(myFile1))
//~ mySaveFile.place(File(myFile1))
app.activeDocument.textPreferences.smartTextReflow = true;
var myPDFFile = new File(mySaveFile.filePath + "/" + mySaveFile.name.split(".indd").join(".pdf"))
myDoc.exportFile(ExportFormat.PDF_TYPE, File("~/Desktop/abc.pdf"));
alert("Process Completed")
Regards
Siraj

Can i upgrade SAP business One version 8.6 to 9.1

Hi Expert,
Can i upgrade SAP business One version 8.6 to 9.1 directly.please assist me.
Regards,
Mizan

Hi,
There is no 8.6 version for SAP B1. Please advice correct version with PL.
Thanks.

Steps to upgrade SAP B1 8.8 PL10 to 8.81 PL05

Hi All,
Please could someone guide me how to upgrade my system from 8.8 PL10 to 8.81 PL05. I have the downloaded file available with me with a "upgrade" application button. Should I directly click on "upgrade" button in the 8.81 PL05 folder and follow accordingly, or we need to uninstall certain elements of existing 8.8 PL10 version?
Thanking you in advance!!!!
Golden

Hi Golden,
For more information regarding upgrade SAP Business One application to version 8.81 please refer to the "Administrator's Guide 8.81 SQL" (chapter: 5 u2013 Upgrading SAP Business One), which can be found on the Documentation Resource Centre on the Portal.
http://service.sap.com/smb/sbo/documentation -> Documentation Resource Center for Release Family 8.8 -> System Administration
Regards,
Ladislav Meszaros
SAP Business One Forum Team

Encounter a problem during upgrade sap r/3 4.7 to ecc6

Hi expert:
i encounter a problem during upgrade sap r/3 4.7 to ecc6
in START_SHDI_FIRST step.
here is the error msg~
MSSCRESPDEFN.LOG
Msg 2812, Level 16, State 62, Server Jack, Line 6
Could not find stored procedure 'dbo.sap_upg_getrelease'.
setuser
i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
can any one tell me how to solve this problem?~
thanks.
Regards
Jack Lee

It's the kernel for the shadow the correct?.
Regards,
Alfredo.

Upgrade Sap R/3 4.6b to ECC 6.0 -unicode enabling

Hi,
I am going to work Upgrade Sap R/3 4.6b to ECC 6.0
My role only Unicode enabling syntax check.
Can any one explain what are the work involved in
Custom Reports, Custom Transaction and Screens, BDC, Enhancements and Exits(BTE), Script ,Custom DDIC
Particularly need information Sapscript forms
Regards,
Ram

Hi Ram,
For Unicode, transaction UCCHECK is your best friend. It will even tell you how to fix the error.
All programs Most of the time you will just go and set the Unicode Checks Active program attribute, save, activate.
- If there are Unicode errors, fix them.
http://iorboaz.blogspot.com/2008/03/sap-abap-solution-instructions-for.html
SAPScript - Not sure if it even needs Unicode-enabling. We are still in the middle of an upgrade. Will add more later.
Custom DDIC In our case, the BASIS team handled the Unicode conversion of the DDIC objects.I think they ran a consistency check first, then run SPUMG or something.
Search the web for a Combined Upgrade and Unicode Conversion Guide.
Hope this helps.

Req small important doc on upgrading SAP

Similar Messages

Maybe you are looking for