Req to send my audio drivers and control panel

hello,my audio drivers and control panel were lost due to the attack of trojans.I'm unable to select my required drivers and control panel,because an error report is occuring and is closing the opened window.so i request you to please send me the suitable audio drivers and control panel.my laptop is presario c555nr model.please send them as soon as posible.
This question was solved.
View Solution.

http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163...
Are any of these yours ??
You may also try to restore your machine to a point before the trojan attack with Microsoft System restore.
Go to start > all programs > accessories > system tool > system restore.
If the trojan corrupted your system to the point where you can't fix it, then you may have to reload your OS using your HP recovery manager. Save all your personal info. before you do this, as it will be deleted.

Similar Messages

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

So are there any other ways to get there, or to change options there?
And is it plausible to use 3d vision (like nvidia its one) but than without an nvidia graphics card. for watching movie's and gaming etc.
Thank you!

Having both PC Settings and Control Panel is unnecessary redundancy.

Hi!
I keep getting into the Windows 8 type of PC Settings. And honestly, the PC settings is really lacking highly in substance. It is also very confusing to have both PC settings and control panel. Why not only use the control panel? It is waaaaaaay way more
polished than the PC settings.
I feel like this is a bad decision.

Agreed. It's completely redundant and should be consolidated to one view. Preferably the control panel view. Dont try and fix what isn't broken.

*FIXED* No sound and 'No Audio Device' in Control Panel. *FIX

I?m having a problem with my sound. Basically all I get is a system sound, which means no sounds from itunes but the error prompt sounds still play. I?m tempted to say that this is a detection issue because of several things:
-First, when looking in the ?sounds and audio devices? in the control panel I get grayed out selections and a ?no audio device?.
-Secondly, when running the directX diagnostic tool (typing ?dxdiag? in the ?run? window) I get several troubling indications. First under device I have no manufacturer or product ID. Second under drivers I have (copied from dxdiag text file):
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8//2006 4:45:38, 499584 bytes
Other Files:
Seems hunky-doorey but then I have a note at the bottom that reads:
Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
I have seen another similar post that seemed to have the same problem, but they didn?t provide much information and the fix was to pull out the audio card, run start up, turn it off, and then put it back in and run start up. If this is what needs to be done, could I have a picture or something of what the sound card looks like?
This problem started when I tried to update my sound card and since then my sound has been? possessed? or prone to working at sometimes and then (most of the time)failing at others.
Here is the dxdiag.txt file without the lengthy directShow filters and directx components:
System Information
Time of this report: 5/9/2007, 2:8:45
Machine name: GURU7892COMPUTE
Operating System: Windows XP Home Edition (5., Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension XPS
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz (2 CPUs)
Memory: 022MB RAM
Page File: 436MB used, 2026MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.280 32bit Unicode
DxDiag Previously: Crashed in system information (stage 3)
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab : No problems found.
Sound Tab : DirectSound test results: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON 9800 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9800 PRO AGP (0x4E48)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_002&DEV_4E48&SUBSYS_3002002&REV_00
Display Memory: 28.0 MB
Current Mode: 52 x 864 (32 bit) (75Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 600,200
Driver Name: ati2dvag.dll
Driver Version: 6.4.000.6660 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 2/6/2006 9:50:46, 26368 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 2/6/2006 9:50:29, 98464 bytes
Device Identifier: {D7B7EE2-0D08-CF-B669-080AC2CB35}
Vendor ID: 0x002
Device ID: 0x4E48
SubSys ID: 0x3002002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C-6FB7-44F5-908-056BF2EE449D}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{552C0DAD-CCBC-420B-83C8-74943CF9FA6}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
{335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: SB Audigy 2 Audio [CF00]
Default Sound Playback: Yes
Default Voice Playback: No
Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_00302&REV_04
Manufacturer ID:
Product ID:
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8//2006 4:45:38, 499584 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Standard
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 92000
Static/Strm HW Mix Bufs: 64, 62
Static/Strm HW 3D Bufs: 64, 62
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
Sound Capture Devices
Description: SB Audigy 2 Audio [CF00]
Default Sound Capture: No
Default Voice Capture: No
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
Date and Size: 8//2006 4:45:38, 499584 bytes
Cap Flags: 0x4
Format Flags: 0xFFF
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: .00.006.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
SB Audigy 2 DirectMusic Synthesizer [CF00], Hardware (Kernel Mode), Output, DLS, Internal
SB Audigy 2 Audio [CF00], Software (Kernel Mode), Output, DLS, Internal
Registry: OK
Test Result: All tests were successful.
DirectInput Devices
Device Name: Mouse
Attached:
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached:
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x24D7
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:42, 57600 bytes
| Driver: usbd.sys, 8/29/2002 03:00:00, 4736 bytes
Gameport Devices
PS/2 Devices
+ Logitech PS/2 Keyboard
| Matching Device ID: *pnp0303
| Upper Filters: L8042Kbd
| Service: i8042prt
| Driver: i8042prt.sys, 8/3/2004 23:4:36, 52736 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
| Driver: L8042Kbd.sys, 2/0/2004 2:47:58, 3056 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
| Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
|
+ HID-compliant MX58 Optical Mouse
| Vendor/Product ID: 0x046D, 0xC0E
| Matching Device ID: hid\vid_046d&pid_c0e
| Upper Filters: LMouKE
| Lower Filters: LHidKE
| Service: mouhid
| Driver: mouhid.sys, 8/7/200 3:48:00, 260 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
| Driver: LHidKE.Sys, 2/0/2004 2:48:46, 24704 bytes
| Driver: LMouKE.Sys, 2/0/2004 2:48:40, 68992 bytes
| Driver: KHALMNPR.Exe, 2/0/2004 2:45:26, 4952 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: Not run
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM
DirectPlay8 Serial Service Provider: COM2
DirectPlay8 TCP/IP Service Provider: Wireless Network Connection - IPv4 -
DirectPlay Voice Codecs
Voxware VR2 .4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.0 3 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Age of Empires II (DX7) - Registry: OK, ExeFile: Empires2. ICD (0.4.0022.072)
Age of Empires II - The Conquerors Expansion (DX7) - Registry: OK, ExeFile: \age2_x.icd (0.07.0025.064)
Dungeon Siege 2 (DX7) - Registry: OK, ExeFile: DS2.icd ()
Dungeon Siege II Demo (DX7) - Registry: OK, ExeFile: DS2.icd ()
MechWarrior Black Knight (DX7) - Registry: OK, ExeFile: MW4x.exe (45.05.000.070)
MechWarrior Vengeance (DX7) - Registry: OK, ExeFile: MW4. ICD (.30.0004.908)
Star Wars JK II Jedi Outcast (DX7) - Registry: OK, ExeFile: jk2mp.exe ()
WDM Streaming Data Transforms:
Microsoft Kernel Acoustic Echo Canceller,0x00000000,0,0,,
Microsoft Kernel GS Wavetable Synthesizer,0x00200000,,,,5.03.2600.280
Microsoft Kernel DLS Synthesizer,0x00200000,,,,5.03.2600.280
Microsoft Kernel DRM Audio Descrambler,0x00200000,,,,5.03.2600.280
Video Compressors:
WMVideo Encoder DMO,0x00600800,,,,
WMVideo8 Encoder DMO,0x00600800,,,,
MSScreen encoder DMO,0x00600800,,,,
WMVideo8 Encoder DMO,0x00600800,,,,
WMVideo9 Encoder DMO,0x00600800,,,,
MSScreen 9 encoder DMO,0x00600800,,,,
DV Video Encoder,0x00200000,0,0,qdv.dll,6.05.2600.280
Indeo? video 5.0 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
Indeo? Video 5.2 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.05.2600.274 9
3ivx D4 4.0.4,0x00200000,,,qcap.dll,6.05.2600.280
Cinepak Codec by Radius,0x00200000,,,qcap.dll,6.05.2600.280
DivX ;-) MPEG-4 Low-Motion,0x00200000,,,qcap.dll,6.05.2600.280
DivX ;-) MPEG-4 Fast-Motion,0x00200000,,,qcap.dll,6.05.2600.280
DivX? 6.. Codec (2 Logical CPUs),0x00200000,,,qcap.dll,6.05.2600.280
Intel 4:2:0 Video V2.50,0x00200000,,,qcap.dll,6.05.2600.280
Intel Indeo(R) Video R3.2,0x00200000,,,qcap.dll,6.05.2600.280
Intel Indeo? Video 4.5,0x00200000,,,qcap.dll,6.05.2600.280
Ligos Indeo? XP Video 5.2,0x00200000,,,qcap.dll,6.05.2600.280
Intel IYUV codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft H.26 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft H.263 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V2,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V3,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft MPEG-4 Video Codec V,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft RLE,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft Video ,0x00200000,,,qcap.dll,6.05.2600.280
Microsoft Windows Media Video 9,0x00200000,,,qcap.dll,6.05.2600.280
XviD MPEG-4 Codec,0x00200000,,,qcap.dll,6.05.2600.280
DivX? 6.. YV2 Decoder,0x00200000,,,qcap.dll,6.05.2600.280
Audio Compressors:
WMA Voice Encoder DMO,0x00600800,,,,
WM Speech Encoder DMO,0x00600800,,,,
WMAudio Encoder DMO,0x00600800,,,,
Indeo? Audio Software,0x00500000,,,iac25_32.ax,2.00.0005.0054
Vorbis Encoder,0x00200000,,,OggDs.dll,0.09.0009.0005
IAC2,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie CELP 4.8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 2kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
Lernout & Hauspie SBC 6kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
IMA ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
PCM,0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode2),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode3),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode+),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode2+),0x00200000,,,quartz.dll,6.05.2600.2749
Ogg Vorbis (mode3+),0x00200000,,,quartz.dll,6.05.2600.2749
Microsoft ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
ACELP.net,0x00200000,,,quartz.dll,6.05.2600.2749
DSP Group TrueSpeech(TM),0x00200000,,,quartz.dll,6.05.2600.2 749
Windows Media Audio V,0x00200000,,,quartz.dll,6.05.2600.2749
Windows Media Audio V2,0x00200000,,,quartz.dll,6.05.2600.2749
GSM 6.0,0x00200000,,,quartz.dll,6.05.2600.2749
Messenger Audio Codec,0x00200000,,,quartz.dll,6.05.2600.2749
Microsoft G.723.,0x00200000,,,quartz.dll,6.05.2600.2749
CCITT A-Law,0x00200000,,,quartz.dll,6.05.2600.2749
CCITT u-Law,0x00200000,,,quartz.dll,6.05.2600.2749
MPEG Layer-3,0x00200000,,,quartz.dll,6.05.2600.2749
Midi Renderers:
Default MidiOut Device,0x00800000,,0,quartz.dll,6.05.2600.2749
WDM Streaming Capture Devices:
SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
WDM Streaming Rendering Devices:
SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth A [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
Microsoft DVBC Network Provider,0x00200000,0,,msdvbnp.ax,
Microsoft DVBS Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
Microsoft DVBT Network Provider,0x00200000,0,,msdvbnp.ax,
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,,0,psisrndr.ax,6.05.2600.280
MPEG-2 Sections and Tables,0x00600000,,0,mpeg2data.ax,
WDM Streaming Mixer Devices:
Microsoft Kernel Wave Audio Mixer,0x00000000,0,0,,
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,,0,encdec.dll,6.05.2600.280
Encrypt/Tag,0x00200000,0,0,encdec.dll,6.05.2600.280
XDS Codec,0x00200000,0,0,encdec.dll,6.05.2600.280
Audio Renderers:
CyberLink Audio Renderer for Dell,0x00200000,,0,cladr.ax,3.05.0000.2409
Default DirectSound Device,0x00800000,,0,quartz.dll,6.05.2600.2749
Default WaveOut Device,0x00200000,,0,quartz.dll,6.05.2600.2749
DirectSound: SB Audigy 2 Audio [CF00],0x00200000,,0,quartz.dll,6.05.2600.2749
WDM Streaming System Devices:
SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Synth A [CF00],0x00200000,0,2,,5.03.2600.280
SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
SB Audigy 2 Audio [CF00],0x00200000,2,2,,5.03.2600.280Message Edited by guru7892 on 05-20-20072:43 PM
Message Edited by guru7892 on 05-24-200705:55 PM

I found that once you reinstall your sound card you need to make sure you hook everything back up correctly.
basically all you need to do is run a start up with your sound card out ofyou computer and then re-run start up with the card back in.

Add audio files and control play in pdf

Hi, newbie here. I have a set of large text documents in Word and corresponding mp3 audio files. I am trying to create pdf's with the audio files embedded at specific points in the text. I can put audio in and play it, but there is no controls for the audio. I have seen a pdf file with a play-pause-stopbar that works, but cannot figure out how to do it. Any and all help is greatly appreciated. Using Acrobat Pro7 (can upgrade if needed). Thanks
Just another thought, is there a small flash player that can be mbedded into a pdf?

Thanks. I have upgraded and used the new conversion to Flash for the mp3 and
it works well. The look of the player isn't the greatest but it suits my
needs. Thanks again.

UAC And Control Panel information

Publishing from InMarket to Intel's AppUp is definiately causing quite a few problems. Attached are images of UAC when installing and uninstalling our app from AppUp - it incorrectly identifies the publisher. When installed, it doesn't report a version in the control panel. It also doesn't allow Adobe's browserapi SWF to launch the app - all of these things are creating a load of issues for us when it comes to our end users.
We just got off a call with Intel talking about the browserapi problem and another issue we're experiecing where a user has AIR 2.0 installed but our app requires 2.5 and AppUp doesn't prompt to upgrade so it fails and we get a bad rating from that user. They say they don't even officially support AIR 2.5 in AppUp. This is crazy

Damon,
can you, by any chance get the real icon files from the installed apps as they are used on the desktop and send them in an email to me.
This is hard to compare because one appears to be from a netbook running Windows (Vista?) then the other screen shot appears to be from an OSX installation or a desktop version.
Are you sure it is not the OS and the desktop shell that picks the icons and renders it?
The text on the top one is wrapped so the way shortcuts are pictured appears to have some space contraints.
Have you tried to change the way desktop icons are displayed?
Right-click the desktop, point to View, and then click Large Icons, Medium Icons, or Classic Icons. (Classic icons are the smallest size.)
When you have selected Classsic only the very small icon files are used
Let me know if that works
Joerg

Notifications and control panel do not work on either the app screen or home screen

On my home screen and in apps, I can not swipe up or down to release the notifications or control panel. It has worked earlier today, however not any more.
I can, however, access them in the lock screen, andin settings, they are allows to open in apps. It should always allow me to access them in the home screen though, so I do not know what has happened.
What do I have to do to access the control panel in the home screen, and why is it like this?

Do you have a screen protector or case that would interfere with swiping?
If so remove them as a test.
Otherwise:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

What is the differences between PC Settings and Control Panel in Windows 8 and later

Background:
      I made a windows driver. I need to let the settings of it can be searched in 2 places:
               1.Search box of the Control Panel page
               2.Search box[Settings] when press the [Win] + W Keys.
      Now the 1st place has been supported, but did not find out the method for 2nd place.
      About Windows Search I just find out the search guide for file systems, does anyone know how to support the 2nd Search box[Settings].

What region are you in? I heard that there are no separate student and education versions anymore.
If it actually says "Education edition" somewhere then I'm guessing 1 of 2 things:
1. "Education Edition" is just another name or title for "Student + Teacher Edition"
or
2. The "Education Edition" is the volume licence equivalent of the Student + Teacher Edition (which is a single licence for personal use on one computer only).
Don't take my word for it though. I'm new to all of this (looking to buy my first Adobe software products)
I'm in Australia and I can only buy Student + Teacher Edition (no Education Edition).
Did you receive a physical CD copy of the suite?

Palettes, toolbar, and control panel don't work in CS3?

I can't select pages from the "Pages Palette" or add or delete pages from the same palette. All of the palettes are having similar issues (i.e. Pages, Info, Layers, Links, Stroke, Swatches, Object Styles, Color, Effects, Gradient, Character Character Styles, Paragraph, Paragraph Styles, etc.) They are just unusable. Most of the toolbar work except for the selection tool which I can only activate by pressing (V). The control panel seems to be having the same issue. I've tried reinstalling and repairing the install on the entire CS3 package. I've tried reinstalling and repairing the install on just InDesign. Photoshop CS3, Acrobat, and Illustrator work fine....not sure about Dreamweaver, Flash, and the others.I've downloaded and installed all available updates for CS3 from Adobe's site.
Any thoughts?
Running on:
Windows Vista Home Premium 32-bit
Service Pack 2
Processor: Intel(R) Core(TM)2 CPU T7200 @ 2.00Hz
2.00 GB RAM

See InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

Rogue Processes and Control Panel

I have rogue processes implemented but I need the users to be able to
access a couple things in the control panel. They click on the Display
icon in the control panel and it of course give them the rogue error
for rundll32.exe. I've added rundll32.exe to the exception list, but
it still does not work. Any ideas?
jv
johnnyv5

johnnyv5,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Use FMS & Actionscript to Stream Audio/Video and control (powerpoint) slides

Hi there,
My compnay provides webcasting services to numerous clients, and we currently use Windows Media Encoder as our base software for these projects.
However, I'm interested in switching to Flash Media Server, but need to figure out one issue and how to implement it in such a way like how we are currently using Windows Media Encoder.
We need a way to stream out a live audio/video feed AND have a way to control a presenter's POWERPOINT slides and have them advance by our command when streaming live.
Basically, the way we do it is we will stream out audio/video from WME and also use the encoder's SCRIPTING functions to send out a "url" from the encoder to the actual page in which the viewer is watching the live embedded stream. On that page is an embeded/internal frame which we can specify (using the id/name) that the url gets loaded, and this actually advances the slides (or more so pulls up a pre-created html page of the next slide in the person's powerpoint, which is actually a screenshot or exported image of that slide and embedded within a specific HTML file and hosted on the same server as the embedded player/html file)
Would there be a way to send out this same type of script using FMS? I've been playing around with it and notice the interface itself does not have a built in scripting function like Windows Media Encoder does. However, I did read somewhere that it supports ActionScript... but I have no clue how to implement this feature.
I am just curious how it might be able to go about doing this? Is there a way to use an [action]script with FMS and have it send out a URL to a specific frameset embedded on the same page as the Flash Media Encoder Playback?
Hopefully this make sense and that someone can point me in the right direction. Switching to FMS over Windows Media Encoder is the way I would love to go, just need to figure out how this could be done.
Would a better method be converting the powerpoint slides to a swf or flv file, embedding that file within the same page as the FMS playback, and somehow using a script to "advance" the frames/slides/scenes within that file?
I also heard something about Flash "Shared Objects" and how this could be a way of controlling a swf file remotely.....
Could anyone give me some advice and know a method that I could use to achieve this type of implementation?
Any help is GREATLY appreciated! Thanks!

FMS (the interactive version, FMIS) has complete scripting support.
What you want to do can be done with FMS, and there are a lot of ways you can approach it. Converting to .swf can be helpful, as it means you have a single resource to load rather than a bunch of individual slide images (the flashplayer can load .swf, jpg, gif, png). Rather than embedding, I'd opt to make it an external resource and load it at runtime... that would keep the player application reusable.
To get an idea of how to use server side actionscript, see the getting started portion of the FMS 3.5 dev docs
http://help.adobe.com/en_US/FlashMediaServer/3.5_Deving/
Then, see the SSAS docs for the following classes in particular:
The Client class for Client.call()
The Stream class for Stream.send()
The Shared object class
The Application class for BroadcastMsg()
The docs give some general overview for the usage of each. The best choice really depends on your deployment architecture and scalability requirements.

M-audio drivers and Mavericks

I use an old M-audio Firewire 410 audio interface. The drivers, which have not been supported since OSX 7, worked fine with Mountain Lion, but will they be okay with Mavericks?

I have the same interface as you do .. looking thru Apple doc , it seems that CoreAudio and CoreMIdi are unchanged so it looks good but then I found this :
Important: The code signing technique used for kernel extensions changed in OS X v10.8.3. Kernel extensions signed with earlier versions of OS X are treated as unsigned by OS X v10.9.
Kernel extensions signed using the newer signing tools are incompatible with OS X v10.7.5 and earlier. If you are producing a kernel extension that must support versions of the operating system prior to version 10.8, you must install an unsigned copy in/System/Library/Extensions, in addition to any signed copy in /Library/Extensions. Versions of OS X prior to version 10.9 will ignore the unsigned copy in /Library/Extensions. If the user upgrades to OS X v10.9 or later, the user’s system will prefer the signed copy in /Library/Extensions.
I will do some more research..

My Starter has (1GB usable) despite 4GB acknowledged by BIOS and Control Panel

I have a 110-4250NR with Windows 7 Starter. My new RAM is Crucial, meeting all the specs. To me, the hardware and software both recognize the 4GB, but Windows will only use 1GB. Am I missing something here? In other machines, Windows would use the maximum amount per OS, even when excess capacity is installed. HP support was not helpfull.
FRIW, I may upgrade to Premium, which addresses the 4 GQ,
Thanks

Hi,
Windows 7 recognizes memory upto 2 GB only. I'd recommenfor a windows upgrade.
Good luck!
Hit kudos if I helped.

Bootcamp drivers installed but do not load control panel in XP

I have a 13' Aluminum Macbook (5,1) w/ 2GB ram and 160GB HD. I recently install Windows XP in Bootcamp on a 32GB partition converted to NTFS during install. Once installed I installed the bootcamp drivers from my Leopard DVD that came with the laptop. After the restart the bootcamp drivers and control panel loaded fine. After that, I updated XP (SP3 was included on the CD) to get the current security updates and IE7, etc. I proceeded to install Google Chrome. After my next restart, excluding the two required during windows updates, the control panel and bluetooth control panel do not load. Everything else still works and my mouse still identifies with bluetooth. However I do not have any control over trackpad settings and everything else the bootcamp panel allows you to do. As well my wireless card will not connect to my Airport Express with WPA2.
The wierd thing for me is this is not my first XP install. I did it once before and had no issues whatsoever. I did everything in the same sequence with the same XP CD and key. The only difference is that before the partition was considerably smaller (10GB).
Any ideas?

My Program (in Vista) is \Program Files\BootCamp\KbdMgr.exe product version 2.1
Press Start icon on left side of task bar,select Run typing msconfig
brings up system configuration
a) under Start Up tab, what you need, Boot Camp etc. should be checked
b) under Services tab, Apple, BTH items should be checked and running. If checked and not running, right click My Computer->Manage->Services and Applications->Services. Here you can right click Apple,BTH services to set properties Auto & Start

Bootcamp Control Panel Gone (Windows 7 System Tray)

After I installed Windows 7 64-bit using bootcamp, I had a system tray icon for the Bootcamp Control Panel. It recently disappeared and I can't get it to appear back. Without the control panel running properly, it looks like the volume keys, backlit keyboard, etc don't work anymore in Windows.
I have tried the things I could find in these forums and through online searches but nothing has worked:
1) Uninstall and then reinstall Bootcamp drivers and controll panel program using the OSX install DVD. I installed "Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 64 bit)"
2) Using msconfig to confirm Bootcamp was in the start up program list (it was already in the list so I unchecked it, rebooted, then checked it again, an rebooted)
3) Running Bootcamp.exe in Windows Vista compatibility mode
4) Checking my registry for the entry being there correctly (it was)
5) Customising the "notification area icons" to make bootcamp have the "Show icon and notifications" behavior.
None of these things worked. For additional information, I see that Bootcamp.exe is in the Windows task manager process list so it seems to be running.
How anyone found a solution to get the control panel system tray working again?
Thank you!

Hi Flying High,
Thanks for the response. The little gray square for the Boot Camp Manager has shown up in the notification area before (accessible through the little arrow on the right side of the screen), but the problem is that it doesn't show up anymore.
I just tried uninstalling Boot Camp and all the drivers, and then reinstalling it again from the DVD and using the "Boot Camp Update for MacBook Pro (13-inch Mid 2010 (Windows 64 bit)"...
The little gray square for the Boot Camp Manager showed up after the first reboot and the function keys worked (like volume control), but when I rebooted again, the notification manager didn't show up and none of the function keys work anymore. So back to square one.
Has anyone had this problem with the Boot Camp Manager showing up in the notification ares only after the initial installation but not after reboots?
Thank you!

Req to send my audio drivers and control panel

Similar Messages

Maybe you are looking for