Reqd customized report to display opening balance in fbl3n
HI experts ,
As u know in FBL3N we wont get the closing balance of till previous day as the opening balance of present day.
we can get the closing balances by giving periods .BUT actually accounts people's in our company need is ,Display of opening balance at the top of the page while doing the today transactions .
Actually I suggested them FBCJ (cash journal) is the good one to use but they are saying that they can't use this transaction in between the economical year behalf of FBL3N , they are saying that they will face numbering range problems.
SO CAN ANY ONE HELP ME
advance thnks
Moderator message - Welcome to SCN.
but
Moderator message - Please do not cross post- thread locked
Rob
Similar Messages
-
How to display Opening Balance/Closing Balance in Genral Ledger PLD
Hi all,
How to display Opening Balance
in General Ledger
PLD
(OB is already displayed in
header of print report)
on first page only?
How to display Closing Balance
in General Ledger
PLD
(CB is already displayed in
footer of print report)
on Last page only?
Thanks,
With regards,
Jeyakanthan.Hi,
If you open General Ledger Report and after selecting customer code you will see the Print Preview. On that time, one window opens and asks you to select any one from two options.
Option 1 : Book of Accounts
Option 2 : Subsidiary Account
In both the Options, PLD has Opening Balance in Repetitive Area Header and Closing Balance in Repetitive Area Footer. So, it will when Report grows more than one page and if you want to see both the Opening Balance and Closing Balance in all the pages then you should Tick the Check Box "Display Repetitive Area Footer on all Pages" . So that you can view OB and CB in all the pages.
Raja.S -
VENDOR/GL/CUSTOMER ACCOUNT STATEMENT WITH OPENING BALANCE
Can anybody tell me the tcodes in SAP for Vendor/Gl/Customer Account Statement with opening balance.
Best Regards,
Sudhanshu Dang
0124-3081015hii
As per my knowledge no such reports for GL are there in sap.. we also had a same requirement but could not find it... we wanted reports with opening and closing balalnces...
u can go to SAP1 and check all the standard reports available. check wheather any report fulfills ur need or else go for abap reports...
Check f.42 T code for Vendor Report. and s_alr_87012172..for customer.
thanks
sejal -
Report for displaying open POs
Hi frds
i wants to display the open POs line item and its quantity .anyone give me the logic for this report.
thanks
Pari Vendhan.RHI frd
thanks for information ..while puting your logic in report program its not displaying open POs.
with this msg i hv attached my codings ..pls correct my mistake.
REPORT Z_CONSUMABLE_ROL.
Data : Mat_no like mara-matnr, "Material Number
Plant1 like ekpo-werks, "Plant
com_co like mseg-bukrs, "Company Code
store like mseg-lgort, "Storage
SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK 01.
SELECTION-SCREEN: BEGIN OF BLOCK 02 WITH FRAME TITLE text-001.
SELECT-OPTIONS MATERIAL FOR mat_no.
SELECT-OPTIONS Plant FOR plant1.
SELECT-OPTIONS COMPANY FOR COM_CO.
SELECT-OPTIONS STROAGE FOR STORE.
SELECTION-SCREEN: END OF BLOCK 02.
SELECTION-SCREEN: END OF BLOCK 01.
DATA DECLARETION FOR INTERNAL TABLE.
Data : begin of itab occurs 0,
matnr like mara-matnr, "Material Number
maktx like makt-maktx, "Material Desc
meins like mara-meins, "UOM
minbe like marc-minbe, "ROL
lgnum like mseg-lgnum, "Warehouse
ebeln like ekKo-ebeln, "PO Number
menge like ekpo-menge, "PO Qty
banfn like eban-banfn, "PR Number
meng1 like eban-menge, "PR Qty
mblnr like mseg-mblnr, "PO Number
ELIKZ like EKPO-ELIKZ,
end of itab.
SELECT STATEMENT.
select a~menge
a~werks
a~ELIKZ
b~banfn
b~menge
c~matnr
c~meins
d~maktx
e~minbe
f~lgnum
f~mblnr
f~bukrs
f~lgort
h~ebeln
INTO CORRESPONDING FIELDS OF TABLE ITAB FROM EKPO as a
inner join EBAN as b on aBANFN = bBANFN
inner join MARA as c on cMATNR = aMATNR
inner join MAKT as d on dMATNR = cMATNR
inner join MARC as e on eMATNR = cMATNR
inner join MSEG as f on fMATNR = cMATNR
inner join EKKO as h on hEBELN = aEBELN
where cmatnr in MATERIAL and awerks in PLANT and f~bukrs in
COMPANY and f~lgort in STROAGE.
write :/ 'Material_No' color 4,
20 'Material_Desc' color 4,
55 'UOM' color 4,
65 'ROL' color 4,
75 'Warehouse' color 4,
87 'Open Po' color 4,
115 'PO Qty' color 4,
125 'PR No.' color 4,
145 'PR Qty' color 4.
write : sy-uline.
if itab-ELIKZ = 'X'.
loop at itab.
write : / itab-matnr,
20 itab-maktx,
55 itab-meins,
65 itab-minbe,
75 itab-lgnum,
87 itab-ebeln,
105 itab-menge,
125 itab-banfn,
135 itab-menge.
endloop.
endif. -
Report to display open purchase order by vendors
Hi all,
Please let me know the report that displays the open purchase orders by vendors
Thanks in advance
sunilDear Sunil,
Added to erlier reply, you can get by ME2L/ME2M...., inselection parameters select WE101. Which gives all the POS that are open. You can restrict y giving the vendor number.
If your proble is resolved, please close the issue
With Regards,
krishna -
Is there a report to display tha balances of a G/L account day by day?
Hi All,
I'm looking for a report to to display tha balances of a G/L account day by day (the cumulative balances too)
T.code FS10N shows me the balances of a G/L account period by period, but not day by day.
Could anyone help me?
Thanks
GandalfHi Jeyakanthan ,
I've checked it, but the balances aren't available in that report.
Gandalf -
Hi Experts,
When I am generating System trial balance report, it shows null in opening balance column for some of accounts while ledger for respective accounts are showing correct figure of opening balance.
And because of this my trial balance showing wrong figures
Also, I have checked it through query report, it showing same opening balance figure as ledger report.
(Attachment for trial Bal, Ledger & Query reports for one of the account are attached here)
I have checked all selection criteria in Trial balance report, but nothing is working.
Please suggest me any solution for for above issue.
regards,
RavirajHi Raviraj
Can you confirm In Trail Balance Opening balance for the Period is OB Starts from Company Activity.
With Regards
Balaji Sampath -
Hello Friends,
I want to see only closing balance of last year transactions and transaction figures of this year if i run report for this year.
e.g.GL.NO.11000010 has balance in the year 2009 and 2010. if i execute the report for 2010, report should display balance for last year transactions and line item transactions for this year.
Anyone please help on this.
is it possible through layout changes or any additional configurations needed.
Rgds
SwapnaHi,
You will need to do a deelopment.
You can use the following BAPIs for extracting the balaces.
BAPI_GL_GETGLACCBALANCE Closing balance of G/L account for chosen year
BAPI_GL_GETGLACCCURRENTBALANCE Closing balance of G/L account for current year
BAPI_GL_GETGLACCPERIODBALANCES Posting period balances for each G/L account
Regards,
Amit -
GR/IR account showing open balance in FBL3N
Hi All,
There are no open GRN for booking still there is difference of amount in FBL3N.
what could be the reason for showing open line item in fbl3n?
Thanks
chinnaHi Atif,
Thanks for your detailed analysis& for your help in these days
Please find below example:
The PO quantity 250*155 -usd=38750 USD
GRN-38750.00 -usd
MIRO-1,738,529.42 -INR
The GRN and MIRO and condition types all are booked 250 quantity, there is no pending to book however the GR/IR account t.code FBL3N is showing open balances.
As your said F.13 is pending?
Thanks
Chinna -
How can a SAP or custom report be displayed on a VC dashboard?
We have NetWeaver Portal set up and also have Visual Composer 7.0. We do NOT have BI or BW. We are trying to set up and test a dashboard for our upper management. We have the backend SAP system connected and have access to the standard SAP BAPIs.
Is it possible to display the results of a standard SAP report ( for instance transaction S_ALR_87013611 or results from transaction CN40 ) or must custom BAPIs be written to capture the report results?Hello MPersson,
You can only exchange data between VC and R/3 or ECC through Remote Function Calls.
So, if you want to display the data from a report or transaction one of the ways you can use is to write an RFC with a 'call transaction'.
You can also write an RFC which selects all the fields you want to import in VC.
Regards,
Alessandro. -
GL Custom Reports not displaying source and line item Data after Upgrade
Hi,
I am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
None of the GL reports is showing the Source and Line Item details.
Thanks,
ArunI am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
None of the GL reports is showing the Source and Line Item details.Have you verified the queries of those reports after the upgrade? And, when you say upgrade, do you mean from 11i to R12?
Did you set the application context properly?
How to set the Organization Context in R12? [ID 437119.1]
Oracle Applications Multiple Organizations Access Control for Custom Code [ID 420787.1]
SQL Queries and Multi-Org Architecture in Release 12 [ID 462383.1]
Setting APPS Context is mandatory step while loading data using public APIs [ID 473615.1]
Thanks,
Hussein -
Custom Report to display Material Number PR00 K004 KF00 MWSTand Total net e
Hi All
I am supposed to develop a report for pricing which is used to quote prices to the customers with all the components of pricing in different columns shown below.
Material Number PR00 K004 KF00 MWSTand Total net effect in different columns and their values using one single report.
Can you please share your experiences
Thanks in advance for your help
Regards
Anishka.Check T.code V/LD
Hope this help you
Senthils -
Small clarification of Opening balance.
Hi SDN Experts,
i want small clarification. regarding my report, my report is displaying Opening Balance, Line Items and Closing balance for given GL accounts, comp code and posting date..
my problem is it is working good, for those GL accounts having Line Items, but problem its not displaying O.bal for GL accounts those are not having Line Items.
but my requirement is i want print all given GL accounts with 0.00 line Items for those r not having Line Items.
plz anyone can help ,
Thanks & Regards,
sudharsan.Hi Anji Reddy Thanks for ur quick replay,
in my report am using, GLT0 for O.balance and BKPF , BSEG for Line Items.
Regards,
sudharsan. -
Opening Balances and Closing Balance of customer
Hi,
Does SAP provide any standard customer account statement for Opening Balances and Closing Balance for specific date range have given in selection screen?
The statement also contains reference number, order, and Delivery number.
Note: FBL5N Transaction code will not sufficient for the requirement, so looking for any other transaction code / report provided by SAP already for it.
Thanks in advance,
ShwethaHi,
There are several standard reports which could be easily accessed through the menu (Accounts Receivable - Information systems). If none of these reports does not suit your requirement, you have to develop your own.
Regards,
Eli -
Fault found with opening balances output on Trial Balance report
When running the Trial Balance report and adding "Opening Balances" and taking the "OB from Start of Fiscal Year" option, the relevant opening balances are not shown from the closing balance of the prior period.
All balance sheet accounts should always show a "brought forward" balance if one exists, whereas P&L Accounts should only carry balances forward over monthend boundaries, resetting at the point of a yearend. This is not the output provided by the report.
This issue has been checked on numerous patch levels (including the beta release of 2007a SP01 by a support consultant) and returns the same problem.Hi Julian,
I checked the functionality by myself and I have two findings:
1) that the Trial balance displays in the opening balance balances for the P&L accounts from previous period.
2) On the other side there is a functionality "Add closing balances" on the Trial balance selection criteria with option "Closing balances before Selected Period Only" which would adjust the presented opening balances for P&L accounts in point 1.
Based on your description I understand that Global Support Center knows about the issue, so I think the point 2 could be used as temporary workaround till the system is corrected.
Best Regards,
Martin Slavik
SAP Business One Solution Manager
Maybe you are looking for
-
I downloaded and installed the latest drivers from HP and also downloaded and installed the print diagnostic utility, which found no problems. The printer is plugged into a USB port and the print queue shows the job I've just sent but the job just h
-
Hi Experts, I have been trying to access the CMS and trying to click on the "update CMS" or "Save Domain" buttons. Then i am getting the following error. Please let me know how to rectify this error. SLD (URL http://127.0.0.1:50100) server exception:
-
All events and albums are gone from iPhoto
My library is still in the same location and still 540GB big, but when I open it there is nothing in iPhoto.
-
Movie won't play from start to finish
I'm an idiot I know but I'm editing my first movie and can't find the answer to this in the online brochure. Here's the problem: 1. I've assembled all of my clips in the video track. 2. Have not inserted any transitions because I was having trouble w
-
Lightroom 2 won't launch after install
After installing onto an XP 32-bit machine that already had Lightroom 2 Beta running, Lightroom 2 now refuses to launch. It is an upgrade version loaded from disc but has killed off all the other versions, too. I have un-installed and re-installed re