Reqirement Assignment Tab in Maintenence order

Dear Experts,
I'm struggling to bring the "Requirement Assignment Tab"in the maintenance order, altough all the pre-requsits in the work centre like Other formula SAP008/SAP004/SAP00 distribution formula have been maintained including the HRMS is also maintained in work centre.
I have checked most of the links/threads on google but no success, could some one please help me out is some other configuration is there.
Sorry forgot to add I need this for Multi Resource Planning so that I can use it in splits of the assignments.
Your valuable inputs are welcome.

Garry,
You get a warning message if you get them the wrong way around.
The standard settings for PM/CS are:
Capacities tab: Other formula: SAP008
Scheduling tab: Other formula: SAP004
Costing tab: Formula key for costing: SAP008
They should work as standard - assuming no one has changed the formula settings in the IMG.
PeteA

Similar Messages

Requirement assignment tab in PM order

Hi, Gurus
I just want to know ,when and how i can use requirement assignment tab i PM Order . How it can be used.Is there any config sttings for it.
When i am cretating WC for activity based costing , Requirement assignemnt tab is not there .

Hi
There is no config required for requirement assignment tab
You can split the work using the employees.. and assign particular work hours to them
- Pithan

Inspection lot of type 04 in "assignment" tab in Process order

Hai,
How do I make the Inspection Lot that was generated based on 04 Inspection Type in the Process Order - "Assignment" tab?
Thanks in advance,
Sonali

Hai,
Thanks for your reply. I could find the entries for all inspection types under Production order type (for example, PP01) in the config , but could not find entries other than 03 inspection type in PI01 order type (Process Order). Is this standard? How do i get all inspection type entries in Pi01 order type? At least, 04.
Also, if I have both 03 and 04 active for the material, then which inspection lot the system populates in the "assignment" tab?
Thanks
Sonali

Requirement Assignment Tab on Work Order

Hi Gurus,
I am working on capacity planning.I am creating an order & putting some requirement let say 2HR. with the help of capacity levelling in CM25, I am dispatching the manpower against that req, which is getting updated in PM order on requirement assignment tab.After conpletion of job I am doing techo. Now my qyery is :
1. During teco, requirement assignment tab is not there in order.
2. If I am cancelling that Teco of order, manpower which is udpated thorugh CM25 in order, is getting clear.
Is this the standard system behaviour, if yes, please guide me what is the reason. In case of no, how to solve this.
Thanx in advance

Hi,
As mentioned, it is expected that requirement assignment data is deleted at time of technical completion. Documented in KBA/Note [1634839|https://bosap-support.wdf.sap.corp/sap/support/notes/1634839].
-Paul

MAKE BUSINESS AREA MANDATORY IN ACCOUNT ASSIGNMENT TAB IN PURCHASE ORDER.

What I've done is in dev server is made BUSINESS AREA mandatoy for"A" asset acc assign category, so that while creating a capital purchse order, one should mandatory give input at BUSINESS AREA field in purchase order.
This all setting i've done in OME9.
Till now everything is OK in PO creation except the fact that system is not asking for Business area, infact it is picking the same business area which is present in asset code.
i.e. when i give asset code, it is automatically proposing the business area from asset code and instead i want the system to compulsory ask for business area.
By this I can be sure that the asset code authenticity...
Thanks and Regards...
rahul

go to SPRO > MM > Purchasing > Purchase order > defiene screen layout at document level
and check for the field "Business Area". to do the field as mandatory, the field should be available here.

Rejected Quotation number is coming in account assignment tab in sales orde

Hi Friends,
I have created one quotation 'X 'and after that I created one more quotation'Y' with the reference of original quotation'X 'and rejected the earlier created quotation 'X'.
After that I created sales order'Z' with the reference of quotation 'Y' but while i go to account assignment tab at ' order field' at sales order item level than the cancelled quotation no. is there coming.
As per my knowledge quotation no. 'Y' should flow in sales order account assignment tab in 'order field'
My question is why rejected quotation no. is flowing there in account assignment tab in sales oreder ??
And what is the use and impact of sales order field under account assignment tab at item level in sales order??
This is scenario of MTO and we are using billing plan at sales document header level.
Regards
SV
Edited by: sv.sap09 on Dec 6, 2010 1:22 PM
Edited by: sv.sap09 on Dec 7, 2010 7:31 AM

FYI-
"Order field" at item level in sales order - account assignment tab refers Internal Order number ( created by using Tx:KO01), this is not SD orders.
You might have same number range for Internal Orders & quotations. Hence confusing with the number.
Quotation number will be available only in document flow & document status table VBUK. will not be displayed in order transaction.
Regards,
Reazuddin MD

FM/BAPI to update requirements assignment on a PM order

Hello,
I am working on a project which involves building interfaces between a client's SAP ECC system and a third party scheduling system. The orders are created in SAP, interfaced to the third party, where they assign resources and schedule appointments. Hence we need to build is inbound to SAP, to update the "requirements assignment" tab of PM order operations - transaction IW32.
I have looked at BAPI_ALM_ORDER_MAINTAIN, but this doesn't provide this specific functionality.
Does anyone know if there is any other type of function module which enables this to be created/updated?
The data appears to be stored in table KBED - capacity requirements.
Many thanks in advance,
Peter

Hi Balaji,
After lots of search and trials, I have gave up on the function group CY_BT*.
I eventually used direct update on the database tables of the Requirements Assignment.
Using SQL Trace and Runtime Analysis of the transaction IW31/32, I have been able to imitate the standard SAP process for creation, update and deletion and the effect of every scenario on the database tables:
KBED     Capacity Requirements Records
KBEZ      Add. data for table KBED (for indiv. capacities/splits)
KBKO     Header Record for Capacity Requirements
Combine that with locking mechanism, you will get your results.
Just build a Z-'BAPI'. The best cost-benefit balance, as far as I am concerned.
Good luck,
Kamal.

Sales order no and line item no in account assignment tab of line item no.

Hi All,
When we display a sales order and go to line item --> Account assignment tab --> we can see sales order no and line item no in that screen. We want to know from where this existing no. in that field is populating from.
We want to know this as we want to check feasibility of changing sales order and item no to maintenance contract no and line item no. ( Maintenance contract we have to pick from notification)
If anybody has any idea about this do let me know as this is urgent requirment.
Effort will be rewarded.
Thanks in advance.
Edited by: Satish Bharambe on Jul 4, 2008 10:38 AM

Hi Satish,
You mean Accounting assignment tab-->In Settlement rule details
If yes the order number which is coming in that field Sales order and for which sale order you are looking that details both are the same numbers(i.e Nothing but sales order number).
When you create sales order system will give number of the sales order the number will come in this place.
I hope it will help you,
Regards,
Murali.

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

Add field 'asset' in sales order line item account assignment tab

Hi,
I would like to add the following field: 'asset' in sales order line item account assignment tab.
I can enter order, or wbs, but not Asset.
How can I make this field visable?
Anybody?
thanks,
klundert
Edited by: Eric Van Zundert on Oct 30, 2010 8:43 AM

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

How to keep the WBS & Order in account assignment tab of SD contract item?

Hi Experts,
If I remove the plant from the shipping tab in the contract item (the contract type is WV), I will be able to enter the WBS or Order in accounting assignment tab. However, if I enter the plant (in order to determine the tax in pricing), the WBS and Order are disappered and there is one new settlement rule button showed up.
Do you know any configuration could keep the WBS and order in the accounting assigment tab even the plant is there.
Thanks in advance!
Norman

Hi Chandra,
Thanks for your answer. However, I even added the plant in the WBS, the tax (we use tax jurisdiction) still could not be determined.
The problem is that SAP changes the account assignment tab screen (it suppresses the WBS and Order fields, but addes settlement rule) with the plant in the shipping tab. Do you know how to keep the same account assignment tab screen with the plant in the shipping tab?
Thanks,
Norman

Order field at item level Account Assignment tab in Inquiry

Dear All,
What is the purpose of u2018Orderu2019 field in account assignment tab of Inquiry?
When we are running sales pricing DP81, face the error u2018reference is incompleteu2019. So, I had to give the Order no. If it is intended for Profitability segment, what is the importance to PS?
We have assigned WBS and system det. Profit centre from WBS. But, getting the error u2018Order xxxxx is a networku2019 while trying to give network no. from dropdown button.
Is there a possibility, we can suppress the Order field.
Also, where does (tcode) system pick the values for item category in sales pricing? Cause, the required determination exists in VOV4 and in material master.
Regards,
Venkat

item category is determine from Item Catergory group in Mat master and Sales Doc Type.

Requirement assignment tab in Maintenance Work order

Hi Gurus,
I have a query ..I want to know the customizing settings for Requiremnt assignment tab in internal operation tab for internal operations in maintenance work order .
Thanks ,

Hi sundar ,
This Path is available in ECC 603 and we are using ECC6 . so not able to get the Path .
Anyways Thanks for your Help .
I have one more query regarding this:
When I assign one Resource to Reqmnt assignment tab and give any date of friday then the date is automatically switches to Monday's date . the Work schedule for that person is from Monday to Friday but then also it shifts the date to Monday .
Can you please suggest on this .
thanks !!

Production order, put cursor on field in Assignment Tab

Hi,
I work on an enhancement for production order...
When a user created a production order, if the "Profit Center" (in "Assignment" tab) is empty at saving, a popup is displayed to inform the user that he could filled this field. If he doesn't want to do this, he clicks on "Continue" button, elseif he wants to fill "Profit Center" field, he clicks on "Modify".
My problem is when the user clicks on "Modify" button, I would like that the "Assignment" screen appears and the cursor is located on the "Profit Center" field. I take a look on technical information and the only info that I can use is the screen 0115. But I can't indicate the position to the cursor !
Can anyone help me?
Thanks in advance.
Best Regards.

Hello,
You can try with 'Implicit Enhancement' in PBO of that screen 0115 and use 'SET CURSOR FIELD..statement' by checking user command..
Thanks

Automatic population of Order field in the Account Assignment tab in VA01

Hi Experts,
May i ask if the Order field in the Account Assignment tab in creating Sales Order ( VA01) will automatically populated when the Alt. Int. Ord field in the Additional Data B tab do have values?
If YES, what are the needed configurations to meet this kind of functionality?
Please advise.
Liz

Please through some more light on that.
As per my under standing you want to populate the Value from one field to another field.
If is it so you can do that with the help of good ABAPer who can populate the value from one Location to another Z-Location.

Reqirement Assignment Tab in Maintenence order

Similar Messages

Maybe you are looking for