Reqs for Webdynpro for ABAP

Hi All,
We are planning to integrate WebDynpro runtime environment in ABAP workbench.
We are currently on WAS 6.20. I wanted to know how can we upgrade to WAS 6.0. Will just applying patch would be enough...?? ..
What else we will need to set up developement environment for Webdynpro for ABAP..??
Thanks and regards.

Is this a standalone WebAS 620? In that case you would have to upgrade the entire system to Netweaver04S. There is no simple patch or add-in that you can install to give you Web Dynpro ABAP.
If this is an R/3 system running on top of WebAS 620 - that would R/3 Enterprise 4.7; then you would have to upgrade the entire application to ERP2005. ERP2005 is the "version" of R/3 (actually ECC 6.0) that runs on top of Netweaver04S. If this is any other application then you would have to upgrade to the appropriate release level that runs on top of Netweaver04S in a similar manner.

Similar Messages

What is used for WebDynpro for ABAP?

hi all friends,,
what is used for WebDynpro for ABAP?
Thanks,
S.Suresh.
Title was edited by:
        Alvaro Tejada Galindo

Hi
Web Dynpro for ABAP - Getting Started
Web Dynpro for ABAP is SAPs new standard UI technology for developing user interfaces in the ABAP environment. In the long term Web Dynpro for ABAP will be the successor of the traditional screen (Dynpro) based user interface technology which is based on the SAP GUI. Available with NetWeaver 7.0 (2004s) Web Dynpro for ABAP provides the same declarative UI development paradigm as Web Dynpro for Java directly out of the NetWeaver ABAP Application Server. Web Dynpro for ABAP allows the development of user interfaces directly within the ABAP Workbench (SE80) and the Web Dynpro runtime environment is a central part of the ABAP server and can be used in any SAP solution based on NetWeaver 7.0 (2004s) without the need of an additional server installation.
Web Dynpro for ABAP allows the development of user interfaces in a declarative way by providing a mighty framework which abstracts the rendering technology from the core UI definition tasks. The Web Dynpro developer declares the layout and behavior of the UI without caring about HTML, JavaScript, browser specifics or the HTTP protocol. Instead the focus lies on designing graphically Web Dynpro components based on the Model View Controller model, which enforces a clear separation between the UI layer and the underlying business logic.
This declarative Web Dynpro programming model enforces the developer to focus on the tasks of
Designing the layout of the visible views (where should the table be placed, do I need tabs, how should the button look?)
Declaring the flow and behavior of the application (flow between views, which event is triggered by which button click, etc)
Defining the data binding (which internal table is displayed in a specific table, etc)
Implementing the event handlers and controller methods.
Without making any assumption about the used rendering technology, like which browser should be supported or if the Web Dynpro application will be later displayed in a web browser via HTML at all or in another kind of client with completely different rendering capabilities.
The Web Dynpro Frameworks provides all important UI features directly out of the box:
All elements (tables, buttons, trees, dropdown list boxes, etc) necessary for state of the art user interfaces are provided by the Web Dynpro Framework in the form of predefined UI element libraries.
Complex features and behavior of UI elements.
Internationalization of the UI. All visible strings in a Web Dynpro ABAP UI are handled by the translation system and are translated in the same translation environment like other ABAP language dependent resources. All texts are displayed automatically at runtime, dependent of the users credentials.
Accessibility features are directly built into the framework and UI elements.
A unified rendering engine generates at runtime the data which is sent to the specific client application, which is not limited to browsers but includes the NetWeaver Business Client.
All this is available in the established environment of the ABAP application server and well known capabilities like the transportation and change management system, security environment, test and performance analysis tools or remote debugging can be used like in common ABAP development.
Learn about the Web Dynpro for ABAP technology with the resources below, and post your related questions and answers to the Web Dynpro forum.
Web Dynpro for ABAP: Sneak Preview
Download, License Key Documentation, and Installation Guide available here.
Web Dynpro for ABAP: Tutorials for Beginners
SAP NetWeaver Product Management provides this set of tutorials for getting started with Web Dynpro for ABAP technology.
SAP Help Portal: Web Dynpro for ABAP
This online SAP documentation goes into detail about Web Dynpro architecture and programming, Web Dynpro for ABAP administration and security, and more.
Web Dynpro - Not Just for Java Developers Anymore   (PDF 3.8 MB)
In this SAP Insider article, SAP Product Manager Karl Kessler describes the tools of Web Dynpro for ABAP and uses a simple flight report example to highlight new and updated tools in the familiar ABAP environment.
Community Contribution: WDA Tutorial I - Getting Started with Web Dynpro for ABAP   (PDF 2.5 MB)
Software Engineer Rich Heilman provides this step-by-step guide for developing a Web Dynpro for ABAP application.
Going into Details
Basic Concepts - Selection vs. LeadSelection
In this blog, Thomas Szuecs of the Web Dynpro for ABAP development team shows how selection and LeadSelection works in Web Dynpro for ABAP.
Web Dynpro for ABAP: Recreate the SE16 Data Browser   (PDF 386 KB)
In this tutorial, Thomas Jung of SAP NetWeaver Product Management shows how to create a data browser simulator using Web Dynpro for ABAP.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/80aef577-543f-2a10-d19c-d83a565efe37 [original link is broken]
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Suggestion for a good book for webdynpro for java

Hi, I am new to this technology,and i know a little bit basics,but i want to learn in depth regarding Webdynpro For Java and my backend is SAP R/3
can anyone suggest me a good book for webdynpro for java

Hi padma,
Check this link.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#9">Web Dynpro Sample Applications and Tutorials</a>
Re: Guides for new entrant to Webdynpro
Regards,
Mithu

Support for webdynpro for abap in caf guided procedures

Hello,
when will webdynpro for abap supported in caf guided procedures?
Best regards
Oliver Prodinger

Hi,
You can create ABAP Web Dynpro callable object in GP. Please refer the following document for the same :
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cbabed1-0c01-0010-dba5-bdddbadfe586">Creating a Callable Object in Group - Web Dynpro ABAP Application</a>
Thanks,
Dipankar

Book for webdynpro for java

Suggest me some good books in webdynpro for java, which are available in india.
Send me some useful documents also

<b>Hi
Check these links and you may get some idea
What is Web Dynpro?
What is Web Dynpro?
Why WebDynpro ?
Why WebDynpro ?
Why webdynpro and not BSP or JSP?
Why webdynpro and not BSP or JSP?
BSP to WEB Dynpro
BSP to WEB Dynpro
Benifits of using Webdynpro
Benifits of using Webdynpro
Java vs. ABAP
Java vs. ABAP
regarding Java related webdynpro
regarding Java related webdynpro
Web Dynpro vs. Struts - a few questions
Web Dynpro vs. Struts - a few questions
What kind of applications are being developed with Web Dynpro?
What kind of applications are being developed with Web Dynpro?
This url links to a short pdf file describing the Webdynpro Java
"Inside WebDynpro Java" Pdf File 2.50 MB (54Pages) really Good One for Beginners
http://searchsap.techtarget.com/searchSAP/downloads/SAPPRESS.pdf
Regards,
Chandran</b>

Using LoadRunner for WebDynpro for Java Tests

Hi,
We're develoing WD4J applications and want to test those applications with LoadRunner.
I can create Vuser Scripts and Run them with multiple users via Loadrunner Controller successfully but here are my questions;
- I've tested a PHP application which submits data to an email address by using Web (HTTP/HTML) Script Protocol and when I run this Script via Controller for 10 Vusers, 10 emails are sent to the recipient.
- I've created a WD4J application which does the same but when I run this application for 10 Vusers it doesn't send any email. I've tried this with "Web (HTTP/HTML)" and "SAP - Web" Script Protocol but no sccess. Script replay doesn't gives me error.
My Question is Why? What I've to set during Script Creation?
Also, is this the right place to aask this question or where else I can ask?
Regards

Hi Huseyin,
I guess that your script does not handle the user dependent information of WebDynpro correctly.
Assuming you did not already do that, here is what I would do:
1) Check that sending an email through the application works manually.
2) Build text checks into the script to make sure you get the system responses you expect
3) Check that there are the proper corellations in the script such that user dependent information is processed correctly.
Cheers,
Martin

Excel File Upload In Webdynpro For ABAP

Hi All,
I have a doubt regarding EXCEL file upload for Webdynpro for ABAP.
I am able to get the path of file using 'FILEUPLOAD' UI element.Now I need to upload the EXCEL file into ALV.I have tried out with GUI_UPLOAD and other excel upload function module.But these Function Module throws Dump.
Can you please suggest how to go about it.It will be a great help if u can suggest any function module or method.

Hi Amita,
Insetad of using GUI_UPLOAD use 'HR_KR_XSTRING_TO_STRING'
Here is the sample code,
TYPES :BEGIN OF str_itab,
              name(10) TYPE c,
              age(10) TYPE c,
             END OF str_itab.
DATA : t_table1 TYPE STANDARD TABLE OF str_itab,
       i_data TYPE STANDARD TABLE OF string,
               lo_nd_sflight TYPE REF TO if_wd_context_node,
                lo_el_sflight TYPE REF TO if_wd_context_element,
                l_string TYPE string,
        fs_table TYPE str_itab,
                l_xstring TYPE xstring,
fields TYPE string_table,
lv_field TYPE string.
DATA : t_table TYPE if_main=>elements_data_tab,
data_table TYPE if_main=>elements_data_tab.
* get single attribute
wd_context->get_attribute(EXPORTING name = `DATASOURCE`
                          IMPORTING value = l_xstring ).
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
EXPORTING
in_xstring = l_xstring
IMPORTING
out_string = l_string.
SPLIT l_string AT
cl_abap_char_utilities=>newline INTO TABLE i_data.
* Bind With table Element.
LOOP AT i_data INTO l_string.
SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE
fields.
READ TABLE fields INTO lv_field INDEX 1.
fs_table-name = lv_field.
READ TABLE fields INTO lv_field INDEX 2.
fs_table-age = lv_field.
APPEND fs_table TO t_table1.
ENDLOOP.
lo_nd_sflight = wd_context->get_child_node( 'DATA_TAB' ).
lo_nd_sflight->bind_table( t_table1 ).
ENDMETHOD.
if correct give correct answer
Thanks & Regards,
Meenachi.R

In webdynpro for ABAP alv table issue

hello gurus,
                  i am new for webdynpro for ABAP.i strucked at one point at designing time.anybody could you suggest me on this.
thanks in advance.
let me explain my scenario first.
in my webdynpro for ABAP developement i have one alv table having ten fields.i am featching the data for eight fields from one Ztabale and updating , for rest of two fields we need to fill after displaying output using the respective F4 help. Right now these two fields are in input editable mode.now i am getting the values successfully from F4 help and at the same time it is allowing MANUAL ENTRIES also but as per my requirement it should not allow any manual entries . for this i have made these two fields are in readonly mode as like as rest of fields to avoid the MANUAL ENTRIES but at this time i didnot get any F4 helpfor those two fields.
so how can i achive my goal in this thing could any one suggest me.
my final conclusion is we need to get only F4 help values into those two fields . it should not allow any manual values at any point of time.
best regards,
babu

ya hi harshit,
      my self also used same code in my action part . here i have one table with four fields carrid , connid , fldate , price.
for carrid i have created freely programmed search help.but if it is in display mode there is no F4 help in enable mode.
in context for attribute carrid
DATA lo_nd_flight TYPE REF TO if_wd_context_node.
DATA lo_el_flight TYPE REF TO if_wd_context_element.
DATA ls_flight TYPE wd_this->element_flight.
DATA lt_flight TYPE wd_this->elements_flight.
navigate from <CONTEXT> to <FLIGHT> via lead selection
lo_nd_flight = wd_context->get_child_node( name = wd_this->wdctx_flight ).
select connid fldate price from sflight into CORRESPONDING FIELDS OF TABLE
    lt_flight UP TO 20 ROWS.
@TODO handle non existant child
IF lo_nd_flight IS INITIAL.
ENDIF.
get element via lead selection
lo_el_flight = lo_nd_flight->get_element( ).
alternative access via index
lo_el_flight = lo_nd_flight->get_element( index = 1 ).
@TODO handle not set lead selection
IF lo_el_flight IS INITIAL.
ENDIF.
get all declared attributes
lo_el_flight->get_static_attributes(
   IMPORTING
     static_attributes = ls_flight ).
CALL METHOD lo_nd_flight->bind_table
EXPORTING
    new_items            = lt_flight
   set_initial_elements = ABAP_TRUE
   index                =
DATA: lo_cmp_usage TYPE REF TO if_wd_component_usage.
DATA: lo_interfacecontroller TYPE REF TO iwci_salv_wd_table.
    instantiate ALV component usage if necessary
lo_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
    lo_cmp_usage->create_component( ).
ENDIF.
    pass reference to data node to instance of ALV usage
lo_interfacecontroller = wd_this->wd_cpifc_alv( ).
lo_interfacecontroller->set_data( r_node_data = lo_nd_flight ).
Configure ALV
DATA lr_config TYPE REF TO cl_salv_wd_config_table.
lr_config = lo_interfacecontroller->get_model( ).
**declerations
DATA: lt_columns TYPE salv_wd_t_column_ref,
        ls_columns TYPE salv_wd_s_column_ref,
        lr_input TYPE REF TO cl_salv_wd_uie_input_field,
        name TYPE string,
        lt_node_info TYPE wdr_context_attr_info_map,
        ls_node_info TYPE wdr_context_attribute_info,
        lv_tabix TYPE sy-tabix,
        lr_info TYPE REF TO if_wd_context_node_info.
TYPES: BEGIN OF ty_name,
          name TYPE string,
         END OF ty_name.
DATA: lt_name TYPE TABLE OF ty_name,
        ls_name TYPE ty_name.
**for getting node info
*Get the context node information
lr_info = lo_nd_flight->get_node_info( ).
lt_node_info = lr_info->get_attributes( ).
LOOP AT lt_node_info INTO ls_node_info.
    CASE ls_node_info-name.
      WHEN 'CARRID'.
        ls_name-name = ls_node_info-name.
        APPEND ls_name TO lt_name.
     WHEN 'REGIONALOFFICER'.
       ls_name-name = ls_node_info-name.
       APPEND ls_name TO lt_name.
     WHEN 'INSPECTORNAME'.
       ls_name-name = ls_node_info-name.
       APPEND ls_name TO lt_name.
    ENDCASE.
ENDLOOP.
*Logic for Table Horizontal Scrolling
lr_config->if_salv_wd_table_settings~set_visible_row_count( 13 ).
" lr_config->if_salv_wd_table_settings~set_width( '1085' ).
lr_config->if_salv_wd_table_settings~set_width( '100%' ).
lr_config->if_salv_wd_table_settings~set_scrollable_col_count( 8 ).
" lr_config->if_salv_wd_table_settings~set_fixed_table_layout( abap_true ).
lr_config->if_salv_wd_table_settings~set_first_visible_scroll_col( 'CARRID' ).
lr_config->if_salv_wd_table_settings~set_cell_action_event_enabled( abap_true ).
Set the table editable .
DATA: lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= lr_config.
lr_table_settings->set_read_only( abap_false ).
lr_table_settings->set_read_only( abap_true ).
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
        lr_column TYPE REF TO cl_salv_wd_column.
DATA: lt_string TYPE STANDARD TABLE OF string,
        ld_string TYPE string,
        ld_int TYPE i,
        lv_index TYPE i.
Make few columns editable and attach inputfield, if permitted.
    DATA lr_input_field TYPE REF TO cl_salv_wd_uie_input_field.
    CLEAR lt_string.
    APPEND 'CARRID' TO lt_string.
    LOOP AT lt_string INTO ld_string.
      lr_column_settings ?= lr_config.
      lr_column = lr_column_settings->get_column( ld_string ).
      CREATE OBJECT lr_input_field
        EXPORTING
          value_fieldname = ld_string.
      lr_input_field->set_read_only( abap_true ).
      lr_column->set_cell_editor( lr_input_field ).
    ENDLOOP.
    CLEAR lt_string.

WDA: TreeByNestingTableColumn and ALV in webdynpro for ABAP

Hi,
1) I am trying to implement a tree with nested structure and multiple columns. I am using RecursionNode in the context and UI element TreeByNestingTableColumn. I am not able to figure out how to make a distinction between the key and parent key. In TreeByKeyTableColumn, we use key and parent key to differentiate. Is there any link which explains how to implement TreeByNestingTableColumn in Webdynpro for ABAP? (I got a link for webdynpro for java though).
2) Can ALV be used to implement a tree structure instead of using Table with TreeByNestingTableColumn or TreeByKeyTableColumn? Then I would be readily able to use ALV features like sort etc. If it can be used is there any link which explains how to do it in Webdynpro for ABAP?

Hi Srinivasa,
I can answer the first point. If you use a recursive node and TreeByNestingTableColumn, there is no need to have a rowKey and parentRowKey, since the recursion with the context already defines the hierarchy. As far as I know someone posted a blog that explains how to use the TreeByNestingTableColumn in Web Dynpro Java. I don't have the link available, but this blog would be good place to start. The implementation in WDA and WDJ is pretty much the same here.
Kind regards,
Thomas

Webdynpro for ABAP materials

anyone please send me materials for webdynpro for abap which covers webdynpro architecture like mvc controller and everything

Hi Ganesh,
Welcome to Web Dynpro ABAP !
In web dynpro ABAP we follow MVC(Model View Controller) architecture.
In this object oriented ABAP is used to provide background functionality. Here, your ABAP skills can be utilized to the fullest. Programming in web dynpro ABAP is different than conventional ABAP programming. Here we strictly follow MVC architecture in terms of controller interface. Also there are many wizards available so that we can directly pick the code from wizards.
e.g We can call BAPI through a service call in web dynpro application. Thus automatically backgroud code for BAPI execution will be generated.
To start with Web dynpro ABAP you can try following tutorial:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
You can start with tutorials and all. There are around six tutorials in SDN library.
Web Dynpro for ABAP
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
best tutorials in wbdynpro for ABAP to start with :
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
1) This is basic Info of WD ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
2 ) I can give you links that can help you a lot.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Also, SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
Hope I have helped you .
Cheers,
Darshna.

Comparison between WebDynpro for ABAP vs. WebDynpro for Java ??

Hi,
Can someone tell me when should we go for WebDynpro for ABAP and when WebDynpro for Java. Is there any link where SAP recommends the one for the other.
Thanks in advance
Regards
Mukesh

Hi Mukesh,
Both are having its own strengths!! )
I think it all depends on your project requirement and the availabel resources.
If the developer is good in OOPs ABAP then he must go for Web Dynpro ABAP. But if anyone is good in JAVA then that person should go for Web Dynpro JAVA.
*In Short almost all Features supported in webdynpro ABAP are also Possible in webdynpro Java.
1] Webdynpro Java
Supports,
webservice
RFC Models
Accessing Portal information in Java
Easy sending E-mail
Strictly follows MVC architecture which seperate Business logic and Process flow.
Webdynpro Java is webbased programming model to develop SAP Applications.
Easy to learn
Easy to integrate in Enter prise portals.
Dynanamic Programming
*Easy access to R/3 Via RFC technology (Models)
2] Web Dynpro ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
Hope this helps and solve your Problem
Cheers,
Darshna.

Is WebDynpro for Java going away?

Hi,
Is SAP planning to completely Switch from Webdynpro for java to webdynpro ABAP? What is the future for Webdynpro for java in that case? Like old ITS technology will SAP completely remove support for WebDynpro for Java development!
With Regards,
Nitesh Shelar

Please refer ht[WD for Java going away??|WD for Java going away??]

IDES ECC 6.00 WEBDYNPRO with ABAP-

Hi ,
I have Install IDES ECC 6.00 on my own Desktop for personal use.
Now i want to go for WEBDYNPRO with ABAP.
So please let me know need to install any other s/w or tools?
Wait for prompt Reply.

Hi,
Please check for the installation procedure of WDA in the SAP Basis or Netweaver Forum.
You can find the related threads in that forum.
Regards,
Lekha.

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Reqs for Webdynpro for ABAP

Similar Messages

Maybe you are looking for