Request advise ??

Hi Gurus,
I am very new to SAP and don't know where to start and i am interested in learning SAP BASIS Administration as my background is Administering Oracle Applications..Request your advise on where to start ?? What is sap basis (is it different from sap NetWeaver?? ) Can i install a trial version and test it out ??? and more details ..Request Request Request .......
Vishnu Singireddy

Hi,
Basis is a set of middleware programs and tools from SAP, the German company whose comprehensive R/3 product is used to help manage large corporations, that enables applications (such as FI, CO, and SD, for example) to be seamlessly interoperable and portable across operating systems and database products. R/3 Basis includes client/server architecture and configuration, a relational database management system (RDBMS), and a graphical user interface (GUI). In addition to the interface between system elements, Basis components include a development environment for R/3 applications, and a data dictionary, as well as user and system administration and monitoring tools.
So,you should have knowledge about R3 systems and its application.Knowledge in ABAP is also advisable.
You can go through ADM100 also.

Similar Messages

Purchased Homesharing; Homesharing is working on all three Apple devises except for Apple TV. Apple TV is showing photos, but not music. My computer is "authorized" but it is not showing up on my Apple TV. Request advise.

Apple TV is not showing the authorized computer on my network. All three other Apple devises are sharing. Apple TV is getting my pictures, but not my music or iTunes Match.

It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

Requesting advise for career in SAP SD

Greetings Expert,
       I am Thanraaj. My educational qualification is MBA Marketing and B.Tech Automobile engineering. I have an experience of 9 months in sales [ retail sales - ICICI securities ltd.]. I have resigned my job now.
       I am interested in doing SAP and so i consulted a SAP Authorized partner at Chennai. They are recommending me to do SAP SD module. The module duration is 25 days with a fee of 3.6 lac's. They are assuring for 100% placements too.
      My concerns are;
1. Am I really eligible for doing the SAP SD module? Is my experience enough?
2. After doing this module and getting certified, what is the possibility of getting placed as a fresher in SAP SD with 9 months of experience in sales?
Kindly, assist me to take a right decision.
Thanks in advance,..
Message was edited by: Colleen Lee - changing title to remove the air of impatience!

Is my experience enough?
Honestly, not enough to become as a SD Functional Consultant
They are assuring for 100% placements too.
Almost all training centers will give this promise because they dont want to lose the amount what you are going to pay. But at the end of your training, they will tell that if any suitable opening comes, will let you know by email. For this, you need to continuously follow up with them. If I am correct, statistics says hardly 1% of the student get placement through their training centers. Of course, there are certain IT firms who employ SAP freshers, give basic training to handle tickets and put you in some project. For this, you are prepared to give an undertaking for couple of years. If you ask me which one to choose whether SD or CRM, I would prefer SD since it has wide opening globally than CRM.
G. Lakshmipathi

Requesting advise from fellow Forum Members

Unfortunately my Grandmother is starting to lose here memory in old age.
She lives closeby, but alone and is visited by carers and family members five times a day.
At the moment she is prone to ringing random telephone numbers saying that she needs taking home; even though she's already there. They are usually local numbers that are similar to family members' numbers.
A stranger to the family received a large number of calls in a very short space of time and was good enough to contact the police. We would ideally like to bar all outgoing calls; except those to close family members landlines so this can stop. We cannot bar everything as she could need to contact us in an emergency.
We cannot take the phone away as she has a push-button alarm which alerts the carers and results in them ringing the house.
Do BT offer this sort of service ? Effectively no bar on incoming calls but a partial bar on outgoing ones ?
Solved!
Go to Solution.

Hi
I am sorry to see you are having problems with your BT Service
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Master data attribute request unable to delete.

Hi ,
The problem which we are facing here is while tryin to delete the mater data attribute request, it pop ups with the following errors
The request is currently in "yellow'
Request &1 not extracted; request is in obsolete version of DataSource
Request &1 (&2) is not available
Any suggestions on how to delete the request.
advise needed.
thanks!

Hi,
It is not posible to delete request from master data objects.
Request administration is not possible in master data. The new request is overwritten in case of modified records.
You can selectively delete the master data, from master data maintenance.
Regards,
Nitin

Problem in repeating a subform with hidden text fields.

Hi,
Request advise on the scenario below:
The form consists of one master page and a corresponding page that is flowed. This contains two subforms : One with address fields that are hidden with the subsequent fields moving up, when the previous field is hidden. The layout being :
Name1
Name2
Addrs1
Addrs2
Addrs3
in the absence of anyone of these fields the one below gets moved up. The second subform in the page consists of a flowed suform which gets repeated multiple times and spans across pages as the data overflows. The data binding comes only from one set of data item hence the option for repetition based on each data item seems impractical.
Is there a way to display the address subform in the multipages created by the overflowing data, at the same position as in the first page? This couldn't be placed in the master page as then , the script for hidden fields doesn't work.
Thanks in advance..

Hi,
Contact me at [email protected] to share a sample PDF.
I just tried a sample for your requirements and it seems to be working.
Nith

Screen variant for Create Sales order

Friends,
I intended to make one of the fileds mandatory for a sales doc type. For which I made a new screen variant wherein I changed a setting for the reqd field and then assigned to a new transaction variant. This transaction variant would be then assigned to the doc type.
While testing for the screen variant it behaves perfect. While testing for the transaction variant (which has the screen variant as included) I am not getting the desired response.
Request advise on where I am missing out. Thanks in advance.
Regards,
Tariq

Hello Tariq,
try to maintain "NO_VARIANT" for field "Variant" in transaction VOV8 for the used sales order type. Then it should work.
Best regards,
Joerg

Failover between server farms

Hi,
I'm requesting advise on problem below :
- I have 2 datacenter with one server farm on each DC and 5 servers behind each server farm
- each server has 5k max connection limit on each server farm
- I want to be able to be able to failover to one SF to another when max connection for the server farm reach 25k (that mean each of 5 servers has reached its max conn)
Can I do that with partial-threshold ?
in Cisco documentation it's stated : "
Each time that a server is taken out of service (for example, using the CLI, a probe failure, or the retcode threshold is exceeded), the ACE is updated"
Would max-conn exceed be equivalent to "out of service" ?
thanks for any contribution
cheers

Hi,
I beleive Cisco ACE platform because of H/w design will not do failover for partial-threshold when primary server farms servers reached "MAXCONN" state and partial-threshold trigger. you will observe connection drop in that condition.
for your setup i will suggest to use simple backup server farm with no partial threshold. this work and when all the server in serverfarm are no longer usable (out of service or maxconn) back server farm will be activated.

[KDE] Kmix audio device preferences doesn't list physical devices.

This is a fresh installation. I added my bluetooth speaker and tried to set priorities in Kmix. However instead of the physical devices the priority list is
pulse
jack
alsa
I cannot help but think I'm missing a package but my googlefu is getting nowhere. Requesting advisement.
Packages installed from my script.
ARCHSW2="alsa-plugins alsa-oss alsa-utils avahi bluez bluez-hid2hci bluez-utils cronie cups gstreamer0.10-plugins hplip jre8-openjdk lib32-alsa-plugins lib32-libpulse libcups openbsd-netcat openssh pulseaudio pulseaudio-alsa rsync samba transmission-cli vim xf86-input-synaptics xf86-video-intel xorg-apps xorg-server xorg-server-utils xorg-xinit"
ARCHSW4="amarok bluedevil kcm-touchpad kdesdk-kate kde-meta-kdebase kde-meta-kdegraphics kde-meta-kdepim kde-meta-kdeutils kdemultimedia-kmix kdeplasma-addons libcanberra-pulse yakuake"
Last edited by TadaenSylvermane (2015-01-18 01:50:40)

Read the tv manual. HDMI instructions for connecting tv to a computer?

Unlocking the iPhone 5

Hi All,
Quite short sweet and simple, is it possible to unlock the iPhone 5?
My friend looking to purchase one of another friend, but apparently he says the iPhone is unable to be unlocked?
I used to change providers a fair few times with my old iPhone 4, via iTunes. I currently have the iPhone 5 but i don't really want to wipe my phone just to prove my theory to a friend; if anyone has any information that'd be great!
Thanks,
James

The process is carried out through the carrier
You only use iTunes to reset up the iPhone firmware to allow any sim to work
once the Carrier has agreed, processed the request , advised Apple to remove the iPhone
from the locked database
then you plug into iTunes
see here
http://support.apple.com/kb/HT5014
Any attempt to unlock by any other means will void the warranty and that device
will not be touched by Apple for anyfurther service or help

HP PLASMA TROUBLE

I HAVE A HP PL4260N, WE WERE LISTENING TO THE SIRUS CHANNEL ON DISH AND LEFT IT ON WHILE WE WERE GONE. WHEN WE RETURNED HAD SOUND BUT SCREEN WAS BLACK. CANT EVEN SEE TO OPERATE THE MENU!!!!
CAN ANYONE HELP?????

I have a HP 6500 Wireless and it is configured to do 2-sided copies. I use Word for the Mac and I can't get any thing that will let me do the 2-sided - only odd and even sided. It also goes wireless for a bit then has to be plugged back in but otherwise it faxes, copies, and scans. So over all happy - but do want to do double sided. I have gone to web, downloaded driver and still not option in the print program. Request advise!

I am working through a tutorial based on Illustrator CS6, but I am using CS5. The tutorial requests that I open "Image Trace" but I don't see this function on CS5... please could you advise what the equivalent tool would be? Thank you!

I am working through a tutorial based on Illustrator CS6, but I am using CS5. The tutorial requests that I open "Image Trace" but I don't see this function on CS5... please could you advise what the equivalent tool would be? Thank you!

I think in CS5, it was called "Live-Trace." Whatever it's called, it should become available on the options panel (the context-sensitive control panel at the top) when you select a trace-eligible raster image on your artboard.

Connected everything on my new (previous gen...not the new tower, mind you) TC, but can't get beyond flashing yellow. Had to reconnect my old router to send out the "HELP!" request. Can anyone advise, please?

Please advise. I just tried connecting my newly purchased (previous generation...not the newest "Tower" model) Time Capsule, but cannot get beyond the "blinking yelow light". I had to connect up my old router (the one I'm trying to replace with this new TC) just to send this help request. Can anyone please advise an old dude?

If you pulled out an existing router.. then you have a modem.. what modem is that? Explicit details help loads.. and loads.. and even more loads.. we cannot guess solutions without knowing the setup.
But you can simply configure the TC in bridge mode.. do it directly connected to the TC with ethernet wire.. LAN TC to computer and configure it in bridge.
Then setup wireless any way you want..
You can turn it off and still use the wireless on the old router.
You can setup a new wireless network.. and connect to that.
Or you can setup roaming network, ie use the same wireless name and same security settings and password as the existing router.. assuming it also has wireless.
Do nothing at all and it will still work..

I am constantly being advised that my information has been accessed by a "new" iMac. I only have ONE iMac. What gives? And what is with the constant request to "update" my information?

I am constantly being advised that my information has been accessed by a "new" iMac. I only have ONE iMac. What gives? And what is with the constant request to "update" my information? As well, I have had to change my password a number of times since migrating to Yosemite; again: what's this all about? I Apple going the way of Microsoft for some reason? I left the Microsoft community because of constant problems with their OS and the unending string of "security updates"; is Apple and my iMac becoming "just another crap computer"?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Advise Requested - Building a Home Server using Solaris 10

I'm currently a Wintel sysadmin, and I'm relatively new to Unix. I know the basics, and I have been reading up on it. I'll be taking a the 200 level Sun class in August or September. I'll be working with Solaris on an increased basis at work very soon. Since I've been thinking of building a home server for some time I thought it would be a good opportunity (and challenge) to teach myself Solaris by building a server with Solaris 10 for Intel processors.
I would like to setup a server with a RAID mirror. It's mostly going to be a Samba file server, Apache web server, and backup server for all of my home Windows Vista PCs. I'll likely put in two 1 terabite HDDs in it. I might also use it as a VPN server for my home network eventually as a I learn more.
Does anyone have suggestions they could give me on hardware? I prefer to build an ATX compliant clone.
So far this is the motherboard I'm considering:
http://www.mwave.com/mwave/skusearch.hmx?&scriteria=BA23931
ANY ADVISE would be greatly appreciated!!!!

Change your SSH port to something other than 22! Make sure your ssh keys use passphrases. You can setup keychain (ssh-agent) on the server and clients to keep keys in memory if you desire without constantly retyping (and for automated backups).
Scott

Request advise ??

Similar Messages

Maybe you are looking for