Request: AHCI/IDE controller mod for MSI EX610 BIOS v.3.09

Hoping to eliminate my windows 7 installation problem mentioned in https://forum-en.msi.com/index.php?topic=141925, I would like to request an AHCI/IDE and SATA controller (are they the same???) mod for MSI EX610 (latest BIOS Version is v.3.09), like the one that had been previously done for EX600:
Quote from: Svet on 28-May-09, 21:04:10
Purpose of the MSI EX600 Notebook 5.09 BIOS Mod:
* Rebuild option to control Sata controller mode per user request: http://forum-de.msi.com/index.php?page=Thread&threadID=90392
Would it be too much to ask to have swapped Fn/LCtrl buttons at the same time? (would it be possible to build this on the previous mod you've already done to swap Fn/LCtrl keys of EX610 at https://forum-en.msi.com/index.php?topic=123070.0 ?
Quote from: Svet on 31-December-08, 02:18:09
Purpose of the EX610 3.09 BIOS Mod:
* Reverse/swap the notebook keys functions of the "Fn" key with Left "Ctrl" key.
 {E.g "Fn" key will act as "Ctrl" key, and "LCtrl" will act as "Fn" key}
Thanks for all your help and support.
Donated as requested.
Best wishes

Quote from: Bas on 02-October-11, 03:44:06
AHCI/IDE is not an issue in this, Windows7 supports both.
The shutdown must have some other reason.
Vista was working beautifully on this machine. It has to be some driver /BIOS issue. Can however someone send me the modified BIOS, just to make sure. I would be very thankful.
Also, might be I need to preload some drivers for Windows7 to be able to finish smoothly? If so - were I can get the chipset drivers for Win7/Vista?
I still assume that as the original poster disappeared after he got the modified BIOS, his problem was solved with that.
Would be very thankful for any help.

Similar Messages

  • PLEASE Request: AHCI/IDE controller mod for MSI EX610 BIOS v.3.09

    Hello, please can you send me a link or an emaiil with this moded bios.
    Thanks

    it's available on donation: https://forum-en.msi.com/index.php?topic=134259.0

  • Request: Bios mod for MSI GT627, enable northbridge options

    Hi,
    I have an MSI GT627, report:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in Sun 21/02/2010 at 14:50:33.70
    Mainboard:  MS-1651
    PCB Version:  Ver 1.000
    BIOS Version: A1651IMS.112
    BIOS Date:  9/17/2009
    EC-FW Version:  1651EMS1 Ver4.32, 06/19/2009
    I would like to have the northbridge options that are available with the 10P BIOS (early version). Those options that I want are the memory frequency and timings.
    Also I would like to be able to use setfsb to overclock, like with the barebones version bios (is this possible)?
    Cheers

    Quote from: MH from NBR on 21-February-10, 11:57:09
    Hi,
    I have an MSI GT627, report:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in Sun 21/02/2010 at 14:50:33.70
    Mainboard:  MS-1651
    PCB Version:  Ver 1.000
    BIOS Version: A1651IMS.112
    BIOS Date:  9/17/2009
    EC-FW Version:  1651EMS1 Ver4.32, 06/19/2009
    I would like to have the northbridge options that are available with the 10P BIOS (early version). Those options that I want are the memory frequency and timings.
    Also I would like to be able to use setfsb to overclock, like with the barebones version bios (is this possible)?
    Cheers
    Done, check your e-mail

  • MOVED: Power Limit vBIOS mod for MSI GTX 970 Gaming 4G

    This topic has been moved to BETA & MOD BIOS Section.
    https://forum-en.msi.com/index.php?topic=184181.0

    Quote from: flobelix on 10-January-15, 23:58:57
    It is attached. After downloading the archive first uninstall the Nvidia driver (!) then simply decompress the archive and then execute the included batch file (185.bat) in Windows by double clicking or via command prompt (must be run as administrator).
    Ok thanks for replay any relese notes?

  • Request: Latest UEFI / GOP vBIOS for MSI R7870 Twin Frozr 2GD5/OC

    Hello there!
    I'm running Windows 8.1 Pro 64-bit and would like to upgrade to the latest UEFI / GOP vBIOS for my MSI R7870 Twin Frozr 2GD5/OC please.
    I ran GPU-Z and have posted my current vBIOS here:
    stoguild.info/pitcairn.zip
    Thank you in advance!

    No, that's not the S/N. If there's no other sticker that's bad. According to your provided vbios this gop one should be right:
    >>TV274MH.100<<
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0). Then unpack the previously provided archive and put the included file (TV274MH.100) on that stick. Rename TV274MH.100 to TV274MH.rom. Put the atiflash.exe also on the USB stick. Now boot from the stick. Type atiflash -p -f -noaper 0 TV274MH.rom [ENTER] and let it flash the vbios.

  • Bios mod for msi gx620 notebook

    Hello
     I can be one of the bios gx620 modify notebook?

    don't think that this can be fixed with bios update.
    Quote
    say, the map is not on top of the white list
    if there is such the machine should boot at lest but will hang at bios post screen with warning message,
    and will complain that not supported vga is installed

  • Requesting disassembly/assembly Guide For MSI GS60 Ghost Plese

    I would like to request a disassembly /assembly guide for MSI GS60 Ghost for GPU/CPU repaste. Thanks XD

    if you just want to upgrade RAM oder SSD you don't need to full disassemble
    here is how I did it

  • MOVED: K7N2 Delta-ILSR IDE Controller

    This topic has been moved to Retired motherboards.
    https://forum-en.msi.com/index.php?topic=122076.0

    Hey fredick..
    Quote
    you said...Please be a little more specific.It is hard to understand your post
    i told you im not a master geek...
    so  im not sure on all the tech geek terms..
    i tried to tell you best as i can to what happened..
    and what im trying to fix..
    its not a BURNER related problem..
    its a Hard Disk controllers/PCI IDE Controllers problem..
    like this example here...
    Quote
    the Primary IDE Channel controller, Secondary IDE Channel controller, and a brand name controller, e.g. Intel, SIS, VIA, etc. The brand name controller is what needs to be updated. Please visit their website to obtain these updates.
    like wheres the MSI or Nvidia one for Win98 OS...where do i get one..
    like the chip set driver thing..
    like the IDE controller thing..
    where you would have a PCI ide Controller thats for the NVIDIA® nForce2 Chipset
    like the one MSI/Nvidia has for a XP operating system...
    like it has the IDE In-the-box 2.70 thing thats for Xp systems
    wheres the One for Win98
    the hard drisk controller...
    that thing that is found here on a Win 98 system..
    Start/Settings/control panal/System/Device Manager/Harddisk Controllers/(its suposed to be here)
    and should be named something like NVIDIA Nforce2 Buss master controller
    or what ever they named it...
    but to answer your question..
    my burner is on its own IDE and the DVD burner and is SET to master
    Quote
    you asked..Do the disks have the same FAT..
    yes FAT32...windows 98..Fat32
    you asked...and have they had the same cable?
    yes they have the 80 wire cables the newer ones for ATA 66/100/133..
    i guess thats what you want to know...

  • "Legacy Mode" BIOS request for MSI R9 280X GAMING 6G

    "Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
    S/N: 602-V277-310B1407096530
    Installed BIOS: TV277MS.3A0
    Hi,
    I have the annoying problem with my new video card: a screen is periodically blinking in 2D. Probably that problem already solved in a newest BIOS?
    I have to use "Legacy" mode because of my PC does not start otherwise.
    Related hardware: MB: MSI P67A-GD65 B3 (BIOS 1.19), CPU: i7-2600K, Monitor: HP ZR2440w (DP connection).
    Thank you.

    here is .3A1
    TV277MS.3A1 legacy
    TV277MH.3A1 uefi
    flash guide:
    Quote
    Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (xxx.rar) and put the included file (TVxxxxx.zzz) on that stick.
    Rename TVxxxxx.zzz to zzz.rom.
    Put the atiflash.exe from: https://www.techpowerup.com/downloads/2306/atiflash-4-17/
    on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 zzz.rom [ENTER] and let it flash the vbios.

  • More than 4 IDE devices using the Raid controller on the MSI-6567 645E Max2-LRU ?

    Here is the specs page of the board
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=79
    I have a HD and a CD-ROM drive on the first IDE controller, and an HD and a CD-writer on he second IDE controller
    Since the specs say the board only supports 4 IDE devices I was wondering-
    1) Can I connect another HD to one of the onboard Raid controllers, and work with it in addition to all the other IDE devices currently plugged in, without RAID?
    i.e. CD-writer, CD-ROM, and 3 HD's working together ?
    2) Can I connect 2 more HD's, one to each onboard RAID controller and have them work in raid in addition to all existing IDE deviced?
    i.e. CD-writer, CD-ROM, 2 HD's and 2 more HD's in RAID format working together ?
    Thanks in advance..  

    But like I said, I do not intend to connect CD-ROMS to the RAID controllers, only HD's - the CD-ROM and CD-Writer are currently connected to the normal IDE controllers and I don't plan on changing that in any case
    My question was whether or not i can add more HD's to my current system by adding them to the RAID IDE's
    simply put, to be 100% clear my question is this -
    will the current configuration work:
    IDE 1 = CD-ROM + HD1
    IDE2 = CD-WRITER + HD2
    RAID IDE1 = HD3
    and will this one work:
    IDE 1 = CD-ROM + HD1
    IDE2 = CD-WRITER + HD2
    RAID IDE1 = HD3
    RAID IDE2 = HD4
    when HD3&4 work in RAID mode
    Thanks again for you help
    RE your suggestion - why not put a CD-ROM and an HD on the same IDE ? that way my HD's are connected to different IDE controllers for better performance

  • Re: Request: Fn/Cltr Swap for MSI GX 740

    I am also interested in a FN/CTRL swap for MSI GX740, MS-1727. Could I receive this mod too?
    Edit: Pic inc
    http://img259.imageshack.us/i/img0071pm.jpg/

    To your updated info:
    Quote from: torinogut on 08-October-10, 23:33:25
    http://img259.imageshack.us/i/img0071pm.jpg/
    The request can be proceed on donation https://forum-en.msi.com/index.php?topic=134259.0
    Once done, the request will be e-mailed to you [up to 24 hours max]
    Best Wishes,
    Svet

  • Why MSI DKA 790GX platinum BIOS 1.7 dun have EEP mode for DRAM setting

    hihi,
    may i know why MSI DKA 790GX platinum BIOS 1.7 dun have EEP mode for DRAM setting?
    cos i cant see EEP using CPUZ.

    Quote from: Fredrik on 22-May-09, 09:15:00
    I have no good answer, just a rule of thumb: After a BIOS updae, pull power cable out and clear CMOS.
    In this thread it says Kingston may not have EPP settings, but if it worked previously... Perhaps the memory controller didn't understand you had that memory to begin with? 
    Better ask: Is everything the same, before and after update? Why did you update?
    Quote:
    1.7 Update Date 2009-03-31
    Description - Update CPU module.
    - Update memory module.
    - Fixed SmartFan function cannot work properly after resume from S3.
    i update to v1.7 because when i first plug in the 1066Mhz RAM, it only show 800Mhz in bios, so i update to v1.7 as the update include "update memory module".
    anyway my system is fine, as i have run 8 hr of memtest.
    just want to know why there's no EPP option in v1.7
    p/s. I think i saw EPP option in v1.6 using the same RAM.

  • Request new BIOS for MSI R9 270 GAMING 2GB

    Hi there, I use W7SP1 with a Gigabyte GA-H87-HD3 mobo and the 13.12 drivers(14.4 suffer from very high OpenCL to Direct3D interop lag unfortunately, which is a showstopper with madVR) and I just bought this board with the exact same BIOS version number as on this link: techpowerup (.com)/vgabios/149707/msi-r9270-2048-131106.html
    It's fairly silent under load and I'm happy with that, but when idle the fans seem hardlocked to 1040 rpm
    Whatever fan percentage higher than 18% does increase the fan rpm speed, but anything lower still gives 1040 rpm.......what is the point to cool the GPU down to 28°C when its TJmax is 95°C? I would like to drop the fans speed when idle to maybe 700/800rpm and get the GPU to reach 40°C or so?
    I run a SSD with a 350rpm oversized CPU fan, a passive PSU and several oversized case fans that also run very slowly, those 1040rpm are killing me....I used to own a VTX3D Vchamp HD7850 that allowed me to make my own custom fan speed curve in Afterburner: dead-silent when idle and slowly ramped up under load, perfect
    Of course its cooler was a joke compared to your TF4 but you can see that Asus are now releasing graphic cards that are semi-passive with their fans shutting off until the GPU reaches 65°C, it makes no sense to me to use the TF4 at 1040 rpm when idle(and even more so on the 70W TDP GTX750Ti).
    Long story short, I would really appreciate an unlocked BIOS please so I could build my own fan speed curve in Afterburner as I used to. I do plan on buying the future Maxwell's(a twice faster 750Ti would be awesome), I dearly hope that you will reevaluate your TF4 fan speed curves because otherwise I would more than likely buy a semi-passive Asus next time. Talk about wasted potential
    I guess you hardlocked it so dumb ppl wouldn't set the fans to a fixed very low speed and toast the board, but posting an unlocked BIOS on your forum that's aimed at power users is just showing that you care. I know EVGA did post this kind of BIOS updates recently and you polished the TF4 cooler to such extents that it's truly a crying shame to be stuck at 1040 rpm and 28°C when idle
    There is no question that TF4 is extremely effective under load with a 150W TDP GPU, but you can see that the 270X Powercolor board is quieter when idle in this comparison: tomshardware (.com)/reviews/radeon-r9-270-benchmark-review,3769-5.html
    Hope you can help, I will gladly spread the word on HTPC forums because this board is close to perfection when using madVR.
    Thank you very much in advance

    OK thanks for the reply, but the 18% cap seems BIOS based...I have a hard time believing that they can't run any lower than 1040 rpm
    Are you a mod? Working for MSI? This looks like a wild guess more than an official reply if you don't mind me saying.
    For the record, that VTX3D board I mentioned in my previous PM was able to go down to 1%.
    I would fix it myself but there are no BIOS editors for the R9 serie apparently....MSI simply capped the lowest PWM value: tpucdn dot com/rbe/RBE_Fan.png
    Whatever way their speed's being throttled(PWM or voltage), they must be able to go slower than that. I could provide you links but EVGA did make clear that they capped the lowest speed of the fans on some of their boards so dumb users wouldn't fry them but they were entirely able to release unlocked BIOS binaries.
    At this point I could either return it or unplug its fans and slap a 600rpm 140mm fan onto the board using zip ties.......it's just amazing that MSI managed to ultimately fail on such a detail. All the work put into the TF4 cooler goes down the drain
    flobelix seems able to help, I hope he'll chime in: forum-en.msi dot com/index.php?topic=180521
    Quote
    Fan controller actually can control the fans, and the GPU gets less hot

  • Request: BIOS/EC mod for EX300

    Hi there,
    I have the 1.06 Bios/EC versions installed on my EX300.  I am interested in finding a mod which will allow swapping the Fn/Ctrl buttons.
    Thanks,
    dtan

    Quote from: roelm12001 on 12-March-11, 20:21:07
    sir please send me the BIOS/EC mod for EX300. thanks in advance!
    Hello,
    The request can be proceed on donation https://forum-en.msi.com/index.php?topic=134259.0
    Once done, the request will be e-mailed to you [up to 24 hours max]
    Best Wishes,
    Svet

  • My iphone 4 went into recovery mode for some reason and it is unable to be restored. any ideas how to fix this?

    my iphone went into recovery mode for some reason and is unable to be restored. it wont turn on and when plugged into a charger it shows a usb and itunes symbol. so i plugged it into my mac and connected to itunes then itunes said it has detected a phone in recovery mode and needs to be restored. so it goes through the restoration process for a couple minutes or so then stops and says itunes is unable to restore because an unknown error occurred (2001) or (2006) and other times i try it says its unable to restore because itunes cant detect the device... any ideas how to fix this?

    Errors 2000-2009 (from Apple support): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604. If the issue persists, it may be related to conflicting security software.
    2001: Use up to date software. Make sure your device is in DFU Mode: http://www.iclarified.com/entry/index.php?enid=1034
    2006: Use a different USB cable. Possibly the one that came with your iPhone.

Maybe you are looking for