Request: AHCI Support for Samsung 830 SSD on gx660r

Hi Svet,
i have bought a Samsung 830 SSD for my gx660r notebook, but i realized that it is not recognized in the BIOS in AHCI mode.
The MSIHQ Flashing Tool says the following about my BIOS:
Mainboard: MS-16F1
PCB Version: To be filled by O.E.M.
BIOS Version: E16F1IMS VER3.0J
BIOS Date: 28.03.2011
EC-FW Version:
Could you provide me with a BIOS that works with my Samsung SSD?
I already donated some bucks.
And can you give me a hint how i can rescue my system in case the update fails?
As far as i know, my notebook does not have m-flash (at least i've seen no reference to m-flash), is there another way to restore the backup bios in case something goes wrong?
BTW: Im using the latest version of the flashing tool, but it does not offer the mode 2 (where i can point to a single bios file). Can you provide the modded bios as a zip/rar file so i can use it with mode1?
Many thanks,
Sascha

Quote
Hi Svet,
i have bought a Samsung 830 SSD for my gx660r notebook, but i realized that it is not recognized in the BIOS in AHCI mode.
The MSIHQ Flashing Tool says the following about my BIOS:
Mainboard: MS-16F1
PCB Version: To be filled by O.E.M.
BIOS Version: E16F1IMS VER3.0J
BIOS Date: 28.03.2011
EC-FW Version:
Could you provide me with a BIOS that works with my Samsung SSD?
I already donated some bucks.
Yep, check PM
Quote
And can you give me a hint how i can rescue my system in case the update fails?
As far as i know, my notebook does not have m-flash (at least i've seen no reference to m-flash), is there another way to restore the backup bios in case something goes wrong?
Nope, in a case of bad flash there is no recovery.
Else if everything goes fine, you can restore original BIOS if you want to do this for some reason.
Quote
BTW: Im using the latest version of the flashing tool, but it does not offer the mode 2 (where i can point to a single bios file).
To prevent using the wrong flasher[which can kill the notebook],
Tool automatically Disable Mode2 when notebook is detected.
Quote
Can you provide the modded bios as a zip/rar file so i can use it with mode1?
Yes, ofc. Check PM

Similar Messages

MOVED: haswell board support for samsung 830

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=171306.0

the Z87 boards have problems with drives using older controllers (especially Sandforce ones) as a result they are highly problematic to try one!
the problem is on Intels side as the controller for the SATA III (6GBp/s) is embedded in the CPU and intel have made it so it can't use them properly so there is very little that any maker can do to fix it apart from make new boards with a ADD-ON SATA controller that can see those drives but it would cause a huge performance hit as the aftermarket controllers are very slow and would bottleneck the drives!
unless MSI or another Board Manufacturer can fix the problem somehow then there is nothing that can be done!

X220 Won't boot Samsung 830 SSD

I have a Lenovo X220 laptop with a 320GB Hitachi hard drive,
and it works just fine. But I decided I needed more speed,
so I bought a Samsung 830 SSD for it. I cloned the entire
X220 hard drive to the SSD (using a USB external case and
HDClone4), and everything looks fine on the SSD (when viewed
with Partition Wizard on another machine while the SSD is still
in the USB enclosure). But the SSD will not boot in the X220!
It starts, and in fact it gets as far as saying "Starting Windows",
and then moving the four color dots (of Windows 7) around a
little bit, and then it momentarily flashes the dreaded
white-on-blue screen (so fast you cannot tell what it says),
and then it enters the recovery-menu screen. Bummer!
I called Lenovo tech support and they essentially told me to
GET LOST because they "don't support" me installing an SSD
(even though the X220 User's Guide shows exactly that).
I've used HDClone4 several times in the past (to clone hard
drives for my stable of Lenovo T60 laptops), and it seems to
always work just fine. So why is this not working for my X220
and Samsung 830? Note that, while I don't expect Lenovo to
certify compatibility with every flea-bit SSD on the market,
this Samsung 830 is highly regarded by many well-respected
reviewers (Tom's Hardware, my favorite, in particular).
Has anyone here heard this song before? Is there something
peculiar about the X220 and/or the Samsung 830? I'd sure
appreciate any helpful advice. Thanks.
Solved!
Go to Solution.

Did you uninstall (+ reboot) Lenovo Rapid Boot before cloning the HDD drive ?

Install a samsung 830 SSD in my macbook pro 2011.

I am trying to install a samsung 830 SSD in my brand new Macbook pro. Whenever I install it and boot the mac I get three beeps.
When I put the old HD back in it workes fine. The SSD workes fine on a windows machine.
I have seen other macbooks with this SSD work just fine.
What could be the problem?

The samsung SSD comes with a very handy USB cable so I hooked it up to my Imac and repartitioned the disk.
The SSD works without problems on the mac too apparently.
Unfortunately the Macbook still gives me the three beeps when I put the SSD back in.
This is quite frustrating, both the SSD and the Mac are brand new.
If I cant solve it myself which do I send back? The Macbook works fine with the original disk, the SSD works fine in any other PC.
I will try to clone my existing OSX to the SSD and let you know if it worked.
Even if that worked I still would not be confident everything is fine.
The last thing I want is to find out my Macbook is malfunctioning 2 days after the warranty is expired. (wouldnt be the first time )
Thanks for the help so far!

Boot up time with Samsung 830 SSD? - MacBook Pro 13" 2.9GHz Mid2012

Hey everyone,
Just got my first mac ever! Snagged a pretty nice deal on a MacBook Pro 2.9 GHz 13" Mid2012 model by getting it refurbished.
I immediately cloned my hard drive using CCC and installed a Samsung 830 SSD (256 GB). I believe I did install it correctly as using black magic speed test I put up some pretty good numbers --> 400 MB/s Write and 490 MB/s Read.
However, the boot up time seems a bit slow for a out of box MacBook Pro considering I upgraded the hard drive.
I was clocking in around 40 seconds... Is that abnormally slow?
I know its kind of silly looking timing the start up of your computer... I just expected faster, and this is my first hard drive installation... I hope I didn't mess up!
Thanks for your help in advance,
Weston

A bit simplifying :
there are two parts in boot process - one-before spinning thing, other - spinning thing to desktop.
First part is hardware inits, you can not speed it up. It is for sure longer for your MBP than for her - its normal, more hardware and it is more sophisticated so longer init.
Second part depends on HD (SSD) speed.
Say so - I have M4 SSD and second part is 1 to 2 spins until login window. Should be more or less same for you.
If it is not so - probably something is not good with filesystem and some config files, most probably due to cloning instead of install. Reboot from recovery, repair drive (first - drive as a whole, second - boot partition), then reboot permissions. reboot two times as normal. see what'll happen with timing.

Kernel panic - trying to install a Samsung 830 ssd

Hi everybody,
please forgive me for my poor English.
I'm trying to install a Samsung 830 ssd with an optibay on my MBP early 2011. The ssd works fine, and I get a Sata 3 speed connection.
The first problem I found was that Disk Utility wasn't able to initialize it! "Posix error: i/o error" or "unable to locate memory".
So I inizitialized it with MacDrive on windows xp on another pc.
Here comes the second problem: when I boot with my ssd on the optibay there's a kernel panic, but when I boot with the superdrive everything is fine. So what can I do? Thanks for your help!
These are the details of the kernel panic
Interval Since Last Panic Report: 8217623 sec
Panics Since Last Report: 1
Anonymous UUID: 08F2ECFA-3B01-4EE9-8C10-7AAA06C56855
Mon Jan 1 01:03:51 2001
panic(cpu 4 caller 0xffffff7f80de1874): "AppleAHCI: slot (0) reused, newFIS = 0xaaef8027 : 0x00000000 : 0x00000000 : 0x00000000, currentFIS = 0x002f8027 : 0x00000010 : 0x00000000 : 0x00000001, PxCl = 0x00000001, PxSact = 0x00000000\n"@/SourceCache/AppleAHCI/AppleAHCI-220.0.2/AppleAHCIPort.cpp:3831
Backtrace (CPU 4), Frame : Return Address
0xffffff80b1293b10 : 0xffffff8000204d15
0xffffff80b1293c10 : 0xffffff7f80de1874
0xffffff80b1293c90 : 0xffffff800053c225
0xffffff80b1293d00 : 0xffffff7f80dded27
0xffffff80b1293da0 : 0xffffff7f80dd4e8d
0xffffff80b1293dd0 : 0xffffff7f80dd529a
0xffffff80b1293e50 : 0xffffff7f8142325d
0xffffff80b1293e90 : 0xffffff7f814238e9
0xffffff80b1293eb0 : 0xffffff7f8142348c
0xffffff80b1293ed0 : 0xffffff7f814268f0
0xffffff80b1293f60 : 0xffffff8000285b66
0xffffff80b1293fa0 : 0xffffff80002c8527
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOAHCIBlockStorage(1.6.6)@0xffffff7f8141e000->0xffffff7f81432fff
dependency: com.apple.iokit.IOAHCIFamily(2.0.7)@0xffffff7f80dd3000
dependency: com.apple.iokit.IOStorageFamily(1.6.3)@0xffffff7f80e7a000
com.apple.driver.AppleAHCIPort(2.2.0)@0xffffff7f80dda000->0xffffff7f80df1fff
dependency: com.apple.iokit.IOAHCIFamily(2.0.7)@0xffffff7f80dd3000
dependency: com.apple.iokit.IOPCIFamily(2.6.8)@0xffffff7f80800000
com.apple.iokit.IOAHCIFamily(2.0.7)@0xffffff7f80dd3000->0xffffff7f80dd9fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 22030057050
unloaded kexts:
com.parallels.kext.prl_usb_connect 7.0 15094.749908 (addr 0xffffff7f8167e000, size 0x28672) - last unloaded 20650072172
loaded kexts:
com.parallels.kext.prl_hid_hook 7.0 15094.749908 - last loaded 21248638225
com.parallels.kext.prl_hypervisor 7.0 15094.749908
com.parallels.kext.prl_usb_connect 7.0 15094.749908
com.paceap.kext.pacesupport.snowleopard 5.7.2
com.hzsystems.terminus.driver 4
com.waves.driver.soundgrid 2.0.0
com.digidesign.iokit.DigiDal 8.0.5f2
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.8f3
com.apple.driver.AppleMikeyDriver 2.0.8f3
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.kext.ATIFramebuffer 6.4.2
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleIntelHDGraphics 6.4.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleMuxControl 3.0.17
com.apple.driver.AppleBacklight 170.0.48
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.ATIRadeonX3000 6.4.2
com.apple.driver.AppleIntelSNBGraphicsFB 6.4.2
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBTCKeyEventDriver 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleIRController 303.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.6
com.apple.driver.AppleUSBHub 4.2.5
com.apple.driver.AppleFWOHCI 4.7.7
com.apple.driver.AirPort.Brcm4331 433.11.5
com.apple.driver.AppleSDXC 1.0.4
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleUSBEHCI 4.2.6
com.apple.driver.AppleUSBUHCI 4.2.5
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.9
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.8f3
com.apple.driver.DspFuncLib 2.0.8f3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.4
com.apple.driver.AppleHDAController 2.0.8f3
com.apple.iokit.IOHDAFamily 2.0.8f3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.17
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.17
com.apple.driver.AppleBacklightExpert 1.0.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleThunderboltEDMSink 1.1.3
com.apple.driver.AppleThunderboltEDMSource 1.1.3
com.apple.driver.AppleThunderboltDPOutAdapter 1.5.9
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.kext.ATI6000Controller 6.4.2
com.apple.kext.ATISupport 6.4.2
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.AppleThunderboltDPInAdapter 1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.7
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.2.6
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.3.0

There's an update: I uninstalled Parallels. Then I connected the ssd to my mac with a sata usb cable, and everything worked fine, I initialized it and I tried to copy some files and it was ok..
So I put it into my optibay and booted Osx, this time no Kernel panic!
But now there's a new problem: when I try to copy files or create a folder on the ssd I got error -50 can't complete the operation.. Both with finder and muCommander.
So what shuold I have to do now?
I'm getting a little upset..

Email profile support for Samsung Android (KNOX) devices in integrated environment of SCCM 2012 R2 and Microsoft Intune

Hi,
I could see that lot of TechNet articles are being updated recently with the information on Samsung Knox.
Tried to check the email profile configurations in the SCCM console, could not find Android platform in the supported platforms.
I could see this option available when I login to the admin portal of Intune. Can any one confirm if the extension for enabling email profile support for Samsung Kiosk devices id released or planned to be released.
Regards
Leela

Configuring email profiles on Andriod devices is not yet supported via ConfigMgr integrated with Intune, see also:
https://technet.microsoft.com/en-us/library/dn554226.aspx
It probably will be in the future, but there are no dates available yet.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Why is the SSD on 2011 Macbook Air much slower then 2010 Macbook Pro with Samsung 830 SSD (less then half the speed) ?

Why is a laptop designed from ground up to use flash slower then a older laptop with a upgraded SSD from a 3rd party?
My old MBP is more then 2x the speed (read/write) with a SSD upgrade (Samsung 830) then my Air.
Any fixes or mods to boost the flash speed of the Air?

We would like you to show us how to do that.......Especially when the Samsung 830 will not fit the Air.....Please don't say duct tape....
Ok, scratch that idea. Let me think for a moment,,,em,,,em. OK I got it. Sell both units and buy a mid Macbook Air 2012 version.
(d-mn I'm good)
__________ All Hail The King _________

Need help installing Samsung 830 SSD on MacBook Pro 13"

Hello everyone, my MacBook Pro recently crashed a couple weeks ago and I tried to get it working but no luck! So I figured it was the perfect time to make an investment in SSD and check out how it is.
So I bought a Samsung 830 SSSD 128gb. I installed the hard drive and inserted the Mac OS X disc and booted up my MBP. Once I went through the installation, it asked me where I would like to install the OS on but my SSD didn't appear. Can someone please help me? I am not too savvy with computers.
As of now, I only have access to my PC so someone please help me :( Thanks in advance! :)
-David

OK, you have an original installation disc (usually a gray disc that came with your Mac)?
Boot from the Install disc. You should have the option of either selecting Disk Utility from the main menu or from a "Utilities" menu at the top.
Open Disk Utility.
You should see a disk with a strange name. Select it and choose "Erase" with the Format as "Mac OS Extended (Journaled)" and a Name such as "Macintosh HD" (or whatever you'd like to name it. Just select erase - no need for a secure erase or anything.
Once you've formatted the SSD you should be able to quit Disk Utility and continue installing the system on the newly formatted drive.
Give it a shot - call back with any problems as I'll be up all night...
Clinton

W520 and Samsung 830 SSD

Hello:
After several issues with a Mushkin Chronos DX 480GB I finally returned it.
Now I'm thinking in buying a Samsung 830 512GB SSD and it a 7mm disk, my question is if it's necessary to buy the notebook kit or not of this disk.
Without notebook kit:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147165
With notebook kit
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147139
Thanks in advance.
Regards.

The "spacer" is needed in the W520 if you install it in the primary drive bay. The rubber rails are sized for the 9.5mm drive if you initially received the 500gb HDD (the 320gb HDD is 7mm so no spacer is required). The Samsung SSD is first mounted on the drive carrier, then the spacer is placed on top of the SSD, then the rubber rails are placed on either side. The cobination fits snugly in the drive bay.
I recommend the Newmodeus HDD caddy if you are going to use the former HDD in the UltraBay. That caddy does not require the carrier and comes with all needed screws to secure the drive.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Feature request: keymapping support for basic GVIM style editing

Maybe this isn't the right forum, but it seems to be the only mechanism for providing
feedback. I'm getting used to the workshop environment and like a lot of the
features it provides. Tab completion of methods, parameter info, import automation
are all very nice modern features. I come from a Unix background and cut my teeth
coding on VI and GVIM off the command prompt. A feature that would really sell
me on an IDE and many that I know, would be some support for VI keymappings.
Once you are used to an editor that doesn't make you run to the mouse or the arrow
keys every time you need to move the cursor, anything less feels slow and taxing.
If basic support for "VI like" operation could be added, I think you'd find more
people like myself willing to spend time in the IDE for its other features. GVIM
offers a rich set of features, of which about 10 would suffice for most of what
I do.
1. insert/navigate modes so you can use ijkl instead of arrow keys.
2. support for '/' as a search prompt as well as 'n' and 'N' to jump between
findings.
3. support for regular expressions on the search line
4. support for regular expressions via a VI style substitute command {range}:s/search/replace/
5. :w for write or "save"
6. :e to open a file
7. 'A' to jump to the end of a line and enter insert mode.
8. 'D' to delete beyond the cursor to the end of the line.
9. :line-number to jump to a line number.
10. 'x' to delete a character and 2x for two etc...
Okay, my list goes beyond ten if I continue, but if I could perform basic editing
without having to go to the arrows or the mouse or a separate window of gvim,
I'd be a happy customer.
Thanks,
Morgan

Morgan,
The engg team has confirmed that its a goal to support this in the next
version.
Thanks for the suggestion. Keep them coming!
-Anurag
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Hello Morgan,
I have forwarded the information to our engineering team for evaluation.
Regards,
Raj Alagumalai
WebLogic Workshop Support
PS: Wasn't sure if you had come across the kit available at
http://dev2dev.bea.com/products/wlworkshop81/workshop_ext.jsp
"Morgan Hall" <[email protected]> wrote in message
news:[email protected]...
Worth noting, I just found viPlugin for Eclipse on Sourceforge.net.
From
the looks
of the documentation, it will act as a layer on top of any JDT editor oran editor
that extends ITextEditor, which might be an Eclipse class. Hope thathelps your
development team.
"Raj Alagumalai" <[email protected]> wrote:
Thanks for the feedback Morgan. I will make sure that this information
is
forwarded to our engineering team. We love to hear what our customers
feel
about the product.
Regards,
Raj Alagumalai
WebLogic Workshop Support
"Morgan Hall" <[email protected]> wrote in message
news:[email protected]...
Maybe this isn't the right forum, but it seems to be the only
mechanism
for providing
feedback. I'm getting used to the workshop environment and like alot of
the
features it provides. Tab completion of methods, parameter info,
import
automation
are all very nice modern features. I come from a Unix background andcut
my teeth
coding on VI and GVIM off the command prompt. A feature that wouldreally
sell
me on an IDE and many that I know, would be some support for VIkeymappings.
Once you are used to an editor that doesn't make you run to the mouseor
the arrow
keys every time you need to move the cursor, anything less feels slowand
taxing.
If basic support for "VI like" operation could be added, I think
you'd
find more
people like myself willing to spend time in the IDE for its otherfeatures. GVIM
offers a rich set of features, of which about 10 would suffice formost of
what
I do.
1. insert/navigate modes so you can use ijkl instead of arrow keys.
2. support for '/' as a search prompt as well as 'n' and 'N' to jumpbetween
findings.
3. support for regular expressions on the search line
4. support for regular expressions via a VI style substitute command{range}:s/search/replace/
5. :w for write or "save"
6. :e to open a file
7. 'A' to jump to the end of a line and enter insert mode.
8. 'D' to delete beyond the cursor to the end of the line.
9. :line-number to jump to a line number.
10. 'x' to delete a character and 2x for two etc...
Okay, my list goes beyond ten if I continue, but if I could performbasic
editing
without having to go to the arrows or the mouse or a separate windowof
gvim,
I'd be a happy customer.
Thanks,
Morgan

[Request] Full support for AVRCP

I just bought a 3GS and it's my first iPhone, i love it, but it does have it's limitations that many phones from the past 5+ years have.
Full support for AVRCP in 3.1 please!. I can play/pause but can't skip/prev and it's annoying since i got a S305 headset and i ride a bike and listen to music on the way to work and i want to skip a song but i can't since it isn't supported yet.

Let Apple know directly here: http://www.apple.com/feedback/iphone.html

Enh. request: shortcuts support for button labels

Hi Apex team,
it would be nice to enhance shortcuts support for button labels in the next release. There are a lot of standard buttons like 'Cancel', 'Apply Changes', 'Delete', etc. that require translation for each page they appear in global applications.
Thanks.

Hi Arno,
I had a similar issue with trying to create a Nav bar with dynamic content. My solution was to leave all the standard buttons in place and to use setVisible(x) to make them appear or not as required.
BTW have you noticed that rollover behaviour isn't consistant ie works for FIRST/LAST etc but not for FIND/QUERY.
Regards
Andy

Requesting AHCI support bios for samsung 830 on gx740

Hi Svet,
heres my details
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in 28/12/2012 at 11:47:15.46
Mainboard: MS-1727
PCB Version: REV:1.0
BIOS Version: E1727IMS.10C
BIOS Date: 10/12/2010
EC-FW Version: 1727EMS1 Ver4.06, 05/28/2010
ive donated,also could u please make it so the fn and ctrl keys are swapped as well if that is possible?
cheers svet ur marvelous

Hello,
Okey, will work over it and sent you back to you when its done. [will take some time]
Quote
ive donated,also could u please make it so the fn and ctrl keys are swapped as well if that is possible?
yep

LR 3 support for Samsung TL350 (WB2000)?

Hi all,
does the LR3 update that now supports the RAW files of the Samsung TL500 (EX1) also support the RAW files of the Samsung TL350 (WB2000)? If not, I would be grateful if this camera could be added to the list in another update! Thanks to the Adobe team in advance!
Cheers,
jazzy

jazzcrab wrote:
Hi all,
does the LR3 update that now supports the RAW files of the Samsung TL500 (EX1) also support the RAW files of the Samsung TL350 (WB2000)? If not, I would be grateful if this camera could be added to the list in another update! Thanks to the Adobe team in advance!
Cheers,
jazzy
Hi Jazzy!
Have the same problem!
How do you deal with it now?
Is there a possibility yet to use .srw from the wb2000?
(instead of the samsung software)
If you have time...
please write your request (that adobe puts those cams into "bridge" or "lightroom") into the request area of Bridge.
http://forums.adobe.com/community/bridge/bridge_feature_requests
We have to make preasure to them!
thx, lukas

Request: AHCI Support for Samsung 830 SSD on gx660r

Similar Messages

Maybe you are looking for