Request and request set as menu entry

Hello:
Does somebody know how to define a request as a menu item? I want to execute automatically a request when a user cliks on that menu entry.
Can this be done also with request set's?
Thanks in advance

1. You will need to define a Request Group with your Concurrent Program(s)
2. Define a Function with the following syntax REQUEST_GROUP_CODE="<Your Request Group defined in step 1>" REQUEST_GROUP_APPL_SHORT_NAME="<Short Name of the Application>" Optionally define a title for the submit request window TITLE="AR:AR_CMGT_SRS_TITLE"

Similar Messages

  • Monitoring Request and Request response time

    Hi All,
    I want to monitor request response time of static and dynanic content like html ,jsp from webserver to web application server and also want to monitor status of webserver startup and shutdown.In whole i have to develop a custom plugin for web application server.Please help me out regarding this as iam new to java.
    Regards,
    Prashant

    It doesn't do everything you are looking for, but then in some ways it does more such as monitor performance of jsp, html, sql, and even tracks calls to log4j.
    http://www.jamonapi.com
    Message was edited by:
    ssouza

  • SharePoint 2013 - Site Settings - Users and permissions - "Access Request and invitations" link missing

    I am site collection administrator and have configured the outgoing email in Central administration but "Access Request and invitations" link  is missing, pl advice any additional configurations for this link to show up
    I was though able to configure access requests by going to Site Settings->Users and permission and on the ribbon selected "Access Request Settings"
    What is the difference in either of the approaches?
    Thanks
    Abhishek

    Hi there,
    I noticed this post, and didnt really find an appropriate solution to your issue. I noticed the same issue when dealing with Access Requests. First of all to make sure that the Request feature is enabled, you need to access 
    Site Settings -> Site Permissions -> Access Request Settings -> Make sure the
    'Allow access requests' option is enabled.
    The Allow access screen just allows you to enable the feature and also to specify a email address that notifications are sent to. Whereas the 'Access Requests and Invitations' section provides a screen to manage Access Requests and request history.
    I noticed then that the Access Requests and Invitations link under 'User and Permissions' didnt actually appear until someone actually requests to join the site. It seems that this is needed to display the screen. Once actioned once, the option stays there.
    Hope it helps

  • How do I sort alphabetically xfce menu entries?

    Hi, all.
    Just finishing an install and want my xfce4 menu entries to be sorted automatically and updated if I add an application.  I've seen this documented somewhere, but can't find it, now.
    Does anyone know how to sort the menu?
    Cheers,
    Chris.

    please see the xfce4 wiki. it's a little complicated

  • When I open a raw file (NEF Nikon 7100)  and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

    when I open a raw file (NEF Nikon 7100)  and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

    Oh, dear.
    If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
    OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
    I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
    PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

  • I bought elements 13 and downloaded it , but when asked to sign into my adobe account as requested at initial set up of elements 13 , I know my correct password etc and i have a good internet connection But nothing happens even if i wait an hour or so. An

    i bought elements 13 and downloaded it , but when asked to sign into my adobe account as requested at initial set up of elements 13 , I know my correct password etc and i have a good internet connection But nothing happens even if i wait an hour or so. Any help would be appreciated.

    Hi Michael,
    Thanks for posting on the Adobe forums.
    Please follow these steps :
    Go to following location:
    for Win
    C:\Program Files (x86)\Common Files\Adobe
    C:\Users\username\AppData\Local\Adobe
    for MAC
    Finder> Go > Go to Folder
    \Library\Applicaiton Support\Adobe
    ~\Library\Applicaiton Support\Adobe
    Locate folder OOBE and rename it OOBE.old
    Download and install�
    Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
    Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager
    After the installation
    Try to Open Adobe Application Manager / Creative Cloud App.
    Log in that with Adobe ID and Password.
    If it does not work first try couple of times more.
    Let me know if this resolves the issue.
    Regards,
    Sandeep

  • My iPhone 4 is running ios 7.0.4. I have a slightly eccentric back story to all of this; but basically i set a secondary entry passcode on my phone and i have forgotten the secondary passcode; it appears as though i no longer have the opportunity to enter

    my iPhone 4 is running ios 7.0.4. I have a slightly eccentric back story to all of this; but basically i set a secondary entry passcode on my phone and i have forgotten the secondary passcode; it appears as though i no longer have the opportunity to enter the code after too many failed attempts -- "iphone is disabled, connect to itunes." i have connected to itunes on itunes on both 11.1 and 11.3 versions (my computer says 11.1 is the minimum requirement for my phone to sync) and attempted to restore my phone; THE RESULTING MESSAGE: "The iPhone 'iPhone' could not be restored. This device isn't eligible for the requested build." HOW THE HECK DO I GAIN ENTRY TO MY PHONE AGAIN AND GET SOME USE OUT OF IT. IT DID COST $$$ TO BUY. PLZ HELP!

    Hey there Jachin W.,
    It sounds like you are unable to connect to your home Wi-Fi suddenly on 2 different iOS devices. I would be interested to know if the affected phones are able to connect to a different Wi-Fi connection, but barring that I would use the following article to help troubleshoot the devices and the Wi-Fi connection:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section from toward the bottom if needed:
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Transport request to be created while adding entries in table

    Hi Experts
    I am using SAP ECC6 version.
    I want to unable transport request when user adds/changes entries from a table.
    I have a maintenance generator created with Standard recording routine. Delivery class is 'A'.
    I have tried all delivery class options staring from'C' to 'W'.
    But nothing is working.
    Also in sm30 if i select entries and try Transport, the menu option is also disabled.
    If anybody has done this please let me know.
    Thanks in Advance
    Meghana

    Hi,
    You can do it with transation SCC4.
    There you can check the radio button Changes without automatic recording.
    But for this u may require BASIS authorisation. Please contact them.
    Regards,
    Renjith Michael.

  • On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

    On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do?  Please don't tell me I have to buy a new Mac to be up to date.

    On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes &amp; App Stores and if necessary sign out/in and then enable iTM.

  • SRVR(Service Request) and SRVO(Service Order) are not appearing in IC_Agent

    Dear friends,
    We are planning to implement Service Requests and Service Orders in CRM 7.0 Interaction Center
    The Service Transactions(Service Order/Service Request) are available in 'Service Professional' business role but not available in 'IC_AGENT' role.
    The things i have observed
    1. Without the channel the Transaction Type was not appearing in SAP GUI (CRMD_ORDER)
    2. Even after maintaining the Channels the BUS2000223 (Service Request) did not appear in CRMD_ORDER but the SRVO- Service Order transaction type appeared.(BUS2000116 Service Process)
    3. Have maintained the SRVO and SRVR transaction types as dependent transaction types in the 'Business Transaction Profile'; still when clieck on the Service Request or Service Order create I am getting the below error
    'No transaction type is available for creating a transaction'
    Below is the diagnosis
    Diagnosis
    No transaction type is available when creating a transaction. This can be due to the following reasons:
    No transaction type is available according to Customizing
    The user has no authorization for the transaction type
    System Response
    It is not possible to create the transaction.
    Procedure
    Make sure that:
    The transaction type is set up in Customizing
    The user has authorization for the transaction type
    Can you please guide me where the actual issue is
    Regards
    Raj

    Hi Raj,
    As per your quarries and requirement please go through the link, it will help you in understandable way
    http://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C35_CRM701_BB_ConfigGuide_EN_XX.doc
    Please reward points,
    Cheers,
    Sunil

  • Do you have an option for block all incoming message and request EXCEPTED messages from my contacts?

    Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft  Dear all who can really help,  Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time?  Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only"  I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts.  I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS).  And this is the only way to contact with them, because they could use Skype only in overseas.  BUT I don't need new friend from other unknow Skype member.   I keep blocked all unknow spammers in every day.  However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly.  I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever?  I appreciate if you would improve the privacy protection. Thank you very very very much. 

    Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
    No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
    What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
    If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
    Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
    thxs!
    cheers
    rOot

  • Access Denied Error while accessing "Site Settings Access requests and invitations"

    Hi,
    I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint  2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
    site collection account. So, what permission I have to give my regular account to access this page?
    Thanks, Pal

    Hello,
    Have you recently changed the Owners group of the site collection or removed the user from the original owners group? 
    The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created.  If this "regular account" is not part of that owners
    group, the user will receive access denied.  Site Collection Admins always have permissions for the Access Request List.
    A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us.  By giving the correct group or user the permissions to this list, the users will not receive
    the Access Denied issue anymore.  
    Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
    was.  Below are additional steps to restore full functionality.
    1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
    is set correctly.  (There is a group selected)
    2) Add user to that Owners Group.  (Issue may be resolved at this step if the site collection Owners
    Group was never changed, if not continue to next step.)
    3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
    group as Full control on Access Request list Permissions.
    Let me know how this works out for you.
    - Shpendi Jashari

  • Difference between customizing request and workbench request?

    Hi ,
    What is the difference between customizing request and workbench request?
    please reply.........

    HI,
    <b>Workbench Requests</b>
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    <b>Customizing requests</b>
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    pl reward if it helps.
    Thanks
    Sadhu Kishore

  • Every time my IMAC is unused for a period, then goes to sleep mode, it loses it's wireless connection and when I wake it up, it DOES NOT automatically reconnect. I have to go to systme preferences network and request that it reconnect.

    My iMac is set up wireless.  Everytime it's allowed to go in sleep mode, it loses wireless connectivity.  Then, when I wake it up,  I must go to System preferences,  Network,  and request it to reconnect to my home wireless network.   It always does this successfully, but it's quite annoying that it seems unable to achieve this on it's own.  My iPad 2 and kindle can do this,  why not my iMac?

    This appears to be a known issue, there are a couple of things both of you should do, first file a bug report in www.apple.com/feedback.
    The next thing is more a work around than a fix. Instead of putting your computer to sleep just put the display to sleep. You will find this in System Preferences - Energy Saver. Set the computer sleep to Never and then set the display sleep to what ever time you prefer.

  • EDI - 753Routing Request and 754 Routing Instructions transactions- what SAP ECC6 EDI output type, msg type, msg code, basis idoc is best practice to generate the idoc?

    One of our Trading Partner wishes to implement the 753 Routing Request and 754 Routing Instructions.  Can anyone give me best practice answer the following Questions?  We are on SAP ECC6 R3
    What Application? i.e. V2, V7?
    What output condition to use?  i..e. LALE, LAT2, SEDI????
    What Message type?  i.e SHPADV?
    What Basic Idoc Type? i.e SHPMNT05?
    What Message Code?  i.e. SHPM?
    What Process Code?  i.e. SHPM??
    What Function Module? i.e. IDOC_OUTPUT_SHPMNT??
    Does the SAP Transpotation Module have to be configured for this to be implemented?
    Your comments are greatly appreciated, we have until Nov 1 to be compliant?

    Good Morning,
    While I did not get any responses from my question, yes, I was able to determine what needed to be configured.   I hope the below will help you: This is for SAP ECC6
    The output application for the 753 Routing Request is "V7"
    The output type is "SEDI"
    Transmission medium is "6"
    The Basic Idoc type is "Shipmnt05"
    when setting up your Partner Profile (WE20) add:Message Partner Role "SP" with Message type "SHPADV', Message coed "753", Basic Type "SHPMNT05", Message Control add Application "V7", Message type "SEDI", Process Code "SHPM".
    also http://scn.sap.com/thread/698368 pages 14 and 15 were helpful.
    I have not configured the Inbound 754.  For now the inbound 754 Routing Instructions will be emailed to our traffic department.
    Thank you,
    Have a great day,
    jane

Maybe you are looking for