Request Approved Fulfillment Pending status not changing
Hi All,
I am assigning an application instance to the user and the request enters into waiting stage after all approval with the status "Request Approved Fulfillment Pending". As the application is dependent on other application I assigned the other required application to the user as well but even after that the pending request remains in the same status.
Please suggest
Env: OIM 11g R2
Thanks
Vikas Garg
Hi All,
I am assigning an application instance to the user and the request enters into waiting stage after all approval with the status "Request Approved Fulfillment Pending". As the application is dependent on other application I assigned the other required application to the user as well but even after that the pending request remains in the same status.
Please suggest
Env: OIM 11g R2
Thanks
Vikas Garg
Similar Messages
-
Status Profile : Status not changing in CRM
Hi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open : following transactional contorl selected
To be distributed : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Is any thing i am selecting wrong options in status profile at header level & item level? Much appricieated for solution.
Thanks
shashHi Gurus
Created order with header status as as " In process" , item status is defaulted to " open" and order replicatd to ECC , billed aswell . But when I checked in CRM still status not changing to completed but retains with In process at header level & open at item level.
I would expect order status should be completed at header level & Item level.
Is there any thing wrong with status profile settings at header & Item level? , I have created status profiles with following settings.
I have copied standard status profile " CRMORDER" and assigned to trasaction type and made following settings:
Under Open : following transactional contorl selected
To be distributed : Selected options "Forbidden " & No active
Under In process:
In process : Selected options " Allowed " & Set
Undo Rejection : Selected options " No infulence " & Set
Under Completed:
Complete : Selected options " Allow " & Set
Created status profile for Item i.e. copied standard CRMORD_i and made following changes:
Under Open : No transaction control selected
Under In Process :
Edit : Seleted options " No influence" & Set
Undo Rejection : Selected options " No Influence & Set
Under Completed:
Completed : Selected options " Allowed & Set"
Rejected : Selected options " Allowed & Set"
Actually we are using material which is non deliverable but should be billed, while creating order , I can see staus at item level is open and remains open even after billed in ECC. And also we are mapping Business activity reasons to order reasons in ECC.
Not sure whether i am selecting wrong options in status profile at header level & item level?
Plz help me on this.
Thanks
shash -
Preference status not changed for the processed products
Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
RahulHello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel. -
Partititon1,2,3 in group ODS,FAC status not change after data redistribute
Hello,
first thanks for your help. By now the db2 data redistribute has been sucessful. but another issue occurs , could you give me some suggestion?
1. run Tcode dbacockpit-->db2 for linux, unix, and windows database > configuration>database partiton group
i found the stutus in db partion group NGRP_FAC_AB7 and NGRP_ODS_AB7 and partion 1,2.3. is partion not in partitioning map containers created. I know if we want to change the status from this to partion in partioning map status , we should do a redistribute.
i have made a redistribute action like this
1. double click what i want to distribute
2. select the relevant partition , for example partition 0001
3 click the execute immediatelly button .
when i finished , the status is not changed . so i change the redistribute log located in /db2/db2ab7/sqllib/redist/ AB7.NGRP_FACT_AB7.2008022808582 .
the log message is
Data Redistribution cannot be continued.
Error: Redistribution failed with SQLCODE=-6047 (rc=-2145779603).
the SQL 6047 detail information is like the following. I don't know what happens.
it's a SAP bug just like the previous issue ? Could you give me some suggestion ? Thanks
db2 => ? sql6047
SQL6047N Database partition group cannot be redistributed
because table "<name>" does not have a partitioning
key.
Explanation:
At least one table in the single-node database partition does not
have a partitioning key. All tables in the single-node database
must have a partitioning key before the database partition group
can be redistributed to a multiple-node database partition
group.
The operation was not performed.
User Response:
Use the ALTER TABLE command to specify partitioning keys for
tables that do not have one. Then try the request againBefore redistribution, do your tables reside on only one partition? Does the error message you get list the table or tables that do not have a partitioning key?
All fact tables, ODS tables and PSA tables are created with a partitioning key in a SAP BI system. However, in the FACT and ODS tablespace, there are a few BI management tables (name starting with 'RS') that do not get a partitioning key by default if created in a tablespace on only one partition. The BI data distribution wizard in the DBA Cockpit takes care of some of these tables, for example RSDMFACTAB and RSDMODSTAB. Maybe there are some additional ones.
Please list the names of the tables without partitioning key. If the error message does not contain them, you can get them with the following SQL statement:
select varchar(tabname,30)
from syscat.tables a
where tbspace='<your_tablespace>'
and not exists (select partkeyseq from syscat.columns b
where a.tabschema=b.tabschema and a.tabname=b.tabname
and b.partkeyseq > 0)
Brigitte -
SHC status not changing to - PO created
Hi Gurus,
I am facing an issue with SHC status. It is working perfectly fine in Dev but not in integration.
I have the setting- "Sourcing never carried out" . So, when a shopping cart is created, it should create a PO in held mode.
When I create a SHC with no approval workflow WS10000060, the shopping cart status remains as approved. It doesn't change to Follow on document created.
Regards
KapilPrinter did not exist so, error in PO creation
-
Presence status not changed when using Lync 2010 Remote Call Control
Hello,
I'm currently testing the Remote Call Control functionality of Lync 2010. Call management works fine but I'm surprised that my presence status does not change to "In a Call" when the call is established.
OriginatedEvent, DeliveredEvent and EstablishedEvent are forwarded correctly to Lync Client 2010. All responses are "200 OK".
Is there something more to send to Lync Server 2010 so the status of the Lync Client gets correctly updated to "In a Call" ? Or is a plugin for the Lync Client necessary to achieve this ?
Thank you in advance,
MartinI think there's something missing from your scenario and I don't believe you would need a plugin for this. It's been forever since I've set up RCC with Lync 2010 however. I know this isn't what you're looking for, but I've used this product in
the past to configure Lync and RCC with third party PBXs that don't support Lync/RCC but do have a TAPI interface.
http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html I've been able to get a free trial before and it worked like a charm for an old 3COM phone system. If you can get a trial it might help you compare apples to apples provided
you have a TAPI driver for your PBX.
For more details on what happens behind the scenes, you might have some better luck in the MSDN dev forums:
http://social.msdn.microsoft.com/Forums/en-US/home?category=uc
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Task status not changing in UWL
Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
please let me know any workaround to solve this issue.
Thanks
Saraththats right.
UWL does not refresh immediately. You need to refresh the UWL again.
As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
Thanks
Krishna -
Status not changing to Available after sleep?
Just recently got my wife a MacBook (white). I got her setup with iChat and it's working well except for the status. When she wakes it from sleep, it logs her back into iChat, but keeps a status of "Away". I did change the option in Prefs to "Set me as Available" when coming back or something like that.
What am I doing wrong? Anyone?Hi,
In the General Section of the iChat Preferences you can set one of three option on "Returning to my Computer" which normally refers to Waking from Sleep or coming back from the Screen saver.
One of the options as you say, is to set the Status to Available (If it was set to Away before).
Like you I find it does not work.
I have also tried the sub-options in the Menu Bar Icon bit about Logging out of AIM if I quit (Which Sleep will be considered as the same thing).
Basically I was trying to find if this setting over-rides the lower one.
I Set it to At User Login set my Status to Available which I know works on Start up. But from Sleep this does not over-ride the Status Message when it is set to Away.
If the above setting is not set the same thing happens (it stays as Away when I wake the computer.
Whether I have it set to Set Me as Off Line when I Quit (paraphrased) or not also does not change the Status Message on waking the computer.
Not even turning Off Auto-Reply with Away message made any difference.
That leaves two things.
Does this setting have anything to do with Sleep of Screen Saver ? (is it something else ?)
Is it a bug ?
iChat help has this on Setting the Status.
If you are away from your computer for a time, your status is displayed as “Idle.” Messages that arrive while you’re away wait on your screen
This implies the former. i.e. if you have set the Status as Away and physically leave the computer and the Idle time kicks in before Sleep or Screen Saver then iChat will change you Status to Idle (Although it can not actually display this varient of Idle).
Also there is not setting if I am Idle change my status to Away either.
The Idle time is preset at 600 seconds (10 mins)
My Screen Saver kicks in earlier than this and may over-ride this.
Right this minute I do not have 10 ins to do something else or wait until the Idle time kicks in.
Summary.
This issue seems to be something based on what Away means in this context.
I suggest it refers to the Idle time (which is hidden from your Buddies if you have set Away as the Status).
Hope this helps.
9:56 PM Wednesday; February 18, 2009 -
HU status not changing after GR
Hi All,
For a stock transfer order we create outbound delivery and create HU and then do PGI and at the receiving site we do GR via HU in MIGO transaction.
however the status of the HU changes after it is created and after it is PGI ,,, but after doin GR the status does not change.
Please help me with this ,,,
Regards,
Samuelhi,
I am doing GR in MIGO transaction with respect to outbound delivery via HU, I am not creating inbound delivery.
Regards,
Samuel -
Service Order status Not Changing From Resloved to Closed status
The service order Status not automatically moving from Resolved to closed after 30days.
Observation
We Revived program Z program ,seems to be fine.
I am set the program in debugging mode for testing the Service orders by reduce the time duraion for staus resolved to closed, am getting the getting the Error Test determination procedure is not evaluated .
Point of dout
1) Is there any relation between Test Determination Procedure and Z program.
2) while am checking for Text Customing for Consistency I found an error Log.
3) While creating Service Order Test field was Mandatory
for that have dout about is there any relation between for this program
Thanks in Advance
Regards
Raju.........Solved ...
BD75 (RBDMOIND ) is T-Code and report name ...
need to schedule ... -
Document Status not changing when document approval procedure in SOLAR01/02
Here is my situation:
We created and assigned a Status Schema for Solution Manager Document and to that status assigned a signature strategy. We have defined the following end results for the signature strategy, when the process is initiated:
FROM TO
Copy_editing -> in_progress
In_progress -> Reviewed
Reviewed -> Released
We initiate the process and the author performs the first signature, so the outcome expected is for the strategy to change the status from copy_editing into in_progress so on and so forth.
This is not happening and the document stays in copy editing throughout the approval process.
Any ideas? I can provide the complete configuration done in order to see if we missed something.are you using digital signature? Yes we are using Digital Signature since we want to have the correct approval once a document is loaded and reviewed.
In case not, you do not have to create a signature strategy, but only an approval scheme.
Did you assign the approval scheme to a document type? Yes we have.
What happens, if a user tries to changes the status using the document attributes? currently it doesnt allow you to manually change it once the document is saved but this is what happens in detail.
1. I load the document into solman.
2. based on the digital signature and doc strategy the Author needs to Sign the document once the save button has been clicked.
3. The strategy defined states that the document will start as copy_editing and when singed it will go into in_progress.
This is not happening.
When I load the document I can actually change the status as always as I dont save the same.
Here is the document Strategy configuration we have set:
Status init Seq low high Dig Sig End stat Cancelled stat
COPY_EDITING X 10 10 20 ZTECHENT IN_PROGRESS COPY_EDITING
IN_PROGRESS X 20 10 30 ZTECHAPP REVIEW IN_PROGRESS
REVIEW X 30 20 40 ZTECHAPP RELEASED REVIEW
RELEASED X 40 30 40 RELEASED -
Sales order status not changed
Even after all line items Delivered and Accounting document cleared, sales order's status is "Being Processed".
SO is still showing open order list in VA05..There are not much changes done in SO...What could be the reason...Just check the customer master in Sales Area data Shipping tab - Partial delivery per item. It should be set as D - No limit to subsequent deliveries. Change it to some other value as per the business requirement, and check with new order. It will not show the status Being Processed.
Master data plays a major role in any such conditions.
Thanks/Sheetal -
SAP support
I am not able to change the IDOC status...
I have also processed the IDOCs many times..
Guidance required...
KamalDear Kamal
Please check your entry in SM12 an delete it and again reprocess it with the help of Tcode Bd87
Thanks
Amit Shivhare -
Status Not changed in Activity Screen
Helo Experts
In activity screen MORE menu, i have option SET TO COMPLETED. If i click on it then the STATUS textbox should change to COMPLETED (either from OPEN / INPROCESS). But thats not happening..... i have the following code for it. Kindly go through and can let me know whats the problem.
Set to Completed button
ls_button-text = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT_ACTIVITY/SETTOCOMPLETED' ).
ls_button-on_click = 'COMPLETED'.
ls_button-tooltip = ls_button-text.
ls_button-page_id = me->component_id.
if lv_status eq 'E0003'.
ls_button-enabled = abap_false.
else.
ls_button-enabled = abap_true.
endif.
append ls_button to rt_buttons.
clear ls_button.
ls_button-text = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT_ACTIVITY/PDFAFS' ).
ls_button-on_click = 'CREATE_FACT_SHEET'.
ls_button-tooltip = ls_button-text.
ls_button-page_id = me->component_id.
lv_activity_guid = ls_btadminh-guid.
call method cl_crm_uiu_activity_tools=>check_pdfafs_allowed
exporting
iv_activity_guid = lv_activity_guid
iv_pdfafs_create = 'X'
IV_PDFAFS_SAVE =
importing
ev_pdfafs_allowed = lv_pdfafs_allowed
ES_ORDERADM_H =
if lv_pdfafs_allowed eq 'X'.
ls_button-enabled = abap_true.
else.
ls_button-enabled = abap_false.
endif.
append ls_button to rt_buttons.
clear ls_button.
Thanks in advance
Rohan
Hi Experts
Waiting for your Inputs.
Thanks & Regards
Rohan
Edited by: Rohan M on Nov 7, 2008 3:10 PMHi Rohan,
I can suggest you an approach for this. Try the steps below.
1) Move the button definition to the GET_BUTTONS method of the view controller class. Leave the DO_PREPARE_OUTPUT method as clean as possible. Make sure that the event name is in the same case in the button-on_click parameter and the event handler name (you can check the event handler name in DO_HANDLE_EVENT).
2) As you know there would be NEW STATUS dropdown available to change the status. Go to the getter and setter methods of this attribute. From there there should be an BOL Action which will be triggered. This action takes the status which is set. This is the place where the status change mechanism starts.
3) Try to call the same BOL Action in your event handler COMPLETED. If you want to commit the change to the database, you can call the transaction manager class commit method. You can refer SAVE method of your view impl class.
Hope this helps.
Regards,
Vinay -
Loan Request Approved but it is not updating in R/3 IT 0045.
Dear All,
Loan approval process is completed. But it is not getting update in R/3. Are there any back ground programs needs to run to update the record? Or else where I can check the completed requests in R/3?
Thanks in Advance.
Potru.Hi Siddharth,
Thanks for your reply..
600 SP17 (SAP_ESS) and sap.com/SAP-JEE - 7.02 SP5.
HRPBSIN_LOANUPDINFTY - I run this T-code but system is giving message "There is no loan or repayment request for updating in infotype 0045".
Regards,
Potru.
Maybe you are looking for
-
i was just syncing pics and it managed to sync 2 folders with around 190 pics then i synced the rest it deleted those 2 folders and those 190 pics dissapeared and in the folder on my pc was ipod photo cache? i really want those photos back since ther
-
Hello! Im looking for a way to export a pattern made in Illustrator to auto cad. I would like to select objects inside a shape based on the shape. As you can see here i would like to select all the objects inside the blue circle, and delete everythin
-
Installing NWDI in Existing SAP Portal
hi experts, My project currently require to retrieve and modify ESS (personal information) standard code since the standard personal information in ESS will not meet our requirement. I found out that i need NWDI installed in our environment in order
-
What Program replaces PS Album Starter Edition 3 ??????
I have downloaded PS Element 9 Free Trial but do NOT see the Automatic Organization by Date that Album Starter Edition 3 had . This was great because I could find pictures i loaded by the Year , Month , Day in a Calendar form that I liked . What pro
-
Is there an easy way to rename my startup disk?
I would like to rename my startup disk. I had it my MacBook Pro reprogrammed at the Apple store and I got the name "Snow Leopard 11" added at no extra charge (just kidding). Now that OS X Lion is here, I would like to change the name to reflect this