Request available in PSA but missing in Reconstruct TAB

Hi,
Problem occured while uploading delta load of 2LIS_03_BF.
Reason :- Transfer rules were not Active.
Status :- Request is available in PSA( status Green) but missing from Reconstruct Tab. Now transfer rules are active.
We are updating two data targets with 2LIS_03_BF, So request is fine in another target. Please help us to update data target "0IC_C03".
Waiting for advice
Ashish

Thanks for the repiles,
Only for particular day the data is missing. for example 21st dec. And the eariler data i,e before 21st and 22nd data is available in the cube.
The request is available in the cube, but 0 records added compared 4000 transfer records.
when I vaildate the data in PSA, it is matching with R/3 % percent.
What could be there reason?
Best Regards,
VJ
Message was edited by: Vijay Kumar

Similar Messages

  • Unable to see the request in Reconstruction Tab of Info Cube

    Hi Experts,
    We are scm 5.1 version.
    Actually I have created extraction process to extract data from Demand Planning area. I have extracted data from planning area also. I can see the request in to PSA as well as Info Cube but I am not able to see the request in reconstruction tab.
    Is there any setting to see the request in to Reconstruction tab of the info cube?
    Please advise..
    Regards
    Sujay

    Hi rathy,
    Is there any way to support the equivalent of reconstructions with the new BW 7.0 design?
    I will explian in detail..
    Reconstruction is critical functionality for our current DP solutions, it allows us to "reconstruct" old requests from the backup InfoCube (based on what's been kept in the PSA) and use this to restore data in the planning area to a day in the past.  It is used whenever there is a technical or user error than needs to be un-done.  I believe there is a way to accomplish with the BW 7.0 design.
    Please suggest...
    Thanks in advance..
    Regards
    Sujay

  • Request status is Green,But no data is loaded into infocube.

    Hi,
    I have loaded the data from Flat File to Infocube. The status of the request is Green. But no records are added into infocube.
    The data is available in PSA.

    Hi Jen,
    I had created DTP and scheduled it. There shows a request in infocube with status green but no records added.
    I have checked in PSA , the data is present in PSA.
    I am wondering why data is not uploaded from PSA to Infocube.

  • How to update one field in to ods ,data is available in psa for that field

    Dear All,
    The field is already has data in psa but now i want to load it into ods just assinging update rules.
    i was assigned at update rules and activated update rules. then what i have to do .
    to get the data in to ods from psa.
    its very urgent please.
    Thanks and Regards,
    satya

    Hi,
    1 goto RSA15
    2 find your infosource
    3 select your request
    4 right click on request and select "Update Data Immediately"
    Hope this helps.
    Regards,
    Purvang

  • Data not visible in ODS though available in PSA

    Dear All,
    I am working on BW where data extraction is from CRM. The client needs reports after survey is carried out in a set of questionnairres containing questions and answer. Currently four set of questionnairres is created in the dev server and sample data is updated.
    Till last week we were getting all the transaction data for all the questionnairres, now one of the questionnairres is modified and after extraction we find that for the modified questionnairres we are able to extract the corresponding questions and answer option upto the PSA but the data is not visible in the ODS.
    what could be the reson for the same?
    Any help will be suitable awarded with points!
    K Dengupto

    Hi ,
    Are requests reaching the DSO...IF yes Try to check whether your request in DSO is getting activated .
    Check whether  new field is added and same has been mapped through transformation.
    Did you try to see the monitor at the time of loading and try to trace the cause there if the requests are not getting updateded to the DSO
    Regards
    Rahul Bindroo
    Edited by: Rahul Bindroo on Feb 7, 2008 12:05 PM

  • Requests not on Reconstruction Tab

    I just deleted a lot of requests out of a cube.  When I go to Reconstruct/Insert, some (not all) of them are missing from the list.  What would cause a request, once deleted from the cube, to not show up on the Reconstruction Tab?

    hi Castles
    U can see the requests in construction tab
    1) select the selection button at the bottom of the reconstructiuon tab (the symbol of that push button will be selections button. it will be in thee colors)
    2) then a pop will invoke give the required info and then specify the date from which data u wan to see the requests ..
    now say ok .. then u can see the requests there at the reconstruction tab
    regards
    AK
    assign points if usefull

  • Delete request in ODS, not in reconstruction tab

    Hi experts,
    Sometimes when i delete a request in ODS, it can be found in reconstruction tab. Sometimes you cant.
    In which scenario it can be found and in which it cant. In case you need that deleted request to reconstruct and you cant find it in reconstruct tab, what you do.

    Hi,
    Whenever u delete a request from ODS,it might be seen in "Reconstruction" tab only when it still exists in PSA.Once the request gets deleted from PSA,then it wont be seen in
    "Reconstruction"  tab.
    Hope it helps u
    Thanks & Regards,
    Madhu

  • Duplicate records exists in same request of a PSA

    Dear SAP Professionals,
    Please look into below issue I am facing.
    1) I have only 1 request (green) in PSA.
    2) When I am looking into that request, I found there are 4 Packages.
    3) In Package 3 & 4, I found the same records has been extracted twice.
    Here I am not able to understand, why this is happening?
    I tried to run the extractor in R/3 side, and found only 7 records exist for that particular condition.
    But when I look into PSA Maintenance screen, there are 14 records exist for the same condition (7 records of Pkg 3 + 7 records of Pkg 4).
    Request you to provide the necessary guidance.
    Many thanks in advance.
    Best Regards,
    Ankur Goyal

    Hello Ankur,
    You didn't mention whether you are loading master data or transaction data.
      If you are loading Master data so it will not create any problem, because it will be overwrite. It will load  Package  3 firstly then data of Package  4 will be overwrite with Package 3. So there will be only 7 records in data target .
        But if you are loading  Transaction data  so  pick the data once again from the R/3 and check  and for  this  you have to delete previous request.
    Thanks
    Abha
    Edited by: Abha Sahu on Jan 29, 2010 3:50 PM

  • Availability, Heartbeat Performance attribute missing in MTE Node

    Hi,
    We have registered our CCMS agents with Central Monitoring System and they are working fine. Our collect and analysis RFCs also working fine as well. But when I am going to RZ20 > SAP CCMS Technical Expert Monitors > CCMS Selfmonitoring > <CEN SID>> CCMS_Selfmonitoring > CCMS Agents > <SAPCCM4X.Hostname.00> there Heartbeat and Availability MTE classes are missing. For some systems these are working fine. Please help. 
    Regards,
    Dinesh Bhatt

    This problem solved by SAP.

  • Data found in PSA but not in Cube

    Hello experts,
    I am facing following issue while loading data into Cube:
    Infocube is scheduled through Process Chain. Data is getting loaded into Infocube daily.
    Now, some of the records are missing into Infocube are available in PSA. There is no any selection criteria set at Transfer rule level or Update rule level.
    Can anyone help me for the same?

    one possibility could be that you are trying to load it using get yesterday in the InfoPackage.....
    The problem could be that the date on which you have applied get yesterday is not the correct date....try to map on the correct date...
    Second possibility could be....there could be some routine that is filtering the data...like start routine at transfer rules or update rules...though you mentioned nothing as such..
    Check if there is some routine at the InfoObject level.....
    If you have enhanced your DataSource then check the same after replicating...very feeble possibility..
    Kindly revert.
    Assign points if useful.
    Regards
    Gajendra

  • Auto updated firefox on OS X but missing "open in 32-bit mode" check box in get info. How do I default firefox to open in 32-bit mode?

    Auto updated firefox on OS X but missing "open in 32-bit mode" check box in firefox 'get info'. How do I change firefox to open in 32-bit mode without the checkbox available?

    After long phone call with apple support the thing that seemed to work was:
    make a new user.
    Copying the itunes app from the new user’s Application folder to the shared folder.
    Then open up your old user account and copy it over the old itunes app.
    hope it works for you too

  • Exact same request works in browser but not in my app!!!

    Hello all, I have an application that posts requests through an https connection to a web server. When everything goes well, the server is supposed to send me an xml file. Once my String is encoded and ready to be sent, it looks something like this:
    InputSegments=%3c%3fxml+version%3d%221.0%22+encoding%3d%22UTF-8%22%3f%3e%3cCNCustTransmitToEfx+So when I send it, I receive an error from the server saying that the request is incorrect. But when I copy paste the request String to the browser, it works great!!! I tried to change requestMethod to GET, but I still get the error message from the server. So I can't figure out what is wrong here... I am posting my function hoping that somebody will be able to help me:
    private static class SecuredConnectionInstantiator extends Thread
        public boolean stop = false;
        private int returnCode = -1;
        private String securedUrl = null;
        private String xmlRequest = null;
        private String outputFile = null;
        public void run()
          try
            URL objUrl = null;
            HttpsURLConnection urlc = null;
            String inputLine = null;
            StringBuffer xmlResponse = null;
            xmlResponse = new StringBuffer();
            objUrl = new URL(securedUrl);
            urlc = (HttpsURLConnection)objUrl.openConnection();
            if (urlc == null || objUrl == null)
              throw new MalformedURLException();
            urlc.setUseCaches(false);
            urlc.setDoInput(true);
            urlc.setDoOutput(true);
            urlc.setRequestProperty("Content-Type","application/x-www-form-urlencoded");
            urlc.setRequestMethod("POST");
            OutputStream out = urlc.getOutputStream();
            OutputStreamWriter writer = new OutputStreamWriter(out);
            String tmp = encode(xmlRequest);
            tmp = "InputSegments=" + tmp + "&cmdSubmit=Submit";
            System.out.println(tmp);
            writer.write(tmp);
            writer.flush();
            writer.close();
            //Si le thread n'a pas �t� intterompu, on obtient la r�ponse et on
            //l'enregistre sur disque.
            if (!stop)
              BufferedReader xmlResponseReader = new BufferedReader(new InputStreamReader(objUrl.openStream()));
              BufferedWriter xmlFileWriter = new BufferedWriter(new FileWriter(outputFile));
              while ((inputLine = xmlResponseReader.readLine()) != null)
                xmlResponse.append(inputLine + EOL);
                xmlFileWriter.write(inputLine);
                xmlFileWriter.flush();
              xmlResponseReader.close();
              xmlFileWriter.close();
              //La requ�te s'est termin�e normalement...
              returnCode = 0;
          catch (MalformedURLException e)
            //Erreur lors de l'appel...
            //returnCode = code d'erreur...
          catch (IOException e)
            //Erreur d'E/S...
            //returnCode = code d'erreur...
        }Your help will be greatly appreciated!
    Alex

    I solved the problem, I dont know if it's a good way to do this, but here's what I've done: Instead of opening a connection to the server and the send the request throug the stream, I open the connection and pass the request next to the server's address:
            xmlResponse = new StringBuffer();
            objUrl = new URL(securedUrl + "?InputSegments=" + URLEncoder.encode(xmlRequest, "UTF-8") + "&cmdSubmit=Submit");
            urlc = (HttpsURLConnection)objUrl.openConnection();Anyway thank you all for your help!

  • How do I download a movie to my phone?  when I click 'rent' through itunes, I get a message that there is not enough available local storage, but I can manage my local device storage usage in 'Settings'.  I have activated icloud, but this has not helped.

    How do I download a movie to my iphone 3G?  When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'.  I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone.  thanks for any help you can give.

    I always do my Rentals with the itunes program on the computer.
    Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an  option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it.

  • The search function in the itunes store does not work.  It will accept a request and suggest searches but then it locks up and will not search.  Clicking on the magnifying glass or a suggested search does nothing.  Re-installing itunes has not helped.

    The search function in the itunes store does not work.  It will accept a request and suggest searches but then it locks up and will not search.  Clicking on the magnifying glass or a suggested search does nothing.  Re-installing itunes has not helped.

    everything you stated here is exactly what i have done and have got nowhere. i have windows 7 64 bit on a hp 8 g of ram desktop. im also looking for help

  • I have been trying to get my iPhone to sync with a new computer.  As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone.  How do I get the apps on the old one to the iPhone and then the new c

    I have been trying to get my iPhone to sync with a new computer.  As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone.  How do I get the apps on the old one to the iPhone and then the new computer?

    You don't. Backup your itunes library on the old computer and move it to the new computer.

Maybe you are looking for