Request bios MSI R9 270 Gaming 2GB

Hello,
S/N:602 - V305 - 03SB1405097813
speedyshare.com/WE42P/Pitcairn.rom

Use the attached.
Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (100.rar) and put the included file (TV305MH.100) on that stick.
Rename TV305MH.100 to 100.rom. Put the atiflash.exe also included in the archive provided on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 100.rom [ENTER] and let it flash the vbios.

Similar Messages

  • Request new BIOS for MSI R9 270 GAMING 2GB

    Hi there, I use W7SP1 with a Gigabyte GA-H87-HD3 mobo and the 13.12 drivers(14.4 suffer from very high OpenCL to Direct3D interop lag unfortunately, which is a showstopper with madVR) and I just bought this board with the exact same BIOS version number as on this link: techpowerup (.com)/vgabios/149707/msi-r9270-2048-131106.html
    It's fairly silent under load and I'm happy with that, but when idle the fans seem hardlocked to 1040 rpm
    Whatever fan percentage higher than 18% does increase the fan rpm speed, but anything lower still gives 1040 rpm.......what is the point to cool the GPU down to 28°C when its TJmax is 95°C? I would like to drop the fans speed when idle to maybe 700/800rpm and get the GPU to reach 40°C or so?
    I run a SSD with a 350rpm oversized CPU fan, a passive PSU and several oversized case fans that also run very slowly, those 1040rpm are killing me....I used to own a VTX3D Vchamp HD7850 that allowed me to make my own custom fan speed curve in Afterburner: dead-silent when idle and slowly ramped up under load, perfect
    Of course its cooler was a joke compared to your TF4 but you can see that Asus are now releasing graphic cards that are semi-passive with their fans shutting off until the GPU reaches 65°C, it makes no sense to me to use the TF4 at 1040 rpm when idle(and even more so on the 70W TDP GTX750Ti).
    Long story short, I would really appreciate an unlocked BIOS please so I could build my own fan speed curve in Afterburner as I used to. I do plan on buying the future Maxwell's(a twice faster 750Ti would be awesome), I dearly hope that you will reevaluate your TF4 fan speed curves because otherwise I would more than likely buy a semi-passive Asus next time. Talk about wasted potential
    I guess you hardlocked it so dumb ppl wouldn't set the fans to a fixed very low speed and toast the board, but posting an unlocked BIOS on your forum that's aimed at power users is just showing that you care. I know EVGA did post this kind of BIOS updates recently and you polished the TF4 cooler to such extents that it's truly a crying shame to be stuck at 1040 rpm and 28°C when idle
    There is no question that TF4 is extremely effective under load with a 150W TDP GPU, but you can see that the 270X Powercolor board is quieter when idle in this comparison: tomshardware (.com)/reviews/radeon-r9-270-benchmark-review,3769-5.html
    Hope you can help, I will gladly spread the word on HTPC forums because this board is close to perfection when using madVR.
    Thank you very much in advance

    OK thanks for the reply, but the 18% cap seems BIOS based...I have a hard time believing that they can't run any lower than 1040 rpm
    Are you a mod? Working for MSI? This looks like a wild guess more than an official reply if you don't mind me saying.
    For the record, that VTX3D board I mentioned in my previous PM was able to go down to 1%.
    I would fix it myself but there are no BIOS editors for the R9 serie apparently....MSI simply capped the lowest PWM value: tpucdn dot com/rbe/RBE_Fan.png
    Whatever way their speed's being throttled(PWM or voltage), they must be able to go slower than that. I could provide you links but EVGA did make clear that they capped the lowest speed of the fans on some of their boards so dumb users wouldn't fry them but they were entirely able to release unlocked BIOS binaries.
    At this point I could either return it or unplug its fans and slap a 600rpm 140mm fan onto the board using zip ties.......it's just amazing that MSI managed to ultimately fail on such a detail. All the work put into the TF4 cooler goes down the drain
    flobelix seems able to help, I hope he'll chime in: forum-en.msi dot com/index.php?topic=180521
    Quote
    Fan controller actually can control the fans, and the GPU gets less hot

  • UEFI GOP BIOS request for MSI R9 270 Gaming 2G

    Hi,
    I'd like a GOP VBIOS for the R9 270 2GB,
    SN: 602-V305-01SB1311024935-5X2
    thank you so much!
    Fan

    Use the attached for your card.
    Then unpack the provided archive (100.rar) and put the included file (TV305MH.100) on that stick.
    Rename TV305MH.100 to 100.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 100.rom [ENTER] and let it flash the vbios.

  • GOP / UEFI Vbios requests for MSI R9 270 Gaming

    Hello.
    S/N: 602-V305-01SB1312001923
    Can i have a BIOS file with UEFI / GOP for my graphics card?

    Use the attached for your card.
    Then unpack the provided archive (100.rar) and put the included file (TV305MH.100) on that stick.
    Rename TV305MH.100 to 100.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 100.rom [ENTER] and let it flash the vbios.

  • GOP / UEFI Vbios requests for MSI R9 270 Gaming 2G

    Hello!!!
    S/N:602-V305-010B1402012448
    Current VBios:_https://mega.co.nz/#!DMBUURwQ!IhA5wTvUfQTW7tqckfAFO6uiPTNxmbaiHORnHi9 FilM
    Thx!

    here it is
    for flashing: http://www.techpowerup.com/downloads/2311/ati-winflash-2-6-7/

  • Request a GOP UEFI bios for MSI R9 270 Gaming 2g

    MSI R9 270 Gaming 2g
    sn:602-v305-010b1402051637
    Bios Version: 015.041.000.000.003038(113-C6300100-X01)
    Original vbios: speedy.sh/mD8uN/Pitcairn.rom
    Thank you very much.

    Use the attached vbios for your card.
    Unpack the provided archive (100.rar) and put the included file (TV305MH.100) on that stick.
    Rename TV305MH.100 to 100.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 100.rom [ENTER] and let it flash the vbios.

  • Request for a GOP UEFI bios for R9 270 gaming 2g

    Request for a GOP UEFI bios for R9 270 gaming 2g
    thank you

    Request for a GOP UEFI bios for R9 270 gaming 2g
    thank you
    BIOS
    http://qd.baidupcs.com/file/f854518f3ebcb6e0918296e99dedbe39?xcode=651e731f64d217396dcee8d89df53b8bbc89b6a7ca8cf985&fid=1141293504-250528-731006637695005&time=1396108361&sign=FDTAXER-DCb740ccc5511e5e8fedcff06b081203-QapW05N0P5fS7fKuuF9rsE%2BzbVI%3D&to=qb&fm=Q,B,T,t&newver=1&expires=8h&rt=pr&r=691888291&logid=3537789216&vuk=1141293504&fn=Pitcairn.rom

  • "Legacy Mode" BIOS request for MSI R9 280X GAMING 6G

    "Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
    S/N: 602-V277-310B1407096530
    Installed BIOS: TV277MS.3A0
    Hi,
    I have the annoying problem with my new video card: a screen is periodically blinking in 2D. Probably that problem already solved in a newest BIOS?
    I have to use "Legacy" mode because of my PC does not start otherwise.
    Related hardware: MB: MSI P67A-GD65 B3 (BIOS 1.19), CPU: i7-2600K, Monitor: HP ZR2440w (DP connection).
    Thank you.

    here is .3A1
    TV277MS.3A1 legacy
    TV277MH.3A1 uefi
    flash guide:
    Quote
    Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (xxx.rar) and put the included file (TVxxxxx.zzz) on that stick.
    Rename TVxxxxx.zzz to zzz.rom.
    Put the atiflash.exe from: https://www.techpowerup.com/downloads/2306/atiflash-4-17/
    on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 zzz.rom [ENTER] and let it flash the vbios.

  • UEFI VBIOS for MSI R9 270 GAMING 2G

    Hi,
    I'm also looking for UEFI/GOP Bios for my MSI R9 270 GAMING 2G.
    Serial: 602-V305-03SB1403015553
    Thanks in advance

    Use the attached.
    Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (100.rar) and put the included file (TV305MH.100) on that stick.
    Rename TV305MH.100 to 100.rom. Put the atiflash.exe also included in the archive provided on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 100.rom [ENTER] and let it flash the vbios.

  • (MSI R9 270 GAMING 2G) BF4 ARTIFACTS

    Hi.
    Is this artifacts normal? This artifacts appears not regular. How can i prove that my card works not fine in service center - they check my card FurMark and detect nothing. What shold i do to replace my card to the same?
    PS: GPU BIOS is TV305MH.100

    Board: ASUS P8Z77-V
    Bios: 2104
    VGA:   MSI R9 270 GAMING 2G (s/n 602-V305-030B1406002925)
    PSU:   Cougar CMX1000
    Intel Core i5-3570k
    MEM: Samsung 1600 2x4gb M378B5273DH0-CK0
    HDD: Plextor M5S 256Gb
    COOLER: Scythe Zipang
    OC: (Turbo)4.2Ghz 1.18 CPUV ram: 2133 Mhz 1.55v
    OS: Windows 7 64bit Professional
    There was no problem in BF4 on this hardware with my R9 290 Gaming 4G. I wrote about this card before https://forum-en.msi.com/index.php?topic=182166.msg1308644#msg1308644

  • MSI R9 270 Gaming issues

    To start with, the LCD screen I have is LG E2240S
    Serial number of the card is   
    602-V305-01SB1311012861
    Bios version is
    015.041.000.000.003038 (113-C6300100-X01)
    Driver is the 13.12. WHQL version
    Windows 7 SP1 x64
    I am experiencing a problem in games, to describe it best I will describe it per case:
    In Diablo 3 there are moving horizontal lines that go from top to bottom, V-Sync option has no effect on this whatsoever, neither is downclocking of the core speed, undervolting via CCC overdrive, changing of VGA cable, nor the adapter change.
    In War Thunder they don't move top to bottom, but do jump up and down.
    Crysis 2 has the same issue as War Thunder, horizontal lines "vibrating", I should add it looks as if though it is electronic noise in the signal in a way.
    Other games with horizontal line "vibrating" are Warface, Path of Exile.
    On the other hand, Starcraft II has no issues whatsoever, along with Ridge Racer, Red Alert 3, Tribes Ascend.

    Thank you for your reply,
    Link for bios
    http:// www . sendspace . com/file/o2lqeq
    Main Board: M4A87TD/USB3
    Bios Version: 2001 (latest version from Asus website)
    Video Card: MSI R9 270 Gaming
    PSU: Cooler Master GX 650W 
    12v rail Rating of listed PSU: 52A (single 12V rail)
    CPU: Phenom x4 955
    Memory: 3x2 GB DDR3
    SSD/ HDD: WD Black 2TB, WD Blue 500GB, SSD Kingston 60GB
    CPU COOLER: CM Hyper TX3
    Sound Card: Asus Xonar DS
    OC: (Yes / No) No
    Operating System: Windows 7 SP 1 x64
    I forgot to mention I tried a different DVI>VGA adapter, with a secondary VGA cable as well, there was no change.
    I also switched to the other 6 PIN to see if it would change anything.
    I screengrabbed videos of games while this issue occured, and the videos show no problems whatsoever.
    Tell me if you need more information that I can provide.
    Thanks in advance.

  • REQUEST GOP / UEFI BIOS for MSI R9 270 GAMING

    Hi there!
    Could I get the latest UEFI GOP VBIOS for MSI R9 270 2G GAMING please?
    Serial number: 602-V305-03SB1401002324
    Current VBIOS: _https://drive.google.com/file/d/0BzVByGARY8OCNXZBTXpMLVJaems/view?usp=sharing
    (without _)
    Many thanks

    Svet could you tell me, why mine factory .rom bios file got different hash sha1 then Avelis has? Even if it's the same version: 015.042.000.001.000000
    This is mine:
    _https://www.dropbox.com/s/2y0l4cphdxkq6vl/Pitcairn.rom?dl=0    (without _)
    sha1:  090b2b863cae8fdaaa78921fed7d570831c433d 4
    Avelis's:
    _https://www.dropbox.com/s/8x6ocfv6vojf1u4/Pitcairn3.rom?dl=0    (without _)
    sha1:  e75a890be8e5a88e85acdc287401c8ca3b0e5d0 0
    Which one is correct and it's still latest?

  • Request: UEFI BIOS MSI R9 280X GAMING 3 G

    Hello there,
    I require a uefi bios for r9 280x gaming 3 gb graphics card.
    S/N: 602-V277-19SB1309097412
    Link to my bios:htt://www.dropbox.com/s/36lp55nqkbwn2cc/Tahiti.rom which was extracted from gpu-z
    Could you please also show me tutorial on how to actually flash bios cause i'm rather new on this entire matter :D
    Thank you for your help.

    here it is
    For flashing: http://www.techpowerup.com/downloads/2232/ati-winflash-2-3-0/

  • [REQUESTS] Vbios - MSI R9 290X Gaming 4G

    Model: MSI R9 290X GAMING 4G
    S/N: 602-V308-01SB1312025606
    Current version (BIOS): not original (My card is a second hand)
    Thank you!

    Use the attached.
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (TV308MH_100.rar) and put the included file (TV308MH.100) on that stick.
    Rename TV308MH.100 to 100.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 100.rom [ENTER] and let it flash the vbios.

  • Bios msi gtx 660 gaming.

    Hello I have the msi gtx 660 gaming, I want to no if there is a newer bios for my card, and if so where can I get it.
    s/n 602-v287-35sc1311018411
    and can somebody tell my maybe with an other bios it can clock a bit higher

    Quote from: flobelix on 21-March-14, 00:53:30
    It should not be write protected but if so disable write protection with the following:
    - Put nvflash and the vbios file on it and boot from the stick.
    - Then type nvflash --protectoff
    - Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter.
    - Confirm the questions and let the tool flash.
    I did that to, and after that I did --protect on, but looks like its corrupt now, this is wat I get.
    also in dos.

Maybe you are looking for

  • HT1657 Im having trouble downloading my rental on my apple tv.

    Im having trouble downlading my rental on my apple tv.

  • Missing In-Reply-To headers

    When sending replies to messages, the phone is not sending any In-Reply-To header of References header for replies, which is breaking threaded mail. This seems pretty amazing since In-Reply-To has been around even in the original RFC822 spec of 1982.

  • How to view songs that were recently downloaded, but not yet assigned to a play list?

    I am using the new iTunes, version 11.0.2. In the older version, there was a category for last downloads. This allowed me to to view all the downloads in one place then assign them to a playlist. Is this hidden somewhere or there is another way to se

  • Unpublish site from another computer

    Situation. I created a web site and published it using my laptop(A). I am now using my desktop(B) and want to unpublish the site that I created using laptop (A). The thing is that I failed to copy the domain and place it on desktop (B). I have the ac

  • Updated to 6.0.1 wifi issue

    So I started a new discussion because my problem seems a little different than the others I saw. I just updated to 6.0.1 then ended up having to restore my ipad. After I restored, wifi started giving problems. I can connect to several different netwo