Request deleted in Base ODS

Hi
We hhave an ods1 where in its supplying the data to other ods2.
Now there are 5 requests in ods1.
and these 5 request are also in ODS2.
Now when i tried to delete the top request from ODS1, i got the message that this request is existing in the ODS2. I just said OK. Now that request got deleted from the ODS1 but didnt get deleted in ODS2.
Actually i was in assumption that when we delete the request from base ods1, In ods2 also that request will get deleted.
Can you just tell me what will be the implications?
Regards
Rak

Hi Rakesh,
No it is not automatic. If you are uploading in full mode you can delete request from ODS1, but ODS2 is not affected.
Ciao.
Riccardo.

Similar Messages

  • Can any one explain how the Requests deletion in an ODS & Cube works?

    Can any one explain how the Requests deletion in an ODS & Cube works & differs?

    It works in the normal way as you delete a request but following are the differences between them
    1) If you try to delete a request from the ODS, all the requests which are loaded after this request also get deleted, and in the cube its not.
    2) You cannot delete a request from the ODS once its change log has been deleted, similary you cannot delete a request from the cube that has been compressed.
    3) you can delete overlapping requests from a Cube. but in ODS its not possible.
    Regards,
    Bharat

  • Error during ODS activation- request deletion

    Hello Gurus,
    We had a problem during ODS activation, could you please help?
    We are on BW 3.1
    Activation of an ODS failed with the message, "Fiscal year variant MC is not maintained for calendar year 2009u201D, u201CError getting SID for ODS object ZODS_O02u201D and u201CError when assigning SID: Action VAL_SID_CONVERT table 0FISCPER."
    The expected data for 2009 didn't arrive, so the activation step in the proces chain has failed.
    What I've done is, just deleted the request from the ODS.
    But while this job was running, there was a short dump, and the same job was shown as cancalled under SM37. Though the request was successfully deleted from the ODS, it is showing as cancelled in SM37.
    I've given below the log details of the job.
    Job started
    Step 001 started (program RSDELPART1, variant &0000000003334, user ID ABCD)
    Delete running: ODS object ZODS_O02, from 310,818 to 310,818
    Delete is scheduled; Selection conditions were substituted
    Request REQU_4AZBURUGR09EXTAS8A9IRZUI4 successfully deleted from ODS object ZODS_O02
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled.
    Could you please clarify the reason for the short dump and for the job getting cancelled?
    thanks in advance,
    Raj

    Hi,
    As an help i suggest you can first check the corresponding message for the "Message type X" in transaction se91.
    Follow the below procedure for the same :
    1.Execute ST22 > Double click on any entries
    2.Go to Source Code Extract
    3.Locate u201C>>>>u201D and you will see Message
    i.e Message X041 (XX) in this example.
    - XX is the message class
    - 041 is the message class no. in the example above.
    4.Now open SE91.Enter the details we found from Source
    Code extract in ST22.Click Display
    5.Find the corresponding message.
    May be the message could much more elaborate your problem so it could be handeled properly.
    Thax & Regards
    Vaibhave Sharma

  • Can a request be deleted from Overwrite ODS?

    Hi,
    Can I delete a request from a Over write ODS? and also let me know when can a request is deleted with out affecting dependent reqeusts in an Overwrite ODS and Additive ODS?
    Cheers,
    Raj

    Hi.
    Do you mean to delete the activated requests ?
    If yes then if you delete the inbetween request then the request that had the higher number will also be deleted.
    If its not activated then you can delete any one you wish.
    If your request is activated in the ODS, You know the range of records you need to delte irrespective of the request you should go for selective deletion.
    If you require to delete the complete request then its obvious to go with the request deletion.
    Assign points if helpful.
    Regards

  • Data request deletion problem from remote system.

    Hi experts.
    Now i am facing one critical problem . The description is as following:
    we design the edw level in one phsical BW machine(A) which contains only dso infoprovider. This machine(A) works as datasource to provide data to another physical BW machine(B).
    The dso in A system is exported as datasource , Cubes in B system load data through this datasource .
    We first do the initialization with data contained on B system and then load delta data from A system. But if we want to delete some request in system A ,the system indicate this request can not be deleted unless the initialization in system B is deleted( this will lead to all the data missing in system B).
    Can anyone explain this mechanism to me , please help me suggesting some kind of methods to delete the request in system A without deleting the initialization information in system B.
    Thanks in advance.
    Waiting online for your kindly reply.

    1. Ask your Basis to look into it.
    2. try analyse your Baqckground Process in SM51.
    3. Is your Deletion Job started immediately or any Delay?
    4. If That cube or ODS has only this request which you are deleting, go with Context Menu Cube or ODS (by right click) --> Delete Contents.
    Delete Contents will improve performence compare to Request Deletion..
    If you have request more than this, you should not go for this.
    Nagesh Ganisetti.
    Assign points if it helps.

  • Unable to Delete Data from ODS ---Tricky

    Hi Frds/ BW Guru's,
    I am trying to delete the request from ODS , I could see the job being scheduled for deletion, but finally the request is not deleted. What can be the reason for this and how can I go about from here, we have to do it in production.please respond soon .
    Thanks,
    Krish

    Generally, I wouldn't think the deletion would be impacted by tablespace issues except for two scenarios -
    With Selective Deletion, the BW deteremines how many rows you will be deleting and if it determines that it will be more than 10% of the rows in the tables, the BW decides that it is faster to copy the table, excluding the rows to be deleted, and then drops the old table and renames the copy to the original table names.  In this case, there must be enough freespace in the tablespace to accomodate the temporary copy as well as the original table.  I don't believe applies to deletion of a Request, only a Selective Deletion.
    Request deletion requires temporary space in the Rollback tablespace.  The database must maintain an image of the table before the deletion until the change is committed, so that in the event the deletion process fails or is cancelled, the deletes that were being done can be rolled back to restore the table to its previous state.  Again, unless this Request held a very large amount of data, the amount of rollback space availalbe should not be an issue.
    I would guess Authorizations is a good canidate for the cause.  There was a fairly recent Note 810201 that allows for the creation of a new RSADMIN parameter that is designed to permit deletion of a Request, but NOT a Delete All Data.
    Pizzaman

  • Error in PSA Request deletion

    Hey all,
    how are you!
    I have a little glitch in my Processchain and since I can not seem to find an answer myself I was wondering if any of you might give me some feedback
    In a processchain I created, I wanted to delete the PSA-table contents and I added this process called "Deletion of requests from PSA".
    But whenever I check my daily run, I have to get back (due to its "red" nature) and do manually 'rightclick>repeat' and then all seems well.
    The 'red' condition upon monitoring gives me the message "no sub-request for this request"...
    well...anyone?

    Hey Olivier,
    It is a transactional load from an R/3 ODS.
    In the processchain first we load an ODS and then we start with a request-deletion on the PSA.
    Options:
    - older then...zero days
    the others are not used.
    Nothing fancy
    Just following
    http://help.sap.com/saphelp_nw70/helpdata/EN/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
    Edited by: richard boom on Jan 17, 2008 2:29 PM

  • Mistakenly deleted data on ODS ...Plz help

    Hello friends,
    Mistakenly i deleted data from ODS. After that immediately processed Initialize Delta Process .  Now i didnt get what to do?
    I am new in BI. Pls help.

    I guess every day morning they schedule Job in LBWE to update records in delta Queue.
    SM37
    job name - enter *LIS*
    user - *
    execute it..
    You can double confirm that no job is scheduled for particular application after today morning.
    Then -  In PSA give request newer than date-blank and refresh.. ensure no psa request is deleted recently. Depends on data volume, in some cases frequently PSA records will be deleted after successfully loaded to target.
    If you have entire request - execute DTP. It will bring all records in PSA to target.
    Edited by: Priya.D on Apr 6, 2010 12:28 PM

  • Requested deleted in Transport Organizer

    Hi,
    How can we find out request deleted in Transport Organizer (SE10). Is there any table or log which possess the request and the person who deleted the request.
    Thanks.

    Dear Rakesh,
    We just can find only modified ,released ,released from starting requests in Transport organiser,
    I suppose we cant find the deleted requests and person responsible in BW side.
    The Basis people may help u in this issue as they maintain dumps of what has been loaded and deleted on a timely basis..Please do contact basis People.
    Assign points if needful.
    Best Regards,
    VVenkat.

  • Selectively deleting load from ODS using Process Chain

    Hi All,
    I have a requirement in which I have to delete the last load of the current month if any and leave the load of the last month untouched which has to be done using process chain.
    I will try to elaborate the condition required like say we have a data for June in the ODS already (date 10) and when the load for July will come it will not touch the June data but on 2 July the load of first July will be deleted without touching the load from June 10. (The PC will run for the first 10 days of the month).
    How can this be implemented, There seems to be some FM for this but are there any other method by which the same can be implemented without much use of ABAP.
    Any relevant suggestion would be awarded points
    Regards,
    Samved

    Hi Bhanu,
    Thanks for the reply.
    I tried to generate the program but that can be used for selective deletion from the ODS i think soo.
    But my requirement is basically to delete the complete request from the ODS and not any selective deletion and at the same time I cannot use the complete deletion option as that will delete the request from the last month also.
    Are there any optioin at the level of Info package which can be used for these type of deletion.
    Regards,
    Samved

  • InfoPackage with overlapping requests deletion

    Hi,
    what is an InfoPackage with overlapping requests deletion? Where is it used?
    Regards

    hi,
    check out the below link it answers your query in detail.
    Re: Delete overlapping request
    hope it helps.
    regards,
    AL

  • Plant Maintenance - Deleting installed base

    Plant Maintenance - Deleting installed base
    I have set up deletion flag in an installed base and trying to create a new one with the same material and serial number.
    But system given error saying that already exists.
    Pls advise.

    hi
    go with this link
    http://help.sap.com/saphelp_47x200/helpdata/en/19/db7cd6d82c11d19ddf0000e8323350/frameset.htm
    -ashok

  • I lost my Ipad 5 and requested delete all from find my phone, fortunately they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?

    I lost my Ipad 5 and requested delete all from find my phone,  they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?

    The iPad should be asking you for the Apple ID and Password when you turn it on.

  • Old spool requests delete

    Hi all,
    still we are facing spool over flow issue, even though we installed kernel level-236/64bit.
    We had scheduled a batch job to convert spool request deletion date with the report-RSPO2010, and it is running fine.(it run daily before spool reorg job run).  SPOOL_REORG job also finishing with out errors but still spool numbers volume is very high.
    SAP_BASIS level is 18.
    Any idea to over come this issue. Please guide me.

    Hi Nani,
    Please refer to the following post:
    Re: Database error: TemSe->XRTAB(3)->1 for table TST01 key
    This over flow may occur due to lot of spool requests being generated as a result of certain background jobs or manual requests from users while generating some reports. During busy time of business this happens.
    To know which job is responsible to genereate more number of spool request please do following:
    T-Code: SM37
    Job name: "*"
    User name: "*"
    Select "FINISHED" check box.
    Job Start Condition:
    From date: Past 10 days to cureent day (date) and click execute button.
    In the resulting window within "Ln" column you will see a mat like symbol representing the job generated spools. Select that particualr job and right click and select "Spool List" which will display number of spools generated by the job. You can contact the owner of the job and communicate with him if the number is too big.
    Please let the community know if more information is required.
    Regards,
    Nani Chowdary.

  • BADI/BAPI/... for request deletion required

    Hello,
    Does anyone know if there is any BADI, BAPI or recommendable standard programme that I could use to have a request deleted (result should be the same like deleting the request in RSA1) based on the request number ?
    Thanks for any advice.
    Klemens G.

    Hello Kishore,
    Thanks for the 2 tips.
    The BAPI you are mentioning will still keep the request entry visible in the administration tab of the infocube. Can I get it out of there as well like highlighting the request and clicking the "Delete"-button (which will remove the request and delete its associated data from the cube)?
    Kind regards,
    Klemens G.

Maybe you are looking for