Request Deletion in Cube

Hello Experts
I deleted a request in the cube (Manage) as there was error in loading data,I changed the status to red and deleted it and started a new one.The new request sucessfully loaded the data but the issue is the deleted request is still there with a 'Bin' picture in the request list and the sucessfully loaded request is not avaliable for reporting.
Thanks

Hi Krishna,
The deletion would be running in background. check in SM37, if there is active job running there for this cube. check the job log for more information.
even you can check in sm12 on your logon. if threre are any lock entries, then be patient till it get cleared. the process might be runnig. you will be getting the reporting symbol once it is deleted.
Hope it clears your doubt.
Points if helpful.
with regards,
sreekanth.

Similar Messages

Request Deletion from Cube stuck in execeptional state

Hi All,
We are stuck with a strange situation caused by below steps.
1. We loaded a full request in cube
2. Next day we scheduled deletion of the request from cube
3. While deletion was in progress, we deletd the DTP through which the request was loaded
4. DTP was deleted. Now this request stuck with status 9 (deletion started) in RSBKREQUEST table.
5. If we check the request ID it shows deleted but we can see the request still in cube
6. Compression of newer requests is not happening as they are referrins issue with this stuck request
Now I am looking for below help
1. How can we delete the request from cube now
2. Is there any way to create the DTP with old technical name
3. Can we compress the request with this request in cube
Regards
Jitendra

Hi Jitendra,
1. How can we delete the request from cube now
As suggested by raman change it to red and then try deleting.Check the backend tables also system is saying its deleted then tables should not have entries for this request.
2. Is there any way to create the DTP with old technical name
I think DTP technical name is decided by system so we can not not create tech names for DTP.
3. Can we compress the request with this request in cube
Current status of you request is not green so we can not compare it.so delete it first.
Regards,
Ganesh Bothe

Compression request deletion in cube bi7

please guide me how to delete
Thanks

Read abt Selective deletion.
Re: what is the use of request reverse posting in rsmo?
Re: Selective deletion after compression
Re: Info Cube Compression
Re: how can we delete the request after compression? is it possible ?if so how?
http://help.sap.com/saphelp_nw04/helpdata/en/ca/5c7b3cbd556915e10000000a114084/frameset.htm

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

BW: Error during Delete Overalpping requests from a cube 0PCA_C01

Hello Experts
For the past 1 week, I am getting the following error in a process chain when trying to do Delete Overlapping requests from a cube.
The error I am getting is:
The chain failed while deleting the overlapping requests from 0PCA_C01 with an error messages "Error when deleting requests for comparison request" & "Deletion of request REQU_DBC7DZ51QY from data target 0PCA_C01 failed"
CL_RSDRD_REQ_PHYS_DEL:REQUEST_DELETE RSDU_FACT_REQUID_DELETE SQL-ERROR: 0
reqdel_infocube_with_aggr-0PCA_C01 CL_RSDRD_REQ_PHYS_DEL:REQUEST_DELETE RSDU_FACT_REQUID_DELETE
Deletion of request REQU_DBCFVY9N1691OYQYNCMUGCSGM(290265) from InfoCube 0PCA_C01 terminated
Error deleting request REQU_DBCFVY9N1691OYQYNCMUGCSGM from InfoCube 0PCA_C01. Exception: Unknown error
Any suggestions on how to fix this problem permanently..i mean any SAP Note to be applied or any adjusting the database tables?
Thanks
Jyothi

Hi Jyothi,
This error usually comes because of presence of zombie ./ bad request. I would suggest you to check few of the tables and search for your request "REQU_DBCFVY9N1691OYQYNCMUGCSGM" in them if you are able to find it then delete that entry from there, there after you should not face error. Check if the request mentioned above is present in the below mentioned tables? If yes delete them from there.
RSREQICODS, RSTSODS, , RSICCONT, RSODSACTREQ.
Also check if the notes mentioned in the below thread are applicable in your case?
Error when deleting requests in cube
Thanks

BW: Error during Delete Overalpping requests from a cube

Hello, I am getting the following error in a process chain for the last few days when trying to do Delete Overlapping requests from a cube. If I do a "repeat" the chain completes successfully.
The error I am getting is:
Error when deleting requests for comparison request REQU_4MNC5NXH00MJI1LRHAFV3I3BH
Deletion of request REQU_4MQ0NT0ISDRZA444OQRDBGC3X from data target ZZCCA_C11 failed
Any suggestions on how to fix this problem?
Thanks.

Hi Sam,
The job might be failing because the request might me compressed. Take the request id from the error message(for instance
REQU_4MQ0NT0ISDRZA444OQRDBGC3X here) and check whether this request is compressed in the target ZZCCA_C11 or not.
If it is compressed then the data target deletion step will fail obviously.
If this is the case then change the setting of the compression step in the PC to compress the requests loaded 15 days back or whichever you feel comfortable.
If this is not the case then please check the job log once why the deletion is failing.
Hope this helps.
Regards,
Vijay.

Unable to delete a request from a Cube which is loaded by Open hub to flat

Hi,
We have one Cube from which we are transferring data to a flat file by open hub.
the DTP for the OPEN HUB is delta DTP.
Now when i am trying to delete a request from Cube its not allowing me.
Its giving error as request is already updated to the target so delete the request from target first.
I tried deleting the open hub request entry from RSBKREQUEST table.
but still its not deleting the request from the Cube.
Can you please help me in solving this problem.
Thanks in Advance,

I think request is having datamart, which is not allowing it to delete.
You can try to reset (delete) the datamart by clicking on it in cube request and then try to delete.
Or if it does not work, you can delete it from RSICCONT table, which will delete the request from cube also.

Delete request in a cube

I have to delete a request in a cube. Unfortunately it isn't possible. I get a error message "Data target has already got request 25.445; deletion not permitted".
Do you have an idea what is wrong?
Thanks!

Hi Kiev,
You will need to delete the request from the further data target that is being loaded from this cube first, and then only can you delete the request from the cube.
Hope this helps...

Delete overlapping requests from info cube

Hello
I am getting a issue sometimes where the process chain fails to delete a request from the cube on the conditions i have given in this process type. Now i have been digging into this but cannot find much of why would this happen.
Please can someone tell me if this is a known issue to you. Also please can someone give me some details on which program name gets generated when we pull this process type in a process chain. what i mean is what is the program running for this process chain as i want to debug and see how does this process type delete the request.
thanks

check the class CL_RSSM_REQUDEL and method IF_RSPC_EXECUTE~EXECUTE

Deleting a request from a cube

Hi Experts
I deleted few(old) requests from a cube in quality server. They got deleted, after some time i checked back. Those request are appeared in the request tab with a tick mark under compression status in InfoCube. I am confused !!!
Can any you clear my doubt...
Thanks
Pavan

Hi RMK,
is it the same ID-Pavan used by you above??anyways...
I guess we are dealing here with two scenarios..
1)If it was Infocube than the solution above i suggested holds true
2)Ifs its ODS ,the physical requests are still there because you deleted the CHANGE LOG data for those requests...so now there is no WAY you can delete those request PHYSICALLY !!!
Please check to verify/confirm the same..
the only way to get rid of those contents is through the SELECTIVE DELETE for those request ..
However;even after selective delete those request would appear physically in the manage TAB of the ODS ..but if you go to the ACTIVE table content for that ODS ,the data wont be there ,its deleted.so you can reconcile the reports now.
Hope it Helps
Chetan
@CP..

Deleting request options in Cube?

Hi,
The Cube is Not Compressed where Aggregate Rollup and Compression of Aggregate rollup are available.
Now, I need to delete only one request from the Cube.
I have found two options
1) Delete this request directly from Cube (Via Manage option of RSA1)
2) Delete this request from Selective Delete option.
I need to know which is the best option in order to avoid further maintanace of already available Aggregate Rollup and its Compression. For which option Aggregate Maintanace is needed ?
Thanks
Tony
Edited by: BI Dev on Oct 24, 2008 12:35 PM

Hi......
You are saying that roll up and compression is not done........then you can easily make the QM status red........and delete the request.......
In any case if roll up is done...then at first you have to deactivate the aggregate........as already said ..........then you can only delete the request..................and if compression is done.............not possible to delete any more..........because after compression request number dos'nt exist any more....
Besides deleting entire requests, you also have the option of deleting data according to business-orientated aspects from the fact table. For example, you can delete the data for a cost center or of a customer even if these are spread over several requests.
Remember that if you delete data selectively from an InfoCube, the aggregate belonging to this InfoCube is automatically deleted...........
For you the best option is to delete the request from the target......
Hope this helps.......
Regards,
Debjani......

ABAP to Delete and Reinsert/Reconstruct Requests in a Cube

I need to write an ABAP that will selectively delete requests from a cube and then reinsert them. The purpose of this exercise is to execute a modified update rule between the DSO and the Cube.
I found FM RSSM_DELETE_REQUEST which will delete a request.
However I need the following:
1) A table that will provide the individual request numbers that I want to delete
2) A FM that will Reconstruct those requests. (There is no "RSSM_RECONSTRUCT_REQUEST) that I can find
As for #1 above, supposedly table RSREQDONE is supposed to have all the requests. However I can't find any rows in this table that provide me the request numbers in the Cube I am deleting them from.

Are you talking about selective delete and reload?
because if you need to load the data with a new/modified update rule, then i dont know if deleting the request and reinserting or reconstructing (- assuming thats what you mean) the requests will reflect or calculate the values differently based on the new update rule.
However you could do a selective delete and reload.
Selectively delete the data for whatever period/selection you require and reload it from the DSO.
Wont this solve your problem
Hope it helps
Regards
Joe

Program to delete a specific request from a Cube

Hi Everyone,
I've been trying to delete a certain DTP request from a cube but I'm unable to delete it. Is there any ABAP program to delete a specific request from a cube by provinfing requeset ID as the input.
Thanks,
Ram

HI
SE37RSSM_DELETE_REQUESTGIVE YOUR REQUEST NO & INFOCUBE NAME here. and execute.
Table is :RSBKDTP contains DTP and target details.
Hope it helps

Delete Requests of a Cube using ABAP routine

I have written a ABAP code to get all the requests of a cube. Now I want to delete all the requests which are older than 1 year through this ABAP routine. Please help.
REPORT ZTEST3.
TYPE-pools RSSM.
DATA: i_infocube like rsmonicdp-icube.
TYPES: l_req TYPE RSSM_T_PART.
DATA: li_req TYPE l_req.
CALL FUNCTION 'RSSM_ICUBE_REQUESTS_GET'
EXPORTING
i_infocube = 'ZCOPCBC02'
IMPORTING
e_t_request = li_req.

Maybe this might help :
Delete multiple requests from DSO using RSMONICDP table

Cube Request Deletion - Other loads possible or LOCK problems

Hi Folks,
can somebody tell me if there could be a lock situation if I have in one process chain the cube request deletion step running (cleaning out some request) and at the same time another load is running into the cube? We would not drop/re-create the index in load situation so no lock by the index operation.
Any experience?
From what I have seen there shouldn'T be a problem as the request deletion will be "scheduled" and simply execute if lock is release (if there is any) and the deletion it self places only a quick lock to determine the request ID but doesn't much impact other loads.
Is this all correct? Or any other views?
Thanks,
Axel

Hi,
While Loading
It is not possible to:
·        Delete data
·        Archive data
·        Delete indexes and reconstruct them
·        Reconstruct statistics
For more information:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/bb/bdd69f856a67418962d74bfd7bd8af/frameset.htm
Regards,
Anil Kumar Sharma .P

Request Deletion in Cube

Similar Messages

Maybe you are looking for