Request dependebility while transporting

Hi
I Have a doubt. I have two requests to be sent. The second request has to go only after first is transported to target system. Now If I make TOC and transport both together, will this dependability taken care?
Thanks in advance

Hello Sanjay,
Infact merging is the best approach whenever in doubt. A number of times I have 20-30 transport for which even the developer ain't sure about sequence. I simply create another workbench or customiing transport include objects of the original transports and move them. No need for transport of copies either.
Whenever in doubt about the sequence of transports or dependencies take the merger route coz SAP would take care of the versions itself.
Regards.
Ruchit.

Similar Messages

Error while transporting request to Produc

Hi Experts,
m getting an error while i transport my request to production system.request successfully got transported into quality but in production its givind following message..
"Temporary log
sapbi\sapmnt\trans\tmp\RBDR903024.RBP not found"
let me know about the cause of the error so that i can make the corrections.
Thanks in adv.
Bhavna.

Hi Aasmi Gawas,
Please could you post the error?
We don't have a crystal ball to see the errors in your system...
Best Regards,
Erick ILarraza

Error while Transporting Request

Hi All,
we have ECC 6.0 on Unix environment.
we had copied a production client with group selection, as we wanted all the three system PRD,DEV,QLT in sync.
the export was succesfully done.i copied Cofiles & Datafiles which are generated in DEV & Quality server,then i add request no in transport queue. the time when i copied transport request was not releasing from development.we checked the destination it was full so we removed the old request. then req is releasing.
after that i deleted the Cofile & datafile from OS level of DEV & QLT & trying to delete the reques from request queue. it is deleted but when im refreshing the queue its coming back in the queue.
while transporting other request its giving me error.
please help out me.

Hi Aasmi Gawas,
Please could you post the error?
We don't have a crystal ball to see the errors in your system...
Best Regards,
Erick ILarraza

Error generated while transporting a request using TMS

Dear Techies,
While transporting a request iam getting an error message
"Transport control program tp ended with error code 0247"
Errors: add to buffer has problems with data- and/or cofile
Iam not getting any information to resolve the problem. Further In devlopment system iam unable to see the old requests and also new one whcih i have created and released. I tried adding the request manually in TMS, whcih resulted in the above mentioned error.Please suggest some solution

are you able see the objects when you are expanding the request/task
Also please check the followings & let us know the result
1. Goto transaction STMS. Menu verview -> Systems. Select system and Menu Check --> All available option
2. Goto transaction STMS. Menu verview -> Transport Routes, Menu Configuration --> Check --> All option
One more thing are you facing this problem with only for one specific request or for all requests
Edited by: Mrinal Das on Jan 5, 2011 3:10 PM

Error while transporting a request

Hi,
I am transporting a request having infoobjects into a quality server.
while transporting its giving error as "Changes cannot be made,display user only".
but when i checked into Quality server changes has already been made and corresponding related objets like update rules are inactive....
so can i consider this request as successful transport??
and if transport is successful then why it is giving such kind of error,....because previously when i have transprted it never gave such error.
Thanks in advance.

Hi,
Transport is not sucessful to Quality system. you donot have sufficient authorization for transporting objects or system is locked for any changes.
contact BASIS person. and because of this infoobjects (infoobjects used inupdate rules, infoprovider...all are in deactive status).
check all objects in developement system and create new request and check request before transporting.
Regards
Daya Sagar

Error in WB Request while Transporting on STMS

Hi all,
I have a WB transport Request for my Report, where the Request contains Data Elements, Programs, SE11 Table, TMG, Screens, Tcode related to my development. Now, while moving the request from DEVELOPMENT to QUALITY system on STMS, it ended with ERROR 8.How can I know, in which object there is an Error while transporting.
My error is shown as..
Generation of Programs and Screens --- (8) Ended with errors

Dear Sekhar,
I think some object or component is missing in transport request, like function group, screen parameters or any one in your program. Activate all objects and resend dev to qas. If again same issue, you delete the request and generate new request.
Best of luck.
Regards,
Abbas.

Error occurred while transporting request no. from development to productio

Hi Experts,
I have created a zreport (having a request number ) and activate the zreport ..
While transporting this request from development to production I face the error zreport is inactive .But when I check zreport in development server it is active ..
So how to transport this request.? Please help ..

Hello,
Can you ask the basis person to check the transport log and tell as to what error has occured. Most of the time transport fails if one of the dependent object fails to move. For example you have structure that you have used for table declaration in your prog. You moved the program but the structure was not moved. When Tranported , the program will result in an error and saying Struct not present.
What you can do immediately is to go on your prodcution server and try to do a syntax check of the program. I am sure it will show some error and from that you can carry out issue resolution. Also ask the basis person to hvae a look in to ur transport(he can see the same via STMS Tcode).
Regards
Saket Sharma

Warning MSG : while Transporting a Request to Production

Hi Friends,
 I got folowing errors while transporting a Request to Production -
PART 1 .
+++++++++++++++++++++++++++++++++++++++++++++++++
 NBA Quality Assurance
 Selection for Import 03.05.2006 11:56:02 (0) Successfully Completed
 Import ABAP Dictionary Objects 04.05.2006 08:56:08 (0) Successfully Completed
 ABAP Dictionary Activation 04.05.2006 08:56:14 (4) Ended with Warning
 Import 04.05.2006 08:56:34 (0) Successfully Completed
 Check Versions 04.05.2006 08:56:47 (0) Successfully Completed
 Import steps not specific to transport request
 NBP Nobel Production System
 Selection for Import 04.05.2006 08:56:35 (0) Successfully Completed
 Import ABAP Dictionary Objects 27.06.2006 13:55:12 (0) Successfully Completed
 ABAP Dictionary Activation 27.06.2006 13:55:15 (4) Ended with Warning
 Import 27.06.2006 13:55:36 (0) Successfully Completed
 Check Versions 27.06.2006 13:55:51 (0) Successfully Completed
 Import steps not specific to transport request
++++++++++++++++++++++++++++++++++++++++++++++++++++++
PART 2 - LOG
ABAP Dictionary: Activation
Transport request___: NBDK923224
System______________: NBA
tp path : tp
Version and Release: 340.16.09 640
Program start============================================================
Mass activation
=========================================================================
Process..................: nb13_21
User.....................: DDIC
Date, time...............: 04.05.2006, 08:56:13
Platform.................: CUSTOMER-NBA(620)/DB6/AIX/nb13
Tool.....................: BATCH/RADMASG0
Log......................: F, /usr/sap/trans/tmp/NBDA923224.NBA
Program parameters:
Input medium...............: Transp. request NBDK923224
Activation method..........: Inactv.
Chk. mode..................: T
Version to be activated....: M
Versions to Be Deleted.....: Delete only active versions
Lock against paral. exec...: Shared
Independent statistics log.: being written
Parallel mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
No object to be deleted and activated exists
 =========================================================================
 Mass activation
 =========================================================================
 Process..................: nb13_21
 Return code..............: 4
 Program runtime..........: < 1 sec.
 Date, time...............: 04.05.2006, 08:56:13
 Program end==============================================================
 ABAP Dictionary: Activation
 End date and time : 20060504085614
 Ended with return code: ===> 4 <===
=========================================================================
 Mass activation
 =========================================================================
 Process..................: nb13_21
 Return code..............: 4
 Program runtime..........: < 1 sec.
 Date, time...............: 04.05.2006, 08:56:13
 Program end==============================================================
 ABAP Dictionary: Activation
 End date and time : 20060504085614
 Ended with return code: ===> 4 <===
Can any one tell me why this ? what is the impact of it ??

hi,
you must extend the log complete, than you'll see the
object, which caused the error.
RC = is only warning:
All the objects were transported successfully.
Peculiarities occurred for certain objects. These might
not have been intentional.
Example: A warning is given during a transport if the request contains an object deletion. ...
A.
Message was edited by: Andreas Mann

Error while transporting a Workbook

Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.R

Hi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat

Error while transporting webservice datasources

Hi all,
I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
But while transporting i am getting the folllowing error,
3S3T   Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Error Screen output without connection to user .
Error when activating DataSource ZANS_MASTER BI7001
Please through some light is there any predefined settings i need to do in QA system?.
Thanks in advance,
V.Sen

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error while transporting the transfermactions

hi,
i am transporting transformations dev to qty. while transporting i am getting error msg:
1) No Rules exists.
Transformation : Rules 1 could not be imported.
Transformation : Rules 2 could not be imported.
Transformation : Rules 3 could not be imported.
No fields were supplied.

Hi Shilpa Reddy
Just a quick spot it may be because of incorrect transport collection or multi modifications of transformation under a single transport .
Just replicate the data source in Target system RSA1>Source System>DS right click replicate .
and create a new transport in development system by reactivating the transformations and then release it in SE01 and then go to the Target system and go for STMS import it.
Small Note have you mapped all the info objects ,have imported the specified info objects into your target system if not then please do it and then import the transformation request.
Hope its clear a little..!
Thanks
(P159793)K M R
**Assigning points is the only way of saying thanks in SDN***
>
shilpa Reddy wrote:
> hi,
>
>
> i am transporting transformations dev to qty. while transporting i am getting error msg:
>
> 1) No Rules exists.
> Transformation : Rules 1 could not be imported.
> Transformation : Rules 2 could not be imported.
> Transformation : Rules 3 could not be imported.
>
>
> No fields were supplied.
Edited by: P159793 on Dec 30, 2008 4:55 PM

Error While Transporting Smartforms from 832 client to 834 client

Hi
I released my Smartform and Program...
and i told our basis ppl to Transport the Code from 832 to 834
but while transporting they are Getting this error
Transport Control Program tp ended with error code 0212
Errors:could not access file as supposed.
My question is
Y they r getting this error?
is it link to Abap Program..
bcz they are telling that there is a wrong in my Program...
Bt my Program is working fine in 832 client...
Can any one help me on this?

Smitha,
If you haven't done any changes in the program then there is no need but you are saying you have created error messages.Haven't you tagged the changes related to the smartform as well as the Error messages (ie message class) in the same request?
If you have different requests one for error message and one for Smartform,then see to that both are transported.If smartform is using any of those error messages then you need to move the request which has got error messages first and then only the smartform related requests should be moved otherwise it will give a dump becuase by the time Smartform is moved to 834 the error messages request is not yet moved.Hence sequnece while moving the transport requests is very important.It is always advisable to have all the changes related to a program in one request.
And added to that do check the link given by Gautam too.
K.Kiran.

Error while transporting Datasources in Production

Dear All,
I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
Such errors have occured for most of the Datasources.
Can anyone let me know
1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
2) The possible solution to correct the error.
Request your kind help to overcome this problem.
Regards
Shalabh

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error While Transporting the DSOs

Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSO, i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
The transport request contains just the DSO and not the Export datsource.I have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Can anyone please help me out with this problem.
Thanks,
Shalaka.

Hai shalaka,
jus check some points in u r transportation.
check the collection mode,grouping option - whether it is in dataflow before and after ,in data flow after,or in data flow before ,might be u have selected the in data flow before ,so the datasource error is happening here
check the datasource is from the same sap system or non sap system ,might be the system is having the password .so these are the problems check out and let me know the status of it and if it is solved by other means let me know
Suri..

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Request dependebility while transporting

Similar Messages

Maybe you are looking for