Request does not contain a certificate template extension or the CertificateTaemplate request attribute.
Hi,
Need diagnosis with the following error, please:
When I perform the steps in the link below and send the text file to my internal ca (by going to submit new request and selecting the txt file), I get the following error:
http://technet.microsoft.com/en-us/library/cc732906(v=ws.10).aspx
Hi,
Any update about the issue?
The message indicates that there is no certificate template information in the request.
However, there is no option in the Certification Authority MMC snap-in to select a certificate template.
Note Stand-alone CAs do not use certificate templates. Therefore, this issue occurs only when you use the Certification Authority MMC snap-in to request a certificate from an enterprise CA.
Please also refer to the below links to troubleshoot this issue:
http://identitybase.blogspot.in/2010/04/request-contains-no-certificate.html
http://pdconsec.net/certificates-the-request-contains-no-certificate-template.aspx
http://support.microsoft.com/kb/910249
Regards,
Yan Li
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Cataleya Li
TechNet Community Support
Similar Messages
-
Tenant public API: publishsettings does not contain a certificate
Hi
I'm trying to connect to our tenant public api, but for some reason it has stopped generating a certificate within the publishsettings file.
So when I try to import it in powershell I get the following error:
Import-WAPackPublishSettingsFile : Value cannot be null.
Parameter name: s
At line:1 char:1
+ Import-WAPackPublishSettingsFile 'C:\temp\somefile.publishsettings
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : CloseError: (:) [Import-AzurePublishSettingsFile], ArgumentNullException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.Profile.ImportAzurePublishSettingsCommand
Any help will be appreciated.
ThomasI haven't updated my blog post to reflect the latest changes with the API interaction from the Azure module, but here's how to get access to your subscription through the public API - assuming you have enabled and exposed that API through port 443 and associated
a certificate.
## Import the PublishSettingsFile you have downloaded from the tenant portal
Add-WAPackEnvironment -Name Nese2 -PublishSettingsFileUrl https://cloud.domain.com/publishsettings -ServiceEndpoint https://api.domain.com
import-WAPackPublishSettingsFile "C:\Users\Kristian\Documents\Azure\knwap.publishsettings" -Environment Demo
Get-WAPackSubscription -SubscriptionName "YourSubscriptionName"
Select-WAPackSubscription -SubscriptionId "ee5c4dad-9e74-46b8-88da-aa3300a43cad"
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com ) -
Stack file that is generated does not contain any java components
We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
++++
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: EA4
Hostname...........: wipro
Install directory..: e:/usr/sap/EA4
Upgrade directory..: F:\EHPI\java
Database...........: Oracle
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
++++++
PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter inputFile=EHPComponents.xml
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
++++++++++++++++++++++
[stack xml data: version=1.0]
[SPAM_CVERS]
ST-PI 2005_1_7000006
LSOFE 600 0015
SAP_AP 700 0015
SAP_BASIS 701 0003
SAP_ABA 701 0003
SAP_BW 701 0003
PI_BASIS 701 0003
PLMWUI 700 0002
SAP_APPL 604 0002
EA-APPL 604 0002
SAP_BS_FND 701 0002
EA-IPPE 404 0002
WEBCUIF 700 0002
INSURANCE 604 0002
FI-CA 604 0002
ERECRUIT 604 0002
ECC-DIMP 604 0002
EA-DFPS 604 0002
IS-UT 604 0002
IS-H 604 0003
EA-RETAIL 604 0002
EA-FINSERV 604 0002
IS-OIL 604 0002
IS-PRA 604 0002
IS-M 604 0002
SEM-BW 604 0002
FINBASIS 604 0002
FI-CAX 604 0002
EA-GLTRADE 604 0002
IS-CWM 604 0002
EA-PS 604 0002
IS-PS-CA 604 0002
EA-HR 604 0005
SAP_HR 604 0005
ECC-SE 604 0002
[PRDVERS]
01200314690900000432SAP ERP ENHANCE PACKAGE EHP2 FOR SAP ERP 6.0 sap.com EHP2 FOR SAP ERP 6.0 -00000000000000
01200314690900000463SAP ERP ENHANCE PACKAGE EHP4 FOR SAP ERP 6.0 sap.com EHP4 FOR SAP ERP 6.0 -00000000000000
01200615320900001296 sap.com +00000000000000
01200615320900001469SAP ERP ENHANCE PACKAGE EHP3 FOR SAP ERP 6.0 sap.com EHP3 FOR SAP ERP 6.0 -00000000000000
01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01 +00000000000000
[SWFEATURE]
1 01200615320900001296SAP ERP 2005 sap.com SAP ERP 6.0: SAP ECC Server
19 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
20 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Media
21 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
23 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
24 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
25 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
26 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
30 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
31 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
33 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
37 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
38 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
42 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
43 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
44 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
45 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
46 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
47 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
48 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
55 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
56 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
59 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
69 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
9 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
++++++++++++++++Though we have configured Java in solution manager the stack file that is generated does not contain any java components
You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
Nelis -
Document does not contain any selectable items
Respected Gurus!!!
The following error popped up while trying to capture excise invoice. The allocation was with reference to purchase order / scheduling agreement.
"Document does not contain any selectable items"
Here are the other relevant details:
1. Material has been "chapterised!!"
2. Excise details have also been maintained for the vendor.
My issue is:
Why is it that when I am trying to find the purchase order before doing a goods, this error comes up?
I wish to directly do a "capture excise invoice" without a goods receipt.
Seeking help gurus
JaideepHi,
First you have to post a goods receipt then capture & post Excise invoice using J1IEX.
Or you can post Excise invoice manual without referecne of purchase order.
But ideally you have to capture & post Excsie invoice after Goods receipt only where as only in case of Import you have to capture duties before GR through planned delivery cost using MIRO and after Godds receipt you can post the Excise invoice. -
Selected model does not contain any target value prior
Hi ODM experts,
I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
uniq_rec ID NAME A1 A2 A3 A4 A5 data
577 2052956018 NAMEHDRCP8 2.27 0.4 85.46 0.01 14.54 24-JAN-13
578 1250914484 NAMEDJDRVP3 11.45 1.24 56.24 0.01 43.77 24-JAN-13
579 1968689283 NAMEDKEND12 0.000011 6.78 0.000029 0.01 0.091 24-JAN-13
580 2063389130 NAMEDNMXG14 0.000011 0.65 36.65 0.02 0.091 24-JAN-13
unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
I'm trying to execute the following code:
drop table ALG_SET;
exec dbms_data_mining.drop_model('SVMODEL');
create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
insert into ALG_SET values ('PREP_AUTO','ON');
commit;
Begin
dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
end;
The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
Please advice what is missing or wrong and if possible how to bypass this issue.
Thanks in advance for support.
Best Regards,
BogdanHere is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
Rem
Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
Rem
Rem dmsvodem.sql
Rem
Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
Rem All rights reserved.
Rem
Rem NAME
Rem dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
Rem
Rem DESCRIPTION
Rem This script creates an anomaly detection model
Rem for data analysis and outlier identification using the
Rem one-class SVM algorithm
Rem and data in the SH (Sales History)schema in the RDBMS.
Rem
Rem NOTES
Rem
Rem
Rem MODIFIED (MM/DD/YY)
Rem amozes 01/23/12 - updates for 12c
Rem xbarr 01/10/12 - add prediction_details demo
Rem ramkrish 06/14/07 - remove commit after settings
Rem ramkrish 10/25/07 - replace deprecated get_model calls with catalog
Rem queries
Rem ktaylor 07/11/05 - minor edits to comments
Rem jcjeon 01/18/05 - add column format
Rem bmilenov 10/28/04 - bmilenov_oneclass_demo
Rem bmilenov 10/25/04 - Remove dbms_output statements
Rem bmilenov 10/22/04 - Comment revision
Rem bmilenov 10/20/04 - Created
Rem
SET serveroutput ON
SET trimspool ON
SET pages 10000
SET echo ON
-- SAMPLE PROBLEM
-- Given demographics about a set of customers that are known to have
-- an affinity card, 1) find the most atypical members of this group
-- (outlier identification), 2) discover the common demographic
-- characteristics of the most typical customers with affinity card,
-- and 3) compute how typical a given new/hypothetical customer is.
-- DATA
-- The data for this sample is composed from base tables in the SH schema
-- (See Sample Schema Documentation) and presented through a view:
-- mining_data_one_class_v
-- (See dmsh.sql for view definition).
-- BUILD THE MODEL
-- Cleanup old model with the same name (if any)
BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
EXCEPTION WHEN OTHERS THEN NULL; END;
-- PREPARE DATA
-- Automatic data preparation is used.
-- SPECIFY SETTINGS
-- Cleanup old settings table (if any)
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
EXCEPTION WHEN OTHERS THEN
NULL;
END;
-- CREATE AND POPULATE A SETTINGS TABLE
set echo off
CREATE TABLE svmo_sh_sample_settings (
setting_name VARCHAR2(30),
setting_value VARCHAR2(4000));
set echo on
BEGIN
-- Populate settings table
-- SVM needs to be selected explicitly (default classifier: Naive Bayes)
-- Examples of other possible overrides are:
-- select a different rate of outliers in the data (default 0.1)
-- (dbms_data_mining.svms_outlier_rate, ,0.05);
-- select a kernel type (default kernel: selected by the algorithm)
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
-- turn off active learning (enabled by default)
-- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
END;
-- CREATE A MODEL
-- Build a new one-class SVM Model
-- Note the NULL sprecification for target column name
BEGIN
DBMS_DATA_MINING.CREATE_MODEL(
model_name => 'SVMO_SH_Clas_sample',
mining_function => dbms_data_mining.classification,
data_table_name => 'mining_data_one_class_v',
case_id_column_name => 'cust_id',
target_column_name => NULL,
settings_table_name => 'svmo_sh_sample_settings');
END;
-- DISPLAY MODEL SETTINGS
column setting_name format a30
column setting_value format a30
SELECT setting_name, setting_value
FROM user_mining_model_settings
WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
ORDER BY setting_name; -
Load ODS - InfoObject: InfoObject does not contain alpa-conforming value
Hello everybody,
I get following error while uploading from ODS to InfoObject.
InfoObject /BIC/ZHOUSENUM does not contain alpa-conforming value 0000000000000000004.
The data flow is as follows: Transactional InfoSource -> ODS -> InfoObject.
In the Transfer Rules before ODS I have marked the Conversion check box. The data is populated into ODS without any problems.
I can even activate the ODS, which reporting enabled.
When I browse the ODS table with the option check conversion exits unmarked, I can see the value '0000000000000000004'.
But the upload into InfoObject master data failes
Any help appreciated.
TIA
pawelsap_all onboard.
I assume, this infosource is locked, due to the fact it was system generated.
On the other hand, there is a s-note 559763 which says:
If an InfoObject is filled with ALPHA exits from an R/3 System, the BW assumes that the data is to arrive in the internal ALPHA format and therefore does not convert the data.
I know, it is about R/3 as source system, but I assume the same would be for BW.
p. -
Context node does not contain any elements
Hi Masters,
I create a node dynamically from structure using CL_WD_DEMO_DYN_MODEL->create_nodeinfo_from_struct method. my code as
nd_field_info = nd_field->get_node_info( ).
wd_this->zwd_assist->create_nodeinfo_from_struct( EXPORTING
parent_info = nd_field_info
structure_name = dotablename
is_multiple = abap_true ).
When am set the data to context then it gives the error like node does not contain any elements, but i verified the attributes using nodeinfo then all attributes will be displayed, but when value inserting time it throws error.
Waiting for Your Response...
Advance Thankyou
Regards,
SathyaHi sathya ,
the method you using is absolute , the replacement for the methos is if_wd_context_node_info->add_new_child_node
pls refer the sample code to create a dynamic Node .
DATA: pa0001 TYPE REF TO cl_abap_structdescr,
comp_tab TYPE cl_abap_structdescr=>component_table,
struct_type TYPE REF TO cl_abap_structdescr,
ls_pa0001 ?= cl_abap_typedescr=>describe_by_name('P0001').
comp_tab = p0001->get_components( ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
* now the nodeinfo is created
node_info = wd_context->get_node_info( ).
node_info = node_info->add_new_child_node(
name = 'MY_NODE'
IS_MANDATORY = ABAP_true
IS_MULTIPLE = ABAP_true
STATIC_ELEMENT_RTTI = struct_type
IS_STATIC = ABAP_false
refer DEMODYNAMIC component for dynamic creation of node
regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Dec 15, 2010 2:07 PM -
The extension does not contain a valid signature
hey guys, newbie on deck!
So, after installing CS6 I ran the Adobe Update Manger. During the update the Adobe Extension Manager (AEM) fired off and began updating as well. One error I saw was:
The extension 'Adobe_Flash_Professional_Toolkit_for_CreateJS' does not contain a valid signature. The extension will not be installed.
I'm not sure what this is or what it does but I would like to:
Understand the Adobe ecosystem and
Clear any problems.
Here's what I do know:
The Mac I have is 2 days old and probably in the best shape of its life.
I installed CS6 fresh from a DVD.
Ran the Adobe Update Manager the next day (today).
I don't intend to use Flash.
If anyone can expain common causes for this behavior and a fix I would greatly appreciate it.
Thanks in advance,
TTHi JesusPresley,
The root cause is the updater updated Adobe Flash, which tried to install the extension above by Extension Manager in the installation. However, this extension was NOT signed with the updated Adobe certificate, so the extension installation will be rejected by Extension Manager. That is what you got. We have sent this issue to Flash team.
If you don't use Flash, you can manually edit C:\Program Files\Adobe\Adobe Flash CS6\XManConfig.xml, and remove the line <Data key="SupportedInSuite">CS6</Data>. Thanks.
Xiaoyi -
Certificate does not contain the correct site name
Hello,
I have to make a midlet that connect to a tomcat 5.5.9 server with ssl.
I import the certificate whit tomcat alias in the wireless toolkit but when i run the midlet this error appear: Certificate does not contain the correct site name
import java.io.*;
import javax.microedition.midlet.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
public class HelloNet extends MIDlet implements CommandListener , Runnable{
// User interface command to exit the current
// application.
private Command exitCommand = new Command("Exit",
Command.EXIT, 2);
// User interface command to issue an HTTP GET
// request.
private Command getCommand = new Command("Get",
Command.SCREEN, 1);
/// The current display object.
private Display display;
// The url to GET from the 'net.
private String url;
* Initialize the MIDlet with a handle to the
* current display.
public HelloNet() {
url = "https://127.0.0.1:8443/Hello.txt";
display = Display.getDisplay(this);
* This lifecycle method should return immediately
* to keep the dispatcher
* from hanging.
public void startApp() {
showPrompt();
* Display the main screen.
void showPrompt() {
String s = "Press Get to fetch " + url;
TextBox t = new TextBox("Http Result", s,
s.length(), 0);
t.addCommand(exitCommand);
t.addCommand(getCommand);
t.setCommandListener(this);
display.setCurrent(t);
* pauseApp signals the thread to stop by clearing
* the thread field.
* If stopped incorrectly, it will be restarted from
* scratch later.
public void pauseApp() {
* destroyApp must cleanup everything. The thread
* is signaled
* to stop and no result is produced.
* @param unconditional is a flag to indicate that
* forced shutdown
* is requested
public void destroyApp(boolean unconditional) {
* commandAction responds to commands
* @param c command to perform
* @param s Screen displayable object
public void commandAction(Command c, Displayable s) {
if (c == exitCommand) {
destroyApp(false);
notifyDestroyed();
} else if (c == getCommand) {
Thread th= new Thread (this);
th.start();
* Read the content of the page.
public void run() {
TextBox t = null;
StringBuffer b = new StringBuffer();
HttpsConnection c = null;
InputStream is = null;
try {
int len = 0;
int ch = 0;
System.out.println("Cerco di leggere");
c = (HttpsConnection)Connector.open(url);
c.setRequestMethod(HttpsConnection.GET);
is = c.openInputStream();
// length of content to be read.
len = (int) c.getLength();
if (len != -1) {
// Read exactly Content-Length bytes
for(int i=0; i<len; i++) {
if((ch = is.read()) != -1) {
b.append((char) ch);
} else {
// Read until connection is closed.
while((ch = is.read()) != -1) {
len = is.available();
b.append((char) ch);
t = new TextBox("Https Result", b.toString(),
b.length(), 0);
} catch (Exception e) {
e.printStackTrace();
String s = e.toString();
if(s != null) {
t = new TextBox("Https Error", s, s.length(),
0);
} finally {
if (is != null) {
try {
is.close();
} catch (Exception ce) { }
if (c != null) {
try {
c.close();
} catch (Exception ce) { }
display.setCurrent(t);
}re: code tags, please see http://forum.java.sun.com/help.jspa?sec=formatting.
As for the rest:
See, we now know that you used keytool to generate you certificate. You need a new certificate. This time, when keytool asks you for a first and last name, type 127.0.0.1. -
Extension does not contain valid signature
Hi all,
I open again a thread about a problem at our extension installation on several computers.
Few persons can't install our extensions. They get this message: " The extension xxx does not contain valid signature. The extension will not be installed"
Our plugins worked always since the beginning ( about December 2010 )
Our certificate is valid and has been created by TrustCenter.
I use ucf.jar with correct parameters...
I thought that's a manifest problem. So, I tried to generate plugins from Extension Builder trial version which generates manifest "automatically" but the result is the same. I also tried to get a release from a non-signed certificate ( 1024-RSA and 2048-RSA )....but unsuccessfull...
How to get a extension with valid signature for all computers ?
Thanks.
Regards.
Pierre RAFFA
Aquafadas(@harbs: already budgeted for it )
Yesterday we finalized our investigation and we now have a plan regarding the fix. Our #1 priority has been to get a working solution to customers ASAP. Here are the details:
Problem
The current implementation of Extension Manager cannot access the system root keychain on Mac 10.7.1. That is due to a particular component used by Extension Manager.
Solution
Stage 1:
We will make a manual fix available by Friday 10/28 morning Pacific time. The fix will be a .swf that end-users should download and manually replace the Extension Manager .swf on their machines. After they replace the .swf, they can go ahead and install extensions using Extension Manager. This will only apply to users who are on Mac 10.7+. In addition, your users should be running Extension Manager CS5 or CS5.5 and should download the latest update through Adobe Update Manager if they haven't done so already.
I understand that this is not optimal user experience but it is the fastest solution that we can make available.
We will post the .swf and detailed instructions on this forum thread.
Stage 2:
We are already working on an update to Extension Manager that will be available through Adobe Update Manager in mid November. The update will work even if some of your users have replaced the Extension Manager .swf on Stage 1 above (ie it will overwrite the fix from Stage 1). Only users that face this problem will be notified to download the update.
Note 1: Doing the manual fix is not necessary. You could still wait until the AUM update is available.
Note 2: The fix we do in Stage 1 is different than the one we'll do for Stage 2.
Note 3: No update is necessary for CS Extension Builder or the CS SDK.
Please let me know if you have any questions or concerns.
Thank you again for helping us in discovering and solving this issue and your understanding as we drive to a solution. I will keep you all posted as news develops.
gabriel tavridis
product manager
Message was edited by: PECourtejoie (corrected date) -
BI Publisher Word Template The report does not contain any data fields.
I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please helpHi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks -
Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13 -
Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code -
The Adobe Exchange Download page has an old version of Adobe Extension Manager that fails on Mac OS Mountain Lion and later. Anyone who attempts to download Extension Manager gets this old version, 5.5.0.163.
BAD - http://www.adobe.com/exchange/em_download/em55_download.html
Version 5.5.3 is available from the following link, but Adobe search and download page link to the exchange download, not this link.
http://download.macromedia.com/pub/dw_exchange/extension_manager/mac/AdobeExtensionManager _5_5_3_mul_AdobeUpdate.dmg
Adobe, Please update the link so that we can a little more easily download a version that doesn't show the misleading error "The Extension does not contain a valid signature. The extension will not be installed".Sorry for that. We listed the old version in that page because the latest 5.5.3 patch can be installed ONLY AFTER you have installed the old version. Actually you can find the product updates at http://www.adobe.com/downloads/updates/. Also you can launch Adobe Application Manager or Creative Cloud app to learn which products are updatable and update them if necessary.
-
InfoObject REQUESTER does not contain alpa-conforming value 1006152
Hello All,
I am trying to load data into ODS.
The load is failing at "Data Package 6" Record # 11140. I am getting following message at the failed record. -
"InfoObject REQUESTER does not contain alpa-conforming value 1006152".
I went ahead and checked this record # 11140, in PSA, in Package # 6. There the requester field is populated with "1006152" where it is expecting "Some description".
I went ahead and changed the START_ROUTINE. with
LOOP AT DATA_PACKAGE.
IF NOT DATA_PACKAGE-REQUESTER cs 'S'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
Expecting that these erroneous records will be removed and will get a successful load.
I am getting the same error message at the same record # and data-package number.
Any help is highly appreciated.
Thanks,
PK.Hi
when u r having such a problem of Alpha numerical error in a particular for a particular record.Then u just write a Fomula into that Particular formula USE {TOUPPERCASE(REQUESTER)} & thenn reload to the Target...this will solve the problem...to my knowledge..
try this..
HOPE THIS HELPS
THNX
BI Learner.
Maybe you are looking for
-
Report with goods supplier data
Hi Gurus, Any standard report with purchase orders showing also general data of the goods supplier including number, name, address? Regards, Alberto
-
I am exposing session beans as web services. My question is how can I use a user defined object as a parameter in the client. The scenario is like this. I invoke a method on an EJB through Webservice A and and it returns me an object of type let's sa
-
Hi, I have purchased Adobe Acrobat 9 and have the serial # for re-install, however after downloading Acrobat 9 it says that my serial # is invalid. What am i doing wrong? Should i install the trial version and update from there?
-
IPad 1 Gen. With 5.1.1 its Running very Bad
I have a iPad 1 Gen. With the 5.1.1 iOS and its Running very Bad , restarts and Black Screen is comming so much That i Cant use the iPad normal :( what can i do.? I try to downgrade but Iam Not abble to fix ist to 4.0 or 5.0 :(
-
Cfdocument - CF8 hotfix expected?
Ok, so I understand that Adobe has installed some type of fix on thier systems to rectify the problems of scaling with the <cfdocument> tag. A poster from Adobe sent a response to me that he couldn't see the problems I was having becuase he had the "