Request end must be later than req start date

Request end date must be later than request start date
Any explaination, what configuration I need to carry on to clear the issue
Regards,
Ajay

Hi,
I am also getting same error while I create a new service request. I have assigned the date rule for both start date and end date. Request start date is today's date and end date is today's date+3 days. i can see the dates on screen, but still when I save I am getting Requested end date must be later than requested start date. Please let me know am I missing something here.
Regards,
Reddy

Similar Messages

  • The determined activity date 03/24/2009 must be later than the system date

    Hello everyone!
    I am creating a contract but this error message appears when I put a validity date: "The determined activity date 03/24/2009 must be later than the system date". Where in IMG can I adjust this? Thank you.

    no one responded.

  • Requested end date must be later than requested start date

    Hi,
    I am getting an error after the creating the support ticket as "Requested end date must be later than requested start date".
    Please advise the solution.
    Regards,
    Rajesh Kumar.R

    Hi Raj,
    If you look for this message in DEBUG, youu2019ll find, that it is raised in functional module CRM_DATES_SERVICE_IR. That FM is called if your date type equals to constants GC_APPOINTMENT_TYPE-SRV_CUST_BEG (SRV_CUST_BEG) or GC_APPOINTMENT_TYPE-SRV_CUST_END (SRV_CUST_END).
    So, I can say that itu2019s some kind of standard check inside CRM core, and you canu2019t turn it off.
    And the workaround variants are listed earlier:
    -     You can fill the date SRV_CUST_END with some rule as Mohammed has suggested (even with dumb ISM_INFINITE which will put 31.12.9999 and it will be obvious that user didnu2019t change it)
    -     You can move to Z* date types, like you said, and checku2019s wonu2019t run
    -     And finally, you can try to delete this error message using BADI method CRM_APPT_CHECK_DEPENDENCIES, CRM_APPOINTMENT_BADI (as I remember it runs after this standard check). But I wouldnu2019t recommend doing it, because CRM_DATES_SERVICE_IR could be called not only in this moment and errors could appear in random placesu2026
    Best Regards,
    Vadim Shmarin

  • IRecruitment  Candidate Date To must be later than or equal to Date From.

    Dear All,
    When I am updating any field in personal information in on my Account page in IrcVisitor.jsp as external user the system gives me error "Date To must be later than or equal to Date From."
    We are working on 11i apps.
    Please reply...

    1. Bounce Apache, clear cache and check that the issue is still there. When you bounce apache, make sure to bounce the external tier also if it's a separate server.
    2. Check that the flexfield you have personalized is the right one. Simple check is to remove a segment from the list, come back to the page and choose the country for which you removed the segment.
    3. If both the above don't help, please post the name of the item you are personalizing, the page and the flex segments list.

  • Nokia E72: "alarm set for later than entry starts"...

    Hi,
    I have bought recently a E72 nokia.
    It replaced my old E50 ...
    I have used a lot the "To Do" calendar entry feature to plan some actions on my old E50 Nokia.
    I was not well impressed by the E72 "To Do" because if I'd like to re-schedule the ToDo entry I cannot do it and I'm receivieng all the time the "alarm set for later than entry starts" error.
    It is crazy because I cannot do anything but just close everything ... abd go to the default screen.
    Is this a bug or it is a bad "feature" of the new Nokia E72 ?
    How can I re-schedule a "To Do" ?
    Is there a different understanding from software point of view between E50 "To Do" and E72 "To Do "?
    Thank you for support.

    I do experience the same issue with my TODO in Nokia E72. NOKIA are you listening here?

  • Production finish date is later than order finish date?

    In my company, most of the plan orders in MD04 have an exception message "64 Production finish date is later than order finish date". The plan strategy of the materials are 40. The plan orders are created from Scheduling Agreements or Independent Requirements.  We set 'Scheduling' as 2(lead time) in the MD01/MD02. The self-production time in material master data is 0. The schedule margin code is 000 which all the parameters are 0.
    For a example, we create a requirement on 2007.04.24. After MRP run, plan order generate. It's basic date will be 2007.04.24, but the production date IS 2007.04.25. All the plan order like that, the production date are always later than the basic date for one day.
    Could someone tell me why? and how to settle this problem?
    Thank you in advance!

    Hi,
    check scheduling parameters for planned orders and scheduling parameters
    for production orders.In that set the various indicators like
    adjust basic dates to order start date
    do not adjust basic dates to order start dates and try.
    Tcode opu3 / opu5
    Thanks,
    s.nandhakumar

  • The activity procedure date must be larger than the system date in VA42

    Please Help me...... I am trying to update the Contract End Date in VA42 but it is not updating and through an error message
    ''The activity procedure date must be larger than the system date''
    please help me to solve the issue....
    Thanks & Regards
    Shakeel

    Shakeel Ahmed Mohammed
    Please update how you solved so that it will be helpful to others who face similar issue.
    G. Lakshmipathi

  • Requested end date must be later than requested start date in Service Request

    Hello Experts
                          I am getting this error in the service request when the date displayed in UI is
    Requested start date-06.05.2014
    Requested End-08.05.2014
    I have searched this error in the SCN, many people  have posted this error . I have not got any satisfactory answer in the posts. I am attaching screenshot in the post.
    I am configuring the service request.Please reply as its urgent
    Thanks all of experts in advance

    Hello Ashik
    I am facing a new problem please help
    I am currently working on service request.I am facing a problem in the date management there.In my service request i have 5 statuses .One of my status is "Pending with consumer".I am using duration settings of service request.By duration settings , i am calculating the duration for which its pending with consumer.I am having 2 response profile one is 24*7 and other is having 9 working hours.In the service request from the SLA configuration i am calculating the escalation date & Time .I need to add the pending with consumer duration with the escalation date and time.I am facing a problem , i am explaining whole problem ..
    Let say if the pending with consumer duration is  1440 minutes(that is 24 hours) .I am adding the minutes to the escalation date through the date rule.
    I am facing problem that if the service profile is 24*7 then there is no problem but if it is having the 9 hours working service profile then after adding the minutes to it the escalation date is changing to 4 days ahead which is wrong.
    I need to add only those minutes for which it is pending with consumer in working hours for the 9 hours service profile
    I need to dynamically determine the working hours from the duration then add it to escalation dates when the status is changed from pending with consumer.
    Please suggest a badi will work or how to do it.Its urgent as i need to give demo.I will appreciate a quick reply.Please reply

  • Get entries later than a given date

    Hello,
    I'm trying to implement a method wich will return me the entries from the service where the createdAt field is greater than the given Date. So i done this:
    Timestamp timeDay = new Timestamp(2008, 5, 1, 0, 0, 0, 0);
    try{
            nameFilter = new QueryFilter(name);
            dateFilter = new QueryFilter(timeDay, ">=");
            list = local.findByNameAndCreatedAt(dateFilter, nameFilter);
    In the Service Browser I can see an Entrie with the Value
    2008-05-08T12:49:50.380
    So it must return me an result, but it doesn't, just an empty List. What am I doing wrong?
    Greetings
    Christoph König

    The Problem was, that I generated the Timestamp from util.Date. when i create the timestamp for a GregorianCalender it works

  • Basic finish date earlier than basic start date while backward scheduling

    I am encountering an issue where in when I am selecting backward scheduling for a process order and I am entering the Basic finish date, afte which system is giving me a Basic startdate which is after the basic finish date.
    For eg:- When i give the basic finish date as 08.12.2011, system is giving me basic start date as 09.12.2011
    I have checked the recipe of the material. In the recipe one major flaw that i found out was that all the activity timings were maintained as 0. But when i created a similar scenario in the testing client, i am not getting the issue.
    Please help.

    Hi,
    Check what is maintawined in number of days the start day is allowed to be in the past in scheduling parameters of the order type, in OPU3. If there is an opening float defined in schedule margin key of the order, and concerning this float backward scheduling finds a start date which falls into past, lead time scheduling will automatically switch to forward scheduling starting from today. 9.12.2011 could have been deducted this way. Also check the factory calendar if days upto 9.12.2011 are defined as working days.
    Regards.

  • Tasks sync error: "alarm set for later than entry ...

    I upgraded the firmware on my E71 to the latest version. Since then syncing my tasks with Outlook 2007 has been a battle. The main problem is that once syncronised and older than 24 hours, I no longer can edit the tass on my mobile; only within Outlook. I get a "alarm set for later than entry starts" error on my E71. I have reformatted the phone, restored the data, deleted all calendar entries in the phone - resync with Outlook, but the problem persist. I also get duplicate entries at time or entries which do not sync in both directions. This messed up most of my tasks. PLEASE HELP.

    I do experience the same issue with my TODO in Nokia E72. NOKIA are you listening here?

  • Earlier date in finish date field than the forecast start date (in Proj def

    Hi Experts
    I have foreast start and forecast finish dates maintained in Project definition. N dates in WBS elements.
    However I am able to maintain an earlier date (than forecast start date) in Finish Date field in PD.
    I believe there should be a  validation with dates.
    Please provide clues.
    Warm regards
    ramSiva

    Hi,
    Please create a validation rule with all prerequisites, check and message .Assign it to the project profile. For the running project , open the project in CJ20N ,--> Edit -->Validation and select this validation for the system to respond appropriately.
    Warm regards,
    Srinivas Potluri

  • Calculating Remain Finish Date/ Remain Start Date

    Problem:
    I have an issue where I can't change the finish date because the following error message: Remain Finish date cannot be earlier than Remain Start Date.
    I want to change end date to Jan 25 but it keeps calculating/inputting Feb. 18
    Observed:
    All the Predecessor for this activity and the activity start date have been Actualized (December 21 or December 12). I do notice that Early Start for this activity is Feb. 18.
    I tried modifying the Duration: "remaining" and "at complete". I kept "remaining" at 0d; which keeps the date to Feb. 18; however, the "at complete" also gave me an same error message as above.
    Questions:
    1.) How do they calculate Remain Finish Date/Remain Start Date?
    2.) From my observation, my assumption is that early start is causing the calculation of Remain Start Date to stay at Feb. 18. If my assumption is correct, what do I need to push it back to mid-January?
    3.) What should I do?

    The early start of Feb 18th means either a constraint or another acitivity is pushing it out the start to Feb 18th (or you data date is set there).
    Check to see if there are any constraints on the activity.
    Even though you say the predecessors are actualized, running with retainined logic will cause any acitivities to push out if ANY predesessors are not statused. You will need to look at the predecessors of the predecessors (in some cases all the way back to the first activity).
    You can fix this by breaking the links to the non-finished predecessors or by changing the retained logic setting to progress override in the schedule options menu. This is usually not recommended and can cause unrealistic schedules.
    Try and find an activity that ends on Feb 17th. More than likely this activity will be tied to the one you want to change.

  • Camel Query : Calender list : Get Items agains given date that must be greater than and eqaul to start date and greater less than or equal to end date ?

    Camel Query : Calender list : Get Items agains given date that must be greater than and eqaul to start date and greater less than or equal to end date ?
    A Snap of Employee holiday list
    Case : Anne juul Sondergaar is on leave from 05-06-2014 to 07-06-2014
    I need a query to check wheither Anne juul is on leave at 06-06-2014 ????
    I am using this query that return nothing
    SPQueryquery =
    newSPQuery();
                                query.Query =
    @"<Where>
    <And>
    <And>
    <Leq>
    <FieldRef Name='Til' />
    <Value Type='DateTime'>"
    + WorkingStartDate.ToString("yyyy-MM-dd")
    + @"</Value>
    </Leq>
    <Geq>
    <FieldRef Name='Fra' />
    <Value Type='DateTime'>"
    + WorkingStartDate.ToString("yyyy-MM-dd")
    + @"</Value>
    </Geq>
    </And>
    <Eq>
    <FieldRef Name='Medarbejdere' />
    <Value Type='Lookup'>"
    + EmployeeName.Trim() +
    @"</Value>
    </Eq>
    </And>
    </Where>"
                                query.ViewFields =
    " <FieldRef Name='ID' />";
    Ahsan Ranjha

    Hello,
    Download CAML query builder from below location and use it to build your query:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f7b36ebc-6142-404a-8b04-9c87de272871/where-can-i-download-the-u2u-caml-query-builder-for-sharepoint-2010may-i-know-the-exact-link?forum=sharepointgeneralprevious
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Comparing dates (Start date should not be later than End date etc ...)

    Hello All,
      I have a table (5 rows) with 7 columns. Of which the first to columns are the start date and the end date. Can someone kindly advise on how I can go about to ensure that there is some validation mechanism in place such that the start date is not later than the end date and vice versa ? Thank you very much.
    from
    Kwok Wei

    Hi
      Use calculated attributes as Pran suggested. It should work. Where are you getting the data from. Is it from R/3. The node bound to the table ui element is it a model node. Anyway Here is the link on how to use the calculated attribute.
    http://help.sap.com/saphelp_nw04/helpdata/en/7f/a0384162316532e10000000a1550b0/frameset.htm
    regards
    ravi

Maybe you are looking for

  • [SCORE] How to make an unfinished bar at the beginning of a song?

    I'm working on a song and I'm trying to get the score right. The song has an unfinished bar in the beginning; the song is in 4/4 but the very first note starts at the 4th count of the first bar. In the score, Logic automatically puts in a breve rest

  • In F-53, the Withholding tax line item is not geting calulated

    Hi All I have created a tax code for payment. while making payment through F-53, i dont see a sepreate line item getting created for for Tax(Withholding) When i double click on the vendor line item and check on the Withholding tax option box, its sho

  • Assigning object of one class to object of another class.

    Hi, How will i assign an object of one class to an object of another class? Ex: ClassX A=some_method(); Now how will I assign the object A of class ClassX to the object 'B' of another class 'ClassY'.

  • HP Photosmart C3135 "Not Printing right with Gimp-print for p1000"

    Hi I am having trouble using my HP PhotoSmart C3135. First I will explain how it is set up. Wireless Setting's for Macbook - Mac 10.4.8 HP Photosmart C3135 - Connection "bonjour" Print using "HP Photosmart P100 - Gimp-Print v5.0.0-beta2 Wireless Sett

  • Extract a zip file

    I have a program that includes a set of around 50 photos.  I have zipped those files and included them in my build.  Now I'd like to extract those photos to a folder during the installation process.  I've reviewed the application builder, but can fin