Request Failure on IASr2 startup on W2k.

I am having problems restarting IASr2 on W2k. Before I shut down the machine, I do the Stop HTTP server 2, Stop HTTP Server 1, Alter System Checkpoint, and then I go into W2k services and shutdown IASDB(no errors)...
When I reboot and do the Start HTTP server 1 or 2, I am getting this error:"Request failure -- 0 of 3 processes started." or sometimes "...1 of 4 processes started".
My only solution right now is to restore from a coldbackup, and then re-apply my work and the data.
Why can't IASr2 tolerate a simple planned reboot of W2k? I thought it was supposed to be a high-availability product. This is a pristine install per Oracle install procedures.
Any ideas?

Dear sandeepchoudhary21,
thank you for you explanation, but this is the output
Build Type....................................... DATA + WPS
so do i have to enable data encrytion on dtls license ?
http://www.cisco.com/en/US/docs/wireless/controller/5700/software/release/3se/lwap/configuration_guide/b_ap-config_32se_5700_cg_chapter_011.html
thank you very much

Similar Messages

  • After Effects can't continue: unexpected failure during application startup

    Im running 10.10, Mac OSX, it was running fine before a minor update came out, and now I can not open AE CS6. I have uninstalled, reinstalled it, installed the trial of CC 2014. No messages beside "After Effects can’t continue: unexpected failure during application startup" come up.
    System log:
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
                Call location:
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 0   CarbonCore                          0x00007fff82bb637d ___Gestalt_SystemVersion_block_invoke + 113
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 1   libdispatch.dylib                   0x00007fff8bf70fa2 _dispatch_client_callout + 8
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 2   libdispatch.dylib                   0x00007fff8bf70f00 dispatch_once_f + 79
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 3   CarbonCore                          0x00007fff82b5e932 _Gestalt_SystemVersion + 987
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 4   CarbonCore                          0x00007fff82b5e51f Gestalt + 144
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 5   AdobeCrashDaemon                    0x0000000100002e69 -[MyDaemon GetOSVersionMajor] + 33
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 6   AdobeCrashDaemon                    0x0000000100002d4a -[MyDaemon isRunningOnLeopard] + 25

    Well, looks like a bug in Yosemite. You might wanan read the pertinent announcements, anyway. At this point Adobe apps are not compatible with OSX 10.10.
    Mylenium

  • ISE Alarm : Critical : Profiler SNMP Request Failure : Server

    Ok, so this alarm is coming in repeatedly and is now on my projects list.  I get email alerts from the server that list thr NAD IP as the endpoint device and the Endpoint IP address is correct.  I've checked the settings and the endpoint is not listed as a NAD in ISE (ver 1.2).
    Profiler SNMP Request Failure
    Details :
    Profiler SNMP Request Failure : Server=xxx-xxx-xxx; NAD Address=10.253.124.194; Endpoint IP Address=10.253.124.194
    Description :
    SNMP request times out, or SNMP community/user auth data is incorrect.
    Suggested Actions :
    Please ensure if SNMP is running on the NAD and verify that SNMP configuration on ISE matches on NAD
    *** This message is generated by Cisco Identity Services Engine (ISE) ***
    Has anyone seen this come in before?
    PS - Why is the IOS for ISE so cut down?  Looks like something you would get from an Apple product.
    Thanks,
    Clark

    Hello,
    Please follow below CiscoLink:
    http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_mnt.html
    Profiler SNMP Request Failure
    Either the SNMP request timed out or the SNMP community or user authentication data is incorrect.
    Ensure that SNMP is running on the NAD and verify that SNMP configuration on Cisco ISE matches with NAD.
    Also ensure what snmp version device is using.
    Thanks,

  • Notify via email upon concurrent request failure

    Hi,
    I would like suggestions on the best way to solve the problem of being able to notify user(s) via email upon the failure of a concurrent request. Apps has the built-in ability to notify upon completion, not just upon failure. I want to limit the need for any user/passwd info being exchanged.
    So far, my best bet I think is a dbms_job.
    Any suggestions other than writing a shell script to login to the database and check on fnd_concurrent_requests?
    Seems like this would be a good feature to add for Apps.

    All you need is to create a trigger as below
    CREATE OR REPLACE TRIGGER sgldba.sgl_concurrent_request_status
    after insert or update on apps.fnd_concurrent_requests
    for each row
    WHEN (new.status_code in ('E','G','T'))
    begin
    insert into sgldba.sgl_concurrent_request_track values (
    :new.request_id,
    :new.status_code,
    :new.actual_start_date,
    :new.actual_completion_date);
    end sgl_concurrent_request_status;
    I am having the trigger to update a table sgldba.sgl_concurrent_request_track with the request_id , status_code , actual start date , actual completion date .
    You can proceed further by adding addition information to the trigger like sending mail
    Regards

  • Why is iTunes (10.6.1) requesting my password at startup?

    iTunes has suddenly begun asking for my password at startup of my Mac (running OS 10.6.8). And if my iPad2 is in its dock, the password is requested a second time. I have refrained from entering the password because I suspected a possible security breach. iTunes never behaved this way until a couple of days ago. Today when I tried to install the latest iTunes update (10.6.3), the process stopped after about 98% of the download and reported an error. I have tried Software Update three more times, with the same result. Anyone know what is going on with the password requests, or with the persistent update error?

    Regarding your questions about the password requests: I have never used Match. I have an active account with iTunes which I've used for several years to purchase many $$$ of music, video, iOS apps and OS X apps and movies on my Apple TV 2. I have an iPad 2 which I usually keep docked when I'm at my desktop Mac. Just a couple of days ago iTunes began requesting my password twice every time I started the app. (I assume the second request has something to do with the iPad, because when it was not docked I only saw one password request.) I had no pending purchases that I was aware of. Last night I surrendered and provided the password to both dialogs, and today there have been no requests. I'm wondering if I just gave my password to an online criminal, or was this episode something Apple initiated as a security check, or was it a glitch? Whatever, the nagging has now stopped.

  • How to fix windows 7 startup failure? Windows startup repair cannot help

    Recently, my laptop have problem with the startup and unfortunately it is showing crash dump error as well.
    This is the error mesage for startup issues: c000021a fatal system error, intial session process or system process terminate
    and this is error message for crash dump: STOP: 0x0000000A (0xFFFFF80003BEDE60, 0x0000000000000002, 0x0000000000000008, 0xFFFFF80003BEDE60)
    So, when i start my laptop it comes up with the startup c000021a fatal system error. I tried to go to startup repair and chose the "Last Known Good Configuration (advanced)" after that it shown system crash dump error message.
    Unfortunately, I did not make the restore point. I want to reinstall my windows but it cant boot from CD/DVD due to startup failure. I already choose the booting sequence to CD/DVD as first sequences but it still does not work.
    Anyone can help me with this issues?
     

    Hi Arie K,
    Please explain a bit about the following question for better analyzation:
    1. What changes have you made before this issue?
    2. Do you receive the same error message when we use the normal boot, safe mode and Last Known Good Configuration? If no please share it with us.
    3. What error messages do you receive when we try to boot from CD/DVD?
    We could try to use the USB driver to performance the system restore or reinstall.
    For more information, please refer to the following article.
    How to Build a Bootable USB Drive? or How to Install an Operating System from a USB Device?
    http://blogs.technet.com/b/chenley/archive/2011/10/06/how-to-build-a-bootable-usb-drive-or-how-to-install-an-operating-system-from-a-usb-device.aspx
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • SPML Modify Request failure

    Hi,
    I am trying to trigger a SPML Modify request with the modification mode as Add.
    But it always returns failure with an IAM # . No specifc reason as such.
    Can any tell me as how the request identifies the User for the which the modify needs to apply , Is it purely based on PSO ID? I tried passing in the PSO Id as identity:orclguid
    What is the value we need to pass for PSO id?

    Hi ,
    I use the OOTB SPML I suppose , I am totally new to this IDM .
    We are using OIM 11g .
    We have an usecase to create user and assign role to user from an externall application into OID , for this we are using the SPML webservice.
    SPML takes the PSO Id to identify the user , So I am not able to find the attribute which I could pass on.
    More over basic question , any resource I am created from SPML webservice , it creates a request in OIM and I am not sure how I can see the same in ODSM, So is this done by connectors and we need to have anconfiguration or mapping that needs to take care of the same?
    So using SPML is the right approach to provision users to OID (create User,Grant Role to User)
    I also do not see any Distingushed Name attribute in OIM , How wil the users i create using SPML go to the exact subtree I wish to insert. I am not able to find any docs which can help me , all the docs seems to be very generic
    Thanks,
    Robin

  • IMac and power failure, now new startup screen and abrupt shutoff

    Had a power failure, iMac kept turning on and off, finally unplugged and after 8 hours, I try to start and I get a screen that has the apple logo and spinning load animation, but also a new bar that shows something is being worked on. It reaches the end and abruptly shuts off.

    What version of OS X was your Mac running?

  • Safe to retry Flex Web Service calls on HTTP request failures?

    I'm using Flex's web services layer to make SOAP calls to a back-end server. Once in a while, those calls fail with a generic RPC fault that looks like this:
    faultString="HTTP request error"
    faultCode="Server.Error.Request"
    faultDetail="Error #2032: Stream Error..."
    When this happens, is it safe to assume that the server didn't get the message and retry an otherwise non-idempotent request?

    Anyone have any ideas?

  • Transport request failure:-Webservice datsource activation

    Hello,
    The transport request for Web service Datasource activation fails....with the following error in the transport log
    "Screen output without connection to user .
    Error when activating DataSource DS_SUBCOMPDET GPU_WBSRV"
    Please guide regarding the Web service Source system creation,
    I have followed the following process to create the Web service Source system
    Do I have to maintain any connection parameters RFC/userid/password etc....???
    Creating Web Service Source Systems
    1. In the source system tree in the Data Warehousing Workbench, choose Create in the context menu for Web Service.
    2. In the Logical System Name field, enter a technical name for the source system.
    3. Enter a description for the source system.
    4. In the Type and Release field, enter the type of source from a semantic perspective
    The datasource is present in Modified version and not ready to get activated no matter what...with other transport requests...
    kindly provide you inputs its urgent....
    - Amit

    Hi,
    1) I have not included the fucntion module as it is auto generated by the target system.
    2) Error log
    Screen output without connection to user .
    Message no. RSAR051
      Saving Objects with Type DataSource
      Internal Activation (DataSource )
      Preprocessing / Creation of DDIC Objects for DataSource DS_SUBCOMPDET GPU_WBSRV
      Save DDIC object /BIC/CADS_SUBC000020000001 (Application Structure for DS_SUBCOMPDET GPU_WBSRV)
      Save DDIC object /BIC/WCADS_SUBC000020000001 (Application Structure for DS_SUBCOMPDET GPU_WBSRV)
      Save DDIC object /BIC/CADS_SUBC00002000 (Segment Structure for DS_SUBCOMPDET GPU_WBSRV - Ap)
      Save DDIC object /BIC/CCDS_SUBC000020000001 (Character Structure for DS_SUBCOMPDET GPU_WBSRV)
      Save DDIC object /BIC/WCCDS_SUBC000020000001 (Character Structure for DS_SUBCOMPDET GPU_WBSRV -)
      Save DDIC object /BIC/CCDS_SUBC00002000 (Segment Structure for DS_SUBCOMPDET GPU_WBSRV - Ch)
      Save DDIC object /BIC/B0007633 (PSA for DS_SUBCOMPDET GPU_WBSRV Segment 0001)
      Activate all Dictionary objects ( 9 ):
      All DDIC objects have been activated / deleted
      Post Processing/Checking the Activation for DataSource DS_SUBCOMPDET GPU_WBSRV
      Generate program for code ID 49GH5LEH6WBIDOMC52AX9O613
      Generating access method WEBS_PUSH...
      Generation of conversion exits and PSA update...
      Screen output without connection to user .
      *Error when activating DataSource DSSUBCOMPDET GPU_WBSRV*_
      Deletion of Unused Dictionary Objects ( 9)
      All DDIC objects have been activated / deleted
      Deletion of Object Catalog Entries (TADIR)
      Object TABL /BIC/CADS_SUBC000020000001 deleted from TADIR
      Object TTYP /BIC/WCADS_SUBC000020000001 deleted from TADIR
      Object TABL /BIC/CADS_SUBC00002000 deleted from TADIR
      Object TABL /BIC/CCDS_SUBC000020000001 deleted from TADIR
      Object TTYP /BIC/WCCDS_SUBC000020000001 deleted from TADIR
      Object TABL /BIC/CCDS_SUBC00002000 deleted from TADIR
      Object TABL /BIC/CQDS_SUBC000020000001 deleted from TADIR
      Object TABL /BIC/CQDS_SUBC00002000 deleted from TADIR
      Object TTYP /BIC/WCQDS_SUBC00002000 deleted from TADIR

  • Application Failure Launch on startup

    The application "processd " could not be launched because of a shared library error: "(<main><CarbonLib><CFMPriv_CarbonSound>"
    This started popping up on my iMac G3 every startup. Has anyone experienced this before?
    Thanks

    I was able to find some left over apps that I removed and took care of this.

  • Failure in macbook startup.

    I had issues with login on my macbook (running OS X 10.4), in that it would log me in, show me the desktop and then go straight back to the log in box. So it got stuck in a loop.
    I tried repairing the disk utilities to fix that problem, using the mac disc that came with my computer, and it showed that there were no issues. When i turned it back on I got this message on a black text only screen:
    launchd: com.apple.nibindd: exited abnormally: bad system call
    launchd: com.apple.nibindd: respawning too quickly! throttling
    launchd: com.apple.nibindd: 6 more failures in 60 seconds will cause job removal
    launchd: com.apple.nibindd:: will restart in 10 seconds
    and it'll keep doing that, untill it's done it 10 times, and then it'll say local host has no name! or something like that. Sometimes, it'll say this message:
    localhost:/ root# (date and time) launchd: com.apple.KernelEventAgent: exited abnormally: bad system call
    or this
    launchd: com.apple.mDNSResponder: exited abnormally: Bad system call
    and repeat the same process.
    I've done fsck checks and didn't find anything. Disk utility didn't find anything. I've tried to archive and install, but it tells me that i can't install from the disc. It'll boot up fine in safe mode.
    Any suggestions on what i could do ?
    Thanks

    Hi Harriet, and a warm welcome to the forums!
    It'll boot up fine in safe mode.
    It could mean that you have some Hardware failure, or it might be 3rd party things, or just corruption.
    In Safe Mode try making a new Admin Account & log into that one for a test.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
    Reboot, test again.
    If it only does it in Regular Boot, then it could be 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check System Preferences, the Other row for possibilities.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • BI Transport Request Failure

    Hi,
    I have created a transport request to install business content- A SRM Report. The transport request failed. I am unable to understand whether the report has been installed properly or not. Can i re install the Query? Can i delete the transport request and create new one and try to assign the new transport request to the query while installing it newly? Please suggest me reagrding the same.
    Thankyou.

    Hi There,
    Just check the log of errorneus Request.
    Try to find out which element is missing.
    then
    Just Go to Se16 Table Name RSZELTDIR
    in that mention the missing Object Namein ID field, Execute, you will get the Object description which needs to be transported first, create a new request add that missing object and then transport that Object with Grouping Option necessary.
    and then again transport your previous request.
    Regards,
    Rajdeep Rane,

  • Transport request failure

    My BEx request failed with errors while moving to Q.
    I just want to collect those queries again and make sure all their elements are captured.
    How do I do that?
    Once I have moved the queries with new request to Q,  Will I have to include the old request when i move the new one to P ??

    Hi Fran,
    U can just collect the query all over again in the RSA1 > Transport connection  > Query Elements and Transport the request to the Q .
    The other thing u can do is check the log of the failed Transport , check what is the error code  ( if it is 8 )
    Then copy the Query Element . It will be something like this
    Error when activating element YUEXQB2XXZCQ3VWRGX8JMEFQ  
    Element 3YUEZ6KZZFQ0HI8WH2USYZNVA is missing in version M
    If this is the case then u can goto SE16 and check in this table RSZELTDIR and search for what object is missing and u can collect that and send to Q.
    Hope this Helps

  • Help with JDPA failure on JVM Startup from C++ using JNI_CreateJavaVM

    The short version:
    When I try to start a jvm with the -Xrunjdwp from C++ using JNI_CreateJavaVM and the following settings, it simply crashes. I can run my program just fine when this option is not present.
    JavaVMOption aoOptions[5];     
    aoOptions[0].optionString = m_ustrClassPath.GetStringA();
    aoOptions[1].optionString = "-Xdebug";
    aoOptions[2].optionString = "-Xnoagent";
    aoOptions[3].optionString = "-Djava.compiler=NONE";
    aoOptions[4].optionString = "-Xrunjdwp:transport=dt_socket,address=localhost:8000,server=y,suspend=n";
    I have all the appropriate jar files on the classpath and the DLL's are on the path. I am running 1.4.2. I have also tried dt_shmem and a combination of most of the adjustable paramaters being on/off or not present. Any help would be greatly appreciated!!!
    Thanks,
    Chris
    The long version (or why I want to do this crazy thing):
    I am migrating a product line from Visual Basic/C++/COM to Java. I recently purchased JBuilder 9 with the hope that I could use the attach to running JVM process to debug fully. When I attempted to add the neccessary options, my jvm create dies. I can't get to a point to attach from JBuilder.

    I have finally found a solution...
    Please see this bug: http://developer.java.sun.com/developer/bugParade/bugs/4335526.html
    The bug has not been fixed but a workaround exists. Please see the bug for full information, the short answer is this.
    When using the below settings, the -Xrun option is causing an Access Exception crash within jvm.dll. This seems to be because the -Xrun string is modified within jvm.dll.
    JavaVMOption aoOptions[5];
    aoOptions[0].optionString = m_ustrClassPath.GetStringA();
    aoOptions[1].optionString = "-Xdebug";
    aoOptions[2].optionString = "-Xnoagent";
    aoOptions[3].optionString = "-Djava.compiler=NONE";
    aoOptions[4].optionString = "-Xrunjdwp:transport=dt_socket,address=localhost:8000,server=y,suspend=n";
    The solution that worked for me was to use strdup as indicated in the workaround for the bug.
    JavaVMOption aoOptions[5];     
    pTempStrOption = m_ustrClassPath.GetStringA();
    aoOptions[0].optionString = strdup(pTempStrOption);
    aoOptions[1].optionString = strdup("-Xdebug");
    aoOptions[2].optionString = strdup("-Xnoagent");
    aoOptions[3].optionString = strdup("-Djava.compiler=NONE");
    aoOptions[4].optionString = strdup("-Xrunjdwp:transport=dt_socket,address=3333,server=y");
    This has caused me grief for months. It was not easy to locate in the bug database. It existed in 1.3 and still exists as of 1.4.2. I am not sure about the 1.5 beta.

Maybe you are looking for