Request for any Best Practice document for configuring Service Parameters on CUCM 9.1.1

Hi Team,
Could you please send if you have any  Best Practice document for configuring Service Parameters on CUCM 9.1.1. That would really help.
Thanks,
Guru

Hi
There's no 'best practice' as such, but there are a few that I think should be default:
Enabling CDR, On-Hook Pickup, CFwdAll Override... but really the settings are specific to the requirements of the deployment.
Aaron

Similar Messages

  • Is there any Best Practice Document for OEDQ development?Please share.

    Is there any Best Practice Document for OEDQ development?Please share.

    Hello, Please check the below projects, you would get better idea on the best practices like Naming Standards, which processors to use, how to bundle the jobs, external tasks etc.,
    edq-cds-data-quality-health-check-9.0.4.(645).dxi
    edq-cds-initialize-reference-data-9.0.4.(645).dxi
    Regards,
    Bala Govi

  • Best practice document for ACE30

    Can someone point me to a best practice document for the ACE30.  I am specifically looking at best practices as they relate to resouce allocation, logging, FT, and snmp.  I am migrating from CSM so the VIP/Server configuration is basically set.  I am looking for areas that pertain to the ACE as a whole.
    Thank you

    Good afternoon,
    I'm afraid there isn't a best practices document as such, however, I would suggest you to have a look at the ACE section in doc-wiki (http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_%28ACE%29_Troubleshooting_Guide).
    This document can give you some useful insights on different topics, including (but not limited to) resource allocation.
    I hope this helps
    Daniel

  • Best practice document for SRM

    Hi all
    Is there a best practice document for SRM setup and Qucksizing tool for SRM-MDM
    thanks

    Hello,
    SRM related best practice building block is S60 - Self-Service Procurement (Procure 2 Pay)
    Please find the link:
    http://help.sap.com/bp_bblibrary/600/html/S60_EN_DE.htm
    Hope this will be useful.
    Thanks
    Ashutosh

  • Best Practice Document to Configure Quality Management Analytics

    Hi Experts,
    Can any one help in finding out the best practices document for installing BI content for Quality Management.
    Regards,
    Santhosh

    Hi Reddy,
    Thanx  for the link but I have a requirement to install the BI content for Quality management to present it to the client. So I need to install as a whole not for a particular requirement.
    I want to know do I need to install all the datasources like masterdata and Transactional which are available in RSA5.
    Regards,
    Santhosh.

  • Looking for a best-practices guide for developing in TestStand

    I am looking for a best-practices guide for developing in TestStand. LabVIEW has its style guides and books, but there is very little published about TestStand.
    Also, and I mention this since NI checks these entries as well, how about adding TestStand to the NI Developer Zone?
    Thanks in advance for any leads or documents you can provide!

    Thanks! I was stuck on entering "TestStand best practices" into NI's search engine, and never thought of entering "TestStand style guide."
    If anyone knows of additional pertinent content, I would appreciate hearing about it.

  • SAP Best Practice document for Extended Warehouse Management

    Hi,
    Does SAP have any Best Business Practice document for SCM Extended Warehouse Management solution?
    Request to please provide me link if any?
    Thanks and Rgds,

    Hi Reddy,
    Thanx  for the link but I have a requirement to install the BI content for Quality management to present it to the client. So I need to install as a whole not for a particular requirement.
    I want to know do I need to install all the datasources like masterdata and Transactional which are available in RSA5.
    Regards,
    Santhosh.

  • Looking for BODS Best Practice document

    Hi,
    Can anyone pls. share BODS best practice document in case you have any. I tried to find out from net and i couldn't.
    Thanks and Regards,
    Gannu.N

    Ok you need some spoon feeding it seems. You should have checked the correct answer from the post and searched the key word "SAP Best Practices for Data Migration and Data Quality" in google.
    Here's the link SAP Best Practices for Data Migration and Data Quality – SAP Help Portal Page
    Also as a heads up, there won't be any single document which gives all the details you need. You need to narrow down your search and focus on the required material only.

  • Any best practice recommendations for controlling access to dashboards?

    Everyone,
         I understand that an Xcelsius dashboard compiled into a .swf file contains no means for providing access control to limit who can or how many times they can run the dashboard. Basically, if they have a copy of the .swf they can use it as much as they'd like. To protect access to sensitive data I'd like to be able to control who can access the dashboard and how many times or how long they can access it for.
         From what I've read it seems the simplest way to do this is to embed the swf file into a web portal that requires a user to authenticate before accessing the file. I suppose I can then handle how long they can access it from the back end.
         If I do this, is there anyway a user can do something like <right click - save as> on the flash file to save it on their local machine? Is there a best practice means for properly protecting the dashboard?
    Any advice would be appreciated,
    Jerry Winner

    Everyone,
         I understand that an Xcelsius dashboard compiled into a .swf file contains no means for providing access control to limit who can or how many times they can run the dashboard. Basically, if they have a copy of the .swf they can use it as much as they'd like. To protect access to sensitive data I'd like to be able to control who can access the dashboard and how many times or how long they can access it for.
         From what I've read it seems the simplest way to do this is to embed the swf file into a web portal that requires a user to authenticate before accessing the file. I suppose I can then handle how long they can access it from the back end.
         If I do this, is there anyway a user can do something like <right click - save as> on the flash file to save it on their local machine? Is there a best practice means for properly protecting the dashboard?
    Any advice would be appreciated,
    Jerry Winner

  • Is there any best practice document by SAP on MRP

    Hi experts ,
    i am working on consumption based planning for client , there i required to refer Best practice document by SAP for MRP.
    I was searched the same in building block library and help document is not there.
    please let me know if any doc is there
    Kaustubh

    hi ,
    check this link
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/MMCBPCBP/MMCBPCBP.pdf
    Regards
    G.Ganesh Kumar

  • Imaging solution for EBS: Best practice guide for server setup

    Hi,
    We have to implement Imaging solution for EBS using AXF adapter. For this, customer is going to procure and implement SOA and WebCenter Content from scratch.
    We are now faced with the challenge whether to recommend SOA and WCC on the same Weblogic server or on separate Weblogic servers. Is there any best practice guide available for setting up Application Adapters for WCC?
    Thanks
    Arijit

    Hi ,
    I think this documentation would atleast help you in starting with planning :http://docs.oracle.com/cd/E23943_01/doc.1111/e15483/toc.htm
    Thanks,
    Srinath

  • Best Practices Document for Creating/Designing Queries/Reports

    Hello all,
    I hope I am not posting my very first question in a wrong forum. I am looking for any document(s) related to Best Practises for Designing Queries/Reports using BeX Query Designer (or any other tool for that matter). I did some searching, but could not find anything related to what I am looking for.
    Thanks in advance!
    Amit

    Hi Amit:
       The documentation below might help.
    Regards,
    Francisco Milán.
    Chapter 6 of "Performance Tuning for SAP BW"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10fb4502-111c-2a10-3080-df0e41d44bb3?QuickLink=index&overridelayout=true&15882789067966
    "30 technical tips and tricks to speed query, report, and dashboard performance" by Dr. Bjarne Berg
    http://www.google.ca/url?sa=t&rct=j&q=30%20technical%20tips%20and%20tricks%20to%20speed%20query%2C%20report%2C%20and%20dashboard%20performance&source=web&cd=2&ved=0CFQQFjAB&url=http%3A%2F%2Fcsc-studentweb.lr.edu%2Fswp%2FBerg%2Farticles%2FNW2010%2FBerg_NW2010_30_tips_for_SAP_BI_performance_v4.pptx&ei=oVIYULT3HIOJ6AHUuICADw&usg=AFQjCNGZnqACv5u3ai81xvKH1Kq-qckavg
    "Improving Query Performance by Effective and Efficient Maintenance of Aggregates" paper by Naween Kumar Yadav.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906de68a-0a28-2c10-398b-ef0e11ef2022?QuickLink=index&overridelayout=true&43426414363758
    "Summary of BI/BW 7.0 performance improvements" blog by Jens Gleichmann.
    http://scn.sap.com/people/jens.gleichmann/blog/2010/10/12/summary-of-bibw-70-performance-improvements
    "BEx Front end Performance"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40955430-dc1c-2a10-349a-fa181307d7df?QuickLink=index&overridelayout=true&15882789070879
    "Performance Optimization of Long Running Queries Using OLAP Cache" paper by Raghavendra Padmanaban T.S. and Ananda Theerthan J.
    https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f048c590-31a4-2c10-8599-bd01fabb93d4&overridelayout=true
    "BW Performance Tuning" paper by Dr. Thomas Becker and Alexander Peter
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/701382b6-d41c-2a10-5f82-e780e546d3b6?QuickLink=index&overridelayout=true&15878494103977
    "Performance Tuning for SAP Business Information Warehouse" paper by Alexander Peter and Uwe Heinz
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c?QuickLink=index&overridelayout=true&5003637415559
    "How to… Performance Tuning with the OLAP Cache"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a?QuickLink=index&overridelayout=true&5003637412341
    Queries section of "Performance Tuning Massive SAP BW Systems - Tips & Tricks" paper by Jay Narayanan.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94?QuickLink=index&overridelayout=true&5003637414215

  • Looking for Security Best Practices documentation for Sybase ASE 15.x

    Hello, I'm looking for SAP/Sybase best practice documentation speaking to security configurations for Sybase ASE 15.x. Something similar to this:
    Sybase ASE 15 Best Practices: Query Processing &amp;amp; Optimization White Paper-Technical: Database Management - Syba…
    Thanks!

    Hi David,
    This is something I found on the Sybase site:
    Database Encryption Design Considerations and Best Practices for ASE 15
    http://www.sybase.com/files/White_Papers/ASE-Database-Encryption-3pSS-011209-wp.pdf
    ASE Encryption Best Pracites:
    http://www.sybase.com/files/Product_Overviews/ASE-Encryption-Best-Practices-11042008.pdf
    If these do not help, you can search for others at:
    www.sybase.com > serach box on the top right.
    I searched "best pracitces security"
    Can also run advanced search > I typed in "ssl" into exact phrase.
    Hope this helps,
    Ryan

  • Data files available in Best Practice document for BPC

    Any idea how to retrieve data files avaialble under Miscellaneous folder on Best Preactice cd. These files are not available online and don't know how to retrieve the same.  Any help kindly appreciated.
    Sachin

    Download available through swdc.

  • Any best practice/suggestion on giving Id's for UI Component

    Hi,
    I came to know that for better performance, id's on naming containers shall be less than 7 characters in length.
    What about UI Components other than container components?
    Is there any best practice available for giving Id's for UI Components and its length?
    Do we face any issue if we give ids with more than 7 characters (just to make the id meaningful one)?
    Thanks in Advance
    Raguraman

    a quotation from
    Oracle® Fusion Middleware Performance and Tuning Guide book
    11g Release 1 (11.1.1)
    E10108-02
    >
    The "id" attribute should not be longer than 7 characters in length. This is
    particularly important for naming containers. A long id can impact
    performance as the amount of HTML that must be sent down to the
    client is impacted by the length of the ids.

Maybe you are looking for