Request for author in Beginners Guide/Wireless Netctl

Since netctl has been in [core] for a while now and since netcfg has been depreciated, it's pretty poor that one of the most popular pages on our wiki is out-of-date.  I am asking for someone with knowledge of netctl/wireless to make an edit the section linked below updating it with proper instructions for netctl.  I would do it myself, but have not used netctl with a wireless profile; my workstation does not have wifi and my laptop is elsewhere at the moment.  I might take a stab at it based on the docs, but will want someone using a wireless profile to check what I write for accuracy.  Anyone using netctl with wireless and willing to edit this first?
https://wiki.archlinux.org/index.php/Be … Wireless_2
Last edited by graysky (2013-05-25 10:09:49)

Sorry you didn't get an answer faster but you have to know this is a peer to peer forum. it is users helping other users so not always the quickest way. First off, can you change your ISP router to modem only mode? It is best that way as you will get conflicts such as what you are seeing when there are two routers in the same link. You are getting the ISP router when you enter 192.168.1.1 because that is its address on the LAN side. It appears that your router is getting set to a 10.x IP because of the setup. You have two routers trying to work with DHCP so that is also an issue. If you can change the ISP router to modem only mode then once it is up disconnect it from the router and do a factory reset on your router and make sure it has the IP of 192.168.1.1 and you will then be able to make any changes you need to. the default login is password of admin and leave the user blank.

Similar Messages

  • Request for MSI GT60 dissassembly guide

    As posted, can someone from any guru's here post on how to dissamble this laptop? Thanks

    Here you are: https://forum-en.msi.com/faq/uploads/157/MS-16F3_Disassembly_guide.pdf

  • Skipping request for user policy assignments due to agent configuration for authority

    Hello all,
    Symptoms:
    The Configuration Manager only shows the following actions:
    Application Deployment Evaluation Cycle
    Machine Policy Retrieval & Evaluation Cycle
    Software Updates Deployment Evaluation Cycle
    User Policy Retrieval & Evaluation Cycle
    In Software Center there are no applications visible. Also the default 'IT Organization' is shown instead of the 'real' name.
    The Confugration Manager:
    shows in the tab 'General' the correct Management point. Connection type is 'currently intranet' (ok)
    shows in the tab 'Site' the correct site code.
    shows in the tab 'Components' all components as either 'installed' or 'enabled'. Only CCM Notification Agent shows 'Disabled'.
    In SCCM 2012 under 'Client Settings' -> 'Default Settings' -> 'Client Policy' the setting 'Enable User policy on clients' has been enabled.
    Done so far (without success):
    Re-installed the MP
    Run a query on the SCCM Database to check if there are any corrupt records. There are not.
    Installed version 5.00.7958.1000
    CCM Framework: 5.00.7958.1203
    The computer is installed with a task sequence. There is a reboot after 'Setup Windows and ConfigMgr (CM2012 R2 CU1)'.
    Installation command of the SCCM Client (during OSD deployment):
    SMSCACHEFLAGS=PERCENTDISKSPACE SMSCACHESIZE=10 SMSSLP=demo-sccm.demoforest.local SMSMP=demo-sccm.demoforest.local PATCH="%_SMSTSMDataPath%\OSD\TDS00020\KB2938441\configmgr2012ac-r2-kb2938441-i386.msp"
    Content log files on the client:
    PolicyAgent.log:
    Processing PreShutdown event PolicyAgent_RequestAssignments 8/4/2014 11:56:52 PM 2204 (0x089C)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/4/2014 11:57:37 PM 2436 (0x0984)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/4/2014 11:57:37 PM 2436 (0x0984)
    Registered for MP notifications. PolicyAgent_PostStartup 8/4/2014 11:57:37 PM 2436 (0x0984)
    Not rerequesting policy on site code change in provisioning mode. PolicyAgent_ReRequestPolicy 8/5/2014 12:01:55 AM 3212 (0x0C8C)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:02:48 AM 2352 (0x0930)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:02:48 AM 2352 (0x0930)
    Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:02:48 AM 2352 (0x0930)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:11:36 AM 2720 (0x0AA0)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
    Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:25:02 AM 3164 (0x0C5C)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
    Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
    Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:26:05 AM 2652 (0x0A5C)
    Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
    Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
    Triggered update of user S-1-5-21-1840543543-1948091412-3654635223-1109 settings PolicyAgent_RequestAssignments 8/5/2014 9:00:57 AM 3232 (0x0CA0)
    Requesting User policy assignments for 'S-1-5-21-1840543543-1948091412-3654635223-1109' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
    Requesting User policy from authority 'SMS:TDS' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
    Skipping request for user policy assignments due to agent configuration for authority 'SMS:TDS'. PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
    ClientIDManagerStartup.log:
    [----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:24:34 AM 372 (0x0174)
    Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    SID unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
    HWID unchanged ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
     Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
     Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
     HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
     HardwareID2=98130500010000EE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Failed to open to WMI namespace '\\.\root\ccmvdi' (8007045b) ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
    [----- SHUTDOWN -----] ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
    [----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:25:42 AM 2012 (0x07DC)
    Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    SID unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
    HWID unchanged ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
     Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
     Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
     Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
     HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
     HardwareID2=98C70600010000EE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
    ClientAuth.log:
    Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
    Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
    Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
    Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
    ClientLocation.log:
    Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
    Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
    Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
    1:24:53 AM 2932 (0x0B74)
    Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
    Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
    1:24:54 AM 2932 (0x0B74)
    Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:54 AM 2932 (0x0B74)
    Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
    Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
    Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
    1:25:53 AM 2504 (0x09C8)
    Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
    1:25:53 AM 2504 (0x09C8)
    Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Getting Assigned Site ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
    Assigned Site is TDS ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
    Getting Assigned Site ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
    Assigned Site is TDS ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
    execmgr.log (with errors):
    Requesting MTC to delete task with id: {C5DCEE82-C903-4CBD-98CC-534646B3EFD7} execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
    This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
    Service startup. execmgr 4/22/2014 7:16:09 PM 2332 (0x091C)
    Service startup. execmgr 4/22/2014 9:17:36 PM 2216 (0x08A8)
    Service startup. execmgr 4/22/2014 9:23:02 PM 2348 (0x092C)
    Service startup. execmgr 4/22/2014 9:24:53 PM 1000 (0x03E8)
    Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
    If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 3224 (0x0C98)
    Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
    If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 1292 (0x050C)
    Service startup. execmgr 8/4/2014 11:57:32 PM 3696 (0x0E70)
    Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
    If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:57:33 PM 3696 (0x0E70)
    Software distribution agent was enabled execmgr 8/5/2014 12:01:55 AM 3448 (0x0D78)
    Service startup. execmgr 8/5/2014 12:02:44 AM 2272 (0x08E0)
    ExecMgr::GetTaskState - GetTaskState Failed with error code 0x87d00317 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
    Policy arrived for child program Install execmgr 8/5/2014 12:03:02 AM 1648 (0x0670)
    Creating mandatory request for advert TDS20014, program Install, package TDS00014 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
    An existing MTC token was supplied, this execution request is not owner of MTC object. execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
    CertificateMaintanance.log:
    HTTP is selected for Client. The current state is 0. CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
    Raising pending event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     DateTime = "20140422164904.539000+000";
     HRESULT = "0x00000001";
     ProcessID = 3320;
     ThreadID = 604;
     CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
    Raising event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     ClientID = "GUID:7ff40832-4c01-456f-9705-096da67985b3";
     DateTime = "20140422164946.336000+000";
     HRESULT = "0x00000001";
     ProcessID = 3320;
     ThreadID = 3216;
     CertificateMaintenance 4/22/2014 6:49:46 PM 3216 (0x0C90)
    HTTP is selected for Client. The current state is 0. CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
    Raising pending event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     DateTime = "20140804215639.612000+000";
     HRESULT = "0x00000001";
     ProcessID = 2144;
     ThreadID = 2212;
     CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
    Raising event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804215651.440000+000";
     HRESULT = "0x00000001";
     ProcessID = 2144;
     ThreadID = 3348;
     CertificateMaintenance 8/4/2014 11:56:51 PM 3348 (0x0D14)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/4/2014 11:56:56 PM 1096 (0x0448)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:02:33 AM 1656 (0x0678)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:11:17 AM 384 (0x0180)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:24:34 AM 372 (0x0174)
    Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:25:42 AM 2012 (0x07DC)
    smscliui.log:
    Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={FC736B58-2635-45B8-8002-E7C8D6CCEB8D} smscliui 8/5/2014 9:02:34 AM 2484 (0x09B4)
    Current Assigned Site: TDS smscliui 8/5/2014 9:02:38 AM 868 (0x0364)
    Currently assigned FQDN:  smscliui 8/5/2014 9:02:41 AM 868 (0x0364)
    Failed to set DNSSuffix value to the registry. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
    SMS Site code has not been changed. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
    Current Assigned Site: TDS smscliui 8/5/2014 1:19:20 PM 2160 (0x0870)
    CcmMessaging.log:
    Queue 'StateMessageManager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'StateMessageManager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'CTMDTSReply'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'CTMDTSReply' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'CTMDTSReply'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'execmgr'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'execmgr' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'execmgr'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'PolicyAgent_RequestAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'PolicyAgent_RequestAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'PolicyAgent_RequestAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'ClientRegistration'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'ClientRegistration' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'ClientRegistration'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'EndpointProtectionAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'EndpointProtectionAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'EndpointProtectionAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'LS_ScheduledCleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'LS_ScheduledCleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'LS_ScheduledCleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'PolicyAgent_Cleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'PolicyAgent_Cleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'PolicyAgent_Cleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'DCMAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'DCMAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'DCMAgent'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'CertEnrollAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'CertEnrollAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'CertEnrollAgent'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'ExternalEventAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'ExternalEventAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'ExternalEventAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'UpdateStore'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'UpdateStore' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'UpdateStore'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'PolicyAgent_ReplyAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'PolicyAgent_ReplyAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'PolicyAgent_ReplyAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'SMSSHA'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'SMSSHA' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'SMSSHA'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'lmp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'lmp_[http]mp_locationmanager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'lmp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'mp_statusreceiver'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'mp_statusreceiver' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'mp_statusreceiver'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initializing queue 'mp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Queue 'mp_[http]mp_locationmanager' initialized with 1 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Initialized queue processor 'mp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232553.423000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232553.485000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232553.563000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232553.657000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232606.048000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2508;
     CcmMessaging 8/5/2014 1:26:06 AM 2508 (0x09CC)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232606.110000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2188;
     CcmMessaging 8/5/2014 1:26:06 AM 2188 (0x088C)
    Raising event:
    instance of CCM_CcmHttp_Status
     ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
     DateTime = "20140804232606.188000+000";
     HostName = "DEMO-SCCM.demoforest.local";
     HRESULT = "0x00000000";
     ProcessID = 1996;
     StatusCode = 0;
     ThreadID = 2504;
     CcmMessaging 8/5/2014 1:26:06 AM 2504 (0x09C8)
    CcmNotificationAgent.log:
    Bgb client agent is starting... BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
    Bgb client agent is disabled BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
    TCP Listener is disabled. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
    BgbController main thread is started with settings: {bgb enable = 0}, {tcp enabled = 0}, {tcp port = 0} and {http enabled = 0}. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
    Wait 3600 seconds for event notification. BgbAgent 8/5/2014 1:26:05 AM 3076 (0x0C04)
    Wait 3600 seconds for event notification. BgbAgent 8/5/2014 2:26:05 AM 3076 (0x0C04)
    Any help is appreciated and with kind regards,
    Willem-Jan

    Hello all,
    I modified the TS, but the problem is still there.
    smsts.log:
    ==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Executing task sequence OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
    Debug shell is enabled OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Successfully enabled debug command shell support. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Configuring local administrator account OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Re-assign all drive letters... OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Could not open drive Q:\ (80070005) OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Ignoring inaccessible volume 'Q:' with error 0x80070005 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    No partition needs to be udpated. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Installing SMS client OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Client already installed. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Moving logs to SMS client directory OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Successfully moved logs to SMS client log directory: C:\Windows\CCM\Logs\SMSTSLog OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Executing task sequence manager bootstrap OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    Executing command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
    ==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Current OS version is 6.1.7601.1 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Logging successfully initialized. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Resuming Task Sequence in Full OS TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    We are going in GINA and potentially need to set the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    setting the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    ==========[ TsProgressUI started in process 2196 ]========== TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Registering COM classes TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Unregistering class objects TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Shutdown complete. TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
    Process completed with exit code 0 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Successfully registered TS Progress UI. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Found network adapter "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)" with IP Address 5.5.5.101. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Starting Task Sequence Manager. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    executing TS Manager not in full media TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    executing TS Manager in c:\windows\ccm TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Executing command line: "TsManager.exe" TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
    Successfully intialized Logging for TS Manager. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Commandline: "TsManager.exe" TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    /service parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    /standalone parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    /noclient parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Successfully registered Task Sequencing COM Interface. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Executing as a standalone exe TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Initializing TS Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Opening Task Sequencing Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    NOT executing in WinPE TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling Config policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling config policies... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling SysHealthConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 684, uncompressed size 4652. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling SoftUpdConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 1922, uncompressed size 19242. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling SoftDistClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 1327, uncompressed size 13740. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling NAAConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 1022, uncompressed size 6494. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling RebootSettingsConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 433, uncompressed size 1556. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Compiling AppManClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    ::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Decompression (zlib) succeeded: original size 982, uncompressed size 6358. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Get Install Directory for SMS Client TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 435 TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3}") AND (PolicyState
    = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:TDS") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
    4:51:50 PM 2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
    4:51:51 PM 2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 9 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
    RequestedConfig policy instance(s) : 11943 TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
    4:51:57 PM 2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
    Total RequestedConfig policy instance(s) : 12387 TSManager 8/5/2014 4:52:00 PM 2244 (0x08C4)
    New/Changed ActualConfig policy instance(s) : 0 TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Policy evaluation initiated TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"'  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'  TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
    Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine'
    The Powershell command as described by NPerson give the output:
    C:\Windows\system32>powershell Invoke-WmiMethod -Namespace root\CCM -Class SMS_C
    lient -Name SetClientProvisioningMode -ArgumentList $false
    __GENUS          : 1
    __CLASS          : __PARAMETERS
    __SUPERCLASS     :
    __DYNASTY        : __PARAMETERS
    __RELPATH        : __PARAMETERS
    __PROPERTY_COUNT : 1
    __DERIVATION     : {}
    __SERVER         : DEMO-CAPTURE
    __NAMESPACE      : ROOT\ccm
    __PATH           :
    \\DEMO-CAPTURE\ROOT\ccm:__PARAMETERS
    ReturnValue      :
    PSComputerName   : DEMO-CAPTURE
    It is about the PSComputerName: that is the name of the machine on which the capture was made. So I suppose the problem is already in the image. Is my statement correct or is it not relevant?
    With kind regards,
    Willem-Jan

  • (Request) Please add "Time Left" for highlighted Show on guide!

    I have a small request for the X1 guide! I would like to see "Time Left" added to the info area when you highlight a show on the guide that is currently on  Just like this!

    If I want the time left, I just use the up arrow key.

  • Request for MSI X360(MS-1355) dissassembly guide

    Request for MSI X360(MS-1355) dissassembly guide

    I need clearer instruction on how to remove the keyboard.
    There are 3 clips/locks on the top portion of the keyboard. somehow Prying it with a flat head screw driver does nothing.
    Or do you need to unscrew the screws at the botton of the chassis first before trying to remove the keyboard?
    How exactly do you pry the said 3 clips/locks at the top of the keyboard?

  • Request for MSI U180(MS-N082) dissassembly guide

    Request for MSI U180(MS-N082) dissassembly guide

    I need clearer instruction on how to remove the keyboard.
    There are 3 clips/locks on the top portion of the keyboard. somehow Prying it with a flat head screw driver does nothing.
    Or do you need to unscrew the screws at the botton of the chassis first before trying to remove the keyboard?
    How exactly do you pry the said 3 clips/locks at the top of the keyboard?

  • NPS: Event 6274 - Network Policy Server discarded the request for a user

    Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
    Some computers are affected more than others, although they are identical hardware and based on a standard image.
    In the event log of the NPS servers I can see the following messages:
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          2/05/2014 8:47:58 a.m.
    Event ID:      6274
    Task Category: Network Policy Server
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      NT147.domain.local
    Description:
    Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
     Security ID:   NULL SID
     Account Name:   host/DPC0387.domain.local
     Account Domain:   DOMAIN
     Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
     Security ID:   NULL SID
     Account Name:   -
     Fully Qualified Account Name: -
     OS-Version:   -
     Called Station Identifier:  3c-xx-xx-xx-xx-xx
     Calling Station Identifier:  00-xx-xx-xx-xx-xxNAS:
     NAS IPv4 Address:  10.nnn.nnn.nnn
     NAS IPv6 Address:  -
     NAS Identifier:   ND246
     NAS Port-Type:   Ethernet
     NAS Port:   71RADIUS Client:
     Client Friendly Name:  Network Device Management Subnet
     Client IP Address:   10.nnn.nnn.nnnAuthentication Details:
     Connection Request Policy Name: NAP 802.1X (Wired)
     Network Policy Name:  -
     Authentication Provider:  Windows
     Authentication Server:  NT147.domain.local
     Authentication Type:  -
     EAP Type:   -
     Account Session Identifier:  384F322E317838316564303034313030306230666632
     Reason Code:   1
     Reason:    An internal error occurred. Check the system event log for additional information.
    How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
    Here's the packet trace that matches the event log entry above:
    No.     Time        Source                Destination           Protocol Length Time from request Info
          1 0.000000    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
          2 2.470423    Universa_xx:xx:xx     Nearest               EAPOL    60                       Start
          3 2.472870    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
          4 2.539416    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Identity
          5 2.544206    Universa_xx:xx:xx     Nearest               EAPOL    60                       Start
          6 2.548804    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
          7 2.550050    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Identity
          8 2.552597    10.switch             10.NPS_Server         RADIUS   254                      Access-Request(1) (id=249, l=208)
          9 2.556043    10.NPS_Server         10.switch             RADIUS   136    0.003446000       Access-Challenge(11) (id=249, l=90)
         10 2.565876    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Protected EAP (EAP-PEAP)
         11 2.569472    10.switch             10.NPS_Server         RADIUS   254                      Access-Request(1) (id=250, l=208)
         12 2.572566    10.NPS_Server         10.switch             RADIUS   136    0.003094000       Access-Challenge(11) (id=250, l=90)
         13 2.580254    Universa_xx:xx:xx     Nearest               TLSv1    123                      Client Hello
         14 2.586544    10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=251, l=315)
         15 4.564841    Universa_xx:xx:xx     Nearest               EAPOL    60                       Start
         16 4.568530    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
         17 4.569876    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Identity
         18 4.582263    10.switch             10.NPS_Server         RADIUS   254                      Access-Request(1) (id=252, l=208)
         19 4.586006    10.NPS_Server         10.switch             RADIUS   136    0.003743000       Access-Challenge(11) (id=252, l=90)
         20 4.591896    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Protected EAP (EAP-PEAP)
         21 4.592692    Universa_xx:xx:xx     Nearest               TLSv1    123                      Client Hello
         22 4.599634    10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=253, l=315)
         23 4.600887    10.NPS_Server         10.switch             IPv4     1518                     Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
         24 4.609920    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    1514                     Server Hello, Certificate, Certificate Request, Server Hello Done
         25 4.610516    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Protected EAP (EAP-PEAP)
         26 4.617407    10.switch             10.NPS_Server         RADIUS   262                      Access-Request(1) (id=254, l=216)
         27 4.618352    10.NPS_Server         10.switch             RADIUS   288    0.000945000       Access-Challenge(11) (id=254, l=242)
         28 4.623650    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    176                      Server Hello, Certificate, Certificate Request, Server Hello Done
         29 4.643316    Universa_xx:xx:xx     Nearest               TLSv1    361                      Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
         30 4.649607    10.switch             10.NPS_Server         RADIUS   601                      Access-Request(1) (id=255, l=555)
         31 4.656950    10.NPS_Server         10.switch             RADIUS   199    0.007343000       Access-Challenge(11) (id=255, l=153)
         32 4.662734    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    87                       Change Cipher Spec, Encrypted Handshake Message
         33 4.681106    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Protected EAP (EAP-PEAP)
         34 4.788536    10.switch             10.NPS_Server         RADIUS   262                      Access-Request(1) (id=2, l=216)
         35 4.789735    10.NPS_Server         10.switch             RADIUS   173    0.001199000       Access-Challenge(11) (id=2, l=127)
         36 4.795723    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    61                       Application Data
         37 4.796372    Universa_xx:xx:xx     Nearest               TLSv1    93                       Application Data
         38 4.802368    10.switch             10.NPS_Server         RADIUS   331                      Access-Request(1) (id=3, l=285)
         39 4.803363    10.NPS_Server         10.switch             RADIUS   189    0.000995000       Access-Challenge(11) (id=3, l=143)
         40 4.808905    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    77                       Application Data
         41 4.809501    Universa_xx:xx:xx     Nearest               TLSv1    77                       Application Data
         42 4.817342    10.switch             10.NPS_Server         RADIUS   315                      Access-Request(1) (id=4, l=269)
         43 4.822986    10.NPS_Server         10.switch             RADIUS   189    0.005644000       Access-Challenge(11) (id=4, l=143)
         44 4.828973    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    77                       Application Data
         45 4.833318    Universa_xx:xx:xx     Nearest               TLSv1    829                      Application Data
         46 4.840610    10.switch             10.NPS_Server         RADIUS   1073                     Access-Request(1) (id=5, l=1027)
         47 4.845946    10.NPS_Server         10.switch             RADIUS   189    0.005336000       Access-Challenge(11) (id=5, l=143)
         48 4.850938    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    77                       Application Data
         49 4.907924    Universa_xx:xx:xx     Nearest               TLSv1    141                      Application Data
         50 4.913390    10.switch             10.NPS_Server         RADIUS   379                      Access-Request(1) (id=6, l=333)
         51 4.917535    10.NPS_Server         10.switch             RADIUS   221    0.004145000       Access-Challenge(11) (id=6, l=175)
         52 4.922877    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    109                      Application Data
         53 4.923472    Universa_xx:xx:xx     Nearest               TLSv1    61                       Application Data
         54 4.930319    10.switch             10.NPS_Server         RADIUS   299                      Access-Request(1) (id=7, l=253)
         55 4.937348    10.NPS_Server         10.switch             RADIUS   381    0.007029000       Access-Challenge(11) (id=7, l=335)
         56 4.942543    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    269                      Application Data
         57 4.944791    Universa_xx:xx:xx     Nearest               TLSv1    125                      Application Data
         58 4.951408    10.switch             10.NPS_Server         RADIUS   363                      Access-Request(1) (id=8, l=317)
         59 4.954022    10.NPS_Server         10.switch             RADIUS   355    0.002614000       Access-Accept(2) (id=8, l=309)
         60 4.981482    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Success
         61 32.590347   10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=251, l=315)
         62 62.592420   10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=251, l=315)
         63 92.595043   10.switch             10.NPS_Backup_Server  RADIUS   361                      Access-Request(1) (id=9, l=315)
         64 122.597856  10.switch             10.NPS_Backup_Server  RADIUS   361                      Access-Request(1) (id=9, l=315)
         65 152.600618  10.switch             10.NPS_Backup_Server  RADIUS   361                      Access-Request(1) (id=9, l=315)

    A belated thanks for your reply.
    Our environment doesn't have NPS accounting configured so that was easy to rule out.
    The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
    I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard.  At the start of a dot1x authentication request a RADIUS session ID is created.  For whatever reason the
    RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured.  The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
    Policy Server discarded the request for a user." occurs.
    It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
    There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
    It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
    I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
    switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
    to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012?

  • How to create request for extracting company code

    Hi All,
    Can any body guide me how to create a request for extraction of company code 0COMP_CODE_ATTR.
    Actually i have created a request using transport conneciton but while moving this request to quality system i am getting following error.
    DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
    Mapping between data source 0COMP_CODE_TEXT and source system QLTCLNT440 is inconsistent
    DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
    Field KEY1 will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
    Field TXTMD will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
    Start of the after-import method for object type R3TR ISTS (Activation Mode)
    Reference to transfer structure 0COMP_CODE_TEXT_BB not available. No activation possible.
    Start of the after-import method for object type R3TR ISTS (Delete Mode)
    Start of the after-import method for object type R3TR ISMP (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
    The errors affect the following components:
       BW-WHM (Warehouse Management)
    Actually i have checked in Quality system 0COMP_CODE_TEXT is availble active. But i think we have to use 0COMP_CODE_ATTR data source...
    Pls help,,,
    Regards,
    viren.

    Hi Viren,
    Glad that your problem is resolved.
    Help.Sap.com is the best reference: http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Also check the "How-To" docs in https://www.sdn.sap.com/irj/sdn/developerareas/bi
    Bye
    Dinesh

  • Any beginners' guide to Project Online?

    Hi all,
    My company has recently subscribed to Office 365 Pro and Project Online was included in the package. From what I can tell, Project Online is a really powerful tool that can be useful in many situations. As someone who has zero experience or exposure
    to Microsoft Project or Project Online, I find it extremely challenging to use it. Thus, I would appreciate your help in pointing me to the right direction in my attempt to learn how to use Project Online. Are there any books that I can refer to get started
    (some sort of beginners' guide would be really useful)?
    Thanks for your help.

    Hello,
    There are lots of really good books and blogs out there. Some links are below.
    A series I wrote myself:
    http://pwmather.wordpress.com/2014/07/22/getting-started-with-projectonline-round-up-ps2013-office365-project-ppm-sharepointonline-pm-sp2013/
    From Microsoft:
    https://support.office.com/client/Get-started-with-Project-Online-e3e5f64f-ada5-4f9d-a578-130b2d4e5f11
    See how you get on with those plus use your favourite search engine - you will find lots!
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS |
    MVP | Downloads

  • [SOLVED] Beginners' Guide stumped on pacman -Syyu curl

    I'm a total green noob on Arch and am going through the Beginners' Guide. I'm on the section about rankmirrors and am at pacman -Syyu curl and am getting the following:
    Is this normal? Is this the part where I continue to edit my mirrorlist and comment and uncomment servers until I don't get the Unauthorized error any longer?
    Thanks.
    Last edited by EdTheUniqueGeek (2012-04-27 23:53:53)

    EdTheUniqueGeek wrote:I'm a total green noob on Arch [...] I'm on the section about rankmirrors [...]
    If you're new to Arch don't you think that sticking to basic bulletproof setup would be wise and then learn new stuff? If you try all things that are not necessary there is high risk of breaking system and you wont even have a clue where start to look for solution. Back in my first days with Arch I didn't even consider such things like mirror rank - goal was to setup working system. My advice is - choose manually mirror that have low sync delay from http://www.archlinux.org/mirrors/status/ and focus on major things. Good luck and feel welcome on the forum
    EdTheUniqueGeek wrote:I am in the process I trying the shell script from adamrehard suggestion.
    Again - pick rit or kernel.org mirror - you can be pretty sure they are working right now, for troubleshooting you can even choose archlinux.org (but change it for real usage) find out if it's not the http/ftp thing like people earlier noticed and work the problem with your configuration, the problem is not mirror choosing
    Last edited by masteryod (2012-04-27 14:53:33)

  • Total beginners guide

    I am interested in SAP BI and installed the trial version of Netweaver 2004s with BI.
    I wanted to play a bit around with info cubes etc and see what SAP BI can do. But I am already stuck at a very beginners point: no logical system
    And the standard users ddic etc do not have the privileges to create on.
    Is there somewhere a beginners guide to SAP in general and SAP BI in special?
    A quick how-to for a quick success and merely for try-out!
    Thanks in advance for your help,
    Karsten.

    There is a lot of documentation on SDN, Please go through these presentations & screencams which will give you clear idea of NW 2004s...
    https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e

  • [SOLVED] Configure The System (Beginners Guide) Question

    Hello!
    I'm currently working my way through the beginners guide, from the wiki.  All going ok so far and I've reached the Configure The System section. Which is where I'm a bit stuck.
    Beginners Guide wrote:You will be presented with a menu including the most important configuration files for your system. If you want to look up the available options as stated in /etc/rc.conf just press Alt+F2 to get a shell, look it up, and switch back to the installer with Alt+F1.
    The problem I have is looking up the available options. For example, to find my locale it states I should run locale -a, however when I hit Alt+f2 and enter the command at the bash shell ([Arch Linux: /]# ) I get the following error
    -bash: locale: command not found
    When I attempt to lookup other items I'm also unable to find those (such as timezone in /usr/share/zoneinfo).
    Can anyone let me know what I'm doing wrong, I'm missing something very obvious here, but sadly I just can't work it out!
    Last edited by Laatia (2008-03-23 08:56:38)

    dyscoria wrote:
    I wouldn't skip all of the steps, particularly adding your hostname to /etc/hosts. Just fill in as much as you can, and edit the rest after you've finished installing, though I think the defaults are safe enough to have a running system.
    If you typed in 'km' and chose your locale before you ran the /arch/setup command to start the installation, it should automatically enter in the locale you selected earlier (if you press yes in the dialog box that pops up).
    Confirm this as that's what happended in this location on 2 recent install.

  • [Solved] Mounting Partitions from Beginners Guide

    Hi everyone. I've setup Arch before, but I see that the installer has been removed. I had a question on some of the documentation from the Beginners Guide...
    From the section "Prepare the storage drive" it states to setup the partitions like so:
    Name Flags Part Type FS Type [Label] Size (MB)
    sda1 Boot Primary Linux 15440
    sda2 Primary Linux swap / Solaris 1024
    sda3 Primary Linux 133000*
    In the section below it ("Mount the partitions ") it explains to "mount any other separate partition" like so:
    # mkdir /mnt/home
    # mount /dev/sda4 /mnt/home
    # mkdir /mnt/boot
    # mount /dev/sda1 /mnt/boot
    However, I set my partitions up just how it was above, when I put in the syntax "mount /dev/sda4 /mnt/home" I receive an error that sda4 doesn't exist. Using my best judgement I put in "mount /dev/sda3 /mnt/home" as I set my partitions exactly the way from the storage drive section (minus some storage space for sda3). I'd just like to be sure that I set this up right and not doing anything extremely wrong. For some reason, Arch won't boot after I have the system setup in virtualbox, and I'm trying to narrow down the issue.
    Thanks.
    Last edited by Quill (2012-09-01 04:16:22)

    Trilby wrote:
    It says to do that if you have any additional partitions.  You do not.
    Sda3 should not be mounted as home, it should be your root partition right?  You should have already done
    mount /dev/sda3 /mnt
    You should not remount sda3 as something else (in fact I suspect it should give an error).
    That partition scheme does not have a separate home parition.
    Cool, thanks for the info. Yeah, sda3 is set as my root partition. It's solved.

  • Intepreting the beginners guide on UEFI

    hi..
    perhaps someone could clarify for me the meaning on the following text on the beginners guide.
    under Gumminboot instructions it states:
    You will need to manually create a configuration file to add an entry for Arch Linux to the gummiboot manager. Create /boot/loader/entries/arch.conf and add the following contents, replacing /dev/sdaX with your root partition, usually /dev/sda2:
    followed by the command line:
    # nano /boot/loader/entries/arch.conf
    followed by the text:
    title          Arch Linux
    linux          /vmlinuz-linux
    initrd         /initramfs-linux.img
    options        root=/dev/sdaX rw
    Am I meant to write the above four lines into the menu/screen that opens?
    I suspect there may have been an earlier instances where the same 'instruction' was given but as it's not implicit .. it wasn't done.
    similarly I get the following error message on attempting to install gummiboot
    File System /boot is not a fat EFI system Partition (ESP) file system.
    Now I have windows 8 and lubuntu currently installed and they were loading prior to start of this Arch install from a Fat 32 drive labelled /boot/efi.
    I wasn't however sure (as the instruction wasn't clear in the installation guide) but was I meant to format a new efi boot or just mount the existing..
    I mounted the existing as I was assuming that the ESP is basically a list of boot loaders and I didn't want to lose the win8 just yet.
    anymore useful suggestions?
    regards
    malcolm
    I further suspect that this install isn't going too well....
    regards

    with respect any installation I do is only as good as the tutorial I am using. I have in the past installed moderately complex set ups only 6-12 months later unable to repeat the exercise because the same tutorial is not available. and therein lies the problem.. I like many perform installations at this depth too infrequently to retain the method and thus rely entirely on tutorials.
    However the real problem is the 'black box' the bios has become as a consequence of UEFI.. and that's down to a complete lack of documentation (not a linux issue but a PC manufacturers or a failure of to provide documentation) ... one is extremely cautious to do anything that might corrupt the UEFI and require a back to base exercise for the electric brick that might result.
    With that in mind I rebooted the PC and whilst no Arch both the win8 and lubuntu partitions and bootloaders were unaffected.. so at least I can repeat my errors to date without destroying my machine (assuming that's possible)...
    we will get there in the end and whilst it may not be the walk in the park I'd like it to be .. I will hopefully get a linux OS running that uses all the hardware available and has just the nec configuration to run the programs and local server set up I want...
    back to square one in the morning...

  • Promote unetbootin on the beginners guide?

    Hi All,
    In the beginners guide, there are instructions to make a bootable USB drive.
    http://wiki.archlinux.org/index.php/Beg … #USB_stick
    Would it be a good idea to add instructions for unetbootin?
    http://unetbootin.sourceforge.net/
    The only problem I have encountered using unetbootin is that it has an outdated version of arch in it's distribusion list:
    https://bugs.launchpad.net/unetbootin/+bug/318724
    The work around is to download the .iso file manually and feed it to unetbootin.
    Sorry for my language, I'm tired
    Best regards,
    Cedric

    karol wrote:http://wiki.archlinux.org/index.php/Tal … Unetbootin
    Strange, I have installed arch just fine using netbootin and an iso image.
    I will test and report back.
    Anyway, I think we better fix the issue than removing netbootin, it's a good way to make a bootable usb drive
    Regards,
    Cedric

Maybe you are looking for

  • No work for Pos 0000000071 found, see IMG-Tab. OFIC_PLANT_SRV (E report CRM

    Hi While creating a non planned service order I get an error message on line item 71 No work for Pos 0000000071 found, see IMG-Tab. OFIC_PLANT_SRV (E report CRM_SRV_LOGISTIC_EXT 001) Because of this it is not replicating into ECC. Any idea where to c

  • Acrobat Catalog in 9 Pro Extended?

    I am currently using Acrobat 6.05. I use the Acrobat Catalog application built into Acrobat extensively, creating many large indexes of searchable pdf documents. I am unable to determine whether the Catalog application is available in the newest vers

  • Still need help :( loading outside files in actionscript

    Ive been all over the forums online trying to get this problem fixed and no one has really settled it for me (its been MONTHS) So I'm going to attempt to be as in depth as possible and post code as well. Heres the deal- its a portfolio site, www,darr

  • SF200 vs C3560-X and per-VLAN RSTP: Turn off STP on SF200s?

    I have a network with pairs of 3560-X switches servicing nearly 150 access switches (44 access switches per pair) and several hundred clients. The access switches are a mixture of SF100-D (unmanaged) and SF200 (managed). I have an odd business requir

  • How can I copy a screenshot for emailing?

    I want to copy an image of the screen and include it in an emai. How can I do that?