Request for BIOS update MS-16GA

MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in 08/06/2015 at 15:26:24.80
Mainboard: MS-16GA
PCB Version: REV:1.0
BIOS Version: E16GAIG6.10A
BIOS Date: 17/05/2012
EC-FW Version:

you have to ask your OEM vendor for bios updates

Similar Messages

Request for bios update to enable the switchable graphics fixed mode.

I formaly request a new BIOS update that will enable fixed switching for the HP g6 2204tx .Folowing the recent BIOS update available in the Support Section of HPs websites, version F.26, there is still no option to enable fixed switching in the BIOS.

I can't use my laptop to it's full potential besause of this. My Disply driver is even older than my Laptop.Why do you do this to your customers. I'm never going to buy a HP laptop agin I feel that I have been cheated by HP. A very bad suport and not up to date drivers for the system

Request for next updates of Zen Mi

I have a request for next updates of Zen Micro!
Please, add an option in the Zen Micro allowing to disable the blue fading lighting during charging, it is very beautiful, but very disturbing in a bedroom all the night!

Hello,
Some of the javascripts are automatically inserted into every page that is one of them it will be fixed in a future version. It doesn't harm anything though.
Using some of the more advanced functionality in HTML DB even in future version will keep the pages from validating correctly. While it is our intention to get as fully standards compliant as possible we will always lean to the side of providing more functionality/browser compatibility over compliance.
Carl

I just bought more Ram how do I check for bios updates before I install it?

I purchased 2 4GBs 200 PIN DDR2 of memory from Crucial to upgrade my Pavillion notebook dv4t 1400 from 4 to 8 gbs
Series (DDR2) ( p/n NS244AV)
I'm running Win 7 Ultimate 64bit service pack 1
The directions say I need to check for bios updates with the maufacturer to see if I need to flash the bios before I install the new memory. How do I do that?
thank you for your help
This question was solved.
View Solution.

Please see "Updating the BIOS" to determine the current BIOS version installed and how to update the BIOS if needed. Please see the HP Pavilion dv4t-1400 CTO Entertainment Notebook PC Drivers & Downloads page for the most current BIOS version available for your computer. Click HP Notebook System BIOS Update (Intel Processors) version: F.66 A for a direct link to the BIOS download page.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HT204306 my ipad's disabled and while restoring, it keeps on requesting for an update but whenever i try to download the udpates an error occurs, plz help

my ipad's disabled and while restoring, it keeps on requesting for an update but whenever i try to download the udpates an error occurs, plz help

You might want to try disabling your firewall and antivirus software while you attempt to update/restore.

The announcement Ready for BIOS update does not come with T4400c !

I downloaded the Bios. I accomplished this steps
1 Extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding which type of disk to use).
2 Ensure the Notebook is connected to the mains.
3 Turn the Notebook off.
4 Turn the Notebook on with the F12 key. Keep the key pressed until a short beep can be heard.
The announcement Ready for BIOS update comes not and does not get ahead not.
How can I solve the problem?
(http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS&FID=TRO0000000b07)

Hi
I think its really an oldie.
Did you download really the compatible and right BIOS?
I have checked Toshiba driver page and I have found BIOS version 1.00 and 1.2.
As in the Toshiba document described you have to use the Update procedure 7.
If it doesnt work so in my opinion you have used wrong BIOS.

Req for bios update ms-6577

hi i am a bit new here! got a little question about a msi mainboard! i got this compaq pc and needed an bios update! now i did a search on this forum and came to the conclusion that it is an oem board! now i searched the hp site for this and could only find some info about the board but no updates whatsoever!! now i hoped that maybe someone found them or has an idea where i could find them or look for it!

as for Wonkanoby i know this page and indeed my mainboard is listed there but there are absolutly now drivers and/or updates there so nothing usefull!!
as for jkeane i have another pc with a kt3 ultra2 mainboard and had a driver cd with it and it contains ac97 drivers! i tried those on my ms-6577 and they seem to work perfectly so!! i suggest you go look for that mainboard and download those sound drivers

Need Help For Bios Update...

Hi Buddies, my mobo (760GM-P23 (FX)) is working with an Athlon II X3 455, Kingston HyperX KHX1333C9D3B1K2/4G Dual Kit and with just on-board graphic. MSI Live Update shows the bios H.20 as my board's and H.A0 as upgrade version. Is this information correct?
I'm an inexperienced pc user. Is there any software which installs the bios update through windows' interface?
I'm using "Core Temp" software as processor heat controller. Any other advice which shows also the mobo's temperature?
Thanks in advance..

Quote from: motan on 22-October-12, 19:58:19
Thanks for help. How do I understand that the mobo needs a bios update?
if you have no issues, then leave bios update alone
Quote from: motan on 22-October-12, 20:04:47
Thanks for help. I tried to use it. Interestingly Control Center and Live Update are not working together. Just ones is working if I install it before than other. Second gives error as "Driver can't load".
Control Center need admin permissions to runs properly.

My Portege 7020CT at start up ask for BIOS update disk

I have a Toshiba Portege 7020CT and it will not boot up as it asks for a bios update disk to be inserted into floppy then press any key.
Can anyone explain were to get the bios update disk from please and how to fix this? Many thanks.

The BIOS should be available on the Toshiba driver page.
But its very strange that the unit ask for the BIOS update.
Did you get any error messages like RTC battery is empty or something like that?
Try to enter the BIOS and try to set the bios to default options and then save the settings and try to start the notebook again.

Request for BIOS that supports 1600MHz RAM

Hello, I confirm, that with old bios version my L520 supports 1600MHz frequency of RAM.
Why is the frequency downdraded in new bioses?
Can we, users of ThinkPads, request new bios version that has all the fixes and still supports 1600MHz ? Becouse since bios downgrade sometimes when my notebook goes to standby it ends up with blue screen.
Solved!
Go to Solution.

I think there is a misunderstanding here. With intel core cpus, the memory controller is within the cpu itself and not in the chipset. So it's really a question of having a cpu that supports 1600Mhz ram rather than a bios which can support the memory. Since there are no L520s officially carrying i7 cpus (the only ones supporting 1600Mhz ram, and only some of them), installing 1600 Mhz ram is tottaly useless. Older bioses may report 1600Mhz for the ram but do not really take advantage of the higher frequency, since it is the cpu that can or cannot control it. Sandy Bridge i3 and i5 cpus can only use 1333Mhz memory so the laptop will in all cases downclock automatically the ram to 1333Mhz, using maybe lower latencies as well (which could be the only small advantage of using higher frequency ram).
You can try to upgrade your L520 with an i7, but it will void the warranty. Also the 4core i7s which can use faster memory need more current to run and warm up more, so you will have to be very careful (use a 90W power supply, check for temps often). The cpu itself is not cheap either at around $250 used, so if you really need something faster, maybe you should go for another laptop alltogether.
I hope this helps and clarifies the situation.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Conflicting instructions for BIOS update: boot from CD but undock from Ultrabase?

I have an X61 and am trying to update the BIOS to the latest.
Lenovo support has a downloadable "BIOS Update Bootable CD" for my model of ThinkPad - an ISO image that I can use to create a bootable CD that will update my BIOS.
However the instruction file includes this sentence: "If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding." This is before I boot from the CD.
If I undock from the ThinkPad X6 UltraBase then how can I boot from the CD??
Should I just ignore the instruction to undock?
Sorry if this seems silly but I'm a bit paranoid about updating the BIOS.
FYI here is the download page at lenovo: http://tinyurl.com/248kwp
Thanks for any clarification
Mike

Mike,
go to this site, it's a heck of alot easier to use. On the other hand you can also use system update, it'll get most automatically for you. For SU make sure .NET Framework v.2.0 or later is installed.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Searching for BIOS Update (UEFI) for HP 650 - need the right Version

Hey there,
my Bios is broken and for recovering I need:
BIOS Update Unified Extensible Firmware Interface (UEFI)
for HP 650
Can someone help me?

Thanks for the information. It does help.
If you removed the original partitions then you are correct, UEFI is no more. That is why the Startup menu does not appear.
You will need to use the recovery disk set or USB thumbdrive media that you created and put aside. That was your plan "b". Booting into Recovery Manager and performing a factory image recovery will restore the original partitioning scheme and the UEFI environment.
There does exist a possibility of recovering a BIOS.
Put a BIOS ROM file on the root of a USB thumbdrive formatted in FA32.
Plug it into a USB port.
Plug in the power adapter and verify that the power led is lit.
Press the Power button and hold the Windows key and tap the "B" key
Your notebook may recover the BIOS at that point.
There is no guarantee that this will work. You may end up having to send it in to HP to recover the BIOS and operating system.
I will edit this and supply a link to a BIOS right here. Use the F.12 version on this page. You will need Winrar or winzip or 7zip to extract it from the softpaq and copy to the thumbdrive.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

REQUEST: Latest BIOS update for MSI GTX 970 Gaming 4G card

Hi, I'd like the latest BIOS version for my MSI GTX 970 Gaming 4G card. I don't know what the serial number is, I don't have the box anymore. I've attached my BIOS file I saved through GPU-z. Thanks in advance!

Quote from: Nichrome on 07-May-15, 04:01:10
Hi
Check graphics card itself, should have a sticker with S/N. Else it might be hard (or impossible) to provide correct vBIOS.
Thanks! S/N: 602-V316-09SB1410116XXX

Request for future updates.

Please figure out how to stop changing my desired settings.
Every time you push an update you are altering my save as preferences.
When using CR Save Image, I am able to select my default File Naming scheme, File Extension, File type, Metadata, and Quality level.. But with EVERY update of the software, this gets reset. STOP IT!

Some folks may not be clairvoyant, but I actually do have almost a sixth sense with regard to what other people are saying.
0. You posted something difficult for someone who doesn't use Photoshop just as you do to understand, and you posted it in an abrupt tone, as though you're in charge.
1. Station_two had a little trouble understanding you were talking about the Save dialog in Camera Raw - or assumed others might have such trouble - and may have felt a bit put off by your tone, so he requested you to try to relax and do a more complete and detailed job of writing up your request. He provided a helpful link that basically says those things.
2. You either didn't "get it" and/or are still upset and are looking for confrontation rather than problem resolution.
Now, as to your original issue...
It would likely be more pertinent for you to ask the Camera Raw folks in the dedicated Camera Raw forum. The Camera Raw developers hang out there: http://forums.adobe.com/community/cameraraw
Though I was able to derive what you're asking, you would do well to describe a bit more of the context, and maybe even put up a picture so that everyone knows just what settings you're talking about in what dialog. Edit: I see you've done some of that in your most recent post above.
I get the feeling that the saved settings in Camera Raw have a different format each new version, they may be stored somewhere else (or in a different format), and there's some effort to migrate settings from version to version. It may just be that this particular group of settings has been overlooked, and by asking nicely you might get your wish. There's also a site for requesting new features: http://feedback.photoshop.com/photoshop_family
Everyone understands that using this software can be frustrating at times, and we all paid the high prices, but just keep in mind that most of the folks here are just other users, trying to be helpful, and people can get offended by a person with an attitude. It's been proven time and again that using a forceful tone is less likely to get you positive results than being humble and asking nicely. I've done it too - and it just doesn't work.
-Noel

Tecera A4 Wrong Image Size for Bios update....

using the site tools to id the machine to bios...it led me to a file named...sm45v20.exe, which i downloaded & attempted to update the bios...via floppy / usb drive method.
Done this with other machines (not this one) hundreds of times before...(fix a lot of friends machines...as this is). in the readme, it states this bios is for this string of machines...
Tecra A4
Tecra A4-S111TD
Tecra A4-S211
Tecra A4-S216
Tecra A4-S231
Tecra A4-S236
Satellite M40-S417TD
Satellite M45-S165
Satellite M45-S1651
Satellite M45-S265
Satellite M45-S2651
Satellite M45-S2652
Satellite M45-S2653
Satellite M45-S331
Satellite M45-S3311
Satellite M45-S351
Satellite M45-S3511
Satellite M45-S355
Satellite M45-S3551
where the tecera a4 is model I'm working on.
However, when booting into the update, it goes through the startup....reads the existing rom image...then attempts to look at the disk version...and gives the wrong image size message. Usually, this means ether you've got the wrong bios image (hmmm...toshiba led me to it...so maybe it's wrong...but readme says it's ok) OR the download was corrupt. Re-Downed the entire set up file again (file name as mentioned above) and tried again. All disk work on my master workstation which is almost always correct. (except when it's not?)
Any ideas? What the heck is the A4 anyway? Seems like a very rare model....
<edit>...the ENTIRE model number as shown on the bottom label is: PTA40U-1D701F </edit>
Message Edited by SetiRich on 04-16-2009 05:53 PM

This is a maybe...
Does the A4 in question have Intel video or ATI or nVidia?
Looks like there are different BIOS files depending on the video chipset.

Request for BIOS update MS-16GA

Similar Messages

Maybe you are looking for